Invoice numbers for a purchase order

Hello Experts,
For a particular purchase order, there are 2 invoice numbers in the R/3 system. But when i am running a certain BW report, which displays the invoice numbers for a PO, it is showing ony one invoice number. Please advice.

Hi,
I think ur BW report shows the cleared Invoice no. The second invoice no. might not have been extracted to BW system. Check your order no. in Cube whether it has two invoice nos.
Regards,
Suman

Similar Messages

Set the final invoice flag for a purchase order

I want to know how to set the final invoice flag for a purchase order.
I tried BAPI_PO_CHANGE but it is giving me error.
Help me.

Hi,
I think ur BW report shows the cleared Invoice no. The second invoice no. might not have been extracted to BW system. Check your order no. in Cube whether it has two invoice nos.
Regards,
Suman

Configure partial invoice distribution for SRM Purchase Order

Hello Experts,
We are on SRM 5.0 SP12 and ERP 6.0 SP13. When a split accounting purchase order is created in SRM and transfers over into SAP, partial invoices are automatically posting with the distribution of "Distribute to following row". In ME23N under account assignment, there are three options for partial invoice postings:
1) Derive from account assignment category
2) Distribute to following row
3) Distribute proportionally
We would like to default the third selection, "Distribute proportionally". Does anyone know where this setting can be changed or how to do this?
Thanks,
Brett

SAP was able to provide assistance on the issue. Here are the details:
The SRM always sends to ECC the "Distribute to Following Row" selected,
and sometimes configuration changes in tcode OME9 have not effect,
possibly due to the Support Package.
To specify the correct option "Distribute Proportionally", it is necessary to use the Badi BBP_PO_INBOUND_BADI...
The partial invoice indicator is set to '1' by default in SRM, it is
standard behaviour, you can check it in the LBBP_BD_DRIVER_46AF15
program. The functionality that allow has the value ´2´ to partial
invoice indicator is exclusive to MM - R3 system.
You have two possible solution to create from EBP to backend some PO
documents with multiple account assignment and partial invoice
indicator = 2 (Distribute Proportionally):
a) To use the Badi BBP_ECS_PO_OUT_BADI to create the PO this way.
ls_ct_bapi_poitem-PART_INV = '2'
Effectively, this solution change the setting in the backend
to 'Distribute Proportionally'.
b) Partial invoice indicator can either be set in OME9 in the Backend
for the posted account assignment category (e.g. K - cost center)
or default using Backend Badi:
BBP_PO_INBOUND_BADI
BBP_POITEM-PART_INV
-> Part_INV is a field of BBP_POITEM. In the backend BADI, if you
look at the field of BBP_POITEM, you will find PART_INV. You
have to use the BADI to set this field.
OME9 was the tcode in MM to specify the partial invoice settings for each account assignment. According to SAP, sometimes this works with SRM (since the default setting sent to ECC from SRM is "Distribute to following row") and sometimes it doesn't. We ended up changing the partial invoice flag upon creation of the purchase order through the BADI mentioned above since the configuration changes did not remedy the issue. Now the partial invoices are posting proportionally which has resolved all of our split accounting posting issues.
Thanks,
Brett

Error when posting invoice for Asset purchase order

Hi,
we are getting the errore message account determination for asset posting with keys not defined in chart of accounts,when posting an invoice for asset purchase order.
Can any one see why this error is coming and what will be the solution.
Nagesh

Hi Prabhakar,
Here is the reply,
we have 10 line items,in which 3 items are freight related and other 7 items are related to goods reciept.
i am trying to enter invoice for 3 line items at a time with two relevant to goods reciept and other related to non goods receipt(freight related).
accounting entries generated after the GR are as follows,
asset under construction account,and GR/IR account.
Let me know the details is sufficient or not.

Table to show thw invoice for a purchase order

In which table we can see the invoice for a purchase order?Or in which t code.

Hi,
Go to table EKBE in SE16/ SE16N and give the PO number and value "2 (Invoice receipt)" in the filed "Transaction/event type, purchase order history"
Regards,
SDNer

How to Park the single invoice for multiple purchase orders

Hi,
How to Park the single invoice for multiple purchase orders?

brother this is possible to enter one Invoice fro multiple purchase order.
call transaction MIR7, select " purchase order/Scheduling Agreement" from the PO refernce Tab. then click on arrow. give your purchase orders here.
Thanks

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

GR Based IV tick for Import Purchase Order

Hello Friends
Whats the significance of keeping GR based IV check box as unchecked for import purchase order.I am selecting this indicator and still i am able to do the process as follows
1. ME21n 2. MIRO (BOE capturing) 3. MIGO 4. Post Excise invoice 4. MIRO (Material Vendor)
Still could not understand why this indicator is suggested to keep as unchecked for import purchase order processing.
Please clarify.
Regards
Vivek sharma

Hi
For import POs , it is required that the GRbased Inv ver key removed, as we need to pay the amount due to the customs. We are yet to receive the material in our Goodown i.e goods receipt is yet to be done but payment to Customs has to be made only then material GR can be carried out. You have to enter manula values(amounts) for this to be processed. What you said reg the MIRO rpocessing evenefore Material receipt, this is possible , duirng MIRO you need to anter the quanity and the correspondingamount to be processed. While if you have GRbased Inv.verification then you need not enter material quanity or value manually which is automatic.
Regards

"Material Invoice Cycle- field" in the Invoice tab of the Purchase Order?

