IPhone Sync with Exchange 2003 not syncing calendar

Hi all,
Hopefully someone can help me here. I have a couple of iPhone 3GS' which have been set up to work with an Exchange 2003 server. We can get email & contacts to sync but calendar will not. Any ideas?
Ants.

Potentially calendar corruption.

Similar Messages

  • Calendar Notes - Bidirectional Sync with Exchange 2003 not working

    I have Exchange 2003. Active sync works but when I change notes field in an appointment from the iPhone, it does not sync that change to Exchange server. I have an appointment on the iphone with notes, but I cannot see the notes I created from the iPhone on my Outlook connected to my Exchange server. Works fine with Exchange 2007 but not with 2003. Anyone else noticed this?

    the new iphone does not sink with outlook 2003 and my sync with mac
    is far far less than perfect (300 out of 2500 contacts sync). The iphone techs tell me this problem is universal. I sure didn't get this information when I bought the phone. The apple techs for cannot fix these problems. The software seems flawed.
    <Edited by Moderator>

  • Sync iPhone 3Gs with Outlook 2003 Notes doesn't work?

    Up till March 2010, Syncing Notes form Outlook 2003 worked but now it doesn't. If I create a Note on the iPhone, it doesn't show up in Outlook after a Sync. If I update a Note on iPhone or Outlook 2003, the update doesn't appear on the other device. I have tried checking the box to replace Notes on the iPhone from this computer with the next Sync, but it nevr replacing the Notes on iPhone from Outlook 2003.
    I need help with this please.

    Talk to your IT department. It sounds like either you have the wrong server information (i.e. you have the server name/address that is valid internally, but not a publicly accessibly name/address) OR they do not have the proper ports open on the firewall for active sync to work when you are off the network. 
    I'm assuming you're using a company WiFi network while in the office. If you temporarily turn off WiFi in the office, so the phone reverts to 3G, you should be able to replicate the problem for them.

  • Any ideas for how to sync to Exchange 2003 - contacts and calendar

    Hi
    I am still searching for a mechanism to give me the sync solution I want, which is as follows:
    At work I have a PC running Outlook 2003 via an Exchange Server 2003 setup.
    At home I have an iMac running Snow Leopard
    In the middle I have an iPhone 3G
    I want to sync Calendar and Contacts across all three machines.
    I want to sync work email between the Exchange server and the iphone, but do NOT need this to sync on my iMac at home
    That's it.
    At the moment I can sync email, calendars and contacts successfully between the Exchange server and iPhone, using the over-the-air Exchange Sync on the iPhone. But sadly my iMac will not sync contacts and calendars to the exchange server 2003 as Snow Leopard only supports exchange 2007.
    Ironically (because I don't need this bit to work) I have managed to get my iMac to sync with my Exchange server EMAIL, by selecting the Exchange IMAP option when setting up the mail account on my iMac (as opposed to the Exchange 2007 option). However, I cannot get iCal or Address book to sync with Exchange 2003, regardless of the options I select when setting up the new accounts in Address book or iCal. I guess these just do not work with Exchange 2003
    I know that I cannot use mobileme as a solution, as you cannot have two over-the-air syncs going on, and I need to maintain my iphone link to the exchange server via activesync
    I also know that using itunes to sync via the cable will not work, as this creates separate contacts and calendar files on the iphone and so does not provide the syncing solution I seek.
    I have tried using google to act as the middle man between my iMac and Exchange server data - getting the iMac to sync to Google Calandar and Google Address Book, and then using a third party piece of software called gsyncit to sync from google to the .ost outlook file on my PC workstation. This works some of the time, but keeps crashing and leaving me with multiple duplicates to have to sort out - much too much hard work on a regular basis.
    So I still do not have a solution. Unfortunately upgrading to Exchange server 2007 is not a solution.....
    Any new ideas out there
    Thanks

    I don't think there will be a solution to this. Exchange 2003 just isn't supported.

  • Syncing my iphone 3gs with exchange server 2007.  Is there a way to delete from iphone, without it deleting from my outlook ?

    syncing my iphone 3gs with exchange server 2007.  Is there a way to delete from iphone, without it deleting from my outlook ?

    iCloud does not sync which apps are installed on each device. Deleting an app off of one device has no effect on the others.

  • How do I sync my iPhone 4s with Outlook 2010 NOTES?

    How do I sync my iPhone 4s with Outlook 2010 NOTES?
    NOT using iCloud-- using cable sync between iPhone and Dell computer. Contacts and calendar and music all working, but Notes not working.

    Hello, Skagit46. 
    Thank you for visiting Apple Support Communities. 
    Here are the steps on how to sync your iOS device with Outlook using iTunes. 
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12317
    Cheers,
    Jason H. 

