Ipad does not automatically roll between networks

We have 2 iPads. One does not automatically choose whatever wifi network it is in even having been in it before, such as our home network. How do i fix that?

Hello there, VickFromTX.
A great resource is the following Knowledge Base article that helps troubleshoot Wi-Fi on an iOS device:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Alternatively, you can use one of our iPad Troubleshooting Assistants as well:
Apple - Support - iPad - Wi-Fi Assistant
http://www.apple.com/support/ipad/assistant/wifi/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Similar Messages

My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago How can I restore this auto feature?

Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

HT1414 My iPad does not automatically update the operating system. Under the general tab in settings there should be Updates, but there isn't. Advice plz?

My iPad does not automatically update the operating system.how can I accomplish this?

Your post says you are on iOS 4.3.2. You need to be at least at iOS 5 to have a "Software Update" capability on your iPad. Right now, you need to update your iPad using iTunes on your computer.
Plug your iPad into iTunes (current version: 11.0.4). Let it sync. Then choose "Check for Updates" from the iPad's summary page in iTunes.

MacBook Air does not automatically connect to network

The MBA automatically connects to the network when the network broadcasts the SSID, however when I don't broadcast the SSID then I have to manually setup the network in order to connect to it. On a Windows PC running XP there is a checkbox that allows the computer to connect to networks that are not broadcasting the SSID. Is there any such thing for the MAC?

You can setup a network location on your mac and select a preferred network for the mac to join.
However there is no reason not to broadcast an SSID. It does not make you any more secure as wifi sniffing software can detect hidden networks just as easily as none hidden ones. It gives a false sense of security. The only wifi protection you should consider using is WPA or WPA2.
Is there any such thing for the MAC?
FYI a MAC is not a Mac
MAC=Media Access Control
Mac=Macintosh

TS1398 Ever since the last update, my IPad does not automatically get connected to our WiFi. Never had any problems until this last update. Is there any repair?? Its going on 2 years old and does not use the

If I go into settings and physically touch the WiFi that has been used since his was new than after waiting for 2 to 3 min it finally goes on line. I never had any problems until this last update. It always went on line automatically with out having to go into settings. Just a pain. Once I do this it usually stays on line.

Tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If that didn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections

Default mail client does not automatically download attachments when they are over 130Kb

Hi @ll,
default mail client on Ipad does not automatically download attachments when they are over 130Kb
Do you know if is possible to change this setting?

We have this problem as well. Unfortunately after years of only supporting IE and finally rewriting our site to be standards compliant we are going to have to force users back to IE because of this issue. It's not feasible for us to walk users through changing the default viewer. The default should stay Adobe (if installed) until a more robust native version is available. I understand you want to promote free and open tools but if they don't work, it's just not good enough.

IPad (3rd generation) does not automatically connect to wi-fi.

iPad (3rd generation) does not automatically connect to wi-fi. It is fully updated to 5.1.1 but you have to manually connect after turning off and back on. I also have an iPad 2 with the same OS but it automatically connects. The wi-fi has no security.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

HT4199 My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W

My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W

try disabling email scanning for incoming mail.
One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored.

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/

Ipad does not see airprint priner (HP 2545 all in one ink advantage) despite they are in the same wifi network.

I ve got Ipad 7.1.1 and use airprint printer HP deskjet 2545 ink advantage all in one series which is airprint. Ipad does not see it despite it is in the same wifi network. I have test it through printer. direct printing is available since Ipad finds printer while searching networks? I have allready turn off and restart everthing, reinstalled printer to my laptop to ckeck connection to wifi network, but still ipad cannot see airprint!!what can possilby be happening?

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

Does not automatically connect to recently used WIFI networks

Recently purchased 13" Macbook Air, with Lion installed. All's well, except upon start-up or waking up from sleep mode, it does not automatically re-connect to the WIFI network it was just connected to. Instead, I'd have to manually find the network to select it. (Incidentally, some of my friends who also use Macbook Air and Macbook Pros have also experienced this periodically.)
Another strange thing, is that there is this one particular WIFI network at work, that I've successfully connected to before, upon return the next time, all of a sudden, the network isn't even visible anymore. My OS5 iPhone sees it fine, and never has a problem, but repeatedly this happens. Other people at work who also use Macbook Pro and Macbook Air also encounter the same problem. People who are using PCs don't have the same experience.
Is there a setting somewhere? I have "Remember networks this computer has joined" checked, and I see the particular network listed as ones I've joined.
Any light that can be shed on this would be greatly appreciated. It's very frustrating, especially Airs don't have a built-in ethernet port. I hate using the adapter, it steals one of my USB slots.
Thank you in advance!

Hi sashton,
When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
Avoid giving your wireless network a common name (SSID)
http://support.apple.com/kb/HT4450
If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Thanks,
Matt M.

System does not automatically reconnect to wifi network after sleep/restart

My iMac G4 (2GB RAM, 10.5.1, AirPort Extreme) does not automatically reconnect to my wife network after waking from sleep or restart. I just recently switched the iMac from a wired to wireless set-up though the machine has always had the AirPort card. In wired mode, it always automatically found the network.
Network preferences have the "Ask to join new networks" checkbox selected. Below the checkbox it reads "Known networks will be joined automatically."
My wireless router is Linksys WRT150N, security type is PSK and encryption method is AES key.
Anyone have any suggestions?
Thanks!
bk

I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

Does not automatically connect to wireless network anymore

Mac Book does not automatically connect to know networks any longer.

Hi sashton,
When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
Avoid giving your wireless network a common name (SSID)
http://support.apple.com/kb/HT4450
If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Thanks,
Matt M.

Wireless network does not automatically reconnect after sleep

I have a Belkin wireless G+ mimo modem router network. When I wake the mac from sleep it does not automatically reconnect to my wireless network and i have to manually select the network from the airport icon in the menu bar and then it connects without having to reenter my secure password. How do i set the mac to auto connect to the network after sleep? There are about 6 other wireless networks in range which may be effecting this reconnection.

In may case the network was already at the top of the preferred networks list.
Based of of a hint over at MacOSXhints.com, here's how I fixed this problem:
1. In the Network references pane, delete the Airport connection that does not like to reconnect.
2. Click Apply and Quit the System Prefs app.
3. Put the computer to sleep.
4. Wake the computer.
5. Go back in to the Network pref pane and re-add the Airport connection. Do not try to connect to the network at this time.
6. Click Apply and Quit the System Prefs app.
7. Use the Airport menubar app to connect to your network.
8. Verify connectivity
9. Put the computer to sleep.
10. Wake the computer.
11. Verify connectivity
My machine now consistently reconnects when coming out of sleep or restarting.
God luck!

Ipad does not automatically roll between networks

Similar Messages

Maybe you are looking for