Iphone 3G and wifi problems.  I've been reading the string about this from last year.  I have an iphone 3G with the latest ios 4.2.1 software.  Every time I connect to my home wifi - Belkin N  - it comes up after a few minutes with "Incorrect Password".

I re-enter the password correctly but it keeps happening.  Any suggestions?

I have a belkin n surf as well and i have got this and other problems. my iphone 3g and 4 often keep on loosing connectivity. especially if the bluetooth is one (either connected or not). it often fails to find my wifi network after waking up from sleep.
the problem i think is most certainly with belkin n. its one of the worst routers out there. unfortunately i didn't read the reviews before buying it. i have other problems with it to like connecting it to a dc++ hub. the setting up for port forwarding is a pain and it tends to connect to the internet on its own even though there are no settings to disable automatic connection.
i was later told by many people online and also read it in the reviews that its one of the very bad router out there along with other belkin routers. belkin has even arranged a replacement for me as its under warranty but i'm avoidng travelling to the other end of the city cause i know all models have the same problem. the worst of them all is a mere 3mbps transfer speed form one computer to another over wifi file sharing even if they both are connected via 802.11n and are placed withing full signal coverage range, with no firewall or security on either on the machines or router. tried it over several macbooks and windows pcs.
i'm getting lynksys for good.

Similar Messages

  • HT4972 i have an iphone 4 with ios 5.1.1 and i want to upgrade it to the latest ios 6 and not 7 because its too heavy for iphone 4 how can i do it

    i have an iphone 4 with ios 5.1.1 and i want to upgrade it to the latest ios 6 and not 7 because its too heavy for iphone 4 how can i do it?

    You cannot. When you upgrade, you will get the latest version of iOS 7.

  • I have an ipad1 and would like to update it to the latest iOS version. Can it be done?

    I have an ipad1 and would like to update it to the latest iOS version. Can it be done?

    Rodelo wrote:
    Netflix is getting a little funky.. Not working properly...
    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.

  • HT4972 I have iPad running iOS 5.1.1 and when i try to update to the latest iOS with iTunes I get "iOS 5.1.1 Your software is up to date"

    I have iPad running iOS 5.1.1 and when I try to update to the latest iOS with iTunes I get "iOS 5.1.1 Your software is up to date"
    It looks like some Apps I was using are no longer working properly under iOS 5.1.1

    Sorry, the original iPad can only be updated to IOS 5.1.1

  • HT4623 I am unable to download the latest iOS 6.0.1 software to my iphone because there is not enough available space.  I try to sync my phone to itunes and says it doesn't recognize the device and to reset the iphone using Settings on the iphone.  Help?

    Here is my problem:
    I'm unable to download the latest software iOS 6.0.1 to my iphone 4 because there is not enough available space.  I tried to sync my iphone to itunes and it says, "itunes cannot read the contents of this iPhone.  Go to the Summary tab in iPhone preferences and click Restore to restore this iPhone to factory settings." 
    I backed up my data to icloud to ensure everything is backed up.  Is there a way to verify if data was really backed up in icloud?
    What else can I do in order to free up enough space to download the newest version iOS 6.0.1?  Current version on the iphone is 5.1.1 and there is only 1.6 GB of space remaining.  I need 2.5 to download the software.

    If you really are running OS 10.4.6 you have a long way to go!
    So, assuming you are not, what version of OS X do you have?

  • TS1398 I updated my iPhone 4S to iOS 6. Now every time I connect to my home network I have to input the routers passcode why is this happening?

    Every time since I upgraded both my iPhone 4S and my iPod touch when I go to connect to my wi if home network. I am asked to input the network passcode. This never happened before I upgraded. ( this is a known network). Cn anyone help?

    I noticed that my camera app crashes when panorama mode is engaged - but only if the sound is switched off.

  • TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit.  Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

    I am connecting my iPhone 5 to my Windows computer via USB.  This should open iTunes and start the sync process.  Instead of iTunes opening, I get the iTunes service agreement to which I must agree.  Then iTunes opens and begins to back up my phone.  It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected.  Hence the computer and the phone are not sharing information.  When I select the functions I want to sync, I must either replace or merge.  If I replace, I lose the information I recently put into my phone.  If I choose to merge, then I have duplicates of everything.
    How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
    I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
    Thanks for any help!
    Christine

    After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
    java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
    I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
    I've found that this fails with the error;
    INFO: This tool works only on Windows Platform. Exiting the program
    Which is strange considering this is Windows Server 2008 R2 64-bit
    DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

  • TS1398 I am using the wifi network at home but every time I connect I have to put my password to the network. Is there a way to identify this wifi network on my iPad and once it detects it joins directly without having to put my password?????

    I am using the wifi network at home but every time I connect I have to my wifi password. Is there a way to have my wifi network per-identified on my iPad and once it's detected the iPad connects to it without having to put my password again???