  • Hi, trying to sync/connect my iPhone 6 with my /mac, not charging or coming up in iTunes/iphoto..... Any suggestions??

    Hi, trying to sync/connect my iPhone 6 with my /mac, not charging or coming up in iTunes/iphoto..... Any suggestions??

    Howdy Bdormedy,
    The article linked below details a number of troubleshooting steps that can help get your Mac and your iPhone to work together.
    If you don't see your connected device in iTunes for Mac
    https://support.apple.com/en-us/HT203979
    Regards,
    Allen

  • The recent software update on my HTC One has caused errors with Exchange ActiveSync issues. Calendar, mail and tasks sync fine but contacts won't sync. How do you correct this?

    The recent software update on my HTC One has caused errors with Exchange ActiveSync issues. Calendar, mail and tasks sync fine but contacts won't sync. How do you correct this?

    I had the same problem.  Here is what worked for me.  Open the mail app and delete your exchange account (Settings > Delete Account).  Then re-add your Exchange account.  After this my Exchange contacts showed up again. 

  • Require Passcode Immediately with Exchange 2003 and iPhone 3.0?

    Before I upgraded to iPhone 3.0 I was syncing with Exchange 2003 SP2 and I had set my passcode to be required after 1 hour, which was changed from the default of 4 hours. On the Exchange server we have a policy in place to have a max of 12 hours before a passcode is required which works on my WM phones.
    After upgrading to 3.0, the phone now immediately requires a passcode every time I turn it on. I went into the settings to change it to be a little longer, but the only option is to have it Immediately and I have lost all of the other options. Is there a way to get back at least 1 hour or something that reflects the 12 hour setting on my Exchange server?

    I can confirm that you just need to turn OFF Mail, Contacts and Calendar sync within the Exchange account, set the timeout 4 hours (or whatever - it will automatically shrink down if your Exchaange administrator's policy is more restrictive), and then turn back ON Mail, Contacts and Calendar sync.
    Note you'll get a scary warning that says all your Contacts and Calendar data will be deleted from the phone - Outlook users can ignore if you're syncing with Outlook, since it will re-sync when done.

  • Outlook 2013 not compatible with Exchange 2003

    Hello
    Some of my customers bought SBS 2003 R2 just before SBS 2008 was released so they have systems which are only 4+ years old. SBS 2003 came with Exchange 2003 pre-installed. Outlook 2013 does not support Exchange 2003. So they cannot upgrade their Outlook
    clients to 2013 version.
    Microsoft, is this correct?!

