IPhone and Windows Remote Desktop Connection

Will iPhone run MS Remote Desktop Connection so I can get email from work?

I TRIED THE RDMPLUS PROGRAM - COULD NOT GET IT TO WORK - COULD NOT GET RESPONSE FROM COMPANY. HOWEVER, I HAVE HAD GREAT SUCCESS THIS WEEKEND WITH A PROGRAM CALLED "FILE 2 PHONES". YOU CAN GO TO www.f2p.com AND CHECK THEM OUT. THEY HAVE TERRIFIC SUPPORT AVAILABLE (I ACTUALLY TALKED WITH A VERY KNOWLEGEABLE "LIVE PERSON" ON THE WEEKEND IF YOU CAN BELIEVE IT). CALL AND ASK YOU QUESTIONS ABOUT SECURITY.

Similar Messages

  • Difference between Terminal server connection and MSTSC remote desktop connection

    Hi everyone , Wats the main difference between Terminal server connection and MSTSC remote desktop connection? Well both are used to connect a server remotely. right!
    Are there any much difference between them?

    RDP is a protocol and MSTSC is the RDP client.
    In the situation you are referring to, you use MSTSC (RDP Client) in both cases, but when you connect to a client PC (Windows 7, Windows XP, etc) you can only connect if nobody is using that PC at the moment, if you connect to a server you can work along with
    some other users. Server OS supports 2 connections by default, if you want more people you need Remote Desktop Services and RDS licenses.
    Thanks,
    сила в справедливости

  • Can't get rid of the black window Remote Desktop Connection left on my screen

    MacBook Air thinks that Remote Desktop Connection is open but I can't close the black window (where it shows the IP Address of the computer I had remoted into). It left the black windown opened on my screen. I can't even click on any menu tabs or take the app to the trash because it thinks it's still open. Well aware I can use different screens on my Mac but I want that black window gone! Thanks.

    I don't understand what you mean when you say 'I can view the main pages', but, you've probably set your video playback to full screen.
    Move the cursor to the top of the screen and go to View, down at the bottom of the list go to Video Playback, and then select 'None' from the list of options.

  • Windows 7 desktop and windows 8 desktop connected to router

    I have a windows 7 64 bit desktop and a 7510 e photosmart printer connected wireless, though the desktop is wired, I purchased a windows 8 desktop and connected it to my router and set up my email account and it did pick up my printer and could print but not scan or EFax, now I get a 1625 message and cannot print from it.
    I tried to download the print and scan wizard from HP web site but my PC froze up.
    Do i have to run the disc or set up a home group, not bothered about being able to E Fax or scan to email with it, just need it to print as it did before.
    Also on my windows 7 I can log into HP connected and my printer shows up ok, when I press the icon on the printer for Eprint it shows my HP email address but when I press the Fax icon it says NOT CONNECTED TO ANY NETWORK. Cloud services set up a static IP address for me last year as each time we had a power outage I lost my connection to my printer. If anyone can help I would appreciate it.
    This question was solved.
    View Solution.

    Emma22, welcome to the forum.
    Here is the Win 8 driver for the printer.  Installing them should correct your problem.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • VPN and Remote Desktop Connection

