Iomega EZ Media Backup Center: Red light, HDD not working

Hello there, My nas does not work after a power outage, I would like to know how to change the HDD and install the firmware to use it again.
Sry for my english!

Hello luigylem
If your device is in warranty, you should contact LenovoEMC Support to check on what options may be available to you. If your device is out of warranty, I recommend checking here under the Iomega section for potential firmware downloads and guides on the process that would be needed to install the firmware on a new disk.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Similar Messages

Edit files remotely Iomega EZ Media & Backup Center

Hi,
I'm deciding which NAS to buy. I'm interested in Iomega EZ Media & Backup Center.
I want to know if it is possible to edit any files remotely (word, excel, autocad, corel, etc.) without having to previously download it to the pc I'm remotely accessing with.
I don't want to download the file, edit it, and then re-upload the edited file. Is too uncomfortable.
I have to use an app to do this or I can edit it directly from Windows Explorer or a web browser like Firefox?
Thinkin that maybe I'll access from a public pc and want to have the possibility to edit it directly.
I'll appreciate any comments. Thanks

Hello aleb21
You would need to install LSM on every remote pc/workstation to be able to mount/map the shares for file editing.
You can install LenovoEMC Link on your iOS and Android mobile devices. The application is intended to allow you to open documents, however since the application functions the same as the web user interface it would be more for viewing documents not editing. To edit files/documents you would need to download the file, edit on the mobile device, then upload the updated file to the NAS.
The video is correct, but does not go over the portion about connecting the remote computer using the personal cloud section of LSM. Basically you would do the following:
-Launch LSM
-Navigate to the Personal Cloud tab, click on "settings" on that tab.
-Enter the cloud name you created on the device's web ui. It can take a few minutes to find the cloud in some situations.
-Enter your NAS credentials created on the NAS or that are included in the invite email sent from the NAS.
-Once connected LSM's default is to auto-map/mount the shares that your user as access for to the remote computer. You can confirm this option by right clicking on the LSM system tray icon and make sure the "map drive letters" option is checked. You can also access the shares via the share tab in LSM, this will open an explorer/find window for you to navigate through the shares.
WebDAV is seperate from the web user interface (home page and content explorer). It would look similar to a basic FTP web interface when accessing via a browser. Just like the FTP protocol you could theoretically map the connection to explorer/finder remotely as a web/internet location with your external ip address. It should allow for remote editing.
For VPN, when accessing your cloud using LSM on a remote computer it would function like a VPN between your NAS and the remote computer. If you want to use a 3rd party VPN and not use personal cloud it should be possible, but may require your router or computer on the network to actually manage the VPN software.
For the camera question, with your setup the nas would not be a part of it unless you have the ip camera's setup to save data to the NAS. If that is the case you can setup the destination share the camera's are storing to for media sharing. This would allow the Media Server feature to stream the saved videos locally and/or remotely. Keep in mind that the media server feature does not do transcoding so the media receiver would need to support the file format the ip camera's store.
All lifeline os devices have a copy jobs backup option, however it does require knowledge of directory sharing from the source computer to work, see Host data backup using Copy Jobs
I personally recommend looking into the ix2-dl option as it:
-is under $100 USD
-can support up to 2x 6TB hard disks w/ RAID 1, 0, and NONE (JBOD)
-has support for SecureMind surveillance
-has a more powerful SoC processor
Hope this all helps with your decision.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

IOMEGA EZ MEDIA BACKUP CENTER

I have an EZ Media & Backup Center which was bought in the US and in which the Hard Drive stopped working, I have recovered the data from the burnt hard drive. Although the NAS is still within the warranty period but possibaly warranty would be voided as I opened up the drive.My question is -how do I install a new HDD with the Operating System,I'm in India now.Will Lenovo Support in India be of help.Any ideas would be appreciated.

Hello masterg7
At this point you may need to consider contacting a data recovery provider. If your device is in warranty, please contact LenovoEMC support for further assistance on restoring the unit to a factory software state.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Lenovo Iomega EZ Media & Backup Center ssh acces or twonky update

Hello,
I have a problem with playing video files with twonky server pre instaled on Iomega EZM. Video files are played correctly but no subtitles are visible. I installed the same server on ma PC and found out that ther reason is not correct tv profile for LG TV. There are two available LG DLNA Player and LG DLNA DMR and both are not working. Proper file should look like this:
name: LG DLNA custom
content:
<Client>
<DeviceId>