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • I updated my iphone 4s to the latest ios ( 6.1.3 ) and afte the update i found the wifi is grayed .. any help is really appreciated

    i updated my iphone 4s to the latest ios ( 6.1.3 ) and afte the update i found the wifi is grayed .. any help is really appreciated

    This is most often a severe hardware fault of the WiFi Chip. But steps to try are, Settings App > General > Reset > Reset Network Settings. See if fixed. If not, Restore iPhone with iTunes on your computer. See if fixed. If not, and if there is Warranty or AppleCare make Genius reservation or set up service and take or send to Apple for resolution.

  • The wifi on my iphone 4s is not working, i have gone to the settings and tried to swicth it on but it shows the gray slide and refuse to turn on, what should i do about this

    product name - iPhone 4s
    memory - 64 GB
    storage capacity - 56.6 GB
    version nos - 8.1.1(12B435)
    the WiFi on my iPhone 4s is not working, i have gone to the settings and tried to switch it on but it shows the gray slide and refuse to turn on, what should i do about this.

    iOS: Wi-Fi settings grayed out or dim - Apple Support

  • I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. What should i do?

    I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. I have tried enable and disable restriction, connecting my phone to my laptop and sync from my computer and none of them is working. What should i do?

    Often when this type of thing occurs with missing default apps it is due to a situation where you are unable to 'see' the apps. If you will go to your front display of your device go to settings>General>Reset>Reset Home Screen layout.
    This reset allows for your apps that have for whatever reason been hidden in such an area as you arn't able to find them now to be returned to the area as which they were when you first had the device.
    As far as the missing Apps that were purchased through the Apps Store if you will go to settings>itunes and Apps store and click where it reads about automatcally downloading apps clicking on the toggle switch AND clicking on the toggle switch which allows for cellular data to be enabled this then will effectively automatically download all apps to your device that was purchased from the App Store.
    Good luck friend.

  • IPad 2 loses wifi connection every time I connect to Apple TV

    I'm a school teacher and have been using my iPad 2 for the past year on my school's wifi to mirror lessons via Apple TV.  I never had any issues, until recently, whenever I mirror my iPad on Apple TV, after a few minutes, my iPad will lose connection with the wireless.  The Apple TV will still have wifi connectivity, however.
    I used a coworkers iPad 3 and did not have the problem using hers.
    If it helps, my iOS is fully up to date, as is the Apple TV.
    Thanks in advance!

    I've turned it off and turned it on again, as well as hard reset.  Nothing has helped.

  • In spite of good wifi connection, I am unable to download the latest ios 6.1 on my iPad. Is there a solution?

    In spite of good wifi connection, I am unable to download the latest ios 6. Is there a way out? While I can access my mail, web and do other internet-related activities, I can't access Updates page on App store.

    Komalesha-
    Try again.  It is possible Apple's update server was overloaded when you tried before.
    Fred

  • I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

    I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

    Thanks,
    Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
    It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
    But thank you for your reply!

  • I have just updated to 10.7.3 and safari always reloads previous pages I have been on every time on open it, my home page is set to google yet it always reloads from the history, how do I stop this

    I have just updated to 10.7.3 and safari always reloads previous pages I have been on every time on open it, my home page is set to google yet it always reloads from the history, how do I stop this

    There is a setting in the System Preferences for this as well that may be causing it. Go to System Preferences>General>Restore windows when quitting and reopening apps - at the bottom of the window under Number of Recent items. Remove the checkmark from that setting.
    Also - if you close all of your windows when you are done with Safari - it should open to your home page.

Maybe you are looking for

  • Error in deploying EJB to oc4j 10g standalone

    Trying to deploy a simple EJB created with JDeveloper (version - 9.0.5.0.0 Build 1375 ) wizard for Dept table ( just two columns). When I try to deploy it to stand alone OC4J ( 10g ) version - Oracle Application Server Containers for J2EE 10g (10.0.3

  • Looking for a way to solve permission problem in windows 7

    one of the biggest problems i have with this windows that even that i'm an administrator and the owner of the computer i always have permission problems folders i get a no access errors with files and folders even thoughe i should have full permision

  • Cost centers in sales order creation

    I know it's possible to input the Profit center when creating a sales order (VA01)under the account assignment tab. Is there any configuration that can be done so that the user will be able to enter cost center? Thanks for your prompt response.

  • For those people that have a issue with MSI DVD that won't work right

    I  have an MSI K9 SLI Platium 7250 w/ an AMD Athlon X2 4600+ 2.4 GHz. I have MSIDVD that originaly came with my old Motherboard MS-680E AMD Atlon XP 1700+ 1.4GHz. When I upgraded MSIDVD wouldn't work right and every time I Would insert a a DVD MSIDVD

  • Images Go Missing

    I have a problem with missing images on my web pages. I will insert images, eithther by dragging and dropping, or using the insert feature. I publish, and all seems well. The next time I republish, though, the images disappear, and all I get is a que