IPhone how to layout controls with a setFrame resize

In the interface builder there are various settings for "Mode" under "View" category.
I have a UIScrollView with 5 controls on it like so:
[UIButton1] [UIButton2]
[UITableView1]
[UIButton3][UiButton4]
What I would like to be able to do is to adjust the UIScrollView size, and have the contents lay out properly with the top buttons at the top, bottom buttons at the bottom, and the table view sizing to take up the middle.
I just can't find a decent explanation of what the various Mode settings do for layout.
The method I am using to adjust the scroll view is:
myScrollView setFrame:CGRectMake(0,0,320,480)
or
myScrollView setFrame:CGRectMake(0,0,320,440)

Your observation is correct, MochaVNC is for local network only
See Teamviewer for remote control across the internet
http://www.teamviewer.com/en/index.aspx

Similar Messages

If I want to run a small business with Iphone, how could I contact with apple company ?

I really want to run a small business with iphone mobile, how could I contact with apple company ? please help me !

http://developer.apple.com/contact/

Conference layout control with EX60/MX200

Hi all, I'm experiencing some difficult controlling conference layout when using MX200 and EX60s. The user guide demonstrates being able to change the conference layout from the touch pad however I can seem to find this function, is it possible some configuration I’m missing on the endpoint / CUCM / MCU?
I’m using TC7.1.4 on the endpoint, CUCM 9.1.2 and a MCU5320.
I’m also experiencing problems when trying to add video calls in conferences using 9951 with the USB camera. Some participant lose video other lose audio.
Any advice would be gratefully received.
Regards,
Rob

If you have it enabled on your MCU, you should be able to adjust the conference layout using FECC or DTMF.
As per the MCU documentation in the "Changing Layout" section:
Press * to show the in call menu
Press 1. My actions
Press 5. Change layout
Press 2 Next layout view or 8. Previous layout view (repeatedly) to cycle through the available layouts until you find the one that is suitable. On this menu you can also select which participant occupies the biggest portion og the display.
Wait for the in call menu to hid itself or press 000 to hide it immediately.
I've just tried it here on a 4220 and a 5320 and it works fine from my EX90.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

How to Control with Maximum Record per Page

Hi Every one
how can I control with maximum record per page with parameter sending from Form
ex.
if I set parameter with value=15 the report will run 15 rows per page ?
Can anyone help me Please ASAP ?
Thankx

PLay around with SRW.SETMAXROW , from memory that should do the trick.
Cheers.
N.

How Use ActiveX Control Item!

Please Let me know how use OCX Control with ActiveX Control Item in forms6i,
and send me Sample code(*.fmb).
Especially, I want to know how handle 'Event' of OCX Control in forms 6i.
When use VBasic, code is descibed in 'Event' of OCX Control, and then how handle 'Event' of OCX Control in forms 6i.
return to mail - [email protected]

I think that if you use an activeX container, property and invoke nodes will work for the document/file or whatever you have in it, so I recommed you to use references to the file you want to use, open an activeX reference in the block diagram, and pass this reference to open, write, save and exit. This can be done easyly using the invoke and property nodes you already know... If not, check for errors between them, sometimes one error makes the rest of the code not to work... Hope this helps.
If you want me to check the program, you can send an example here, but be sure it's LV 5.0, I've nor 5.1 nor 6.0, it can be a way of knowing the problem.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

How to handle multiple selection in the Spark List control with checkbox as itemrenderer?

Hi All,
I am using checkbox as an ItemRenderer in spark list.
I have a query.
how to handle multiple selection in the Spark List control with checkbox as itemrenderer?
how to retrieve the selected item label?
Thank you in advance.

