Iphone Email Setup - Microsoft Exchange Server

We have an exchange server and as a result having a little problem getting my email acct setup so I can "send" and "reply" to email... I can now receive email but cannot send/respond..
My IT dept is looking into it and asked me...
If you could find out if that device (IPhone)has a fixed IP address then we can get this resolved pretty quickly.
Suggestions please...
Tom Porter

I've also found sending email via an Exchange server to be problematic (intermittent but mostly not sending). I've laid it to the server I'm using, but this thing is still young. Some other sites also have reported Exchange issues.
Some reports have said Apple is going to address this issue in an update, but since many people were wrong about Exchange support in the first place, I'm biding my time.

Similar Messages

Using iPhone with a Microsoft Exchange Server

Hi
Is it possible to connect the iphone to a Microsoft Exchange Server to access your emails?
Thanks

Ryan Simmons,
Exchange's ActiveSync protocol which requires licensing a propietary protocol from Microsoft is what you are asking for.
IMAP is one additional port open, and can be encrypted with SSL. If they are concerned about an additional port open, VPN is an option. Then only when the VPN is active will the corporate email be available. The other argument that has been advanced on security is on Windows Mobile devices the server can ask for remote wipes of data from the phone. The iPhone only caches emails, and goes back to the server to download them again when you go to view them again. If you change the password for the account on the server, the same results occur - the email is not available on the device the next time that account is accessed from the iPhone.
This article contains an outline of the things needed on the server to support:
http://docs.info.apple.com/article.html?artnum=307313
This article outlines the VPN protocols supported by the iPhone:
http://docs.info.apple.com/article.html?artnum=305723
Hope this helps,
Nathan C.

How to read emails from Microsoft Exchange Server

I have microsoft exchange server and I want to read emails from microsoft exchange server. There is no POP3 server. So is it possible?
If it is possible to read emails from microsoft exchange server then please give me some idea.
Thanks
Santanu

santanu wrote:
Hi,
My company is using Microsoft exchange server.
IMPA and POP3 has been disabled, but my requirement is I wan to read email.Then ask the administrator of the server to enable IMAP. If you have a valid business requirement to do that, there would be no reason for the administrator to refuse.

How to configure email through microsoft exchange server

Curve 8520 with vodafone

Instructions
1 Click the “Full Menu” button located to the immediate left of the trackball.
2 Click the “Settings” icon in the Full Menu.
3 Click the “Setup Wizard” icon on the Settings page.
4 Click the “Email Setup” link in the Setup Wizard.
5 Select the first radio button labeled “I want to create or add an email address.”
6 Click the “Next” button twice.
7 Type the email address for the account on the Microsoft Exchange Server in the first input box.
8 Type the email account password provided by the email administrator.
9 Click the “Next” link. The device will attempt to access the email account on the Exchange Server and download items. If connection is successful, the email account has been successfully added to the Blackberry.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Email Problem- Microsoft Exchange Server

I have been trying to setup my two email accounts on the Tour from Microsoft Outlook. I got one email to work correctly on the Tour, it was a POP3 email. However, my main email is on the Exchange Server and for some reason the Blackberry is not receiving those emails. I have tried everything I could in Outlook (2003) to fix it, called my service provided, and IT. Please if anyone could help give me some advice on how to setup the email for an Exchange Server (NOT POP3), I would much appreciate it!!!

Hi,
This is from Sgardne:
KB02858 Unable to integrate a Microsoft Outlook Web Access or IBM Lotus Domino Web Access account with a BlackBerry Internet Service account.
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Can LabVIEW send an email through Microsoft Exchange server without an account set up in Outlook?

I've found sample code that shows how to send email through Outlook using LabVIEW. On any computer I log into on our network, my profile loads and I have access to the exchange server through Outlook so the code works.
However, I am developing a program that will run on a lab computer with a generic PC login that is shared among everyone in the lab. Exchange server/outlook is not set up for the generic user.
Is it possible to have labVIEW send an email through the exchange server with a server name, username, and password coded into the executable?

You would need to send a standard SMTP message via Exchange. The Exchange server will likely require authentication, so you won't be able to use the built-in SMTP VIs, as they do not support authentication. If you're on Windows you can use .NET (see this example), or use the OpenG SMTP VIs.

Setup microsoft exchange server

Hi All,
I am using iPhone4 and would like to setup a Microsoft Exchange mail account to check my compan's mail. I have done all the setting by looking at the outlook settings on my laptop. But somehow it still doesn't work.
Below are the configuration details in the Microsoft Outlook:
1. Server name for account: xxxx.company.com
2. URL to connect the proxy server: https://xxxx.company.com
3. outlook is connecting using HTTP server.
Thanks.

I've only set up one gmail account on an iPhone for a friend of mine. I did it via the Exchange option and I always assumed it worked in the same way as all other mailboxes. When I have an attachment sent to me and I want to pass it on I chose 'Forward' and select 'Include Attachments'. I'm not sure when you simply reply it will include them.
Hope that helps.

How do I do to read more than 200 emails of Microsoft Exchange Server ?

Dear All,
I need to read lots exchange emails more than 200 in iPhone.
Could tell me how I can do?
Best Regards.
Pike.Chiang

If there are more than 200 messages in a mailbox, there is or should be a load more messages selection available at the bottom of the mailbox to load more messages that are available on the server.

