[iPhone beta 6] run time error

Hello, so my application use to run fine and all that now I get this:
* Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[UIView flashScrollIndicators]: unrecognized selector sent to instance 0x452340'
I'm not sure what this means. I never use flashScrollIndicators so I wouldn't know where to place a catch.
Anyone know what this means?
Thanks,

In plain English (as I understand this): Oracle posted drivers that we won't be able to use until 8.1.6 comes out. The readme does indeed say, "JDBC OCI Driver 8.1.6: Client-side JDBC for use on a machine where OCI 8.1.6 is installed." Plus, the FAQ states, "There is no 8.1.6SDK JDBC-OCI driver - this will be available with 8.1.6"
That FAQ was just updated (it is the top item on today's Technet front page).
But the FAQ is erroneous: the driver exists and is available: from an item on the technet front page (from Jan 17th).
We don't have Oracle 8.1.6 here and it doesn't appear to be available yet.
I imagine that this driver was made available for the beta testers out there needing it and also for the rest of us to be able to check ahead if we can still compile.
I do wish they would plainly say as much on that download page (or in the readme). It would have saved some trouble chasing down why this doesn't run.

Similar Messages

Run time error while saving sales order

Hi all,
i am working on IDES ECC 6.0, when i am saving an sales order(OR) i am getting run time error in the table CRMPAROLTP, program SAPMV45A.
i am using 4 GB RAM, still having a space of 30 GB for only IDES to save the data.
so, how to solve it.

Hello,
I doubt the runtime error (I am assuming you mean that you got a short dump) you mentioned in your original post has anything to do with the warning messages you see when doing a check (Ctrl+F2) on table CRMPAROLTP and program SAPMV45A. These warnings should not cause a short dump or runtime error.
The warning message for the table has the following long text:
Table CRMPAROLTP: Key length > 120 (Restricted functionality)
Message no. DT214
Diagnosis
The key length, i.e. the sum of the field lengths of all the key fields of the table, is more than 120 bytes.
System response
This is a warning.
Procedure
Note the following restricted fuctionality for this table:
- Table contents cannot be transported by specifying key values, at
best by specifying generic key values with a maximum length of 120
bytes.
- The table may not be used as the base table of a lock object.
The warnings in SE38 for program SAPMV45A are mostly related to Unicode and have no reference to the table CRMPAROLTP.
If you haven't already done so, please check the SAP Note referenced in my first reply since this does provide a solution for short dumps related to table CRMPAROLTP.
Of course, since I don't know specifically what the short dump message is that you received, I could be basing my assessment on false assumptions. If you have those details it is better for the SDN community as a whole if you include the information in this thread instead of sending it to me offline.
Best Regards,
Jamie

Run time error while activating the Transfer Rules

Hi,
Error when activating Transfer rules for Infosource :
0FI_GL_1 -
(General ledger: Transaction figures)
Run time error : ASSERTION FAILED
Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
Thanks,
Kishore

Hi,
As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
It is always better to import the latest patches avialble in service market to avoid this type of problems.
Also see tha note 1010672 amd check whether it is applicable to your problem.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Automatic Retry run-time error step in TestStand

Hi, I am using an instrument at many places in my sequence (let's say 5 times). I am using the Labview instrument driver. Sometimes (every 50 calls), the instrument driver call gives me a run-time error because the instrument is somehow busy. But usually by doing a retry on the step that caused the run-time error, it works. However, in few cases, the instrument is really defective. In order to make my sequence more robust, I want all that handled in TestStand (I want the operator to stay away from the big grey popup. Many of them freaks out when they see this…). I was thinking adding 2 callbacks to my sequence: 1) Post run-time error: a. If local “index” == 1, run cleanupb. If “index” == 0, retry the current step (by manipulating the current step id)c. Incrementing “index” to 12) Post step:a. If step.Result.Status != “Èrror”, ”index” = 0 Index is a local variable in my sequence This algo might work, but is there another way of doing this? You can loop on the failures, but not on the errors.
Thanks
Alexandre

Alexandre,
there are many ways to accomplish your task.
Here's a small list:
- Disable default error handling and "do error handling in your sequence" (using gotos with precondition)
- Use the SequenceFilePostStepRuntimeError Callback
- Handle the retry-functionality within your codemodule
I'd suggest you to choose either the second or third option. As Juergen already stated, you can alter the behaviour of TS in regard to runtime errors. The default behaviour displays a dialog asking the operator on how to react. On automated systems, this setting is nonsense, therefore it is suggested to switch to "Run Cleanup". I wouldn't choose any other setting here.
Using the Callback Sequence is nice since it can be used in a very general way and you can call certain alternativ test strategies if the instrument fails to work.
Implementing the error handling within the codemodule nevertheless optimizes execution times and could be better in other aspects as well. But on the other side, you have to deside what should happen if the error cannot be solved by the module itself.....
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

