Ipad won't start unless plugged into the wall or earphone jack in??

My ipad3 running iOS 7.1 won't start up unless plugged into the wall or earphone jack in.  Battery fully charged and works fine once I get it to start.  I have tried powering it off and rebooting but to no avail.  Any help would be greatly appreciated..

Hi there Learg,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. 

Similar Messages

  • HT4972 My ipods screen is black and wont turn on unless plugged into the wall

    My ipods screen is black and wont turn on unless plugged into the wall not the computer but when i plug it into the computer and put it in DFU mode it wont restore there is an error 3194 and error 1602 and nothing i do helps

    Here's what I found about error 1602:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert,update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194 is also seen when somebody is trying to restore jailbroken devices.

  • My iphone will not come on unless plugged into the wall charger

    my iphone 4 went completely dead since then i tried chargeing it with a charger bought from sams wholesale which was an aftermarket charger which did not work i then plugged it into the factory wall charger it comes on but says searching for signle i talked to apple support ny telephone and they said i need to restore my phone but unless plugged into the wall the phone will not come on please advise on this

    rustyfromhouma wrote:
    i do not have anything on my phone stored
    If you mean you didn't backup or sync your phone, everything on it will be lost when you get a replacement unless the techs are able to do this.  Apps can be re-downloaded.

  • My iphone wont fully turn off unless plugged into the wall charger! help! it is causing battery drains

    my iphone has been experiencing poor battery life. i have restored it twice now, and nothing seems to be helping. i am wondering if the fact taht the phone wont shut down has something to do with this problem. i cant get it to fully turn off unless it is plugged into the wall! help! i have tried restarting it holding down the hold and home button nothing works.

    Restore as new, does the problem continue?  If so, take it to Apple for evaluation.

  • IPad 2 won't charge when plugged into the wall or computer. Please Help!

    Hi, I'm really hoping someone can help me??
    My other half took my iPad 2 to Ireland (and took the official Apple wall charger). One night when he was charging the iPad it came up with the message 'this accessory is not compatible with this device'  but he left it as he knew it was the correct charger and had the lightning bolt over the battery meter. Plus we have other Apple devices (iPhones, iPod Touch and iPod video and nano) that have displayed this message before and been okay.
    Since he has been back, whenever the iPad is plugged into charge, either via wall mains or via USB on my laptop it won't charge. It doesn't even recognise that it is plugged in (no lightning bolt over the battery meter, no noise or vibration to show that it has been plugged in).
    I've spoke to Apple Support today and found that it is 36 days out of warranty and will cost me over £210 to repair . The operator did suggest that I back up the iPad and then restore it to its factory settings but when I plug it in to my laptop with iTunes on it does not recognise it is there! So how can I do this?
    Please can someone help? I've tried googling all sorts of resolutions but none work, you guys are my last hope as I cannot afford to repair it!
    Any help is greatly appreciated.
    Leanne

    So, today I was able to connect my ipad to the computer and completely restore to factory settings, first I backed it up to icloud, then through itunes I was able to erase my ipad2 completely then disconnect from the computer and through icloud, restore my system. It worked... the first time I restored my ipad I didn't do it through itunes so the system didn't get erased, so you have to go through itunes.
    back up your ipad on icloud first...
    connect ipad.. do not sync.
    click on ipad icon in your itunes program.
    go to summary
    version
    restore
    once restored disconnect and get your back up from icloud,.
    worked for me!!

  • My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds- Can anybody help? Has IOS7.0 but the most up-to-date version

    My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version

    It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time

  • Fascinate won't start unless plugged in

    My Samsung Fascinate won't start unless plugged in. Even with a full battery. It shows a dead battery and won't start.

    How old is the phone/battery?  I would order a new, OEM battery from an online retailer (usually inexpensive, fast delivery) like cellularaccessories.com or batteries4less.com and see if that fixes the issue.  Batteries do wear out....

  • Phone won't start unless plugged in.  No phone or internet service

    On my 4S the phone won't start unless plugged in.  Once plugged in it shows 100% charged.  If I unplug it it will go dark and no button works. 
    Once plugged in and the phone is on it keeps searching.  I receive no phone or internet service.  After awhile it will dim and then go dark.  Have to reset to get it back on.  Each time, it goes to 4PM and 12/31.  Can go through apps, but no sound (music for example). 
    Anyone have these types of problems before. 