Setting up Email to Microsoft exchange server

I need help setting up my email to my server. I can access my mail though the web by using mail.exchange.com, but when I try to set it up for my BB it will not recognize it. What do I need to tell my IT person to do to make it work?
Message Edited by juan1158 on 06-02-2008 03:22 PM

Your company will need to have the BES (Blackberry Enterprise Service) software installed on their servers. Point your IT person to the following link:
http://na.blackberry.com/eng/services/server/exchange
If your company doesn't have the budget for it, you can set up a forwarding rule to a blackberry email that you create using BIS and then modify that entry to have a reply-to setting that points to your work email address.

Readinjg mail from Microsoft Exchange Server

Hi,
I neeed java code to read emails from Microsoft Exchange Server.Can somone please share the code.
Thanks in Advance
Rama

Thank you very much for the reply.
I tried to write the code .At one place I am getting the below error.
DEBUG POP3: server doesn't support TOP, disabling it
Exception in thread "main" java.lang.NoClassDefFoundError: javax/activation/DataSource
     at com.sun.mail.pop3.POP3Folder.createMessage(POP3Folder.java:333)
     at com.sun.mail.pop3.POP3Folder.getMessage(POP3Folder.java:314)
     at javax.mail.Folder.getUnreadMessageCount(Folder.java:761)
     at InboxReaderIMAPLast10.main(InboxReaderIMAPLast10.java:41)
Pls help me in fiding the reason
Rama

IPhone 6 setup in Microsoft Exchange Server

Currently there is one cell phone in our office set-up on the
Microsoft Exchange Server. It can receive e-mails but cannot always send e-mails from the cell phone. Recently, we tried setting-up an iPhone
6 with the Microsoft Exchange Server and it can send an e-mail from the iPhone; but cannot receive e-mails on the iPhone. Also, the e-mails sent from the iPhone, do not show-up on the user's desktop. Please
help.<o:p></o:p>

Regarding the one that can't send, what happens when they try?
Regarding the one that doesn't show up in the desktop machine, what client is in use on the desktop machine, what version and service pack, and how is it configured to connect?
And what version, service pack and rollup or cumulative update is installed on the Exchange server?
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Iphone and Microsoft Exchange server 2007.

We as a corporate company have many iphone users, and the iphone users are configured with our corporate microsoft exchange 2007 server. So the users use their iphones to check their corporate emails which is on microsoft exchange 2007. So they have setup a connection on their iphones to the company exchange server.
The issue we have is that the iphone users have issues with sending out email via the exchange email accounts on their iphones, when they send large emails, or emails with a long chains, When they send these emails the emails gets stuck in the outbox, and does not send out. The users then have to delete the content in the email, or make the email less in size and then it sends OK.
We have checked our exchange server and the settings seem ok, and we have contacted microsoft, and they have done some tests with a windows mobile emulator which acts like a mobile device, and there are no issues with sending email their. So they have asked me to contact Apple about any issues.
So has anyone come across this issue. Any suggestions.

Try this:
1. On your Exchange server that runs your active sync or outlook web access, open IIS
2. Right click on the website that contains exchange components and choose properties.
3. Select the "Directory Security" tab
4. Under "Secure Communications", click the "Edit" button
5. Under "Client Certificates", select "Ignore Client Certificates"
6. *IMPORTANT STEP: When you click ok and ok again, it may ask you whether you want to change other subfolders within the main container with the modifications you have just made, dont select any of these subfolders, just click OK. It is only the main properties you need to change. Those that need to inherit, should already inherit properly. If you select other subfolders to change with the modifications you have just made, it will likely ruin your active directory setup as some subfolders need different security settings to others.

Can I get more than one account on iphone microsoft exchange server

Hi all,
I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
any workaround to the one email account per iphone policy??

Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

Connection to the server failed appears when synching email through Microsoft Exchange.

The message, 'Connection to the server failed', appears when synching Groupwise email through Microsoft Exchange on my IPhone 4S. A long string of numbers and letters appears where INBOX should be. The downloading 'wheel' keeps spinning, and the battery is drained quickly as a result. I also get numerous no sender emails with the date 12/31/69 that cannot be deleted. Calendars also are not synching.The exact same settings work for my IPad2. The server works for other IPhone users. It is very strange and frustrating.

What device does your husband have? What email server does he use?
All I can tell you is what Microsoft is saying right now.
If any other email systems (like gmail, yahoo) work on your device, odds are that your device is fine.

1st Generation iPhone-Microsoft Exchange Server

Hi-
I have a first generation iPhone and want to use the Microsoft Exchange Server to download my work email and calendar. I have tried several times going through the process of entering email address, log in, password, domain, and sever. Each time I get an error message that says 'exchange account verification failed'. I have walked through this with 2 other people on their 3G iPhones and it works perfectly. Am I having trouble with this because I'm using the 1st Generation iPhone? Any assistance or troubleshooting with this would be awesome!
Thanks!

What version of the iPhone OS are you running? Check Settings > General > About. MS Exchange support is not available on pre-v2.0 versions. Original iPhones running v2.x are able to connect to MS Exchange servers (assuming the server is set to allow that access, which in your case since other iPhones are accessing it, it seems to be).

Iphone Email Setup - Microsoft Exchange Server

Similar Messages

Maybe you are looking for