Hi,
Does somebody has a clue on the field "Material Invoice Cycle- field" in the Invoice tab of the Purchase Order?
What are the functions, dependencies and the scenarion one can use this field.
Regards

Hi
Here in Is-oil we have invoice cyles. Provisional invoice, Final invoice, interested invoice, settlement invoice etc..
So in sales at first provisional invoice has been created than the final invoice based on the Provisional invoice.. and further invoices like interest invoice & settlement invoice ..
So here we are using 4 invoice cycle.. hence you have to define in the Spro-->industry solution -->oil & gas > cross component application>maintain the invoice cycle numbers... 4
And this data has to be used in Condition type
Spro--> industry solution -->oil & gas > cross component application> MM split invoice -->Enter the data in additional invoice .
These is the function of Material invoice cycle field...
Thanks and regards
Raja

Invoive booked amount for a Purchase Order for a vendor

how is Invoive booked amount for a Purchase Order against the respective vendor in available in tables

Hi,
These are the tables where you can get the invoice amount details for a purchase document.
EKBE-History of purchase document
BKPF-Accounting document header
BSEG-Accounting document segment
RSEG-Document item-Incoming invoice.
Regards,
Rambhupal reddy

Automatic account postings (for Intercompany Purchase order and Sales order

Hi all,
I need some help related to the automatic account postings (for Intercompany Purchase order and Sales order)which i can set for the follwoing scenarios. I have looked on the forms and searched alot but not able to a single solution to solve both the pupose. if one scenario works the other doesnt. Please advise.
I have created the master data
Customer receiving--G001
Sales Org.--GXIN
Distr. Channel- 01
Division - 00
Company code receiving - G1
customer supplying- V001
company code for supplying- V1
2 different scenarios
1- Intercompany Purchase order in which a Customer receiving- G001, gets stock replenishment NB purchase order from supplying company V1- GI and GR of stock is done. Biling document for customer receiving G001 is created. But now I need a way to do the opposite side posting at the supplying customer -V001-- this I do using an Idoc which creates a Invoice receipt for creditor(supplying customer) V001.
2. Sales order-- A customer X001 of company code G1 buys stock from the company code V1. the customer G001 of company code G1 bills the customer X001, but the intercompany billing doc/ invoice is created for the customer G001 by company code V1. then now i want an automatic account posting to be created at the supplying customer V001 via idoc.
Can this be achivable via Idoc with automatic account postings.
Please let me know if it doesnt make sense. thanks to all in advance
cheers
Jasmeet

Hi all,
For the Sales order and automatic posting we have created an output type ZR4N- this is creating a batch input session which can be triggered to be processed autmatically.
For the intercompany Purchase order -from Invoice we are creating a different output RD04 (sap standard) which creates invoice receipt at the vendor side.
Rest of the settings are defined using SAP standard functionality within transaction OBCA, OBCB, OBCC, OBCD,OBCE
thanks for viwing the post
Cheers
Jasmeet

Copy Control For Individual Purchase Order

Hi, experts,
can you explain to me concretly how to customize the copy control for individual purchase order? We have of course the item category TAB (billing relevance: delivery-related billing) and Sales Order (delivery related billing type: F2). How will the copy control customized with tranc.VTFL? Please give me hints at both header level and item level. I appreciate your help.
Best regards,
Fan.
Edited by: Fan Mou on Jul 22, 2009 11:49 AM

Hi Fan Hou,
The individual Purchase order scenario is as:
Sales order >Purchase Requisition>Purchase order-->Good receipt --> Delivery and PGI --> Billing(wrt Delivery)
The creation of purchase requisition and thereby purchase order is controlled by the schedule line(in std CB). The goods are received with ref. to PO.
As far as copy control is concern it will be as
1)OR-->LF and item category will be TAB
2)LF-->F2 at header level .( can refer the std, )
at item level it will have item category TAB.and will be as
Copying requirements 004
Data BARK/BURP 001
Billing quantity B(Delivery quantity less invoiced quantity)
Pos./meg. quantity +
Pricing type G
For further reading /reference you can go through the:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
Hope this will help you.
Revert us in case of any issue.
Regards,
Atul

How to Configure Invoice Address tab on Purchase Order - Header Level

Hi Gurus
Please assist
My client want to add the Invoice address on the Purchase Order level Tab, it must be automatically pull through to all the Purchase Orders as they have one Invoicing address.
Currently the suppliers send invoices to plants instead of HEAD OFFICE for payment
Regards
Susan

