IPhone 4s iOS 8 not working on phone a total mess
IOS 8 is not working on my iPhone 4s what a mess, my touch is not working properly, emails aren't working properly, what's app is not working at all and other little bitsit's a total mess, know idea of what to do: someone help me. Thanks
No idea of what to do.
Similar Messages
-
The ringer on my iphone 4S is not working.
the ringer on my iphone 4S is not working. Phone not on silent mode, no red dot showing, tried turning on and off completely
Sophiaand88 this seems to be a problem with an unknown solution and may be related to a recent update (?). I began having the same problem about 10 days ago when I upgraded to 6.1.3 software. Through research, I have learned that it is a relatively uncommon problem and there are no sound solutions and apple has not addressed it in a favorable way. Multlple suggestions out there including phone in the freezer, blow dryer to the wi-fi area. All sound crazy to me. I have personal hotspot that at least helps me for now. I will give apple a little time and hope a solution comes, but if not I will probably have to get a new phone. P.S. no one I dealt with at my sprint store had ever heard of this. P.s. I reset everything to no avail. Good luck.
-
Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!
if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.
-
My iphone battery is not working properly as compare to earlier after IOS 7 update.
Should i change my battery if yes then how much it will cost in india??Turning off things in settings, restoring as new phone, etc. everything I've seen on forums and CNet etc sites
-
i upgraded my iphone 4 ios and now my phone will not restore -
I have run into the same problem.
1. I was sharing the same itunes account with my wife for both of our iPhones 4s. She upgraded her phone to IOS7 two weeks before I did. After I did we ran into problems with messaging. Because we shared itunes account, both iphones were linked. When I sent text messages to someone, she got a copy. When they replied, she got a copy. I tried several ways to remove her phone from my profile, but would not work with new IOS7. I had to create a seperate itunes account for my phone in oirder to do so, as recommended on several help forums.
2. I backed up my phone onto itunes before setting up seperate itunes account. It showed that all the photos, contacts, notes, apps, etc. were synced and backed up.
3. I logged off itunes (former shared account- now wife's account), logged into new itunes account, and proceeded to restore my phone, while logged into my new itunes account, thinking this would delete my wife's phone from the profile as shared devices.
4. Phone would not restore by automatically syncing with itunes, by selecting back up recovery file to recover, or even by deleting everything and starting fresh as if it were a new phone, then trying to restore the data file as if it were recovering the backup info onto the new phone.
5. I get the same **** initialization loop sequence on the iphone every time, even after itunes goes through the recovery process, syncing all data, etc., multiple times. The iPhone loops through the grey screen "Welcome" in different languages, then asks which wireless server I want to connect to, enter passcode, then asks if I want to set up phone as a new device, backup from iCloud, or from iTunes backup. It does not matter which I select. It prompts me to connect to iTunes again. The point is, I have already been through these procedures and the iPhone cannot get past this point and enter run mode, showing me a screen with all my recovered settings.
For time being, just to have a functional phone, I have had to delete everything off the phone and set it up as a new device, back to factory settings. Then the phone will get past this and enter into run mode showing screen and apps with factory settings, no contacts, no email ( have to set up again), no voice mail ( have to reset).
Any ideas on how to over ride this reset mode in the iPhone, when all I want to do is download and recover settings from a backup in iTunes to the device? -
WiFi iPhone 4S does not work after update iOS 6.0
WiFi iPhone 4S does not work after update iOS 6.0
This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty? -
If my IPhone 5c is not working and I have to trade it for a new phone can I get a 5s or do I have to trade it in for another 5c?
A warranty or out of warranty replacement through Apple will be for the same model, same capacity, same colour.
-
I download the new IOS7 in my iPad beeing in the usa And where I come back to my country appears me again to upad te my iPad of ferina the IOS 7. I did it my iPhone And is not working as before.what i must do
I'm sorry, but I do not understand what you are asking or saying. Perhaps you could clarify a little bit.
-
my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...
Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.
-
i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.
I am seeing if I can get another battery even though I do not believe that is the issue. It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery? It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage). When just sitting idle it doesn't seem to turn off until that 55-60% mark. It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
Any other suggestions would be helpful... and I will get back to you if a new battery helps. Thanks! -
My iPhone 5 is not restoring because it is locked with a passcode , it's the same computer and I m entering the password and it's not working the phone is not responding
http://support.apple.com/kb/HT1212
-
My speakers from my iPhone 4S is not working I'm clicking on the buttons on the side nd the volume is not even showing getting louder or lower but when I plug in my ear phones I can hear it juss happen out of no where what sould I do ?
Your iPhone charging port may have a minor short, causing iPhone to falsely sense it is connected to a dock turning off its speaker. Clean iPhone charging port with a clean dry toothbrush.
-
When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..
Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
IPhone 6 plus speaker is not working on phone
Speaker not working on phone calls
Ok. That's nice.
Do you have a question you would like to ask? What troubleshooting have you done? -
My volume button to lower the volume on my iphone 4 is not working
My volume button to lower the volume on my iphone 4 is not working. I got a new phone case and I think it jammed my volume button. How do I fix this? The button to raise the volume is working.
Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.
Maybe you are looking for
-
Public Folders missing in XI 3.1
How can I allow an end-user to see the Public Folders link in InfoView XI 3.1? It was there in XI R2, but disappeared in XI 3.1. I can still see it when I login as Admin.
-
How can I cancel a netflex account purchased through iTunes
Hi can you please help me to cancel my netflex account
-
Jdeveloper deploying error: oracle.bpel.services.datacontrol.types.Number
I have migrated a BPEL process from 11.1.1.3 to 11.1.1.5. When deploying my migrated BPEL process from JDEVELOPER I get the following error: java.lang.ClassNotFoundException: oracle.bpel.services.datacontrol.types.Number I found this: http://www.oras
-
Errors occurs during installation Photoshop CS6 Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DB005, DB009 ... -------------------------------------- Summary -------------------------------------- - 14 fatal e
-
Statistical-relevent delivery date not showing up in PO after upgrad to ECC
Hi Gurus, After upgrade to ECC, Statistical-relevant delivery date (PO Item details --> delivery schedule tab) is not showing up when I convert PR to PO from Stock requirements list(MDO7). Could you please help me out this issue.