    I have a standalone windows 2012 server that runs a domain with a few workstations. I have successfully configured a PPTP VPN and can connect using a Windows 7 computer at home. Once connected to the VPN, I can Remote Desktop to the server - but not any
    other computers. The computer I'm trying to connect to runs Windows 7 and has remote desktop connections enabled.
    Under the Access Details in the Remote Access Management the VPN connection is shown correctly first to the router (x.x.x.1) then the server (x.x.x.2) under Protocol 17 and Port 53. Then the server is shown again under Protocol 17 and Port 3389, which must
    be the Remote Desktop connection. And then the workstation on the domain (x.x.x.20) also shows a connection with Protocol 17 and Port 3389. However, the remote desktop connection fails everytime. I'm not sure where the issue exists since it appears the server
    is seeing and acknowledging the remote desktop connection. On my router I have PPTP passthrough enabled and port forward 3389 to the server.
    I have attempted to use the workstations internal IP address as well as the computer name (workstation and workstation.domain.local) when connecting.
    Thanks for your help.
    I just noticed these three event errors on the destination remote machine. Not sure why it's trying to use L2TP?
    Failed to apply IP Security on port VPN2-1 because of error: A certificate could not be found.  Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate..  No calls
    will be accepted to this port.
    A certificate could not be found. Connections that use the L2TP protocol over IPsec  require the installation of a machine certificate, also known as a computer  certificate. No L2TP calls will be accepted.
    The Secure Socket Tunneling Protocol service either could not read the SHA256 certificate hash from the registry or the data is invalid. To be valid, the SHA256 certificate hash must be of type REG_BINARY and 32 bytes in length. SSTP might not be able to
    retrieve the value from the registry due to some other system failure. The detailed error message is provided below. SSTP connections will not be accepted on this server. Correct the problem and try again.

    Morning Trent,
    I don't know if this is still an issue for you, did you get it solved?
    If not, check on the server whether the user credentials that you're using to RDP to the workstation are actually authorised server-side. If that checks out, on the VPN connection you can specify a protocol to use. Specify the protocol that your VPN is configured
    to use on the server.

  • Unable to connect to my home PC from my home Mac using Windows Remote Desktop

    i have downloaded from the Microsoft website and also the Application from the App store and both fail to connect. i have connected to my PC using the migration assistant so they are able to recognise each other.
    on the Mac:
    - downloaded the app and also done the download from MS website - both fail and suggest to check that remote access is enabled.
    on the PC:
    - have my Ipaddress from "IPConfig"
    - have enabled remote access through windows firewall
    The PC is on and has a password enabled 
    Error on App:
    "Unable to connect to remote PC. Please verify remote desktop is enabled, the remote pc is turned on and available on the network and try again"
    both are connected to the internet and on the same home network. Can anyone please advise to any additional steps as this seems as though this should be really straightforward. as another note i don't have another firewall software interrupting - am just
    using windows firewall until i can get this working.

    Hi,
    Firstly, please refer to the article below to enable remote desktop connection on your Windows 7.
    Remote Desktop Connection: frequently asked questions
    http://windows.microsoft.com/en-us/windows/remote-desktop-connection-faq#1TC=windows-7
    On your Mac, you can download the app here.
    https://itunes.apple.com/hk/app/microsoft-remote-desktop/id715768417?mt=12
    More information:
    Getting Started with Remote Desktop Client on Mac
    http://technet.microsoft.com/library/dn473012
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Another Windows 8.1 Remote Desktop Connection Issue

    I want to connect to my PC running Windows 8.1 from my tablet running 8.1. I have allowed RDC in the windows firewall. I open RDC on my tablet and enter my PC computer name, KENSPC, into the Computer field and get "Remote Desktop can't connect to the
    remote computer for one of these reasons:
    1) Remote access to the server is not enabled
    2) The remote computer is turned off
    3) The remote computer is not available on the network.
    I get the same message when I use the IP address for the PC.
    My PC is wired to my router and my tablet is wireless and both use my Microsoft account for credentials. I can ping the PC from the tablet, so I know the tablet can see the PC and I can open files on the PC from the tablet. I have "Allow
    Remote Assistance connections to this computer" turned on. And I have, in fact, had HP help via remote assistance. But nothing I do seems to work. The steps as specified in the Helps do not work. Any help would be appreciated.
    kenfrantz at outlook dot com

