Invoice table can't have rows added?
I've been trying to use the invoice template, but adding new rows completely wipes out the formatting. Is there a way I can add a new row and still maintain the ability for the table to calculate the row and add it to the total below? I've tried copying the working cells, pasting them, then deleting the text and entering in the new information... but although it calculates the subtotal at the end of the row, it doesn't apply that subtotal to the end result at the bottom of the page.
Any thoughts?
I've seen people suggest adding a row using the inspector, and this seemed to solve the problem for others... but it doesn't work for me. shrug
The way you use tables implies a different behaviour.
In Tableau 1, the row in which I calculate the SUM is just below the last 'row to sum'.
In B7 the formula is =SUM(B2:B6)
When we insert a row above row 7 or below row 6, the formula remains =SUM(B2:B6)so, the value entered in B7 is not summed.
In Tableau 2,I left a blank row between the last used one and the one used to sum.
If we insert a row below row 6 (the last used one) as I did in Tableau 2-1, the value entered in B7 is not summed.
If we insert a row above row 7 or above row 8 as I did in Tableau 2-2, the value entered in B7 is summed.
Last not least, if we add a footer row at the bottom of the table.
We are always able to insert new 'current' rows.
In B8 the formula is =SUM(B).
Yvan KOENIG (from FRANCE dimanche 30 novembre 2008 18:59:51)
Similar Messages
-
When working in a Table can you have it add numbers in a column?
I know it can be done on a spreedsheet, but can it be done in a Table and if yes how?
In a word, no.
AppleWorks Tables handle only text.
But instead of using a table, you can insert a spreadsheet frame and get all the functions of a spreadsheet.
Regards,
Barry -
Dear all,
We're trying to find out purchase order invoice tables. We have found RBKP as header and RSEG is material detail. However we cannot match any of them with MSEG material transactiond because any of them does not contain MSEG document number as a reference document or something. Also we've tried BSEG bur it is the same story. Can anyone tell us that if there is a table which links MSEG (material transactions) and RSEG (purchase invoice items) ? Thanks in advance.
Levent ArslanHi there,
I am not sure if there's anything that matches your need. You might want to link a PO table like EKPO inbetween via a query -SQVI
Other wise you should have referenced or mentioned the Gr # in teh invoice.. which is the only way you can link them
You can also link it via GR/IR account, however not sure if this fits your need. -
Z database table needs to have field creation/update/deletion tracked
Hi,
I have a Z database table.
I have a program that gets data from an excel file and uploads the content to the Z database table.
I need to track the creation/update/deletion of the records in the Z database table.
The Z database table can also have records changed/updated/deleted manually thru table maintenance. These changes also need to be tracked.
How do I do this?
~ EricHi
For a my z-table (called ZFAGTD01), I created the object for change documents, this is the log after generating it:
Change documents: Display information about generated sources
Change doc. object Z_PROAGE_PRV
Generation on 23.07.2004 11:51:28
of SVIL01
Include programs and function modules
Data declaration, TOP...................... FZAGPCDT
Consisting of............................. FZAGPCDF
and....................................... FZAGPCDV
Update function module..................... Z_PROAGE_PRV_WRITE_DOCUMENT
Call update function module................ FZAGPCDC
Dictionary structures
VZFAGTD01
Just as you see, the system has created the fm and some includes containing all data it needs to call the fm.
So u need only to use those includes, just only u need to consider before calling the fm u need to fill:
- The change flag: usually called UPD_<Z table>;
- Fill the header Y<ZTABLE> of z-table with old data;
- Fill the header X<ZTABLE> of z-table with new data;
- Fill the variables TCODE, UTIME, UDATE, USERNAME,
- Fill the variable OBJECTID with the key of Z-table
For example my object is used in my program in this way:
FORM INSERT_CHANGE_DOCUMENT.
CHECK FL_CHANGE_DOC = 'X'.
CHECK SY-SUBRC = 0.
CONCATENATE XZFAGTD01-MANDT XZFAGTD01-BUKRS XZFAGTD01-GJAHR
XZFAGTD01-BELNR INTO OBJECTID.
TCODE = SY-TCODE.
UTIME = SY-UZEIT.
UDATE = SY-DATUM.
USERNAME = SY-UNAME.
* Load old data: header
IF ZFAGTD0K IS INITIAL.
CLEAR YZFAGTD0K.
ELSE.
SELECT SINGLE * INTO YZFAGTD0K
FROM ZFAGTD0K WHERE BUKRS = XZFAGTD01-BUKRS
AND GJAHR = XZFAGTD01-GJAHR
AND BELNR = XZFAGTD01-BELNR.
ENDIF.
