IPhone Locking Up When App Running

Since I upgraded to 3.1, occasionally my iphone will lock up when I'm running an app. If I have an app open, and the phone goes to sleep, I can't power it back up and have to do a restart pressing power button and home button at the same time. This has happened with different apps, including when playing music.
Anyone else encounter this problem?

Just say the following article on Engadget.com. Guess this is becoming a common problem:
http://www.engadget.com/2009/09/17/poll-has-iphone-os-3-1-screwed-up-your-phone/ #poll34495

Similar Messages

  • IPhone locking up when answering a multi-party call

    My iPhone locks up when I either try to switch over to a 2nd call coming in. I answer the call and the phone number shows but the timer sits at zero and when I hit the home button I get MULTI PARTY CALL and my iPhone locks up. The only way out of it is to turn off my iPhone and turn it back on. I thought it was perhaps a Firmware issue but I have the latest firmwhere and even restored back to factory defaults. I had thought the problem was also when there was too much texts and voicemail and the problem was a memory issue and have cleared out all my texts as well as much of my voicemail. It still have the issue. Does anyone else have the same problem I do trying to put 1 call on hold and answer a 2nd call?
    Thanks!
    Bill

    I have the same problem!
    it's a total crap shoot when you answer a call while you're on one, I know it's not just me a couple of friends are having the same issue... I would love to have this fixed!

  • Office 2013 - Incorrect Icons In Taskbar When Apps Running

    Hi,
    I have a a strange issue relating to Office 2013 (all apps in suite) in our school based Windows 7 domain environment.
    When students login and run any app from the office suite they launch correctly and are able to be used.  However the icon that is displayed in the task bar for say, Word, is not that of Word but is the icon for Database Compare 2013.  Powerpoint
    as another example always displays the Publisher icon.  If you right click the icon the options available also refer to the incorrect app, so instead of an option to bring the Powerpoint app to the forefront it says Publisher.
    The incorrect icon is always the same one for each app whenever launched and is the same for all users.
    We have updated Windows and the Office to the latest patches.  Possibly worth noting that we are running this config on Apple iMacs using bootcamped Windows 7 but I don't personally believe this has any bearing as it's only Office related.I have search
    for instances of this issue and see there is a hotfix for incorrect icons when in a remote session rather than physically logged onto a machine.  I also see references to deleting the icon cache for the user but local user profiles are scrapped on the
    machines here when the student logs off.
    Any help or pointers are greatly appreciated.
    Kind Regards
    Radar.

    I've reviewed screenshot from you initial post on Answer forum.
    http://answers.microsoft.com/en-us/office/forum/office_2013_release-office_install/office-2013-incorrect-icons-in-taskbar-when-apps/ef99ce77-1e88-44c5-8214-c6c69837a9ae
    Since the icon shows fine in local but only incorrect through RDP session, I am thinking this might not be the promblem of Office application self. RDP session might not load the correct icon for Office duo to the file permission or wrong path.
    Better to post your question to forum for Remote Desktop Services (Terminal Services)
    http://social.technet.microsoft.com/Forums/windowsserver/en-us/home?forum=winserverTS
    Thanks for your understanding.
    Tony Chen
    TechNet Community Support

  • Some events are not dispatched when app runs in background

    My Android app has a TIMER event which fires once every second to connect a TCP socket (class flash.net.Socket) and send a request.
    A packet sniffer confirms that a socket is in fact connecting, request is sent, reply comes back and connection is closed, all happening once per second.
    Clearly, even with the app in the background, the TIMER event is occurring every second, because the timer handler is initating every socket.
    But not every closing connection causes a CLOSE event to dispatch, because my close handler is called less frequently.  Sometimes once in 3 seconds, 8 seconds or even longer.
    The CLOSE dispatches correctly once per second when the app is in the foreground.
    Why are CLOSE events being missed when the app is in the background?  What is the difference between a TIMER event and a CLOSE event, causing one to dispatch correctly but not the other?
    Thanks.

