Iphone 4s keeps beeping when plugged in i have blank screen but itunes recognizes it but cant allow access because of the blank screen

iphone 4s keeps beeping when plugged in i have blank screen but itunes recognizes it but cant allow access because of the blank screen

As your iPhone is getting connected to iTunes take a backup of your iPhone in iTunes : http://support.apple.com/kb/ht1766
And then Restore your iPhone to Factory settings and see if it works and if that doesn't fix the problem then there might be something wrong with the Hardware and you will have to take your iphone to Nearest Apple Genius Bar.
Restore iPhone : http://support.apple.com/kb/ht1414

Similar Messages

  • I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    All media and apps should be in iTunes on the computer.  Simply select the content desired to sync to the device and sync it.
    FYI, backups have never included media or apps.
    Downloading past purchases from iTunes

  • Why does my iPhone 5s keep crashing when I make a new radio station in iTunes Radio?

    This happens whenever I am streaming iTunes radio and decide to create a new radio station. No sooner do I click create to make a new station and the apple logo comes up as my phone begins a complete reboot.  Am I alone in this?

    Take it to an Apple store for evaluation...

  • When connecting my iphone to the computer all goaes well on the sync (ing) is that when its finished I have a message that itunes is waiting for changes to be applied and the programme will not finish the complete sync!! any answers please.

    When connecting my iphone to the computer, all goes well with the sync until the last step. Step 6. It says "waiting for changes to be applied" and won't complete the sync!! anyone know how to rectify.

    I'm having the exact same problem.  Using iTunes 1.1.5, iPhone 5 which is updated. 
    Computer is running OS X version 10.9.2

  • With "Do Not Disturb" active, why does the iPhone beep when plug in for recharge?

    With "Do Not Disturb" active, why does the iPhone beep when plug in for recharge?
    I usually go to bed after my wife. I have the Do Not Disturb set for 11 pm to 7 am, and I can see the moon symbol.
    So why when I go to bed at midnight and plug in my iPhone to recharge do I get a LOUD BEEP?
    My wife is banning my phone from being next to my bed and an alarm clock.
    To me it seems that the "Do Not Disturb" should turn this beep into a vibrate.

    section2i:
    If that is true, then you should file that as a bug using the link above:
    If I am reading what you are saying correctly, you are saying that when vibrate is 'off', and you turn on the phone and plug it in that a vibration occurs, and that it is not respecting the vibrate 'off'.
    That would be a slightly different issue from what I am asking about (Do Not Disturb), and would probably need a separate bug report.

  • New iPhone 5c keeps beeping and the screen just stays black.

    new iPhone 5c keeps beeping and the screen just stays black?

    Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

  • My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?

    My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?

    1.  If you are really on iOS 7.1, you may wish to try upgrading to 8.1.2 which is the latest (basing this on your signature).
    2.  If updating the phone doesn't help, is this only when you connect to a specific wifi network?  Or all wifi networks (including public with no password)?  If it is ALL wifi networks, you may have a hardware problem.  Genius bar would be the next step.
    Make a Genius Bar Reservation (or cancel an existing reservation)
    http://www.apple.com/retail/geniusbar/
    Sign in using your Apple ID

  • Iphone crashed after update it wont recognise itunes when plugged in and do anything besides display itunes needs to be connected

    iphone crashed after update it wont recognise itunes when plugged in and do anything besides display itunes needs to be connected please help

    "I bought it a couple of weeks ago"
    Bought it from where? I ask because given what you have already tried, it would appear that this iPod needs either service or exchanging for another one.
    Did you buy this as new from a reputable source?

  • Iphone 5 is beeping when I connect it for charging

    iphone 5 is beeping when I connect it for charging. whats' up with that??

    I use my 5S for my alarm each night only heard this for the first time a few days ago. took me about 10 minutes to find the beep as it was extremely quiet however discovered it was infact the phone. I flicked the mute button and I've never heard it since. It seems to only be audible when not on mute, given that its so quiet it probably does it 24/7 just had never noticed.

  • My iPhone 4a keep telling to plug it in to iTunes and restore it I do that and then the next day it ask me to do the same thing what is the problem?

    My iPhone 4a keep telling to plug it in to iTunes and restore it I do that and then the next day it ask me to do the same thing what is the problem?   I need and trouble shoot or some type of solution for this problem.

