Ipad can no longer find my HP air printer although was perfectly fine before. Have tried turning both printer and ipad off and on - no joy. Printer says that it is connected to my wifi.
Just returned from holiday and my ipad can no longer detect my air printer, although working fine prior to that.
Have tried switching both off and on again - no luck.
The printer says that it's connected to my wifi as does the ipad.
Would appreciate any suggestions as I have found it very frustrating trying to get any help from the HP support sites.
Thank you
You're welcome. It's amazing how many problems can be sorted out simply by restarting ALL devices involved. That's my first troubleshooting step when I have issues like that - restart everything and try again.
I'm glad that it worked for you.
Similar Messages
-
HT4356 My ipad can no longer find my printer.
My ipad is a year old brought a new printer 2months ago worked very well up until last week when my ipad can no longer find the printer. Both can find the Internet but not each other any ideas ?
try tap Settings / General / Reset / Reset Network Settings
and reconnect to your network. If its password make sure you know it before you disconnect. -
drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?
Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.
-
After iPad update I can't access my notes! Crashes opening with blank page. I have tried turning on and off. I have tried the reset to original. I have tried downloading again. Now what? I have important information that I need to get....
If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.
-
HT4623 my ipad can no longer acces itunes store after iso 7 was installed... can i go back to ixo6
i can no longer access itunes store after iso 7 was installed... can i go back to iso 6
No you can't.
Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME for up to 30 seconds, until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any data settings. When your iPad restarts see if you can access iTunes. -
This is what happens when I log in on firefox only! "In an attempt to increase security, you are no longer able to use your personal email to sign into your myWalden portal. Please try again using your WaldenU.edu email." I am not logging in with my personal email, when I ask for password help this message appears making me think it is the Walden site, but I can log in with out a problem on any other browser:
"We are currently experiencing technical difficulties. Unfortunately, access to the myWalden portal is not available at this time.
We regret any inconvenience this may cause and thank you for your patience! " HELP! My college recommends your browser so I need it to work!Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Reload the web page and bypass the cache with:
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
See [[Keyboard shortcuts]] and [[Mouse shortcuts]] -
My iphone 5 says that it's connected to home wifi but I can't access the internet
We just got Comcast Xfinity internet installed and I have no idea if that's the problem (or if it's because our wifi does not require a password) but my iPhone 5 (and my boyfriend's) will connect to our home network wifi but when I try to use the internet, it gives me the message that "Safari cannot open the page because the server has stopped responding" or something to that effect. I have tried: 1) Forgetting the network and re connecting 2) Resetting network settings 3) Changing from DHCP to Static and back 4) changing the DNS number and 5) Calling AT&T Support (no luck there, either). The tech person did suggest (as weird as it sounds) that the fact that my wireless router does not have a password might be the problem and that once I password protect it, it could help. No idea.... Please help!
I figured it out! We have a modem (the new one that was given to us when we signed up with Comcast) and a wireless router. The network names on the two are different, so I called Comcast and they confirmed that the new Comcast modem puts out a wireless signal and that our network is connected to that one, not the old wireless router. So I checked to see if that network was available to connect to on my iPhone and it was! I entered the new password, forgot the old network, and it works!! Thanks for the suggestion to call Comcast!
-
I've tried restarting both devices, I've reinstalled the apps, I've reset both devices, I've logged out and back in, and I've tried on both wifi and cellular. Any help would be appreciated.
Also, I have purchased other apps and music on iTunes since the problem started.
-
My computer says that i'm connected to the wifi but I have an alert that says no internet connection
no internet connection
This means you're connected to the signal that your router is sending, however your router isn't connected to or sending out the wifi. You should read the user manual to indicate what the blinking lights indicate
or you can reset your router wtih it plugged into the modem and then setup the wireless connection in it.
you could also try turning on and turning off the modem and then turning off and then turning on the router before you reset it.
hope this helps -
IPad can no longer find my Current (home) Location.
Ever since returning home to Dubrovnik,Croatia (via Frankfurt Airport) my iPad still thinks Frankfurt is my Current location!
I can see from my Maps that it is centred on the airport there.