* Load old data: items
SELECT * INTO TABLE YZFAGTD01 FROM ZFAGTD01
FOR ALL ENTRIES IN XZFAGTD01
WHERE BUKRS = XZFAGTD01-BUKRS
AND GJAHR = XZFAGTD01-GJAHR
AND BELNR = XZFAGTD01-BELNR
AND POSNR_P = XZFAGTD01-POSNR_P.
SORT: XZFAGTD01 BY POSNR_P,
YZFAGTD01 BY POSNR_P.
* Check if heade was changed
IF YZFAGTD0K <> ZFAGTD0K.
UPD_ZFAGTD0K = 'U'.
ELSE.
CLEAR UPD_ZFAGTD0K.
ENDIF.
UPD_ZFAGTD01 = 'U'.
PERFORM CD_CALL_Z_PROAGE_PRV.
REFRESH XZFAGTD01.
ENDFORM. " INSERT_CHANGE_DOCUMENT
Max -
Can't delete newly added row in inner advanced table
Hi!
Im using advanced in advanced table and i can't delete a row after i added in detail table, i have to refresh the page in order to delete the row.
This is what i do.
execute query from master table
expand row in master table
click Add row button in detail table(standard button in footer)
add data in columns
click save button
select row with multiselect and then click delete button but nothing's happend i just can delete older rows
also i can't edit the new row just older rows.
i think that is something wrong with the cache :S
any ideas?
thanks!
Edited by: 892088 on 03-nov-2011 16:06still no answers, the problem is with the new row created because i cant delete or modify it.
any comment? -
Can't add row using table sorter
I had a jtable with my own mytableModel that implements AbstractTableModel. In mytableModel, I have addRow, removeRow... so I can delete/add row dynamically by calling mytableModel.addRow(..). Everything works fine.
However, after I added the table sorter and table map (got the code from the tutorial).
MyTableModel myModel = new MyTableModel();
TableSorter sorter = new TableSorter(myModel);
JTable table = new JTable(sorter);
sorter.addMouseListenerToHeaderInTable(table);
Now, when i call mytableModel.addRow(..), it doesn't work anymore. It doesn't add a row anymore, why?
Thank you so much for your help.I don't have a addRow method in TableSorter. My addRow method is in myTableModel. So, when I need to addRow, I called myTableModel.addRow, In my addRow method, I have fireTableRowsInserted method. This used to work using integrating with TableSorter.
Do I need to move all my addRow, addCol....DelRow... to TableSorter? The table data are stored in myTableModel. I guess I really doesn't know how the TableSorter work :(
Thanks -
Issue in adding not null constraint on 250 G table with 50 million rows.
Guys,
I need to add not null constraint on 2 column of a table with 50 million rows and ~250 GB in size, These 2 columns are newly added and I have also update the value for each of these columns to not null for each row.
After that I am adding not null constraint on these 2 columns this is taking 1 hour to complete, Is there any way to speed up this, I don't want to use ENABLE NOVALIDATE option or rather I can't use that option.user445775 wrote:
Guys,
I need to add not null constraint on 2 column of a table with 50 million rows and ~250 GB in size, These 2 columns are newly added and I have also update the value for each of these columns to not null for each row.
After that I am adding not null constraint on these 2 columns this is taking 1 hour to complete, Is there any way to speed up this, I don't want to use ENABLE NOVALIDATE option or rather I can't use that option.And what's wrong with it taking an hour? Presumably, this is a one time operation, and it doesn't really interfere with anything else. -
How can I delete rows in a table from the bottom?
I have table that I add rows to and I want to remove rows starting with the last row. For example if I have a table with 20 rows how do I remove rows 16-20. I can't figure out how to do this.
The following script would/should/might delete the last 4 rows of a subform named 'itemsSub' : (or actually deletes the last row 4 times hopefully!)
for (var f = 0; f<4; f++)
_itemsSub.removeInstance(itemsSub.all.length - 1); -
How can i update rows in a table based on a match from a select query
Hello
How can i update rows in a table based on a match from a select query fron two other tables with a update using sqlplus ?
Thanks Glenn
table1
attribute1 varchar2 (10)
attribute2 varchar2 (10)
processed varchar2 (10)
table2
attribute1 varchar2 (10)
table3
attribute2 varchar2 (10)
An example:
set table1.processed = "Y"
where (table1.attribute1 = table2.attribute1)
and (table1.attribute2 = table3.attribute2)Hi,
Etbin wrote:
Hi, Frank
taking nulls into account, what if some attributes are null ;) then the query should look like
NOT TESTED !
update table1 t1
set processed = 'Y'
where exists(select null
from table2
where lnnvl(attribute1 != t1.attribute1)
and exists(select null
from table3
where lnnvl(attribute2 != t1.attribute2)
and processed != 'Y'Regards
EtbinYes, you could do that. OP specifically requested something else:
wgdoig wrote:
set table1.processed = "Y"
where (table1.attribute1 = table2.attribute1)
and (table1.attribute2 = table3.attribute2)This WHERE clause won't be TRUE if any of the 4 attribute columns are NULL. It's debatable about what should be done when those columns are NULL.