KE30 Report:-Takes very long time and ends in a Run time error

Hi Expert,
Since last three week (after up gradation of system) we are not able to run any of KE30 reports in Production system and its end with Run Time Error. Even in development system where data is minimum it is taking 45 Minutes to give output where it should take maximum 4-5 Minute. Before up gradation it was working fine
What could be the reason for this and how can i resolve this.
Thanks in Advance
Bipin Tiwari

HI Sridhara
Thanks for quick response. After Up Gradation we ran SGEN T-code but no impact on system performance. There after we build new summarisation level in KEDVP (system proposed) and activated it but still it is taking 30-.35 minute to generate the report in Development system which should normaly take 1-2 Munite.
Can you suggest what else we can do or is there any better way for build summarisation level in given scenario.
Best Regards
Bipin Tiwari

Trapping Run-Time Errors

We have defined a Setup Function in a sequence we are running. When a 'FAIL'
is returned from this function a run-time error is generated and a run-time
error window is displayed. Is it possible to trap this error and not display
the window in certain circumstances? The function generating the error is
TX_RunSeqOrTest().
We are running LabWindows 5.0 and TestExecutive 2.0.1.
We would appreciate any help.
Joe Colson

You can prevent LabWindows from breaking on library
errors with SetBreakOnLibraryErrrors(). I don't know if
this will work for TestExecutive functions.
Regards,
Reed.
Reed Blake
Beta Technology
Industrial and Scientific Computing
example:
int break_state, status
break_state = SetBreakOnLibraryErrors (0); // Disable break on library
errors
status = GetFileSize (name, &file_size); // Labwindows library
function
SetBreakOnLibraryErrors (break_state); // Restore break state.
Joe Colson wrote in message <[email protected]>...
>
>We have defined a Setup Function in a sequence we are running. When a
'FAIL'
>is returned from this function a run-time error is generated and a run-
time
>error window is displayed. Is it possible to trap this error and not
display
>the window in certain circumstances? The function generating the error is
>TX_RunSeqOrTest().
>We are running LabWindows 5.0 and TestExecutive 2.0.1.
>
>We would appreciate any help.
>
>Joe Colson

Break execution after custom run-time error handler callback

I am using Teststand 2010 SP1 and have written a custom runtime error handler based on the ErrorHandlerExample example that ships with TestStand. It has been implemented as a StationPostStepRuntimeError callback in my Station Callbacks folder. I have modified the example as follows:
(1) Added code to turn off the UUT transmitter if it was on.
(2) Added a call to an executable that sends an email to the currently logged in user.
(3) Calls the standard TestStand run-time error dialog using the Engine DisplayRunTimeErrorDialog method.
(4) Processes the user's selection, then turns on the UUT transmitter for any option other then Abort.
The callback also checks the status of the Break and "Don't Show again for this execution" options selected by the user. If the user selects Break then the only option I can find is to call the API Execution.Break() method which breaks the execution right there in my callback. The user then has to single step there way out of the callback. Is there a way of instructing TestStand to complete the callback execution and break immediately after completing the callback (i.e.at the step following the error)? I've zipped up and attached my modified sequence.
Alternatively, is there a better way of doing this?
Regards,
David
Solved!
Go to Solution.
Attachments:
StationCallbacks.7z ‏13 KB

Didn't have a chance to try it yet but maybe StepOut is your solution?
From the TS Help:
StepOut Method
Syntax
Execution.StepOut
Purpose
Resumes the execution from a suspended state and then suspends the execution again after execution of the current sequence completes.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Run-time error calling TestComplete

Hi,
I have a COM interface setup between TestStand and another software (TestComplete). The two software were working and communicating well together for few month. But yesterday I received an "error occurred calling TestComplete Library- Testcomplete in playing state." Please see attachment.
I have all the test scripts running on a network drive, never had a problem before. What could be the cause of the problem? Any help would be greatly appreciated!
Best Regards,
ph2
Attachments:
run-time error msg.doc ‏38 KB

Hi Ph2,
I hope you are doing well today! As Ray has mentioned, it does seem that this error is being caused due to the current state that your TestComplete software is in when trying to communicate with it. I am not familiar with TestComplete myself, but the specific dialog of the error, "An error occurred calling 'RunRoutineEx' in 'ItcIntegration' of 'TestCompleteLibrary' TestComplete is already in the playing state," sounds like it might be trying to put the TestComplete program in the play state while it is already in this state.
The best bet would be to touch base with Smartbear as this does not look like a TestStand specific error. I hope this helps, Ph2. Have a great day!
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