    I've narrowed my problem down by chopping pieces of code until it works, and I think I have it narrowed down to the code that uses FlexGraphing but need to check a bit more...
    It's odd that it works in Flex3 builder though, and there are no errors when I run in as AIR. In fact, the app RUNS, since it is in the task manager, but it won't appear.

  • Is there a fix to stop email on a iphone locking up when searching sent items on IOS6

    Is there a fix to stop the email locking up when searching sent items on IO6

    Maybe I am confused on what is happening. Your doing a search in the Spotlight Or in Email?
    What email? icloud, hotmail, yahoo etc.?

  • IPhone locks up when connected to computer (Mac or Windows)

    Hello fellow iPhone owners,
    My iPhone started to have this issue starting yesterday and I am quite baffled atm. When I connect my iPhone to a computer, whether or not it's a Mac or Windows, it begins to charge and behaves normally at first. However, few minutes in, the phone vibrates twice and the loading circle appears dead center in between all the app icons. The loading circle spins, but the entire phone is pretty much locked and in interval of 10-15 seconds the phone will vibrate twice.
    This initially did not allow my Mac to open up iTunes, so I deleted all my podcasts as suggested from the intranet which helped the iTunes issue. Yet, the phone continues to lock up with the loading screen. I also tried doing a hardreset pressing the Lock and Home button multiple times with no avail.
    Any suggestions?
    Thanks!

    Your phone will not appear like an attached hard drive. But it should appear in iTunes. iTunes 10.7 or later and Mac OSX 10.6.8 or later are required.
    Start iTunes on your Mac. If its iTunes 11 use the View menu to View Sidebar. Connect your iPhone. The phone should appear in the sidebar. Select your phone and use the row of tabs in the right side window to make selections.

  • IPhone locks up when using calendar

    I had no problems synching my new iPhone, and apparently all the stuff from my calendar went in properly, because I get reminders when I have an appointment due. However, if I click the calendar icon, nothing shows on the calendar and the iPhone subsequently locks up. If I am patient, the phone apparently reboots itself - an apple shows up on the screen and then all is good again. Any clues on what is happening? I have the latest itunes and upgrades.

    Standard troubleshooting steps in order are power the iPhone off and on, a Reset which is done by pressing and holding the Home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, and a Restore with iTunes with two options - from your iPhone's backup or as a new iPhone or not from your iPhone's backup. A sync is required after either restore option.

  • IPhone locks up when Youtube video is paused and phone goes to sleep mode

    When a youtube video starts playing and i pause it for a bit and let the phone go to sleep , it locks up. I cannot wake the phone up by using any of the normal methods. So I have to reset the iPhone to do anything.
    This behavior is reproducible on my iPhone.
    Anyone else experience this?

    Rehan
    That's definitely a situation you should let Apple know about.
    http://www.apple.com/feedback/iphone.html
    Jim
    PB G3 "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM/ 8GB iPhone   Mac OS X (10.4.10)  

  • IPhone locking up when activating WiFi

    Hello.
    Each and everytime I join a wireless access point of any kind, my iPhone completely locks up and I have to force a reset. I have done the software restore through iTunes, and it has not fixed the issue. WiFi has always worked on this phone, but lasat night it became unresponsive.
    Is there any fix to this, or do I have a lemon?

    I have the same problem!
    it's a total crap shoot when you answer a call while you're on one, I know it's not just me a couple of friends are having the same issue... I would love to have this fixed!

