IPad3 lost sound for all apps.

My ipad3 sound works with headphone but not speaker
Any more. Tried many ways but still not working. Reset ,restart ...
Need to found out what to do.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPad. Nothing will be lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPad.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

Similar Messages

  • I lost the sound for all apps. Music plays fine but apps do not have sound?

    How do I recover the sound in the apps, music plays fine on the iPad, but apps now have no sound.

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • My ipad1 lost sound for all games but works fine for music, movies, etc. Thoughts?

    any suggestions?

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • After download an application from the app store on my iPad i lost all sound for all my application, how do i sought this out?

    i lost sound for all my application on my ipad 3, how do i resolve this problem

    Is it all apps or do Music and Videos apps still have sound ? If they do then have you got notifications muted ? Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Stereo speakers mod for ALL apps and sounds

    Hi Sony Community,
    I want ask you if there is a mod without root to use the speakers of my Xperia Z2 on stereo for ALL apps, calls and sounds (system and not system).
    I found very bad that Sony hasn't optimize Android 5 with this feature because the speakers of Xperia Z2 are very beautiful and functional, better than Z3, but without stereo output are very limited and reduce the potential of this smartphone!
    The stereo front speakers of Xperia are one of the GREAT and BEST design features against ALL Samsung and Apple devices, so I don't understand why Sony use they on stereo to give us a powerful and especially COMPLETE sound output
    I hope in a future implemention of this setting into next firmware update, but now I will very haapy if there is a sostitutive mod to force to use speakers o stereo for ALL.
    Every answers are welcome to me!
    Cheers
    Solved!
    Go to Solution.

    No problem.. It's as safe as any modification of software I guess. I have never had any issues, but yes I'm sure just rooting the device will not lose your drm keys. You only lose drm keys when unlocking the bootloader which I do not feel comfortable doing.
    There's a full tutorial on XDA on how to do this. To sum it up, you pretty much have to downgrade in order to root and have custom recovery, then flash a pre-rooted stock rom. This will give you 100% stock experience, but with root added. Then you can choose which mods, etc you like to flash like the one mentioned above.
    It doesn't require too much knowledge, and isn't too complicated, but I'd still recommend reading up on it a lot before doing it, just in case anything happens. I always make sure I read instructions in full at least 3 or 4 times to feel comfortable.

  • After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

    After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • IOS keyboard in landscape mode for all apps

    Can apple make the iOS 6 keyboard have the option to use landscape mode for all apps?
    -Thanks!

    No, there is not.
    You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

  • Hi. For some reason my iPhones sound for all ring tone, lock, music loudspeaker has become very foamy and can hardly hear it. Both speakers are still working however just at low sound. In settings volume is turned up and bottons on the side are fully up.?

    Hi. For some reason my iPhones sound for all ring tone, lock, music loudspeaker has become very foamy and can hardly hear it. Both speakers are still working however just at low sound. In settings volume is turned up and bottons on the side are fully up.?

    maybe there are dirt, sand and lint in the speaker output grill ?

  • Anyone get FCS 2 upgrade box ? Hardcopy manuals included for all apps?

    Subject says it all... anyone have the $499 upgrade box yet? I am hoping for manuals for all apps... ( well except DVD Studio Pro 4 - it has not changed).
    thanks
    Still waiting for it to arrive in my local Apple store...

    I received all the manuals with my FCS1 upgrade box.
    They weren't included with the CROSSGRADE, but they were with the FCS1 upgrade.
    Haven't bought the FCS2 upgrade yet, so I can't speak to that, but they were in the FCS1 upgrade.

  • Since 8.0 update on my ipad, I can't find autocomplete settings, which used to work for all apps. So much for new and improved.

    Since 8.0 update on my ipad, I can't find autocomplete settings, which used to work for all apps. So much for new and improved.