    Hi,
    According to your description,we need to know the detail edition of your remote PC.
    You can use a PC running any edition of Windows XP, Windows Vista, and Windows 7, or a PC running Windows 8, Windows RT, Windows 8.1, or Windows RT 8.1 to initiate a connection.
    But the remote PC must be running one of these Windows operating systems:
    Windows 8.1 Pro ,Windows 8.1 Enterprise ,Windows 8 Enterprise ,Windows 8 Pro ,Windows 7 Professional ,Windows 7 Enterprise ,Windows 7 Ultimate ,Windows Vista Business ,Windows Vista Ultimate ,Windows Vista Enterprise ,Windows XP Professional.
    Also, I would like to share the following article with you:
    http://windows.microsoft.com/en-us/windows/remote-desktop-connection-faq#1TC=windows-8
    http://www.microsoft.com/en-us/windows/enterprise/products-and-technologies/windows-8-1/compare/default.aspx
    Hope this helps.
    Regards,
    Kelvin Xu
    TechNet Community Support

  • Remote Desktop Connection Expert Question...

    I am looking for someone with a lot of experience with Windows Remote Desktop Connection to answer a basic question or two...
    I have a WireShark capture (only one side unfortunately) which shows 880 MBytes sent from the client running the Remote Desktop Connection, to the host; but I have no WireShark capture of the packet volume coming from the host to the client IP address. The
    capture is for a period spanning 32 hours. I am being asked to try and determine (guestimate) the amount of data that might have been sent from the host to the client... I know this is a real out there question; which is why I'm looking for someone with
    real Remote Desktop Connection experience.  
     Given that if the volume of traffic from the client to the host is 880MBytes over 32 hours; is there any way at all of guessing how much might have been sent from the host to the client?
    Please be kind, this is important and I am presenting all of the information I have.
    Thank you!

    Hi,
    Agreed with T.Murr here. Only based on the networks traces from one way connection, is hard to determine what happens on the other side.
    Besides, hope the following information would be helpful here:
    Top 10 RDP Protocol Misconceptions – Part 1
    Best regards
    Michael Shao
    TechNet Community Support

  • Remote Desktop Connection with WRT54G from Novice

    Well, I’m usually pretty good at using Google and forums to eventually figure out how to fix my problem but this one absolutely has me stumped and I’m hoping someone out there has an answer for me. For the record, I have probably a beginner/intermediate knowledge of computers so if you know the answer to my problem, try to explain it simply! ****TO ANYONE WHO TAKES THE TIME TO READ THIS THING AND CAN OFFER SOME ADVICE-THANK YOU!!!!***
    THE PROBLEM
    I would like to be able to use Remote Desktop to log into either of my home computers from basically any computer on the internet.
    THE SETUP
    I have two computers, whose names are LAPTOP and DESKTOP that are both running Windows Vista Ultimate. Both of the computers are connected to a Linksys WRt54G Router ; one wired, the other wirelessly. The Linksys router is then connected to a Westell DSL Modem that connects to AT&T’s internet service.
    SETTINGS
    My DSL service only provides me with a dynamic IP address so I signed up with no-ip.com. Through that site, I bought a domain name and downloaded their small program that runs in the background of my desktop computer. The program checks what my IP address is every couple of seconds and if it changes, it notifies their server so that anyone who types in my domain name is directed to the new IP address.
    ROUTER (Firmware 4.20.6)
    Basic Setup Page: The Router Name is just the model number, the Server Name is my DSL provider and the Domain Name is the name I chose and registered with No-IP.com. (www.mydomainname.com, for example.) DHCP Server is ENABLED. DDNS Service is DISABLED. Under Advanced  Routing, it is set in GATEWAY mode.
    Security Page: Firewall Protection is ENABLED. Block Anonymous Internet Requests is NOT checked. Filter Multicast, Filter Internet NAT Redirection and Filter IDENT ARE checked.
    Applications and Gaming Page: I chose two port numbers, one for each computer that I want to connect to. On the first line, I have Application: RDP, Port Range: 49200 to 49200, Protocol: Both, IP Address (The IP address of the computer I want to connect to) and the Enable box IS checked. [I did the same thing with the second line for the other computer, but with a different port number and that computer’s IP address)
    Administration Page: Access Server is HTTP, Wireless Access Web is ENABLED, Remote Management is ENABLED through Port 8080, and UPnP is ENABLED.
    WINDOWS VISTA SETTINGS
    First, I went to the Remote Desktop Settings of the target computer and ENABLED Remote Desktop Connection and allowed computers running any version of Windows. I also confirmed that the box labeled “Allow This Computer To Be Controlled Remotely” WAS checked. I then made sure that I had a user name, it had a password associated and that it had Administrator priveledges. I went back to the Remote Connections screen and added the user name as being allowed to connect. (I think this is redundant since it’s both the owner of the computer and has Administrator Status.)
    Next, per Randomly Googled Internet Advice, I went into the registry and changed the port number that Remote Desktop listens for incoming connections to Port 49200 to match the router settings. [Registry Entry that I modified was: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp]
    Finally, I went to the Windows Firewall and Added (opened) port 49200 for use as a Remote Connection. I kept the protocol as TCP and confirmed the scope was set for Any Computer.
    CURRENT STATUS
    If I go to Explorer and enter my IP address with a colon and the specify port 8080, I can get the login screen for the router. Same thing happens if I just enter my domain name and port 8080. However, if I switch the 8080 port and use one of the ports I chose (49200), it cannot connect, either using the Public IP address or the domain name. (I’m trying to connect using a wireless card and not connected to my local network so I know it’s the same as if I was anywhere else.)
    I’m not sure why it won’t let me connect; it feels like the router will not allow the connection to pass through it to the port I’m asking it to forward to. I’m guessing someone out there who took the time to read it is shaking their head at all the information I provided and knows the one dumb thing I missed!
    Thanks again!