  • DasyLab. Modules, Black Box, Navigator frame doesn't appear when app runs

    Hello,
    I have version 11 or DasyLab and am running Windows 7 Pro.  When I launch DasyLab (as an Administrator) the Modules, Black Box and Navigaor frame briefly appears as long as the splash screen is loading DLL's.  Once DLL's are loaded the Modules, Black Box and Navigaor frame goes away.  
    I try pressing ctrl+M but to no avail.
    Can anyone help?
    Thanks,
    Alan Jones
    Vancouver, BC

    If you go to the view menu ... can you enable those panes? 
    If not, try editing the DASYLab.INI Configuration file, and delete the [Panes] section (only that section).
    The INI file is in the Public User Document folder
    C:\Users\Public\Documents\DASYLab\13.0.0\eng
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • Iphone lock bypassed when going through camera

    Has anyone else experienced that your lock on the iphone 4 can be bypassed simply by hitting the camera button, taking a picture, and then selecting the picture in the tool bar on the bottom?  You can then hit the home button, and it will not ask for a lock number at any point in time.

    No, it can not be bypassed this way. Set  the passcode timeout to immediately. You'll see it prompts you every time.  If you have it set longer (1 minute for example) You have to wait a full minute after locking the phone BEFORE it will prompt for a passcode again under any circumstances.

  • Iphone locking up when trying to unlock

    My iphone 3GS is locking up after the screen turns off and I slide to unlock.  Anyone have any suggestions?  Thanks!

    Could try hard reset (holding home and sleep/wake button). Or make a backup on itunes and restore the SW.

  • (Legally) unlocked iphone locks again when in airplane mode

    I unlocked my iphone from O2 and it now has a Vodafone payg sim in it which works fine. However - whenever I put it into airplane mode it says 'different sim inserted' and needs activating in itunes again. Any ideas how I can stop this? Matt

    I've got the same problem; any time my iPhone is put into flight mode, or if I power it off fully, or if I let the battery drain completely, it needs to be reactivated via iTunes. Inconvenient at home, makes the thing pretty much useless if I'm travelling abroad. I'm using a T-Mobile contract SIM, so it's not Vodaphone, or the fact it's PAYG.

  • Iphone locks up when delete email

    What can I do? I have one reoccuring email no subjet just a date 12-31-00. I don't know is this a virus.

    First try to reset your phone (hold down the home and sleep/wake buttons until the Apple logo comes up)
    If that does not work delete your e-mail account then add it back.

  • I am unable to unlock my iPhone 4. When I swipe to unlock, a woman's voice comes on and says "screen locked." I am running IOS 7.1

    When I try to swipe to unlock my iPhone 4, I am unable to do so. A woman's voice comes on saying: "screen locked." I am running IOS 7.1 What could be causing this problem, please and how can I resolve it?

    Tap on the "slide to unlock" text, and after you hear the voice, double tap the text. If you have a passcode, tap the letter, wait for the voice, and double tap the letter. Repeat for each letter.
    Then go to Settings > General > Accessibility > VoiceOver OFF. You may also be able to turn it off by triple pressing the home button.

Maybe you are looking for

  • Low Res Games

    I looked at some of the games in the ovistore, and i was suprised that the quality of the graphics is so low why is it that nokia is behind in many things, but mainly games

  • How do you do to update a profile?

    Hi People: I am newbie and I need your help for this problem. I have a table with a PK with 2 fields. I create the profile and derived this PK. I modified this PK with 3 fields and when I syncronized the profile again this PK no modified. I need know

  • Spool not generated for some conditions

    <b>Requirement :</b>Developing a data transfer program. Approach used is Call Transaction in S mode. In some cases(if Receiving Storage Location is PKGX) I need to load only MB11 and other cases I need to load 3 transaction sequentially – MB11 create

  • Combining multi photos into one?

    I have taken several shots of a rally car going through a corner with a wide angle and would like to show the different positions of the car in the corner in one photo. the max to combine is 4 into 1

  • Migration to new IMAC from old IMAC with a Backup Drive

    I purchased an new IMAC and have an old IMAC and have migrated all of my stuff from old to new, except I have a external backup drive on the old IMAC and did not migrate it. I thought that I would migrate by attaching it to the new but do not have th