Ipad mini will not restore after ios update 7.1.2

Hi Community,
     I recieved a message last night about the update 7.1.2 for my ipad mini. I left my ipad on overnight while plugged in while it was updating. i woke up this morning seeing my ipad must be connected to itunes. I connect my ipad to itunes and it must be restored. Every time i try to restore and update the ipad from itunes i get the error code 3004. I have tried hard resetting the ipad, re-downloading the latest version of itunes, and disconnecting and reconnected the usb plug. 

Hello, Ronald. 
Thank you for visiting Apple Support Communities. 
Here are the steps that I would recommend going through when experiencing error 3004. 
Resolve network errors
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or say the "device isn't eligible for the requested build.". These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Resolve iOS update and restore errors
http://support.apple.com/kb/ts3694
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Cheers,
Jason H. 

Similar Messages

  • Ipad will not restore after ios5 update

    Help!  I downloaded ios 5.  Now during the install on my first gen ipad 3g64, it will not get past the updating firmware.  Gives error.  Have tried at least a dozen times.

    Restore from iTune Backup
    1. Settings>General>Reset>Erase all content and settings
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Select Network and input Password>Join
    9. Enable Location Service>Next
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Select Restore from iTune Backup
    12. You will see picture of USB cable pointing towards iPad
    13. Connect iPad to iTune (make sure iTune is on standby)
    14. Tap Continue (computer)
    15. Restore iPad from Backup (computer)
    16. See progress bar with estimated time (computer)
    17. See Restore in Progress on iPad
    18. See Apple logo
    19. See Apple and Progress Bar
    20. Slide to Unlock
    21. Copying Apps back to iPad (computer)
    22. You'll see Loading/Installing/Waiting below the Apps (iPad)
    23. Sync Music/Podcast/Movies to iPad (computer)
    24. Sync completed (computer)

  • Mac Mini will not boot after Security Update 2008-007

    Hello,
    A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
    Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

    Hi Arkku , and a warm welcome to the forums!
    I'd certainly give Sig's advice a try first.
    If that should fail...
    applesetupdone...
    This was Posted by: JoseAranda at September 9, 2006 3:48 AM
    "OK, restart your computer, hold down Command-s and type in the following:
    /sbin/fsck -fy Enter
    /sbin/mount -uaw Enter
    rm /var/db/.applesetupdone Enter
    # The rm command is the remove command which deletes the file.
    # Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
    reboot Enter
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    end of posted by: JoseAranda"
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

  • IPad Mini will not boot after battery drained after IOS8.0.2 Update

    I upgraded to IOS 8.0.2 having skipped 8.0.1 two days ago. I did not notice any unusual problems, but with hindsight a few apps did crash out on occasions, but not consistently.
    Yesterday night I let the battery completely drain and I plugged it in to recharge overnight.
    This morning I find that logo is still on screen and it doesn't look as if the iPad has recharged. I have tried re-booting a number of times, but it will not progress beyond the Apple Logo. I have tried connecting to iTunes on my Macbook Pro, but no device is recognised.
    Having left the iPad sitting next to me while still connected to a charger, I have noticed on a couple of occasions a flash of blue screen followed by black and then the Apple Logo appearing again.
    My iPad Mini Retina 128Gb appears very dead at the moment. Any suggestions on revival?
    Tony Self

    Try to put your iPad into DFU mode and do a full restore this way. To do so, follow the steps below:
    1. Open iTunes on your computer
    2. Connect your iPad via USB.
    3. Press and hold the Sleep/Wake and Home buttons for about 10 seconds.
    4. Release the Sleep/Week button but keep pressing the Home button until iTunes shows that it has detected and iPad in DFU mode.
    5. Try restoring your iPad.
    If this won't solve your problem, and you are not able to do a restore via iTunes at all, then take your iPad to an Apple Retail Store because then it is possibly a hardware failure. Here you can find the service options: https://getsupport.apple.com/ProductSelector.action

  • IPad will not restore after iOS7 update

    I just updated my iPad to ios7, did restart and restore and now I cannot get past the welcome screen.  It keeps asking me to restore from backup, which I have done repeatedly.  My computer shows my iPad as having everything restored, but the iPad does not.  HELP!!!!!

    Restore from iTune Backup
    1. Settings>General>Reset>Erase all content and settings
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Select Network and input Password>Join
    9. Enable Location Service>Next
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Select Restore from iTune Backup
    12. You will see picture of USB cable pointing towards iPad
    13. Connect iPad to iTune (make sure iTune is on standby)
    14. Tap Continue (computer)
    15. Restore iPad from Backup (computer)
    16. See progress bar with estimated time (computer)
    17. See Restore in Progress on iPad
    18. See Apple logo
    19. See Apple and Progress Bar
    20. Slide to Unlock
    21. Copying Apps back to iPad (computer)
    22. You'll see Loading/Installing/Waiting below the Apps (iPad)
    23. Sync Music/Podcast/Movies to iPad (computer)
    24. Sync completed (computer)

  • Mac Mini will not load after recent update.

    My late 2012 model Mac Mini just had a software update and upon rebooting, my login name did not populate.  I rebooted again and now I get the gray screen with spinner and progress bar.  Once the progress bar loads I have just the spinner for a minute or so before it cuts off completely.  I use a wireless MAC keyboard and it will not load into safe mode when I try holding down SHIFT upon reboot.  Any suggestions?

    Try Safe Mode with a wired KB
    Use a PC KB if necessary
    http://support.microsoft.com/kb/970299
    Boot to recovery
    OS X: About OS X Recovery
    and try repairing the startup disk
    Next reinstall the OS

  • Phone will not ring after ios update

    Since I recently updated my iPhone 5s to ios 8.0.2 i am having a problem where it will not ring when I get incoming calls. what can be done to fix this issue?

