IPhone no longer works with Pioneer AVIC-D3 car stereo after recent update

I've used my first gen iPhone with the iPod adapter/cable from my Pioneer AVIC-D3 since I first got it - and it's worked great. But after the recent update it doesn't work. I only get an "Error-11" message on the stereo screen when I plug the phone in. Anyone? This is really frustrating!
Thanks.

Nevermind. Did a hard reset of each and they work now. Odd...

Similar Messages

Connection errors with Pioneer AVH P3100DVD Car Stereo after iOS4.1 Update

I just upgraded to iOS 4.1 and now my Pioneer AVH P3100DVD car stereo has a "skipping" problem like a record or CD with a scratch in it when connected to my iPhone 4.
I've tried disconnecting the USB cable, restarting both my iPhone 4 as well as my car stereo - nothing seems to work. Think of it as watching a streaming video having buffering issues, you hear about a half second of audio, then it drops out, then another half second of audio, drop out, etc.
Plugged in my Classic iPod which still works fine so I know it's not the stereo unit or the cable connection. Has to be something caused by the new software upgrade?
Worked flawlessly with my iPhone 4 up until installing the upgrade yesterday and now haven't been able to find a remedy to the problem. It's as if the stereo keeps dropping the connection every half second.
Anyone out there with the same problem and found a remedy?

LOL...I am happy that I am not the only person to have this problem.
Here is my thread.
http://discussions.apple.com/thread.jspa?threadID=2574519&tstart=0
I too have the same problem with the same Stereo. Except...I have had this problem once before on iOS 4.0.1 When I received my phone new from the factory, it had 4.0.1 on it. It had this problem with my 3100DVD radio too. However when I did a restore on my phone, it fixed it up to a point. I could listen to Pandora without any skips. My ipod would only work without skips if I setup the radio to give the IPOD controls.
Ever since I "Upgraded" to 4.1 it skips on my stereo no matter what I do. I haven't had a chance to do a restore yet. When I do one, I hope that it will work again.

My iPhone no longer works with my wi-fi network. It detects the network but can't communicate, even though it did so until today for months.

My iPhone no longer works with my wi-fi network. It detects the network but is unable to communicate, even though until today it worked great for months. The network is Verizon FiOS Internet on an M1424WR router. PCs and iPad continue to work with the same network without any problem. Any ideas?

have you upgraded to the new ios5 software? if so that could be the issue and contact apple.

Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car

Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car 'm using Win 8

Hi,
How did you set up your email on your Ipnone? Please refer to the article below and try the method to set up your email:
http://office.microsoft.com/en-in/office365-suite-help/set-up-email-on-apple-iphone-ipad-and-ipod-touch-HA102818554.aspx
Do you use Outlook desktop app? If you are talking about a question related to Office 365 web app, it's better to post your question to the Office 365 forum. You will
get the most qualified pool of respondents there:
http://community.office365.com/en-us/forums/default.aspx
If you means that the problem is with your Outlook desktop app, please try to log on your OWA and check if the problem persists there.
Please let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

My iPhone no longer works with external speakers

Since upgrading to the 3.0 software, my iPhone (the original 2G model) no longer works with the speakers I have, or with my DVD/surround system. Previously it worked fine! Has anyone else experienced this. I'm so disappointed, as I use the speakers/surround system a lot to listen to music.
If anyone could help, I'd greatly appreciate it

OK, I just clicked restore to backup in itunes and after restoring the iphone, it seems to be connecting and working through the speakers now. Whew!

Can Itouch be charged and fully functional with Pioneer AVIC-Z3 auto stereo

I am considering getting the Pioneer AVIC-Z3 navigation/stereo Head in my car. I am told that the Pioneer unit will not charge an Itouch that has higher than version 1.15 because of charging voltages/pin changes. I was also told that a Scosche Passport will not solve this problem with the Pioneer systems.
1- Pioneer reps told me that if my Itouch has version 1.15 it will charge and have full functionality with the Pioneer Z3 as that was when the Z3 was designed for. My Itouch has version 2.2 I believe. Can I "downdate" to version 1.15 and how?
Anyone have any experience and advice with this matter. This may be a deal breaker.
Thank you.
Don

Pioneer reps told me that if my Itouch has version 1.15
It's NOT the software version you are running that counts! First generation touches support both FireWire and USB charging; Second generation touches charge only with USB.
The allowable FireWire voltage range is something like 8 volts to 36 volts so auto charger manufactures didn't have to do anything to use the 12 volts a car has.
Second generation touch charging support requires the manufacturers add a regulated power supply to furnish the USB 5.0 volts.