Hi there, I'll tweak your code a little bit to something like this:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                layout="vertical">
    <mx:Script>
        <![CDATA[
             import mx.events.ListEvent;
             import mx.controls.CheckBox;
           [Bindable]
           private var mySelectedIndexes:ArrayCollection=new ArrayCollection();
            private function onChange(e:ListEvent):void
               if(CheckBox(e.itemRenderer).selected){
                         mySelectedIndexes.addItem(e.rowIndex);
               }else{
                              mySelectedIndexes.removeItemAt(mySelectedIndexes.getItemIndex(e.rowIndex));
               chkList.selectedIndices=mySelectedIndexes.toArray();
        ]]>
    </mx:Script>
<mx:ArrayCollection id="collection">
        <mx:Object label="Test A"/>
        <mx:Object label="Test B"/>
        <mx:Object label="Test C"/>
        <mx:Object label="Test D"/>
        <mx:Object label="Test E"/>
        <mx:Object label="Test F"/>
        <mx:Object label="Test G"/>
    </mx:ArrayCollection>
<mx:List id="chkList" dataProvider="{collection}" itemRenderer="mx.controls.CheckBox" itemClick="onChange(event);" allowMultipleSelection="true"/>
</mx:Application>

How can i control background colors with items (registry.dat)

Hello Evry one.....
plzzzzzzzzz help.
how can i control background colors with display items
in registry.dat
like app.ui.requiredFieldvABGCOLOR=255.0.0
how can i control background colors with others items ????
thanks.

The iPhone has a "remote" app that lets you control Keynote on a Mac, but not on another iOS device (iPhone/iPad/iPod Touch).
There are some apps that let you control limited content on another iOS device - but the content has to be within the app. You might check out SyncPad - perhaps you can import the presentation into it and then control it on the iPad.

How can i control quicktime using my iphone

how can i control quicktime using my iphone?
mostly I want the playback speed control that is available to quicktime and the 10 second rewind that is available to the iOS remote app.

Connect iPhone to stereo system with headphone jack connector, very simple.

How Do You Populate A Spark List Control With An Array?

Hello, all,
Sorry to come accross so frustrated, but how in the name of God do you populate a Spark list control with the data in an array? You used to be able to do this with the mx:List control, but the guys developing Flex just had to make things more difficult than they need to be! I am more of a code purist and prefer doing things the way they have been done for decades, but apparently nothing can ever stay simple!
I simply want to populate a list control with an array and this shouldn't be rocket science! I found out that I must use a "collection" element, so I decided that an arrayCollection would be best. However, after searching Adobe's documentation about arrayCollections, I am lost in a black hole of data binding, extra lines of code just to add a new element, the need to sort it, etc...!
Here is my code:
var pendingArray:ArrayCollection = new ArrayCollection();
for ( var i:int = 0 ; i < queue.length ; i++ )
     var item:UserQueueItem = queue[i] as UserQueueItem ;
     if ( item.status == UserQueueItem.STATUS_PENDING )
     pendingArray.addItem({label:item.descriptor.displayName,descriptor:item.descriptor});
Here is the relevant MXML:
<s:VGroup>
     <s:List id="knockingList" width="110" height="100"/>
</s:VGroup>
I'm not getting any errors, but the list is not populating.
I have seen several examples where the arrayCollection is declared and populated in MXML:
        <mx:ArrayCollection id="myAC">
            
            <fx:Array id="myArray">
                <fx:Object label="MI" data="Lansing"/>
                <fx:Object label="MO" data="Jefferson City"/>
                <fx:Object label="MA" data="Boston"/>
                etc...
           </fx:Array>
        </mx:ArrayCollection>
That may be fine for an example, but I think this is a rare situation. Most of the time I would image that the arrayCollection would be created and populated on the fly in ActionScript! How can I do this?
Thanks in advance for any help or advice anyone can give!
Matt

In your post it seemed like you were trying to take care of many considerations at once: optimization, design, architecture. I would suggest you get something up and running and then worry about everything else.
If I use data binding, then I will probably have to declare the arrayCollection as a global variable and then I'll have to write 100 or so extra lines of code to addItem(), removeItem(), sort(), etc... It just seems like too much overhead.
I believe you may have some misconceptions about databinding in general. You won't have to make it a global variable and you certainly won't need an extra 100 lines of code. If you did this forum would be a very , very quiet place.
I don't want to use data binding because the original array is refreshed often and there is one function called by an event that re-declares the arrayCollection each time, populates it with the array, and then sets it as the list's dataprovider.
That is the beauty of the ArrayCollection, it can handle the updates to its source Array. I don't know if you need to redeclare the ArrayCollection, resetting the source to the new Array allows everyone involved to keep their references so you don't have to worry about any "spooky" stuff going on.