Run time error for program: RPCALCU0_CE

Hi Abapers,
When we execute the standard program: RPCALCU0_CE from SE38. Below run time error is getting trigerred before selection screen is displayed. Below are the run time error details -
Runtime Error          UNCAUGHT_EXCEPTION
Exception              CX_HRPA_INVALID_PARAMETER
       Occurred on     08/04/2010 at   01:22:17
What happened?
The exception 'CX_HRPA_INVALID_PARAMETER' was raised but was not caught at any
stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_HRPA_RESOLVE_EXCEPTION=====CP', had to
be terminated.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_HRPA_INVALID_PARAMETER',
was neither
caught nor passed along using a RAISING clause, in the procedure
"RESOLVE_EXCEPTION" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Invalid parameter EXCEPTION, value
The occurrence of the exception is closely linked to the occurrence of a
previous exception, "CX_HRPA_VIOLATED_PRECONDITION", which occurred in the
program "CL_HRPA_MASTERDATA_FACTORY====CP" -
specifically in line 6 of the (Include) program
"CL_HRPA_MASTERDATA_FACTORY====CM004".
The reason for the exception was:
Precondition violated
Please suggest the solution to overcome this.

Hey,
    I could not figure your exact problem. But you can go to the transaction ST22 to take a better look at the error that you got. This gives a detailed explanation of the exact error that you are getting. The moment you enter this transaction, you will see the number of runtime errors you got today. Just click on 'Today'. This will give you the list of runtime errors. Click on the relevent error and you can get a much more detailed explanation of the same.
Hope this helps.

VB Run time error '1004' in SEM BPS layout

Hi,
When I run a layout and activate the standard SAP macro, a Visual basic error message " Run Time error '1004' " appears.
This error has been resolved after I made the following settings.
TOOLS --> MACRO --> SECURITY --> Trusted Publishers --> check flag "Trust Access to Visual Basic Project".
Does each user has to make this setting? Isn't there a setting for SAP macros to attach a trusted digital signature that automaticaly takes care of this error w/o having each user make this setting?
I heard, a setting has to be made in Trusted Publishers to accept "SAPAG".
But, I don't see this in Trsuted publishers list.
I don't see this error in Excel 97 but in Excel 2003. How do I know which versions of excel gives this error to educate our users about this error.
Appreciate any help.

Hi anil1121,
Since this is not a vb.net issue, and based on your description, I would recommend you post this issue in
http://social.msdn.microsoft.com/Forums/en-US/home?forum=officegeneral forum to get supports.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to avoid the run time error "java.lang.OutOfMemoryError"

hi
i have written a code to read a txt file ,i used FileReader to read a file . the code is working well for small txt files. but when i tried to read a large file(greater than 2MB), a run time error called "java.lang.OutofMemoryError" appeared .
plz suggest the methods to read txt files of large capacity(greater than 25MB) .if possible give an example.

thanks for ur replies
i am new to java programming .i am a student persuing B.Tech final semester .i got struck in my project while reading a large txt file(greater than 3MB) . i am now giving a part of code that i had used in my project .it working fine with the txt files less than 3MB ,but when i am treing to read a file greater than 3MB , it is displaying a run time error "java.lang.outofmemoryerror"
i have tried using "java -Xmx" ,it is working , but is there any better option ??
here is the part of code:
   FileReader fin;
    al=new ArrayList();
     try
          fin=new FileReader(filename);
     catch(FileNotFoundException e)
       System.out.println("File not foumn");
     return;
while((i=fin.read())!=-1)
       al.add(new Character((char)i));
     fin.close();
     Object obj[]=al.toArray();plz help me
--santosh

C Run Time error on Itunes Software Update. Now I have No ITunes

Running Windows XP. The setup file for ITunes is incorrectly setting something and causing multiple run time errors when I try and run setup or relaunch ITunes.
Is there a way to reload an older version and where do I get it. Or where's the fix for the current ITunes push

Usually, when I get the error message "Problem with Windows Installer Package" and then "QuickTime required", I just go back to using my old version. This time the old version got uninstalled and now I am iTunes-less!
Let's try a standalone QuickTime.msi install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime install.
Does it install properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Run Time error in MIGO Posting

Dear Friends,
While Posting MIGO against a import PO system throws run time error for a particular plant. I have created 2 plants for the same company code. But first plant does not have any problem. Pl help me and let me know what may be the cause and its solution. No conditions maintained for the Vendor. After PO directly user creating MIGO.
Regards,
Ashok

