IPad not detected by computer. Not charging. I'm pretty sure its the dock connection inside the actual iPad, and there is nothing that apple will do because it messed up literally messed up 3 days after my warranty was up. Anything I can do?
My iPad has been messed up for quite a while now. It won't charge correctly. It's not detected by my computer. I'm pretty sure its the dock connection. Apple won't do anything because my warranty was up literally 3 days before I noticed the problem. Should I just send to to someone who works on iPads and hope for the best? Is there anything else I can do? It woudn't bug me if I already had iOS 5 installed but alas, I do not. I just got an iPhone and want to enjoy the benefits of iCloud. Also I can't update Pages because it requires iOS 5 and that's super annoying.
Further to my last, I am just asking for that check as a double precaution.
You stated originally that your IPad "won't charge correctly". Can you be more explicit?
Is there any charge in it at all? What does the indicator say? If the battery is completely drained then it might take 20 minutes or more to indicate that it is charging. At the end of the day, you could have a virtually drained battery which is one problem and also the unfortunate experience of an iPad not being detected by iTunes for a completely different reason altogether. (Hope you get this post before replying to my last.)
Similar Messages
-
I am cannot access the iTunes store via iTunes on my PC and also can not update to 10.6.3. It keeps telling me that my connection has times out and/or check my settings. There is nothing wrong with my setting. I am also having trouble with the app store on my iPhone 4s and can not update apps.
I have signed out of itunes and now cannot sign in again.I feel you pain i'm haveing the same problems here.
iTunes could not connect to the iTunes Store. The
network connection timed out.
Make sure your network settings are correct and your network
connection is active, then try again.
does anyone plz have some insight for us. -
My screen is frozen with a picure of a plug trying to connect to an iTunes icon. I can't reboot my phone or sign on to iTunes. When I callmy cell phone number the call goes straight to voice mail! What happened? How do I get rid of the screen on my iPhone? Help please.
Thanks for any advice.There are multiple reasons why the update failed, unless you can provide an error message/code that came up then nodbody will know.
Now your iPhone is in recovery mode and will now need to be connected to a computer with iTunes and restored to factory settings. This will install the update at the same time.
If you have a back up of the iPhone before the issue occurred then after the restore to fqactory settings you can restore the back up to the iPhone. If there was no back up then I'm sorry your data is gone. -
Is there any chance that Apple will bring back spaces as it was in SL?
Why did they discontinue it?
Spaces feature is been replaced by mission control: http://support.apple.com/kb/ht4689
Doesn't look like spaces will be back... -
I plugged my IPAD 2 into my computer to charge and a window popped up saying (through itunes) i could sync from my ipad 1 to get music and other photos ect. I pressed yes and then i went onto my ipad 2 after it was done and ALL of my VERY IMPORTANT notes for my school reading were GONE. HELP!? how do i recover my notes?!
Did you create these notes in the iPad notes App ... I assume?
This support article will explain how you can restore from a backup - which is what you have to do in order to have any chance of recovering your note.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
But you have to remember, that you will lose any of the notes that you have taken since the date of the last backup. If you synced your iPad last week, then you will lose a whole week of current notes - or whatever notes you have created since your last backup. When you restore from a backup - you restore everything in that backup onto the iPad - that was on the iPad on the time and date of the backup.
If you backup every day, then all of your notes should be recoverable from the backup - except for any notes that you took since you last backed up. There is no foolproof way to recover everything once you start taking more notes or creating new documents or whatever that you do in an app unless you are syncing those notes with iCloud and backing up all of the time or unless the app is set to sync with iCloud as you work on the files - like in Pages, Numbers or Keynote - Apple's iWorks apps.
If you decide to restore from an iTunes backup you should turn off at sync before you try restoring because iTunes will want to backup your iPad right away when you plug it in and you will lose your old or last backup. -
Iphone 4 is not detected by computer and itunes but it is charging
Iphone 4 (IOS 7) is not detected by computer and itunes.
I am the 2nd owner of this iPhone 4. I did all the troubleshooting said in http://support.apple.com/kb/TS1538 but nothing resolved it.
Troubleshooting I did:
1. Used other iphone / ipod devices, it worked but not my iphone 4.
2. Used different Windows OS and different computer, Win7 & Win8, still not detected.
3. Used different USB cables, still not detected. But my current USB cable is working with other iPhone/iPod devices.
3. Uninstall / Install iTunes, still not detected.
4. There is no "X" in the device Manager, and also, portable devices is not showing upon plugging in the device.
5. Made sure that the Apple Mobile Service is running.
6. I only have iPhone devices, so I don't have any 3rd party Software conflicts.
Please help me. Thanks!Hi anndhrew,
Based on the information you have provided, it appears your <product name> needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
http://www.apple.com/support/iphone/repair/
Thanks for using Apple Support Communities.