How do I backup voice memos from iPhone 4 to my Macbook with iOS 6.0?

How do I backup voice memos from my iPhone 4 to my MacBook, with iOS 6?
I have synchronised them a hundred times but iTunes just doesn't backup my voice memos. And I haven't seen a playlist called "Voice Memos" on the left sidebar either...

Look for Voice Memos under Genres in iTunes.
With the phone connected, click on its name on the left. Then click on the Music tab on the right. Is "Include voice memos" checked?

How do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

I HAVE AN OLD 3G IPHONE , HOW DO I USE IT IN ANOTHER COUNTRY WITH A NEW SIM CARD

I HAVE AN OLD 3G IPHONE , HOW DO I USE IT IN ANOTHER COUNTRY WITH A NEW SIM CARD ?

it has to be unlocked by your carrier. give them a call

I have 3dparty software wirelessly with a cryptographic authentication system without my consent (seems to be new technology developed by stanford) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail break. Now what?

I have 3rd party software wirelessly injected and used on my iphone with a cryptographic authentication system without my consent (seems to be new technology developed by stanford and apple security is not updated for this technology) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail breaking my phone, adding and removing software, changing settings all from a remotely controled device from different location (I have a Mac address I'd of this device to know for sure). Almost undetectable. When I look at the legal section of my phone it shows a list of all the unauthorized 3rd party software "as is" copyright encrypted on the phone. This is the most basic way to legally steal software of any kind. Because of this legalality 3rd party ownership have total control of certain software correlated with hardware use including visualization technology, etc. most people luckily will never have this happen to them so it's unlikely many readers have not a clue of what I'm saying currently. Either way, without needing to obtain specific warranty of any kind "as is" copyright control makes system restores not a solution because the source code is not directly encrypted on the actual hardware device only a copy right notice must appear on the specific device 3rd party software validation making it extremely difficult for me to take control of the situation. Apple claims their iOS technology prevents this type copyright obstruction from being possible, however, according to my phone a new form of technology was used developed by Tom wu of Stanford university called the STANFORD SRP AUTHENTICATION TECHNOLOGY which uses Some form of cryptographic authentication system and uses quote "secure remote password" which seems to suceed in hacking iOS apple technology apple claims is not possible to jailbreak an unstolen phone or without the owners consent As well as loading the device with 3rd party copyright Notices to make all of this legalized. My phone shows atleast 30 pages worth of legalized 3rd party copyright permissions! Yesterday my apple care provider labeled me a jailbreaker and refused to look at my legal documented proof which completely blew my mind because it voides my apple care contract I spent 100 on. This employee did not take all factors into consideration and made quick assumptions as well as verbally speaking to me as I'm an automatic criminal. I left the store yesterday with no payed insurance help on a problem I had no control over and couldn't prevent, leaving with voided contracts. This is an apple users worst nightmare and I have spent days researching all of this like i am some kind of lawyer only to be able to use my phone the way it should and spent alot of money on. I can legally backup any claim I have just wrote above currently and have a large source of data collected to prove apple is wrong in voiding insurance support on this issue. The problem lies in apple avoiding and not wanting to believe their software can legally be obtained ot "hacked". Yet still labeled a jailbreaker basically.. What should I do????? Been to local apple store 3 times and rebooted my phone as well sprint service restore 4 times and spoke with reps twiice on the phone. Spoke with my phone provider who said apple has full control over these matters so they can't help me. My case is according to apple "still open"...Anyone else heard of this or of Stanford's office of technology licensing? Maybe I need to buy a blackberry again or just use a landline so I can stop being my own lawyer and focus on other productive areas in life instead of this horrible mess. I shouldn't have to prove to apple I not a jailbreaker they should have to prove I'm one before voiding support I desperately need!!

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

Can I use, and how can I use voice control with my iPad 2?

Is it possible to use the voice control with my iPad 2? If so, how can I use it? Since there is no siri for iPad yet, I'd like to use something similar to it and I've seen this built in voice control before but I was not sure if it's possible with the iPad.

Not yet, however you can download the new google app. This offers voice seeking on the net.

IPhone how to layout controls with a setFrame resize

Similar Messages

Maybe you are looking for