    If you have restored as new and the device continues to go into restore mode, then it appears you need to make an appointment at the Genius bar as there could be a hardware issue with your device.
    One last question, the phone has not been hacked/jailbroken, has it?

  • IPhone will not charge when plugged into computer

    My phone was not working, and so I took it to the apple store nearby. Here were the problems:
    -error message saying "this device not made to work with iPhone"
    -would not charge when plugged into computer OR wall charger
    -person on other end of phone calls said i sounded really far away and had trouble hearing me
    -when i shut it off, it restarts itself immediately
    -cant do a manual reset holding the power and center buttons at same time
    -when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
    At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
    Is there any way they will replace my iphone at no charge?

    Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
    And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
    I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
    But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say.

  • Itunes won't recognize my IPhone, it still charges when plugged in though. Help?

    Itunes won't recognize my IPhone, it still charges when plugged in though. Help?

    Hello Lana
    If the iPhone is not recognized in iTunes, the following articles will be of assistance depending on what operating system your computer runs.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Iphone wont turn on. i plug it into charger and it stays at 87% and then i take it out of the charger and it shuts off. and then i try to turn it on and wont turn back on until i plug it back into the charger. HELP ME PLEASE!!

    iphone wont turn on. i plug it into charger and it stays at 87% and then i take it out of the charger and it shuts off. and then i try to turn it on and wont turn back on until i plug it back into the charger. HELP ME PLEASE!! how do i fix this?!

    Hello StephanieeLovezYou,
    Thank you for the details of the issue you are experiencing with your iPhone.  I would be concerned too if my iPhone was only turning on when connected to power.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Windows keeps shutting down after ipod plugged in.  Have uninstalled and reinstalled itunes several times - still happening., Windows keeps shutting down after ipod plugged in.  Have uninstalled and reinstalled itunes several times - still happening.

    oblem signature
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 11.0.1.12
    Application Timestamp: 50c8fc7e
    Fault Module Name: CoreFoundation.dll
    Fault Module Version: 1.630.18.0
    Fault Module Timestamp: 50a590d1
    Exception Code: c0000005
    Exception Offset: 000015be
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105
    Additional Information 1: 9c79
    Additional Information 2: 18d391556384f03f39cb1810be4919d6
    Additional Information 3: cbd8
    Additional Information 4: 7823eb2f440e23b0eb8dcc58dcf1c44e
    I use Windows Vista - I read other questions and none seem to have the above problem codes - Help please.  I tunes seems to be OK, but once Ipod plugged in, this is when I tunes states it is not working and program has to be closed.  Help please.

    First, plug off your iPod.
    Then uninstall iTunes + all of Apple services (google them).
    Restart the PC.
    Install iTunes.
    If that doesn't help, try this:
    http://support.apple.com/kb/TS1567
    You should consider moving to Windows 7.
    Cheers.

  • HT4623 so when i plug any of my devices into laptop windows recognizes it but itunes wont. how to get itunes to show device pluged in

    so when i plug any of my devices into laptop windows recognizes it but itunes wont. how to get itunes to show device pluged in

    Hello, joegoducks. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

Maybe you are looking for

  • Problems selecting paper bin/source with some printers drivers

    Hi, I'm using CR2008 SP2 .NET SDK. With some printers drivers i'm unable to set the correct paper source in the print options. For example, if I use Toshiba e-series PLC driver (you can find it here:drivers and select, for example, the e-STUDIO281C p

  • Adobe Reader/Acrobat Is not Installed

    I get an error on machines on our work network that says Adobe Reader/Acrobat is not installed. However most cases it is installed on the machine and in most cases it turns out to be the 8.1.1 version of Adobe reader. So what we have noticed is that

  • OMS version

    Hello, I am looking to find my correct OMS version. When I check my emctl status agent I get my oms verison higher that what I get from my OEM10G instance grid home page version. Shouldn't this two be the same ? Thanks.

  • Unable to dual boot Windows Server 2008 On My new HP laptop

    Hello, I have recently purchased a laptop from HP Site. Here are the specifications of my laptop. OS : Windows 8.1 HP ENVY 17T 4710HQ PROCESSOR 16GB RAM I have  created a new NTFS Partition and I am trying to install WINDOWS SERVER 2008 from setup fi

  • Using Command to fix null / left outer join issue

    Hi I was told awhile ago that it's possible to fix crystal's issue with left outer join and null records being eliminated. I think i remember most of how this goes, but i can't seem to duplicate it. 1) You can't have any select expert -- record 2) Yo