    Hi hobbs1977, 
    Welcome to the Apple Support Communities!
    I know it must be frustrating when you iPhone will not ring when you have an incoming call. The first thing I would suggest as far as troubleshooting would be to check the ring/vibrate switch on the side of your iPhone, just above the volume buttons, to make sure the ringer isn’t silenced. If the ringer is not silenced, continue to read over the information in the attached article to troubleshoot your iPhone sound. 
    iOS: Understanding sounds, ringtones, and alerts
    Have a great day, 
    Joe

  • MAC Mini does not restart after Yosemite update

    I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems.  I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
    Any help or ideas appreciated 
    Larry

    Okay, this is strange.  I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%.  I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
    Larry

  • IPad mini will not alert for skype and facetime calls. Everything is on. This started after one of the updates after ios 7.

    HHow many times do I have to write this?!?
    ipad mini will not alert for facetime or skype calls. Yes everything is on. No, mute is not on.  Fed up!

    Hello, pleaseacceptthisalias. 
    Thank you for visiting Apple Support Communities.
    I would first start with forcing all applications to close and power cycle the device.  Once this is done, have someone make a test call using these applications.  If the issue persists, see the steps in the second article.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Troubleshooting notifications
    Push notifications require an active Wi-Fi or cellular connection.
    Note: Notifications use Wi-Fi only when a cellular connection is unavailable. Firewalls and proxy servers may affect your ability to receive notifications. For more information, see Unable to use Apple Push Notification service (APNs).
    If you're not receiving notifications for a specific app, try these steps:
    Verify that the app supports notifications.
    After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
    Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
    iOS: Understanding notifications
    http://support.apple.com/kb/ht3576
    Cheers,
    Jason H. 

  • IPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!

    iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
    Help would be appreciated.

    PhotogYogi wrote:
    I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
    By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
    Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

  • Ipad mini will not boot up after charging

    ipad mini will not boot up after charging

    Hi luckysue,
    If your iPod mini isn't booting up or responding after charging, you may find the troubleshooting steps outlined in the following articles helpful:
    Reset your iPod - Apple Support
    iPod only shows an Apple logo and doesn't start up - Apple Support
    Regards,
    - Brenden

  • My ipad mini will not sync with itunes properly since ios8.02. How do I revert back to ios 8.0?

    My ipad mini will not sync with itunes properly since ios8.02. How do I revert back to ios 8.0?

    Hi SBonner,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    - Judy

  • My Ipad min will not power up or start after being on the charger this morning.  Was working just need to be charged no nothing.

    My Ipad min was working fine this morning when I noticed it need to be charged along with my Iphone.  Put them both on chargers.  Now Ipad min will not power or come out of sleep mode.  tried pushing home botton and the sleep/awake button on the to right to no avail.  Any Ideas what to try next?
    Thanks
    Tom

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove all apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red (-) to delete all apps from this list.
    - Press the home button twice when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • My ipad mini will not turn on even after a reset.  Any one else experience this and how do you fix it?

    Ipad mini will not turn on even after a reset?  Any suggestions!   While playing angry birds ipad mini froze, hit home button Angry birds shut off, slide bar screen came up, slide bar, went to angry birds again started playing and froze, pushed home button screen went blank and now will not turn on.  Need help!

    Try holding your on/off and home buttons at the same time until you see the Apple logo. 

  • Ipad mini will not charge or turn on

    ipad mini will not charge or turn on, I have tried rebooting and also charging from wall. Apple icon doesn't appear even if I leave plugged in for an hour

    Well my problem is now solved, both devices are bricked, Apple Store replaced both devices today, After talking with my daughter had the iPad mini was charging and it updated iOS8.1.3 and then bricked, tried all the things you suggested with both devices.  Yes, I agree about not letting my devices die, this was the first time my phone had died in 5 months but I firmly believe iOS 8.1.3 was the cause of both devices demise.  Apple checked both devices and promptly replaced both in about 30 minutes.  I hope this is not the way Apple is planning on continuing with software updates.  I have 10 apple devices and have been a strong supporter of their company, but these kind of half done updates are the reason I removed all Microsoft products from our household 7 years ago!

Maybe you are looking for

  • How to achieve dynamic page break in Smart form

    Hi           1.How to achieve dynamic page breaks in Smart forms.            2.What are the various table types in Smart forms. Regards

  • Two way Asynchronous business process for Webservice to JDBC scenario

    Hi Experts, For the webservice to JDBC scenario, I have to use two way Asynchronous business process. Is it possible? Scenario : Webservice to JDBC -> Async Call JDBC to Webservice -> Async Call I have already done with two way Synchronous. Here I wo

  • Report output displaying displaying as *

    Hi Experts, I searhed all the thread could'nt  get a solution ,While displaying the data in BEX, it is displaying as '*' for keyfigures. Though the data is available. I transported this quey from quality to production every thing fine quality system

  • Can't apply fade to slug?

    I put a slug in to serve as a background for text (the shot is bad, but the audio is priceless) I would like the surrounding shots to fade into the black slug, but FCE HD won't let me. I tryied a overwrite with transistion and dragging a cross-fade i

  • Help please with SQL?

    I get the error of "ORA-1652: unable to extend temp segment by 64 in tablespace TEMP" sometimes though it's over 4GB. So I need the SQL statements to get: 1. Temporary tablespace usage percent? 2. what size does each active user use in Temporary tabl