How do I re-set my iPad to recognise my real location as it obviously doesn't plan to do it automatically - I've been home over 4 days!
Thank you.Never was very good at "wait & see" so decided to try something!
Disconnected home Router.
Removed all Apps from iPad (not iTunes) calling for Location status.
Disabled Location Services - iPad Settings.
Shut down iPad and restarted.
Re-installed removed Apps from PC (iTunes).
Shut down iPad and restarted.
Re-connected Router.
Enabled Location Services.
Current Location found!!
It is of course entirely possible this operation coincided with the natural re-location process but I have my doubts!
Hope this helps...
Paul. -
IPad can no longer find my printer. Was working for two years. Laptop works fine
I have tried turning everything off and then on again, that used to work. Now I just get the message no airprint printer found. All software is up to date. iOS 5.1.1
Hp printer is an AirPrint printer. It is up to date and was working fine. Any suggestions?try tap Settings / General / Reset / Reset Network Settings
and reconnect to your network. If its password make sure you know it before you disconnect. -
Help!! The update on my airport is 6.3 I think. Shoot me!! I'm in graduate school and it's taking me all day to answer one discussion!!
Airport 6.3 utility requires ipv6 local link to work.
see http://support.apple.com/kb/TS4597
But older express may not show up even then. you need to install 5.6 utility so you can access them as well.
It is tricky but if you google around there are a number of methods listed. Here is what I do.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so. -
Everything used to fit. It was only after I removed the music to sync because this is considered a "new" library that the "Other" space appeared to this extent.
Since this first message, the "Other" space has increased exponentially. The first time, after the "restore", it increased to over 9 GB. Later, I tried a minor restore again, and now it's over 10 GB. I've seen someone suggest that text messages are to blame. If my text messages are suddenly taking up 4 GB of space, I think we've got bigger problems.
-
Can anyone help me? I tried redownloading the software and then I even reset safari bet nothing happened when I came home after 3 hours it worked but 30 minutes later I turn it on it does not work.
I use airport.I can't check for upgrades or any new software update, I can't accuss the Internet, and I can't watch what I want. I can't work on my homework, and I can't goof off I tried to look this problem up but no one else seems to have the same problem as me. I think it might have something to do with the server but I am not sure of to deal with it. I can't fix it on my own but even if I tried I think I would mess it up even more. Can anyone please help me i am in deep trouble I need it work by morning or I am screwed. :(
-
Why does my ipod touch say that it is connected to the wifi but it doesn't connect?
I am having this problem all the time now with my new ipod touch 4G and it always connects to the internet at my house but when I actually go to look something up on Google or Yahoo, then it says "Cannot Connect to the server" or something like that. Please help me! I don't wanna return it now if it is defective... WWSJD? (What Would Steve Jobs Do?)
Did you already try the troubleshooting mentioned in this article? iOS: Troubleshooting Wi-Fi networks and connections
Maybe you are looking for
-
Final Cut HD 4.5 crashes upon opening project
Hello, Any help is greatly appreciated. As we all are here, I'm in a HUGE panic. When I try to open my FCP project, it starts to open: the canvas, viewer, timeline and browser open, and I get to the "files offline" screen and FCP crashes. I have seve
-
Hi, I have created a table using se11. I would like to insert 100 records in table at a time. How I can upload this bulk data in the table. Thanks, Pratibha
-
Hi all, We are trying to installed the SAP ASE 16 database on Linux. But is it necessary to set ASE ODBC and the ASE ODBC driver manager? We are getting an error when we are trying to verify the connection to database.. By default it is using unixODB
-
Report works in CR10, on enterprise server error: Failed to open a rowset
Hi, I created a report, which works fine in Crystal Reports (designer). After uploading the report to the enterprise-server it don't work anymore. I use the same database and the same parameters, but get the following error: Failed to open a rowset.
-
ALV List in the same Column for the row CELL i need button or value
Hi, In my ALV list for the same column I need Button or Value for the different rows (CELL) depending upon my condition. as well as I have to make read only of 3 rd column CELL based on my first column dropdown value CELL for this Row Only. Depend