Pl find the Run Time error of Exception while posting. Before posting Document was OK while checking.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          11.01.2011 10:34:16
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Operation QM14 not available for this lot
     Long text of error message:
      Diagnosis
          The desired operation does not fit the inspection lot (object
          type).
      System Response
          The operation is not permitted and can therefore not be carried
          out.
      Procedure
     Technical information about the message:
     Message class....... "QV"
     Number.............. 224
     Variable 1.......... "QM14"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLMBWL
    Include                                 LMBWLU21
    Row                                     62
    Module type                             (FUNCTION)
    Module Name                             MB_POST_GOODS_MOVEMENT
Source Code Extract
Line SourceCde
   32 *    BKPF as well. There is no other way to forward XBLNR to FI as not
   33 *    every document is posted by MB_CREATE -> a new function module in
   34 *    MBWL for transferring the information, called by FI, meant to load
   35 *    the complete function group for all MBxx postings when this isn't
   36 *    required (Performance). Would be the better way to transport the
   37 *    information after switching off MBxx in later release.
   38 *    corresponding IMPORT ... FROM MEMORY ... can be found in
   39 *    AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
   40      l_mem_id = 'MKPF-XBLNR'.                                   " 641365
   41      EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id.             " 641365
   42    ELSE.                                                        "1245374
   43      l_mem_id = 'MKPF-XBLNR'.                                   "1245374
   44      FREE MEMORY ID l_mem_id.                                   "1245374
   45    ENDIF.
   46    IF xmkpf-xabln IS INITIAL.                               "note 434093
   47        CALL FUNCTION 'MB_XAB_NUMBER_GET'.                   "note 434093
   48    ENDIF.                                                   "note 434093
   49
   50 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
   CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
        EXCEPTIONS
          error_message = 4.
As soon as we have started to put things into UPDATE TASK, w
ensure that errors definitely terminate the transaction.
MESSAGE A is not sufficient because it can be catched from
external callers which COMMIT WORK afterwards, resulting in
incomplete updates. Read note 385830 for the full story.
   IF NOT sy-subrc IS INITIAL.
      MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH
                 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    MESSAGE A263.
   ENDIF.
Optische Archivierung
Spaete Erfassung mit Barcode
Redesign of barcode handling -> note 780365
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
                                         xmkpf-mjahr
                                         barcode.
MOVE-CORRESPONDING xmkpf TO emkpf.
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
    EXCEPTIONS
      error_message = 4.
   MOVE-CORRESPONDING xmkpf TO emkpf.
   CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
        EXCEPTIONS
          error_message = 4.
   IF NOT sy-subrc IS INITIAL.
Regards,
Ashok

Run time error in delivery document

          I am doing standard Order To Cash process i will get an run time error in PGI time

Runtime Errors MESSAGE_TYPE_X
Date and Time 18.07.2014 22:41:23
Short dump has not been completely stored (too big)
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     No RFC destination is defined for SAP Global Trade Services
     Long text of error message:
     Technical information about the message:
     Message class....... "/SAPSLL/PLUGINR3"
Number.............. 002
Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLMBWL
    Include                                 LMBWLU21
    Row                                     59
    Module type                             (FUNCTION)
    Module Name MB_POST_GOODS_MOVEMENT
Source Code Extract
Line SourceCde
Source Code Extract
Line SourceCde
   29 *    when a goods movement for an inbound or outbound delivery is posted
   30 *    directly from VL31N/ VL01N, XBLNR is not yet known when we call
   31 *    CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
   32 *    BKPF as well. There is no other way to forward XBLNR to FI as not
   33 *    every document is posted by MB_CREATE -> a new function module in
   34 *    MBWL for transferring the information, called by FI, meant to load
   35 *    the complete function group for all MBxx postings when this isn't
   36 *    required (Performance). Would be the better way to transport the
   37 *    information after switching off MBxx in later release.
   38 *    corresponding IMPORT ... FROM MEMORY ... can be found in
   39 *    AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
   40      l_mem_id = 'MKPF-XBLNR'.                                   " 641365
   41      EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id.             " 641365
   42    ENDIF.
   43    IF xmkpf-xabln IS INITIAL.                               "note 434093
   44        CALL FUNCTION 'MB_XAB_NUMBER_GET'.                   "note 434093
   45    ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50    CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51         EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58    IF NOT sy-subrc IS INITIAL.
>>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 *     MESSAGE A263.
62    ENDIF.
63 * Optische Archivierung
64 * Spaete Erfassung mit Barcode
65 * Redesign of barcode handling -> note 780365
66   PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67 xmkpf-mjahr
68                                          barcode.
69
70 MOVE-CORRESPONDING xmkpf TO emkpf.
71   CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72     EXCEPTIONS
73       error_message = 4.
74 MOVE-CORRESPONDING xmkpf TO emkpf.
75    CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76         EXCEPTIONS
77           error_message = 4.
78    IF NOT sy-subrc IS INITIAL.

Run time error when loading external dimensions in Dev Studio

Hi,
I'm getting a run-time error when I try to load externally managed dimensions in Dev Studio using "Discover" button. The dimensions appear in the state folder so they got loaded fine but not sure why they are not being loaded into dev studio.

Your question relates to the Endeca Commerce product(s), and would be better asked in this forum: Technical Questions .

[iPhone beta 6] run time error

Similar Messages

Maybe you are looking for