    If this post is hard to read, it's because of Dragonsoft!!  (sometimes it is like auto-correct on the phone - "I said WHAT!??")
    Overall I think this is the most interesting thread that I have ever read on Microsoft.com.
    As a computer for professional for over 30 years, I've always followed the context that software products are designed for a three to five-year term, to have more is a luxury.
    When I was first in the industry (1983), Microsoft had a tendency to change the software versions every year to two years. As we approached the era of Windows XP there was an expected lifetime use of three years. Every two years a new product would appear.
    So, when windows XP lasted well beyond the three-year term, it was pretty exciting to not have to spend money on new product, and we all enjoyed the decade of Windows XP.
    The new generation of IT professionals has somehow believe that software products should live more than five years, and it just blows my mind!
    The reason that I make this post, is because I've used SBS ever since Back Office Server 4.5, and the versions of small business server (now called Small Business Server) have always appeared on the market 1 to 3 years after the primary versions of
    Windows for which they are named.  So I always felt that there was a disadvantage to using small business server in that the products appearing inside of SBS had been on the market for a few years before being incorporated into the SBS package. It
    made me feel, at first, that Microsoft was waiting on the level of maturity within the product before creating the SBS package. Now that I look back on the whole process it made me think that the SBS team had some difficulty merging the products into a install
    package which could handle the intricacies of the licensing limitations on the SBS system.
    SBS 2003 was a great tool when it came out, but I found that it was riddled with security holes. To say the least some of my first SBS 2003 servers had their exchange system hacked by outside influences. (These were external facing servers who had websites
    and exchange server running with public domain names, even though there were firewalls!) After a few patches, DNS modifications, reverse DNS entries, and some changes in the exchange system, I was finally able to make the system secure and solid.
    My first real nightmare with SBS was when upgrading to SBS 2003 R2, which, yes, appeared around 2005. You cannot simply upgrade a machine from SBS to a new version.  You must purchase a new server, install the new SBS version, and migrate your
    entire installation to this new host. (While running SBS 2003 for several years and making backups on a tape, I realized that the new hardware on the market would not support a restore from my tape backup!)  The whole process is rather daunting as not
    all of the detailed steps to upgrade work as expected. I had to call, and pay, Microsoft to complete the process because exchange had trouble during the migration.
    So off we went with our new installation of SBS 2003 R2.  Then along came SBS 2008!  I went through the same steps again... new hardware, new software, and, yes, paid Microsoft, again, for support to migrate.
    When SBS 2011 appeared on the scene I was willing to upgrade again. Having gone through this, twice now, I  fully prepared the client to purchase a new system and to purchase the new software. But because I was faced with the whole entire
    nightmare of new hardware, migration, and having to call Microsoft to complete the process, I decided on a new approach. This time we were going to buy server which would run VMware.  (I was not going to get stuck in a hardware box that I could not replace
    if I ever needed to restore the operating system due to a massive failure.)  So off I went, purchasing a new box, installing VMware, and installing my favorite operating system, Microsoft SBS!
    Well, to say the least, it wasn't exactly as exciting as I had expected. Had some trouble getting VMware to settle into the new hardware, as there seemed to be some compatibility issues, but was able to work it out. Eventually, I was able to get started
    on the migration. Things went well up until the point that I got to the exchange migration, and ran into a similar problem as before! A call to Microsoft revealed that it was even a little daunting for the support personnel, but as I documented the things
    that they modified, and even performed a little cleanup, after they performed their cleanup!  I can happily say that I'm no longer worried about hardware issues, when it comes to restoring my SBS server in case of a failure!
    Overall I'm pleased with having used Microsoft SBS solutions over the past 10 years, but I would never expect, nor would I lead my customer to expect, that a product should last 10 years!
    Previous comments have indicated that server should last seven years because they can be depreciated that way, I believe that to be entirely false!  I live in Texas, and the state of Texas DIR program has adopted standards which state that
    you should replace your hardware every five years! State agencies have this as a requirement, and it is not optional!  Many state agencies have gone to leasing their equipment, which is a three-year term. (Where do you think off-lease equipment comes
    from, anyway?)
    One of my primary clients looked at me one day, and directly ask, "Okay, if we spend the $10,000 on the new server and software, how long should it last?"
    Obviously, I wanted to say, "Forever!" But, remembering something that my mother had said (always plan for the worst and you always come out on top!), I said back to them, "I believe we should plan for a three-year lifespan, and if we get
    any more than that, it will be a luxury." Needless to say, there have been some upgrades which lasted well more than three years, but there have been some which have been spot on.
    The SBS server is a huge savings over purchasing the individual products separately. But there have always been some drawbacks during the upgrade process which makes the entire feasibility of the installation top-heavy when it comes to support costs. 
    I have noticed is that the SBS servers require more labor to keep them running smooth, especially with backup procedures and backup software, as SBS always requires a third-party product to make a "real" (restorable) backup.
    A client's expectations should be that you are taking care of their business without them having to worry about what takes place in the tech room. They understand, and realize, that they can pay you a specific amount of money for your support without necessarily
    having to purchase new hardware. But a good, healthy relationship with your client means that they should always be willing to upgrade, whether it is a workstation or server.
    If you allow a client to be painted in a corner, then it's not their fault, it's your fault!  Because, they have no idea what the new technology can do, and don't realize what's on the market. It's your job to keep up with what's current and to deliver
    expectations which make them realize that each year has a dollar value attached to it, whether it is spent, or not.
    If you have a client is unwilling to spend money to upgrade their equipment, then there's something else wrong with their business, and you should probably consider that they may not be in business for very long. So don't make it your problem when
    they are unwilling to spend money.  You don't work for free.
    One last, quick example of the conversation that I had with a client who was unwilling to upgrade because things seem to be working so well.  I put it like this, "You pay me to make certain that your business operates in good times and in
    bad. Right now, everything is fine. If your building were to burn, and the only thing we had were the backups, I cannot go out and purchase new hardware and restore your system successfully.  The equipment that we have operating here is no longer
    available on the market.  If I were to find the equipment, it would be out-of-date, and most likely, used, and I cannot guarantee its compatibility or functionality. So, if I can't restore your system to an operational status, then what would you do?
    I don't believe there are any number of man-hours you can use to recover the information lost. You would probably have to go out of business! If your business becomes my business, then I would try to move to a position where my data is safe and my business
    can continue in the case of catastrophe. The only way I can do this, is to purchase new hardware, new software, and put you back in a position of compatibility with the market. One of the things I always try to do is keep your business operations at a point
    where if I die, someone else can come in and take my place. The whole idea here is to keep your business going."
    It didn't take them long to come back and surprise me, "Make a list of what you need. Don't give us a list of what we need to get by, tell us what we need to be productive for several years.  We don't want to patch this together
    and always have problems."
    And just as a note, your customer can write off $10,000+ per year for new equipment purchases.  I think the number may be higher now. I had one customer who purchased a $15,000 system in December and wrote off $10,000 in one year and the other $5000,
    a month later, in the next year!