<DisplayName>LG TV 3</DisplayName>
<HttpRecognition>
<HttpText>LGE_DLNA_SDK</HttpText>
<HttpText>LG_UA</HttpText>
</HttpRecognition>
<DeviceDescriptionRecognition>
<DescriptionText><manufacturer>LG Electronics</manufacturer></DescriptionText>
</DeviceDescriptionRecognition>
<MappingUpdatePolicy>FIX</MappingUpdatePolicy>
</DeviceId>
<Adaptations>
<DLNA>
<Version>DLNA15</Version>
</DLNA>
<MimeTranslations>
<MimeTypeMapping>
<In>application/x-srt</In>
<Out>text/srt</Out>
</MimeTypeMapping>
</MimeTranslations>
</Adaptations>
<DeviceQuirks>
<Quirk>STOP_WORKAROUND</Quirk>
</DeviceQuirks>
</Client>
Now I would like to update Twonky server with this file, but form manage center ther is no way, and twonky configuration site also not allows any actions of this kind.
So i think that best way would be to acces system patition by SSH and add this file. How can I do it?
SSH is active but i can't login as root - don't know pass, and any typical combination of root, admin, administrator etc doesn't work
I think it would solve problem for many users.
Please help
Solved!
Go to Solution.

You log into SSH with your administrator username, and the password has "soho" appended at the beginning. So, if the admin password is "1234", then
e.g., username: admin password: soho1234
** Disclaimer ** use at your own risk ! If you are not familiar with Linux admin, you might not want to mess around.

Iomega EZ Media & Backup center upgrade problems

Hello there.
When prompted by email to upgrade my Iomega NAS from 4.0.8.23976 to 4.1.104.31360, I followed the usual procedure of downloading the file to a PC, uploading it through the web interface to the disk, and clicking the button launching the update. However, this time uploading ends with message "The software could not be updated."
Unfortunately that's pretty much all I know since the message doesn't contain absolutely anything else.
Any ideas on what's going on?

When you download it are you un-compressing it at all? You do not want to do that if you are. Also, make sure the file is .tgz file.
When the file is downloaded with Internet Explorer, the file which shows as a .TGZ file, may be downloaded as a .GZ file. This is a product of file MIME types built into Internet Explorer. This file is still recognized by the device as an update file.

Connect Iomega EZ Media & & backup center directly to the computer

hello,
Is it possible to directly connect this hard disk to the computer without internet box (router)?
In advance thank you
Sebastien
Solved!
Go to Solution.

You should be able to connect the Ethernet cable from the NAS directly to the computer, then you should be able to access it though Lenovo storage manager or by entering either the IP address or the device name in a browser URL bar. Typically, the device name is the model name.

How to enable config torrent service IOMEGA NAS EZ Media & Backup Center LENOVOEMC

Here you are a tutorial how to enable stand alone torrent service on IOMEGA NAS EZ Media & Backup Center
How to enable config torrent service IOMEGA NAS EZ Media & Backup Center LENOVOEMC
any ask do not hesitate to contact to me. Thanks
Roger Biderbost

Great info again, Roger
serene
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo EZ Media & Backup Center and SRT subtitle

When playing movies using the built in DLNA feature, will it be compatible with srt (or any other kind) subtitle?
In other words, if I store a movie with any kind of subtitle inside Lenovo EZ Media & Backup Center, and use a smart tv to play this movie by DLNA, will the subtitles be played?

Hello all,
When adding new .srt files to the Lifeline device running twonky, please be sure that the file name matches the video's file name except for the extension.
If the subtitles are not detected, try running a Twonky database repair from the lifeline web interface
(All Features> Media Server > Settings > "Repair Database") This is mentioned in past official twonky release notes for .srt files.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

My flash light is not working

My flash light is not working..My phone is a month old... and I only used the flash twice... Doesn't work at all... I tried different apps as well...

Backup and Restore
http://support.apple.com/kb/HT1766

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist

Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist

The Battery icon with the "X" indicates that your computer does not detect a battery and is operating on electrical power from AC since your computer is plugged in. If your battery is installed but not detected that indicates a problem: 1. the battery is dead; 2. the battery connector is not functioning properly. You mention that there is no response from the indicator lights so it could be either of the two possibilities. The noise is not a good sign. Best to shut it down safely while you can to prevent any possibility of damage and get it to an Apple Genius Bar or Authorized Apple Service Provider to discover the nature of the problem

I have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you may have to take the MBP to the Apple Store to have it checked.
Best

Lighting Effect not work in CS6*

Why Filter/ Render/ Lighting Effect not work in CS6?
It's not work only in CS6 Beta or in anything else :-/. It's Useful with me

A bit more information would be helpful. What is happening on your system when you go to lighting effects?
What system are you running on? What video card are you using? Are you using the most recent driver?
Do check our system FAQ as GPU is requried for lignting effects to work properly.
FAQ: What features use the GPU and how do I troubleshoot GPU issues?
Pattie

Iomega EZ Media Backup Center: Red light, HDD not working

Similar Messages

Maybe you are looking for