    Sounds like its broken. Take it to an Apple store for replacement, as its still in warranty. Make an appointment first. http://www.apple.com/retail

  • TS3274 iPad won't charge while plugged into computer

    My iPad won't charge while plugged into computer

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

  • My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

    My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use the wall-mount charger that came with the iPad and charge overnight.  Do NOT use an iPod/iPhone charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know.  If the above test does, in fact, indicate a problem, read this.
    Also, according to Apple:
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • Are there any problems using the Ipad while is is plugged into the wall and charging?

    Are there any contraindications using the Ipad while it is plugged into the wall and charging???

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
     Cheers, Tom

  • HT201263 I just bought this iphone not even a month ago. It will not work unless it is plugged into the wall. It will not turn on plugged into a computer. Am I SOL? I do not have insurance.

    I just bought this iphone not even a month ago. It will not work unless it is plugged into the wall. It will not turn on plugged into a computer. Am I SOL? I do not have insurance.

    You do not have insurance.
    You do have a one year warranty on workmanship and materials.
    Call Apple and set up an appointment to have them look at it.
    They should fix it ot replace it for you.
    Allan

  • HT4946 My Ipad is plugged into the wall.  It is locked and telling me to backup to icloud.  The ipad will NOT unlock, even after I push ok.  Help!

    My ipad is plugged into the wall.  It is locked and telling me to backup to icloud.  I can not unlock it even after I press ok.  Do you have any advice?

    A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo reappears, release both buttons and await restart.

  • MBP is "Not Charging" but is plugged into the wall..

    Hello
    I have a 2.2ghz MBP purchased February 2007. I just noticed recently a couple things... First the computer would say "Not charging" even though it is plugged into the wall, the LED on the charger would be green. The screen would also lit up more as if it is plugged in and if I remove the connector, it dims as usual. It would still say that "Not Charging." Another thing is the LED does not lit up sometimes in charging, stays colorless. The charger is great condition, no damages to it. The battery on the computer holds a strong charge in the past. What could be the problem? Hardware or software?
    Thanks for viewing! Appreciate any thoughts!
    Mark

    You could always reset the SMC in case that might be a factor. The green light indicates that the power adaptor is not charging--the amber light indicates that the power adaptor is charging. If the battery is over 95% charged, it won't charge unless the charge drops lower. If you run off of the battery for a while, will the power adaptor be amber when you plug it back in and it starts charging?
    As for the LED not lighting up at all when the battery is charging, I have no explanation for that. Possibly the LED itself is burned out or not working properly for some reason. Does the battery still seem to charge normally after it has been discharged a bit?

Maybe you are looking for

  • OC4J 9.0.3 (date 07/31) problem with the MDB-demo and Oracle9i-databases (v9.*)

    Trying to get the supplied mdb-demo to work in the J2EE 1.3 certified version of OC4J 9.0.3 (from 07/31). It works fine with the OJMS-provider in a Oracle 8i v8.1.7 database but not in a Oracle9i database. I have now tried three possible versions of

  • Line item...Card H

    hi guys, while creating infocube dimensions...I found some things I didnot understand... 1.Line Item Dim 2.Card H Dim what are they and where do we use them in real time.... thanks and rgds Surekha

  • Error Disabling the Clock Rate on Interface

    When i try to disable the clock rate on a Serial interface of a 3640 Router the router returns the following error: Router(Config-if)#no clock rate 56000 FECPM PM doesn't support clock rate 0 HOw can i disable the clock rate

  • Auto Analizer stops

    Elements Organizer 10 Auto analizer stops working. I see messages: CAHeadless Debug Event or CAHeadless has encountered an error [..\..\APT\APTDescriptorWorkItem.Cpp-71]

  • Best way to upgrade to Lion?

    I've spent the last 2 hours upgrading from Tiger to Snow Leopard 10.6.8 on my Macbook. What's the best way to upload Lion from here? Is the OS X Lion USB Thumb Drive better than a download? I think the latter one is $69. Not sure of the download pric