  • Installing a Windows 2012 Domain Controller into a 2000/2003 domain with Exchange 2003

    Hello,
        I have a client that we are planning to migrate to 2012 over time.  They currently have a Windows 200 DC and 2 member servers running Windows 2003, one of which is running Exchange 2003.
        We first are going to introduce a 2012 server into the domain and my plan was to DCPromo the 2003 server that isn't running Exchange and raise domain level to 2003 and then demote the 2000 server.  I was then going to install the
    2012 server into the domain and make it a backup Domain Controller for the time being and leave the newly promoted Windows 2003 server as the primary Domain Controller with all the roles and global catalog.  My question is will Exchange 2003 still function
    normally in this scenario?
       I've been doing research and read some things about Exchange 2003 not working with 2012 Domain Controllers, but I was thinking if the 2003 is still the primary, it might work.  We will eventually migrate to 2003, they just don't want to
    do it all at once, due to costs and other issues.
    Thanks.

    I didn't ask if it was supported, I just wanted to know if Exchange 2003 would continue
    to function if the Windows 2003 DC still held all the FSMO roles and Global Catalog.
    A not supported situation means that it is a situation where Microsoft made no testing or do not guarantee that you can operate with no problems. Following a not supported scenario could be done but is on your own risk.
    If it won't, can the 2012 server be a member server in the 2003 AD?  The 2000
    DC it is replacing, just shares files on the network in addition to being the lone AD server
    Yes, it can be a member server.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Will Microsoft Exchange2000 Portlet work with Exchange 2003

    Hi All,
    Has anyone tried using Microsoft Exchange2000 Portlet with Exchange 2003 ? Or is there any Portlet available for Exchange 2003 ?
    Thanks in Advance.
    Dipak

    I'm facing problem with Exchange 2003 portlet which is not working with all users. it's working good only with the one user. I mean it doesn't allow the other users to put there user name & Password .
    Please help me with this portlet or is there other portlet for exchange 2003
    Thanks
    Waleed

  • How can i transfer my calendar on my iphone to my PC? I have downloaded icloud and itunes. My contacts on my iphone have been transferred but not my calendar.

    how can i transfer my calendar on my iphone to my PC? I have downloaded icloud and itunes. My contacts on my iphone have been transferred but not my calendar.

    Did you fail to maintain a backup copy?
    If so, then you can buy a third party program to extract the music not purchased from itunes.
    Itunes purchases can be transferred to your computer:  File>Transfer Purchases.

  • HI there my iphone 4s with no audio not ringing nothing to hear

    HI there my iphone 4s with no audio not ringing nothing to hear

    Did you update to the latest iTunes version 11.1 first?
    I haven't heard of an issue where the iOS update was not seen by iTunes or the phone. I assume you have tried restarting your phone, and then if that doesn't work try holding down the Sleep/Wake switch and the Home button until the phone shuts off, then restaring and trying the update.
    You may need help from Apple. Are you near an Apple Store?

  • IPhone 3G won't sync calendar with Exchange 2003

    Hi - can't see this exact problem elsewhere hence the post...
    I have iPhone 3G syncing with OWA from Exchange 2003 just fine with mail and contacts. Calendar is totally blank though. If I create a new appointment on iPhone then it shows up in Exchange - great! If I do it the other way round then I get nothing on iPhone - unless I invite myself in which case it does! But then if I delete the email invitation then the entry disappears. I could live with that (just about) but not but being able to sync my calendar history is a big problem for me.
    By the way I can't sync my calendar history via iTunes to Outlook because the sync component crashes!
    Can anyone shed any light?

    Hi man, I got the same problem with my iPhone, but it has been solved..
    First, You need the Outlook 2003 or 2007 only, if you have a earlier version of this it isn't work.
    Second, You sould need to create a new PST file whit the Outlook Version 2003 or 2007, the file format must be on Unicode Format, no Outlook (97-2000) format, with this file format the import of calendar doesn't gonna be work.
    Third, You now have a PST whit Outlook 2003 or 2007 Version, you need to manually put your events on the calendar, Why? Cause if you just move it on the new calendar it gonna create and old instance of the event not a new instance, That's why iTunes doesn´t sync the calendar.
    I done all these and actually I can sync the calendar with my iphone.

Maybe you are looking for