    I'm attempting to do the same thing with my home network. the only differences are that i have cable internet from comcast and i'm running vista business. my router is the wrt54gs. i'm assuming that the web page is similar for adjustmants. To be honest i cannot figure out how to do a remote destop too. so i went to www.logmein.com and installed the program. once installed to to every computer you want to have access too and log into the website. then click on the add computer icom. full control app sharing etc... even better when you connect you have the option to deactivate the local host mouse and screen to prevent anyone seeing what your doing.
    If you resolve the router issue would you let me know. plz thanks
    Forest

  • SQL Server jobs fail if I signout the Remote Desktop connection

    I have some SSIS jobs running in the production server which we usually take that server by Windows' Remote Desktop Connection to monitor the jobs. The problem in our case is If we sign out the server in remote connection, all the sql server jobs getting failed
    until we reestablish a remote connection but the jobs work fine if we close the remote connection explicitly by the (x) mark on the Remote Connection interface
    Any idea on this issue

    always same error like the following
    Code: 0xC0014009     Source: Connection manager "Invoice"     
    Description: There was an error trying to establish an Open Database Connectivity (ODBC) connection with the database server.  End Error  Error: 2015-01-12 08:00:05.26     Code: 0x0000020F     Source: DFT GetData  [2]  
    Description: The AcquireConnection method call to the connection manager Invoice failed with error code 0xC0014009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.  End Error  Error:
    2015-01-12 08:00:05.26     
    Code: 0xC0047017     Source: DFT GetData SSIS.Pipeline     
    Description:  Data failed validation and returned error code 0x80004005.  End Error  Error: 2015-01-12 08:00:05.27     
    Code: 0xC004700C     Source: DFT GetData SSIS.Pipeline     
    Description: One or more component failed validation.  End Error  Error: 2015-01-12 08:00:05.28     
    Code: 0xC0024107     Source: DFT GetData      
    Description: There were errors during task validation.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  8:00:00 AM  Finished: 8:00:06 AM  Elapsed:  5.678 seconds.  The package execution
    failed.  The step failed.