Sync iCloud-enabled iPhone no longer works with iTunes

Both my wife's and my iPhone 4 and iPhone 4S stopped syncing with iTunes soon after the switch to iCLoud and iOS 5.0.1.
Both phones are setup to backup into iCLoud and to sync via WiFi to the inhouse iTunes.
At some point iTunes decided that both devices are no longer linked with our Computer (iMac 27 OSX 10.7.2) and insists whenever it 'sees' the iPhones on WiFi or the local cable that either devive has to be initialized or restored from the latest local backup (which is outdated due to the iCloud backups).
No way to syn music, videos, movies to any of the devices ever since.
Anybody else having the same issues with iTunes 'forgetting' previously paired iPhones?

That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
I have a 3GS and a Pioneer deck in the truck.

IPhone won't work well with Pioneer DEH-5900IB Car Stereo

I have installed Pioneer DEH-5900IB recently and have connected my iPhone (firmware ver. 1.1.1) to this car stereo through Pioneer CD-I200 (interface cable for iPod). Then the iphone certainly asked me whether I want to switch to the airplane mode, and I said no. The music played immediately, HOWEVER the iphone could not charge (i.e. no lightening symbol), as well as 5900IB showed the message "error a0" with no playlist showing up. I could still change the song by using the navigation button (i.e. by clicking the wheel left or right side) though. Is there any possible solution to this problem?
I don't really want to connect the iphone to this car stereo via AUX, since the sound quality it could provide was obviously inferior to the direct connection through CD-I200.
Any suggestion, idea or even rumor on this will be really appreciated.
Thanks!
- SW

Hey swkim... I just spent an hour outside fiddling around with the iPhone/Pioneer and I think I may have found a temporary workaround... let me know if this works for you!:
With the car ignition on, and no iPhone attached to the CDi200 cord, for this first time only (to get out of the 'Error-A0' rut) reset the Pioneer reciever (on mine it involves pushing that small indentation with a pen on the front of the receiver). Hard-Poweroff your iPhone (holding the top button until the red slider comes up to power off the iphone and go ahead and turn the iphone off). The receiver should be on in its reset mode (ie. demo mode or whatever). Now, plug in the CDi200 cord into the powered-off iPhone. It should activate the iPhone. Don't press any buttons - just let it power up by itself. In 100% of the cases i've tried this way, the Pioneer Receiver will switch to the iPod state and stay in the Ready functional mode until the iphone fully boots up, and then it will start to play, charge and work normally without the dreaded error-A0!
Now - the trick to getting this to work each subsequent time without having to reset the receiver each time (because if we have to reset the receiver each time it would be pointless - our tuner settings are gone, possibly BTooth settings gone if your receiver has that option, etc):
When you're ready to stop the car or turn off the ignition, do so. Feel free to detach the faceplate, etc if necessary. the Iphone in the cases I tried were still attached to the CD-i200 cord as I turned off the machine. After the receiver powered off, I unhooked the CD-i200 cord from the iPhone. When I was ready to start it up again, I first turned on the ignition, hooked on the receiver faceplate, and allowed it to boot up (no need to 'reset' the receiver). The trick is though that I made sure the iPhone is now hard-powered off again before attaching it to the CD-i200 cord. Now, attach the powered-off iPhone to the cord. it will cause it to turn on and boot up again... but now (in 100% of the times I've tried so far), the receiver will now see it in its Ready state and will work!
Anyways, let me know if this works for you. If this does, it would suggest that the problem may be with how an iPhone left powered-on tells the receiver where to resume playing a song. The upside of this workaround is that it doesn't require a reset of the receiver each time (thankfully) and, while connected in a working state (ie. non error-A0 state), it also survives Source changes so one is free to change to the TUner mode, etc, and back to the ipod source. The downside though is that one has to hard-power off the iPhone each time before connecting it to the receiver (annoying but not a biggy for me as long as this works), and instead of resuming from the spot in the song last played, it starts from track1 since the iPhone was reset (also not a big deal for me). The other downside I found is that, if the order sequence of the above workaround is changed and I end up with an 'error-A0' message, then I have to go back and reset the receiver (annoying since I'd lose my Tuner settings, ?possibly my Equalizer settings, and ?possibly my BTooth device settings on my DEH-7900BT)...

IPhone no longer works with car charger

I bought this car charger and it worked for months, and when I got back from a road trip I got the latest iPhone OS update and now the phone tells me that "Charging is not supported with this accessory."

Did the charger include the "made for iPhone" certification when purchased including for the 3GS?
Your iPod Classic can be charged via USB or Firewire. The original iPhone can be charged via USB or Firewire, but the FireWire pins were removed from the iPhone's dock connector after the original iPhone which is also the same with all iPod models now. If your car charger charges via FireWire, this wouldn't work with the 3GS regardless. If a 3rd party device does not include the "made for iPhone" certification, this doesn't mean it won't work with the iPhone but having the certification ensures it - unless the device has failed.
If there were something wrong with your iPhone, it wouldn't be charging when connected to your computer or to the wall charger either.
If the charger includes the "made for iPhone" certification, contact the manufacturer. If not, purchase one that does.

