IPad error message with videos 560947818

Whenever I try to play a downloaded movie on my iPad2, error message 560947818 appears
I am also having problems watching watch BBC iPlayer videos.
This problem only arose in last few days.
Am not sure if related, but occurred after connecting via HDMI cable to TV.
Has anyone else had a similar problem? Can anyone help?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Similar Messages

I always get a black screen & error message with YouTube, white screen on Facebook videos.

I always get a black screen & error message with YouTube. White screen on Facebook videos. I am using Firefox 17.0.1.
There is no more content to provide.

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems caused by Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

I try connecting to I tunes i get an error message with the error message IxE000068 any ideas

my ipod touch will continually be in the spinning wheel like it is shutting down mode and occasionally go to the start up screen nothing else. i tried connecting to the itunes and got an error message with the code IxE8000068 and saying itunes could not be connected to this ipod

Did the error number really start with
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

I have a macbook 15 inch and philips LCD which I'm trying to connect my laptop to. I currently have a HDMI plugged in, but am getting an error message "no video input" on the LCD tv. Please help!

I have a macbook 15 inch (retina display) and philips LCD which I'm trying to connect my laptop to.
I currently have a HDMI cable plugged in, but am constantly getting an error message "no video input" on the LCD tv.
I have checked the philips LCD to be in the HDMI mode and googled many threads but have
not found a solution to solve my problem. Would appreciate any help given!

Hello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H.

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore - On my iPad the only thing I see is a connector cord to iTunes and nothing else.
What can I do ???

Same issue for me, recently I started having issues with apps no longer being able to access my Facebook account. But the iPad Facebook account settings will not accept my password, even though the Facebook app and Safari can access my account fine. The only significant events I recall that have occurred that may have triggered this have been that via my Facebook account I killed off a lot of so called authorised connections and I changed my user name, but still have the same email address and password.
I have tried just about every solution put forward on the net, short of a factory restore, back to new, on my iPad.
I have also; deleted my iCloud account, deleted the Facebook app and account, deleted Safari data.
One would think that after I have deleted my account from the iPad that it would ask for both username/email address and password, but it only asks for password, so the username is still stored somewhere that I am unable to delete.
I also see that no one seems to have been able to get an answer from Apple. So I'm guessing they have absolutely no idea themselves.
I am hesitant to put my username on Facebook back to what it was as Facebook only give you a few chances to change your username, then you are locked.
I have iOS 7.1.1 installed.
I did have a lot of respect for Apple and their devices as they just worked, but they are becoming tarnished by ignoring what seems to be a growing issue.

Vimeo video unable to connect. Error message says "video format or mime type is not supported.

Hi I am using a template with a full screen video landing page but i am unable to get Vimeo to video to connect. Error message says "video format or mime type is not supported".
I have uploaded successfully to Vimeo however when published to catalyst and previewed the error message "video format or mime type is not supported." is displayed.
Is this a format issue? I should point out I am using a template from Museworld as I am not a designer or graphic artist just another noob.@

Hi,
This seems to be a Firefox error:
Firefox error: video format or MME type not supported - Articulate Storyline Discussions - E-Learning Heroes
Kindly check if you are able to view the video on Vimeo.
Also, try using another browser.
Hope it helps,
Sonam

"Error Message: File video dimensions (width/height) too large"

Hello,
I believe someone else had a similar problem and posted to this forum, but here it goes...
I have a project in Premiere CS3 that uses MPG files. The files open just fine in CS3 at work. At home I have CS4, but those MPG files do not import. I've tried converting the files to a MOV file but I just get the same result:
"Error Message: File video dimensions (width/height) too large"
I'm using Premiere CS4 version 4.1.0 on a Mac. My work computer is a PC.
I've tried running the file through MPEG Streamclip a couple times with different settings, but so far no luck. I realy have no idea what I'm doing there or what setting could work, but I've got another conversion cranking away now. We'll see how that goes.
Thanks

A handheld 4K camera with exchangeable lenses with 1" sensors, standard with a 20-600 mm equivalent zoom range, with extender, with a simple battery that lasts at least 12 hours, that records on $ 25 SD 128 GB cards, available at every streetcorner and does 4:4:4 color space uncompressed I-frame with a weight of less than 4 Lbs and with a dynamic range over 60 dB, all under $ 1 K?
Take out the prices and you've fairly accurately described the forthcoming Scarlet.
It also describes somewhat well AVC-I cameras.
But overall, I would not argue with your description as a goal to be achieved in 5 years. In the interim there would have to be compromises, of course. But there are three things that should never be compromised in any video camera anywhere - the imaging devices should always be full resolution, the recording format should always record the full raster, and only using I-frame compression.
This was the norm for standard definition. Only with HD have camera makers mucked things up. It's time they got back to basics and made proper cameras.

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

Error message with hyperlink

Hi Champs,
I have requirement in which I need to display an error message in SRM Portal.The error message is maintained in the SAP SRM system and can be viewed through SE91.
We are using SRM 4.0 Version.
I need to display the below error message with a hyperlink to a particular site:
Profit Center of plant and CO do not match, CO belogs to plant XXXX (item link)"
Is it possible to have hyperlink with an error message.
Thanks
Regards,
Nishant

Hello
It is no possible.
But you may add hyperlink into documentation for message (SE91 -> Goto -> Documentation -> Long text).
In this case hyperlink will be available after double click on error icon in left bottom corner.
PS: and not duplicate posts.

Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

Moved thread to Android development.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

Displaying an error message with a link to the error field

By default, ADF validation usually displays an alert with an error message and a link to the error field.
I have some custom validations where I finally display the error message with this:
public static void MessageError(String messageText){
    //String messageText="No se han encontrado estos datos";
    FacesMessage fm = new FacesMessage(messageText);
     * set the type of the message.
     * Valid types: error, fatal,info,warning
    fm.setSeverity(FacesMessage.SEVERITY_ERROR);
    FacesContext context = FacesContext.getCurrentInstance();
    context.addMessage(null, fm);
My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
Is there any way to get this ?

Can't you include this in your message?
You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
Timo

HT4910 My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

Error Message with multiple line

Hi
How to display a error message with multiple line?
Example
     Goods movement not possible for material 101
     Goods movement not possible for material 102
     Goods movement not possible for material 103
is it possible is ABAP? If so please advice me.
Best Regards
Asheek

Hi Anoop,
You can use same thing like this
I suggest write ur message through this.
First set the obecj.
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
for local memory
FUNCTION 'APPL_LOG_WRITE_MESSAGES'
         EXPORTING
              OBJECT              = OBJECT
              SUBOBJECT           = SUBOBJECT
              UPDATE_OR_INSERT    = UPDATE_INSERT_FLAG
         TABLES
              MESSAGES            = MESSAGE_TABLE
         EXCEPTIONS
              OBJECT_NOT_FOUND    = 1
              SUBOBJECT_NOT_FOUND = 2
              OTHERS              = 3.
the call for physical memory
CALL FUNCTION 'APPL_LOG_WRITE_DB'
In this process you only need to provide the Itab with error messages.
Reg,
Arpit

HT4236 I get an error message with I try to plug into itunes; This iPhone cannot be used because the Apple Mobile Device service is not started.

I get an error message with I try to plug into itunes;
This iPhone cannot be used because the Apple Mobile Device service is not started.

http://support.apple.com/kb/TS1567

IPad error message with videos 560947818

Similar Messages

Maybe you are looking for