  • Cannot log onto windows remote desktop

    How can I log into my office's windows remote desktop. I am very new to the Mac and need some help with this. I have downloaded and installed the Windows Remote Desktop Connection, but i dont know how to use it. Do I need to have a different program to get online and not use Safari.
    Please keep it simple, I am not a programer, just a program user.

    I USE REMOTE DESKTOP TO CONNECT TO A WINDOWS SERVER AT WORK. YOU MUST OBTAIN THE IP ADDRESS OF THE SERVER AND PUT THAT IP ADDRESS INTO THE RDC WHERE IT ASKS COMPUTER. YOU WILL ALSO NEED THE NETWORK USERNAME AND PASSWORD TO GET ON THE SERVER AT WORK. I ALSO BELIEVE THE SERVER AT WORK NEEDS TO BE SET TUP TO ACCEPT REMOTE CONNECTIONS.

  • Remote Desktop Connection not working

    I am able to remote desktop connect to my home computer from work; however, I can't remote desktop connect to my work comptuer and server. I believed it has something to do with my Linksys E3000 access point settings but I'm not sure where to look for and verify. I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network. I also VPNP in to my work place so that it has the same IP address as at work and still, remote desktop connection from home to work is not working. Any suggestion is much appreciated.

    thebluemamba_24 wrote:
    Connecting from home to your remote desktop server has nothing to do with your router. Certain ports are needed to be opened from the server’s end in order to host an application. Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work. In case it will not work, then contact your IT guy.
    If you read my previous post it said:
    "I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network."
    I think my above statement answers your question of "Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work." However, your statement prompts me think of something else. What I have tried is bring my laptop to work and tried connect via RDC to the server and it works but it just not working when trying at home. What I have not done is instead of brining my laptop to work and try RDC there, perhaps I should I try it on a friend's or relative's network and see if I can do RDC to my server at work. If this does not work as well, then, could it be that at work there is something something outside RDC coming? But even if this is so, why can't VPN work?

  • Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

    I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
    There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
    One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
    machine 10.6.1. with RDC 2.0.1 (non-working)
    9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
    On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
    9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
    9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
    Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
    Any help would be appreciated

    Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

  • Pro Dock Remote Desktop Connection

    I have a Thinkpad X1 Carbon (20A8S0450X) that uses a ThinkPad OneLink Pro Dock (4X10E52950) to drive two external monitors.  Therefore, in normal operation, I have 3 screens visible.  The main display is set to one of the external monitors.
    I often use a separate PC and use Remote Desktop Connection to access the laptop above.  When I finish the session after a period of time, and return to the laptop, the screens are all blank and will not reactivate.  Unplugging the docking station from the laptop does not resolve the issue as the laptop monitor remains blank.  I therefore have to perform a hard reset to reboot the laptop to continue using it.
    Has anyone else experienced this problem?  Is anyone able to assist with a resoltuion to this issue?
    Thanks in advance

    Hi,
    Configure Network Level Authentication
    Click Start, click Run, type regedit, and then press ENTER.
    In the navigation pane, locate and then click the following registrysubkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    In the details pane, right-click Security Packages, and then click Modify.
    In the Value data box, type tspkg. Leave any data that is specific to other SSPs, and then click OK.
    In the navigation pane, locate and then click the following registrysubkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders
    In the details pane, right-click SecurityProviders, and then click Modify.
    In the Value data box, type credssp.dll. Leave any data that is specific to other SSPs, and then click OK.
    Exit Registry Editor.
    Restart the computer.
    Hope this helps!
    Andy Altmann
    TechNet Community Support

  • WIN remote desktop connection

    i am a new mac user need to download and install remote desktop connection for mac have tried several times after download all i have is a excel doc.
    i need it to work with Terminal Server 2003
    mac bookpro   Mac OS X (10.4.8)  

    You need to install Stuffit Expander, available free from Stuffit.com to open the download.

Maybe you are looking for