Best,
Brett L -
Shuffle not detected by computer
My Ipod Shuffle is not recognized by Windows or ITunes. I updated ITunes and it didn't help.
Any suggestions?I think the trouble-shooting you describe has ruled out a bad USB docking cable, and a problem on the USB port. And since it previously worked with this computer, it's not some incompatibility with software or hardware. Even if there was a software (OS or iTunes) related problem, the shuffle should still charge when connected.
So, if it's not software, the docking cable, or the USB port, the cause is probably a problem on the shuffle (such as the logic board or battery). Since it is less than one-year from purchase date, you should have it checked under warranty. If you have an Apple Store nearby, you can make a reservation at the Genius Bar on the store's web page
https://www.apple.com/retail/
and take it there. Otherwise, you can contact Apple's tech support using the Contact Us link at the bottom right corner of this web page. -
Ipod not detected by computer or itunes
Hi all,
I have two older ipod classics (from before they were called classic!), the are suddenly no longer findable on any of my computers. One is a 30gig, and easily 5 years old. The other is an 80 gig that is probably 4 years. Both play thru stereo and car radio with no problems, and can take a charge thru a USB cord. My 180 gig (about 2 years old), is still recognized by computers, as are an original! shuffle and and elderly 4 gig nano. The primary computer is an iMac, OS X 10.6.4 (reloading snow leopard, but thats another story), iTunes 10.4. However, I've also tried to connect these to a Macbook OS 10.6.7 and a Macbook Pro 10.6.7, both less than a year old, as well as a 4 year old macbook running 10.5.8 and iTunes 10.1.1. I've tried several usb cords, and no joy there. These computers all see the 180 gig, as well as the shuffle and nano, but not the other two. Any suggestions?
Thanks,
ZephI think the trouble-shooting you describe has ruled out a bad USB docking cable, and a problem on the USB port. And since it previously worked with this computer, it's not some incompatibility with software or hardware. Even if there was a software (OS or iTunes) related problem, the shuffle should still charge when connected.
So, if it's not software, the docking cable, or the USB port, the cause is probably a problem on the shuffle (such as the logic board or battery). Since it is less than one-year from purchase date, you should have it checked under warranty. If you have an Apple Store nearby, you can make a reservation at the Genius Bar on the store's web page
https://www.apple.com/retail/
and take it there. Otherwise, you can contact Apple's tech support using the Contact Us link at the bottom right corner of this web page. -
Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????
It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this. -
i am facing a problem in my IPod . it is not detected by computer i tried every possible thing i changed cable i installed new itunes still its not coming up in itunes. can you please help me regarding this problem.
This is for Windows: http://support.apple.com/kb/TS1538
-
ipad is connected to the computer however doesn't show up in the menu, I'm trying to restore it but am concerned that it will restore the iphone and not the ipad. any suggestions?
Hi vanover7,
It sounds as if when you connect your iPad to your computer it does not show up in iTunes, is that correct?
Please use the steps in this article to troubleshoot the issue -
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
i have an iphone 3gs the old battery was useless so i replaced it with a new battery but it wont hold a charge now it used to charge to old battery but would just turned off if disconnected to its not the dock connecter any advice
Advice:
1. Learn to use punctuation and sentence structure - your post makes little sense.
2. I'm getting the idea you now want to use your old "useless" battery. Why, if it's useless? -
5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?
I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE! -
i got an iphone 5c last saturday. i noticed that after merely 5minutes of using facebook, my phone got warmer than the usual. i know that phones will get warm if being used but getting a warm phone after just 5minutes of surfing with 3G seems not normal. compared it with iphone 5 and 5s and they are not getting warm like that. is it a software or hadware issue?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
Maybe you are looking for
-
Best way to architect a solution for XML.
Hi All, I am attempting to ascertain the best method to deal with this scenario: A third party piece of software produces an xml which contains a product list. I want to take this xml strip out some unrequired strings and then compare the differences
-
Problem with SWF export and audio looping
When I export from Keynote into SWF, I get an odd audio looping problem when playing the SWF files. Here's the workflow: Create Keynote presentation (includes transitions typically, but also happens with presentations that don't). Record audio using
-
Can you capture while shooting with canon XL2 in fcp on Macbook pro
Is there a way to capture or record directly onto macbook pro hd thru final cut pro, or thru log and capture window while shooting with Canon XL2. If yes, how, please! Thanks, Zia
-
Wrt310n gigabit ethernet 20% network utilization?
hi there, I am transfering a large multi-gigabyte file over the gigabit ethernet of the router, two computers, which both register as 1 gbps in the network window of the Task Manager and I see the network utilization is only about 20%. Should this
-
The following app manifest is produced when you run 'Produce App for Store' and gives an error message for Visual Elements. The previous version uses 2010 manifest and works fine. Please advise so that I can produce apps for the store using visual st