IPhone 4: Had a bad fall, was working now won't switch on. Help!

My iPhone 4 had a pretty bad fall. The back is shattered but it was working fine. I plugged it in to charge and it reset and then switched off again and now it won't switch on at all
I need to get some info and a few pictures off the phone Please help

If the device will not turn on, there is nothing that can be done.

Similar Messages

  • My iphone 4g had tea spilt on it and now wont turn on. Help?

    I didn't realise until about half an hour after when I tried to use it. It's been about 2hrs now. I've tried drying it with a hair dryer... nothing!??!

    If any liquid got inside of the iPhone and this wouldn't happen if on the exterior only, a hair dryer is not going to get the interior components dry, and the longer the iPhone remains on and is used while any of the interior is wet, more damage is being done.

  • HT4061 Iphone suddenly turned off after it was working fine. How can I turn it on again?

    Iphone suddenly turned off after it was working fine. How can I turn it on again?

    Hi Bobgriff43,
    If your iPhone will not turn on, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    I am seeing if I can get another battery even though I do not believe that is the issue.  It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery?  It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage).  When just sitting idle it doesn't seem to turn off until that 55-60% mark.  It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
    Any other suggestions would be helpful... and I will get back to you if a new battery helps.  Thanks!

  • Hi i need some help im having problems the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums

    hi i need some help im having problems , the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums  . what can i do to turned on .
    its an ipod touch 64gb

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straig

    Hello I am having all of a sudden with my Face Tiime on MacBook Pro. I can't get it to verify my email address with I have always used. For some reason it had me log back in and now won't verify.It's always worked. No one can reach me. It goes straight to my phone instead of my MacBook Pro. Help!!

    Any error message?

  • HT3349 nothing shows in print view in numbers document, it was working now nothing

    When I go to print numbers document nothing is showing in print preview, it was working now nothing shows

    Grammy,
    What does your document look like? Does it have a large blank space near the top? Does the Print Preview graphic show move than one page to be printed. If so, what's showing for the higher page numbers?
    Jerry

  • The camera doesn't work on my iPhone 5s. It doesn't even work with camera apps. Please help!

    The camera doesn't work on my iPhone 5s. It doesn't even work with camera apps. Please help!

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • Iphone didn't switch off properly and now won't switch on

    iphone didn't switch off properly and now won't switch on

    Reset, hold both home and power buttons until the iPhone begins to start. If nothing, connect to wall charger for 10 minutes, it may come on itself. If still nothing, keep on charger and Reset, it may take about 20 seconds of holding both buttons while on charger. If still nothing battery may be completely dead and need replacement or something worse.

  • HT5058 my iphone quit syncing with icloud.  was working great and just stopped??

    my iphone quit syncing with icloud and outlook.  it was working fine

    Do you have an Exchange account?

  • HT201441 Why is my iPhone asking for activation if it was working perfectly fine?

    My phone was working perfectly fine but when I turned it on it said activation required, it asked for my Apple  ID AND I typed it in and it said "could not activate iPhone"! Why did this randomly happen?

    Did you recently update the iOS version or restore from backup?
    What is the exact complete text of the error message you are receiving?

  • I recently done new update now my charger isnt compatabile on my iphone 5.Any ideas? It was working fine before update.

    I recently done new update on iphone 5, now its not charging on my charger because its saying its not compatible and it was working fine before update.

    are you using an apple branded charger?
    i have heard ramblings that they built in incompatibility with UNauthorized chargers for safety reasons after all that happened in china.

  • How do I reopen a previous project I was working on in imovie?  Please help

    I had to work on two imovie projects.  I began the first one and I was about half done.  I had to start the second one so I created a "new project".  I worked on the second one, but now I want to go back to the first one to finish editing.  I go to "Finder" then the "movies" folder, then "imovie projects", then I pick my first movie project I was working on.  Imovie doesn't open the first project, it just goes back to my second project, but I want to edit the first.  So, how do I open a previous project I was working on in imovie? 

    Chan17Chan wrote:
    ...  I go to "Finder" then the "movies" folder, then ...
    wrong direction ...
    in iMovie, far upper left, click on the button 'Project Library'

  • Master detail against Oracle Lite was working, now broken -help?

    I have a master detail form running against an Oracle Lite database which was working fine. Today I made several changes - added create method so I could default some values, changed background colors, connected to the rest of the columns in the child entity, changed some display formats.
    Now whenever I try to update or insert on the child table I get errors:
    DAC-305: DbAccess commitTransaction failed. Session: Session1
    JBO-26041: Failed to post data to database during "Insert": SQL Statement " INSERT INTO CBC(DAY,HORSE_ID,WBC,HGB,HCT,PLT,MCHC,PMN,STAB,BASO,LYMPH,MONO,EOS,FECAL,MY,ALBUMIN,BL) VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?) ".
    Unhandled object
    on insert, or
    DAC-104: ImmediateAccess: setAttribute failed. ColumnView: Hct row: 1
    JBO-26080: Error while selecting entity for Cbc
    [ODBC S1C00] driver not capable of this operation
    on update.
    I've undone most of what I did today trying to figure out what broke it. Wish I had a backup! What gives? How do I debug this thing?
    Thanks, Bryan

    Solution:
    For Oracle Lite anyhow, you must be careful to use the right data types in the BC4J EO (Entity Objects). Timestamp works, Date doesn't. BigDecimal works, number doesn't. If the wrong data type is set the application will read and display data, but attempts to insert new data or update existing data will throw the errors above.

  • R9 270x was working now isn't

    System Specs -
    AMD fx6300
    Asus m5a97 r2.0
    8gb corsair vengeance
    1tb seagate barracuda
    msi r9 270x 2gb
    corsair 750w cx series
    i think my 270x has died, it was working last time i used it (xmas eve) now the tv it was plugged into only displays it whilst its booting, but when its booting it has a massive green overlay. the over tv i tried plugging it into displays only when the computer is booted, and when i give it permission to do anything it gives me a black screen and the tv says theres no connection, also when it does display on the tv it isn't scaled correctly so it is off the screen. every connection i've tried has been via hdmi as i don't have a proper monitor or cable to test it in any other way. i should also add, its not the tvs or the cables as i have tried all with my xbox one and that is fine. i have also had this since february, and not a single issue since then so i am pretty stumped...

    Have you updated to the latest AMD Graphics Driver 14.4 ?
    Do you have other graphics card to try?

Maybe you are looking for

  • Business rule assignment in Process Control 10.0, does not show any Control

    Hi All, I have created Organization, and assigned Mitigation control, as shown below. I have also created data Source and Business rule. But Business rule assignment is Blank for Controls. So, could you suggest, how can i see the Controls for the Bus

  • Radio group and textarea selection

    I have a form with a question like: "How did you hear about us?" and a radio group with some choices. One of the radio group choices is "Other - please describe!". When selected, a text area changes from "read-only" and the user can write something.

  • ABAP QUERY PROGRAM OUTPUT SHOULD DISPLAY FROM SAP SCRIPT.

    THIS IS MY URGENT REQUIREMENT ... I DONT KNOW ABAP QUERY PROGRAM .. PLEASE SUGGEST ME A WAY ON THIS .... Functional requirements Introduction The wish of the customer is a printable customer overview. All desired fields will be shown in a new query c

  • Adding a behavior to an image with a mask?? How can you...

    I want to apply the spin behavior to an image of a globe. Here is the tricky part. It has a mask on it that fades the bottom right side of the globe. How can I apply the behavior to the image but NOT the mask. I want the Mask to stay in place and the

  • FM not returning any data

    When using the FM GN_DELIVERY_CREATE i am not getting any delivery created for a PO.