But there is no argument about what needs to be done when processed is NULL.
OP didn't specifically say that the UPDATEshould or shouldn't be done on rows where processed was already 'Y'. You (quite rightly) introduced a condition that would prevent redo from being generated and triggers from firing unnecessarily; I'm just saying that we have to be careful that the same condition doesn't keep the row from being UPDATEd when it is necessary. -
I have many bookmarks that I like to have readily available on the toolbar. With the older versions of Firefox, I was able to have multiple rows of icons that I grouped by topic. I have now wasted a lot of time trying to find a way to have multiple rows in version 4.0. I do not want to use the down arrow on the right.
This can be done by adding a userstyle with the Stylish add-on.
# First install the Stylish add-on - https://addons.mozilla.org/en-US/firefox/addon/stylish
# Go to http://userstyles.org/styles/29428 and click on "Install with Stylish"
# Restart Firefox and you should then have a multi-row bookmarks toolbar. -
In ADF how can i insert data in multiple table if they have foreign key
I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
Thnak you very much.Hello,
Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
3> i made that association composite by clicking the checkbox
4> i created 2 VO from 2 EO.
5> put those VO in Application Module.
6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
Now what to do please? -
Limit on the number of partitions a table can have
Hi,
It's been quite some time I'm thinking of a simple and the best solution to a performance issue in my application. Benefiting out of partitioning the table seems a simplest approach; it involves very minimal changes to my application code and in addition, it keeps the overall application logic 100% intact. However, at times, the number of partitions required can grow to as large as 500 thousand. I know of another application implementing as many as 50 thousand partitions for one of its tables. I'm wondering if Oracle recommends or poses any limit to a number of partitions the table can have. How does that limit, if it exists, vary if each of my table partition holds only a small amount of data; say, not more than 2 thousand records each of 1 KB size. What are the important considerations that one needs to keep in mind while creating the huge number of partitions for a table?
Any inputs on this would be a great help.
Thanks,
Aniruddh
ps: Consider Oracle releases 10g onwards.
Edited by: Aniruddh on Dec 30, 2009 9:46 AM
Edited by: Aniruddh on Dec 30, 2009 9:50 AMAniruddh,
>
What are the important considerations that one needs to keep in mind while creating the huge number of partitions for a table?
>
I doubt if you are using partitioning for the right causes. Please explain how is your data structured and why you need to create so many partitions..?
when creating partition, you need to consider..
a) why you need to partition?
b) how is your data structured
c) how your data is indexed.
d) What kind of queries would you firing on this table to get the data. Will they use the partition key ?
Thanks,
Rajesh.
Please mark this/any other answer as helpful or answered if it is so. If not, provide additional details/feedback.
Always try to provide create table and insert statements to help the forum members help you better. -
In numbers, can i hide rows of data in a chart and still have that data show up in my graph?
yes.
To hide rows (or columns), select the rows (or columns), then right click in the row (or column) tab to expose the contextual menu. Select the menu item "Hide ..." -
Why is Verizon not adding my data add ons when I sign in and try to use the service? I have been adding on since early November and I had to get another refill card. I don't have any data on my prepaid phone. Where is my data? I can't use my prepaid. I need help.
2BNatural,
I am so sorry to hear of the issues you are having with adding data. We definitely want you to be able to have access to your data added. I apologize as we are unable to access prepaid accounts. Please reach out to our prepaid department at 888-294-6804 for further assistance.
LindseyT_VZW
Follow us on Twitter @VZWSupport -
Max no of feilds a database table can have?
Hi all,
Can some body tell me Max no of feilds a database table can have?
Thanks a lot - ChandanHi Chandan,
You can refer the below link ( check the sub heading constraints).
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21eb6e446011d189700000e8322d00/content.htm
Regards,
Siva.
Maybe you are looking for
-
I cannot update my Windows 7 desktop with itunes 10.5? .....
-
An error occurred when loading the Cube ; Analysis services 2012
Hi All We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2. All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are
-
Unable to change X-axis values in playback
I need help with an issue in SignalExpress which I am new to and struggling a bit. In PlayBack mode DisplayView I can't get the X-Axis to retain the values I set. I can change them but as soon as I click 'play' the max value alters to what appears to
-
Currently if you create an activity against a service call the call number and source are copied to the activity as Source Object Type service call and Source Object No. as the call number. If you close this activity and create a follow up activity t
-
Adobe Flex 3 Plugin / JBuilder 2007
Can the Adobe Flex 3 plugin be installed with JBuilder 2007 (since built on Eclipse)? If yes, then please let me know where the Eclipse directory is located or how to setup properly? The system requirements on the MacOS X are as follows: Flex Builder