IPhone 3G works with Alpine iDA-X200 car stereo

I just wanted to drop a quick note letting folks know that my iPhone 3G works flawlessly with my new Alpine iDA-X200 car stereo. Charging and playing music from the iPhone's iPod work well. As an added bonus I can also play Pandora music through my car speakers with the system. I do get the "This is not a supported accessory do you want to enable Airplane mode?" question but I answer "No" and haven't had a problem.
In case anyone is in the market for a new car stereo to work with their iPhone 3g I recommend the Alpine iDA-X100 or X200 head units.

So I went to the store where I bought my Alpine iDA-X200 and explained what was going on. They seemed to think that is was a problem with all X200s and not just the unit I got - they've had a number of problems with stereos hooked up to iPods and even more so with iPhones.
Well, after playing my iPhone 3G on a demo iDA-X200 for 18 minutes it began to drop out the audio. They were going to call Alpine in the morning and see if they had any advice but before that I plugged in my iPhone 3G into their demo iDA-X100 and let it play. After 35 minutes on the X100 it hadn't missed a beat so I paid the difference and swapped out for the X100. So far I'm pleased but we'll see how things go over the next couple of days - I and hopeful but have my fingers crossed.

Spell bound no longer works with nightly build.It did up ontill last update with max version altered.

I have been using spell bound add on for years and have been updating the max version.After the last update for nightly yesterdday it no longer working.I'm getting error.
Any ideas how to get it to work.

Here's the error I'm getting.
[Exception... "Component returned failure code: 0x80004003 (NS_ERROR_INVALID_POINTER) [nsIEditorSpellCheck.GetNextMisspelledWord]" nsresult: "0x80004003 (NS_ERROR_INVALID_POINTER)" location: "JS frame :: chrome://spellbound/content/spellbound.js :: <TOP_LEVEL> :: line 633" data: no]

Why is my iPod touch not working with my car stereo after the update?

I updated to iOS 6 and now my iPod will not play when I plug into my car stereo with the USB port and cable. I am very frustrated!

You can try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
However, sometime an iOS update breaks compatibility. If that is the case you will have to wait for either the car manufacturer or Apple to issue a an update to correct the problem.

IPhone no longer works with car audio

I'm running a 16 GB 3G-S and it worked wonderfully for my internet music such as Pandora or listening to iHeart radio.
The unit would sync up easily to both my new car audio systems and everything detected and played beautifully! However, once I upgraded to 4.2.1 the iPhone is no longer detected in "iPod Mode" or either receiver. I either get error codes from the receiver or errors from the iPhone that this is not supported (when it was in 4.1).
I really loved those features for my frequent long drives. I really hope there is a fix for this problem. I did check with both receiver manufacturers and they maintain their units should work.
Any thoughts or help is greatly appreciated!

That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
I have a 3GS and a Pioneer deck in the truck.

IPhone No Longer Works with JBL Onstage III

Is anyone experiencing a similar issue after upgrading your iPhone 1st generation to 2.1? Now, when I pop my phone into the JBL Onstage III, it gives me the prompt that it's not a compatible device, and would I like to put it in airport mode. It's also not charging all the time, and seems to take a few second to even recognize it's plugged in.
Is it my phone, or is the JBL speaker system dying on me?
Thanks,
Chris

That is wild! My receiver had problems under 4.1, and I upgraded to 4.2 last night hoping to rectify things. It worked for me, flies through the menus and plays back beautifully again.
I have a 3GS and a Pioneer deck in the truck.

"Import GPS from iPhone" no longer working with iPhone 4 & 4S

Hi-
Since upgrading to the Iphone 4, the Import GPS from Iphone function has ceased to work. The phone appears on the import screen, and photos can be imported sucesfully (and the GPS data is embedded correctly on the photo), but when you go to the places window and go to the import gps from iphone function, the window opens like it's trying to bring up the photos but nothing appears.
This bug continues with the 4S. This function worked fine with my Iphone 3.
Has anyone found a work around for this? I'm surprised this bug has yet to be fixed.
Thanks
Matt

I have the same problem the screen is show something like this:
And never stops and show any photo.
In other way i want to use it to create an slideshow that scroll the map showing the photos, it is possible?
An update soon to fix this problem...
Thanks...

IPhone no longer works with Pioneer AVIC-D3 car stereo after recent update

Similar Messages

Maybe you are looking for