    Settings > General > Keyboard

  • After Firefox updated itself to 3.6.12 I lost sound regarding all facebook applications

    after Firefox updated itself to 3.6.12 I lost sound regarding all facebook applications and videos. I have installed the latest flash and that doesn't solve the problem

    After Firefox updated to 3.6.12, my homepage stated that I did not have the Flash Player installed. The latest player was installed, but I uninstalled and attempted to re-install. The installation process worked, but the Adobe Flash banner on their page does not Flash like when a proper install occurs. The Adobe DLM add on will not allow me to change options on Firefox Addon page. Now Flash content on homepage will not play, and I am forced to use IE to view content.

  • Set sounds/volume default for all apps

    How do you set volume default so that it applies to all apps?
    When I go to YouTube I have to always adjust the volume.
    Thanks in advance.

    cafox513
    You will need to make a custom template with your own settings.
    The default text style is Body so set that the way you like it in the template.
    If you need help with templates and styles look here:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=2&sid=2abc89bd5c5512 60fd5ce34a4e6ad05b&mforum=iworktipsntrick
    You can set your custom template to open by default in your preferences.
    Peter

  • TS3274 I lost sound to all my games what do I do?

    I Lost sound to al my games..how o I get it back

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Probook 4510s,I have lost sound for no apparent reason.

    I have lost sound on my ProBook 4510s running Windows 7 pro. for no apparent reason.All checks say sound card is working correctly.I have downloaded latest drivers and installed them and tried all possible solutions I have searched,all to no avail.Any help please

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Speakable Items for all Apps?

    We've installed two iMac G5's on walls in a new waiting room/meeting room. The wireless keyboards and mouse are put away so that they aren't stolen. I've activated Speakable Items, and a few commands are working great. Is it possible to find speakable items for all/most applications, or do you have to make something speakable, app by app, command by command9 desired apps and commands only of course).
    Thx,

    Hi Brian,
    Thank you for contributing to the Apple Support Communities.
    It sounds like you're having a frustrating experience with Spaces in Yosemite. There are a few options that may help with this behavior.
    First, make sure your displays are set up as separate Spaces in the Mission Control pane of System Preferences:
    Displays have separate Spaces
    If you use the Spaces feature and have multiple displays, you can set up separate spaces for each display.
    From:
    OS X Yosemite: Mission Control preferences
    Then, if you want to move an application window from one space to another, try one of these options:
    Assign apps to spaces
    If you assign an app to a particular space, it opens in that space by default.
    Press and hold an app’s icon in the Dock. You may have to first open the app from Launchpad to see its icon in the Dock.
    From the shortcut menu that appears, do one of the following:
    Have the app open in the current space: Choose Options > This Desktop.
    The app appears only in that space. However, if you open the app in full screen, it appears in its own space.
    Have the app open in the current space on a specific display: Choose Options > Desktop on Display [number].
    Have the app open in every space: Choose Options > All Desktops.
    The app appears in every space.
    Have the app open in whichever space you’re using at the time: Choose Options > None.
    In Mission Control preferences, you can also specify that, when you switch to an app, your desktop should switch to a space with open windows for that app. To open Mission Control preferences, choose Apple menu > System Preferences, then click Mission Control.
    From:
    OS X Yosemite: Work in multiple spaces
    Best Regards,
    Jeremy

Maybe you are looking for

  • How can i delete one of my 5 computers from itunes? i need to rigistre a new computer...

    How can i delete one of my 5 computers from itunes? i need to rigistre a new computer...

  • The finder bounces and will not close or relaunch.

    When I power up, the icons in the bar at the bottom appear and the Finder icon starts to bounce. (No other icons appear on screen, just the ones in the bar at the bottom) Theer is a message box on the screen asking if I want to relaunch the finder, b

  • Unattend error

    The error: Could the answer file for unattended installation does not parse or process for phase [specialize]. A component or setting in the answer file does not exist. My OOBE unattend <?xml version="1.0" encoding="utf-8"?> <unattend xmlns="urn:sche

  • How to add buttons to a standart program

    Hi experts, It is easy to add a button in a call screen. But i want to add a button in a standart program which doesnt call a screen. For example an alv report. But i want the button near the exit, back buttons. not in the alv. I searched standart pr

  • Query Builder re-entrant ?

    Hi, the new Query Builder looks good. But is there a way to reopen a query in Query Builder? I couldn't find. Best Regards Rainer