Hi,
Tax condtions shd be given by functional consultants.ABAPers cant decide the tax condtions.
you can have these condtions in KONV table.
In item level vbrp-posnr = konv-kposn.
ekpo-ebelp = konv-kposn
at header level as said in the below thread
Just see this and get back if any concerns
Regards
Edited by: Rasheed salman on Dec 2, 2008 6:20 AM
Edited by: Rasheed salman on Dec 2, 2008 6:22 AM

Disabling spool request generation for a purchase order

Hi,
I have a requirement as follows :
In ME22n, according to standard configuration for a purchase order whenever the indicators 'Deliv. compl' or 'invoice flag' is checked or unchecked and saved, a spool request is generated. This spool request can be viewed in messages tab of PO.
My requirement is to disable the spool request generation on change of the above mentioned indicators.
I have found a user exit 'EXIT_SAPMM06E_016' which is triggerred on clicking on 'SAVE' of PO.
I am unable to find the field or structure with which i can disable the generation of spool request.
Your help is much appreciated!
Thanks & Regards,
Richa Aggarwal

Richa,
you can replace 101 with your routine number. who said you cannot? in NACE, output procedure
the code in 101.
FORM KOBED_101.
LOOP AT XNAST WHERE KSCHL EQ KOMT1-KSCHL AND
                      OBJKY EQ MSG_OBJKY   AND
                      AKTIV EQ SPACE       AND
                      VSTAT EQ '0'.
    EXIT.
ENDLOOP.
CHECK SY-SUBRC NE 0.
SY-SUBRC = 4.
CHECK ( KOMKBEA-DRUVO EQ NEU OR KOMKBEA-DRUVO EQ AEND ).
CLEAR SY-SUBRC.
ENDFORM.
*       FORM KOBEV_101                                                *
FORM KOBEV_101.
LOOP AT XNAST WHERE KSCHL EQ T683S-KSCHL AND
                      OBJKY EQ MSG_OBJKY   AND
                      AKTIV EQ SPACE       AND
                      VSTAT EQ '0'.
    EXIT.
ENDLOOP.
CHECK SY-SUBRC NE 0.
SY-SUBRC = 4.
CHECK ( KOMKBEA-DRUVO EQ NEU OR KOMKBEA-DRUVO EQ AEND ).
CLEAR SY-SUBRC.
ENDFORM.
so you can copy the code from these forms, and keep them before your code in your custom routine,.. like:
FORM KOBED_901. "==> i am creating a new VOFM routine 901 here
LOOP AT XNAST WHERE KSCHL EQ KOMT1-KSCHL AND
                      OBJKY EQ MSG_OBJKY   AND
                      AKTIV EQ SPACE       AND
                      VSTAT EQ '0'.
    EXIT.
ENDLOOP.
CHECK SY-SUBRC NE 0.
SY-SUBRC = 4.
CHECK ( KOMKBEA-DRUVO EQ NEU OR KOMKBEA-DRUVO EQ AEND ).
CLEAR SY-SUBRC.
"==> from here add your code.
data:lv_subrc type sy-sibrc.
if xyz NE asdasd "==> your validations..
lv_subrc = 4.
endif.
sy-subrc = lv_subrc.
ENDFORM.
*       FORM KOBEV_901                                                *
FORM KOBEV_901.
LOOP AT XNAST WHERE KSCHL EQ T683S-KSCHL AND
                      OBJKY EQ MSG_OBJKY   AND
                      AKTIV EQ SPACE       AND
                      VSTAT EQ '0'.
    EXIT.
ENDLOOP.
CHECK SY-SUBRC NE 0.
SY-SUBRC = 4.
CHECK ( KOMKBEA-DRUVO EQ NEU OR KOMKBEA-DRUVO EQ AEND ).
CLEAR SY-SUBRC.
"==> from here add your code.
data:lv_subrc type sy-sibrc.
if xyz NE asdasd "==> your validations..
lv_subrc = 4.
endif.
sy-subrc = lv_subrc.
ENDFORM.

Different exchange rate in tables FMIOI and FMIFIIT for same purchase order

Hello,
I'm working in ECC 6 system with Former budget. My company code is in EUR currency.
I create a purchase order in 100 GBP and the exchange rate entered in the purchase order is 0,83 GBP for 1 EUR (100 GBP = 120,48 EUR).
When I create an invoice linked to the purchase order, the exchange rate is 0,85 GBP for 1 EUR (100 GBP = 117,65 EUR).
in the table FMIFIIT, the amount for the invoice is 117,65 EUR.
and in the table FMIOI, the amount for the reduction of the PO is 120,48 EUR.
Why is the reduction of the purchase order taking the exchange rate from the PO? and not from the exchange rate of the invoice?
Normally, the reduction of the PO should have the same amount as the invoice.
Could someone help me about this?
How can I do to correct the amount in EUR for the PO?
Thanks for your help.
Regards,
Chiachen

Hi,
Normally, the reduction of the PO should have the same amount as the invoice.
This is incorrect, please consult note 418914.
So, the situation you describe is normal behaviour, under assumption that your unit of measure is updated on value-based level.
Regards,
Eli

Invoice numbers for a purchase order

Similar Messages

Maybe you are looking for