Iphone won't connect after installing latest itunes

After installing the latest version of iTunes and plugging in my iphone I received the error message "Iphone cannot be used because the proper software is not installed." I've already tried removing and re-installing the program. Not sure what else I can try to get this working. I'm running windows vista.

Hi Neodoc,
Welcome to the Apple Support Communities! I understand that your MacBook Pro will not boot past the Apple logo. There may be a few troubleshooting steps I would recommend for this situation. The following article outlines the steps to perform to get this resolved for you.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
I hope this helps,
-Joe

Similar Messages

Computer won't boot after installing latest iTunes update

Won't boot after the apple screen. Turns black and disk stops Help! Was running Mavericks.

Hi Neodoc,
Welcome to the Apple Support Communities! I understand that your MacBook Pro will not boot past the Apple logo. There may be a few troubleshooting steps I would recommend for this situation. The following article outlines the steps to perform to get this resolved for you.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
I hope this helps,
-Joe

Problems to sync my computer calendar with my Iphone after installing latest Itunes download

problems to sync my computer calendar with my Iphone after installing latest Itunes download

When I connect my Iphone to the computer Ai have to sync automatically my outlook calendar. Never had any issues except with the latest download that tell is doing some sync over the air with ICloud and that I can go to my Iphone and change that. So far I have not been able to sync my Iphone calendar with my outlook calendar for tge whole week

HT1386 after installing latest itune software,my ipod and outlook in my computer are not showing any calender items prier to one month

After installing latest itune software in my computer, my ipod and outlook in my computer are not showing any calender items i added befor
22nd december.Also not syncing with outlook, any calender items i have added in my ipod after 22nd january.I have selected all events to sync
in my ipod.

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

After installing latest itunes on new PC unable to login to my account in iTunes Store

Hi all,
I get a new PC and wanted to use it with my apple devices.
System is Windows 7 64 bit and, after installing latest iTunes I am not able to login to iTunes (needed to authorize my new PC and use it with my devices)
Always get the message that iTunes Store is not available at the moment.
For instance, I tried the diagnosys tool inside itunes and everything is ok.
Please help me...
Clemente

There are a number of things you could do. One would be to network the two computers and transfer your iTunes folder from one to another. Here are a few links that may help you out:
New PC & moving iTunes library
Copying songs over a network to use with iTunes for Windows
iTunes: Copying music between authorised computers with iTunes for Windows
Another way would be to use an external hard drive, the guide for using the iPod as a hard drive is a good starting point. Apart from the sections on initially setting up the iPod, the instructions are the same for copying the iTunes folder to an actual external drive. If you substitute "external hard drive" for "iPod" the process is the same: How to use your iPod to move your music to a new computer

After installing latest iTunes I began having R6034 error messages, found and tried fox of removing 5 Apple programs and reinstalling iTunes. Now iTunes says my library cannot be accessed because it was created with a newer version of iTunes. HELP!

After installing latest iTunes, I began getting R6034 Runtime Error messages, found fix of removing 5 Apple programs, reboot and reinstall iTunes. Seemed to work but now getting error message that my iTunes Library (iTunes Library.itl) cannot be read because it was created with a newer version of iTunes. Need Help!!!

Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

Help, cd reader won't read cds after installing latest itunes upgrade.

Just inserted a music cd (non-pirated) into my macbook but it keeps getting auto-ejected. Tried this with several music cds. This issue only cropped up AFTER installing the latest iTunes update on 11 June 2011.

Hi, and welcome to Apple Support Communities.
You could try going to System Preferences > Accounts and create a new account to see if the problem also occurs in a new account. If so, it would point to a hardware problem with the optical drive.

HT1926 Problems synchronizing iPod touch after installing latest iTunes update

After having installed the latest iTunes update I can't sync my iPod touch with iTunes anymore. Error message reads: Attempting to copy to the disk "Acer" failed. The device is not connected." I already re-installed iTunes completely. Another error message says: "iTunes could not back up the iPod because the iPod is disconnected". But the iPod was connected. What can I do?

Temporarily disable any security software on the computer.

PC completely crashed after installing latest iTunes update-coincidence?

I downloaded and installed the latest iTunes upgrade yesterday. After doing so it asked me to restart my PC which I did. However, my PC would not then start, I get a black screen with the message:- "windows could not start because the following file is missing or corrupt - \windows\system32\config\system "
I have tried rebooting from the "last known good configuration" in "safe mode" and have also tried restoring the system with the cdrom that came with the PC.
Is this problem connected to the iTunes download or is it just a coincidence that my PC has crashed immediately after this?? It seems very starnge as I have never had any problems like this before. I am now using my work laptop to post this message as my home PC seems to be completely kaput.
Has anyone any advice or has anyone suffered the same problem?

This error is often due to a corrupted registry. I am afraid I can not help you myself, but this Miscrosoft article seems to cover it:
http://support.microsoft.com/kb/307545
If you google: missing corrupt \windows\system32\config\system
you will find quite a few other hits about the problem.
PS I noticed that the Microsoft method does not aply if you have an OEM installed Windows:
+Warning Do not use the procedure that is described in this article if your computer has an OEM-installed operating system. The system hive on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log back into the recovery console to restore the original registry hives.+
Message was edited by: polydorus

IPhone won't sync after installing Leopard

Hi,
This weekend I updated my Mac Mini's system to 10.5.5 from 10.4.11 and I discovered that my iPhone won't sync now. I do get the little bleep sound when I plug it in and it will charge, but it won't sync. I have tried rebooting both the Mac Mini and the iPhone, but to no avail. Any thoughts or suggestions?
Thanks much,
David

1) Try re-installing iTunes
2) Try removing and reinstalling AMDS: http://support.apple.com/kb/HT1747

TS1967 Having trouble after installing latest iTunes

I have tried to install the latest itunes on windows xp, but keep getting this answer when I try to run it "This application has failed to start because dbghelp.dll was found. iTunes was not installed correctly. reinstall iTunes. Error 7 (Window 126)"

Sorry about that, this should read as,
I have tried to install the latest itunes on windows xp, but keep getting this answer when I try to run it "This application has failed to start because dbghelp.dll was not found. iTunes was not installed correctly. reinstall iTunes. Error 7 (Window 126)"
Many thanks for your input
Talking ainz

Problems after installing latest itunes

I installed the latest itunes 9.0.1 the other day, since then my ipod nano ,3rd gen, wont sync, a message comes up when you plug it in saying 'new hardware found, there was a problem with installation and may not load properly' then continues to do nothing. when i plug in my sisters ipod 6ogb 5th gen on her itunes it says 'ipod service module (32 bit) has encountered a problem and needs to close'.
tried resetting the ipods but that didnt helpnot a computer wizz so need help in simple terms please!!

(default) REG_SZ (VALUE NOT SET)
APPLE APPLICATION REG_SZ =JJ*5.q6R9m~e?-X$O^7!5sPG*i7c9a%EIdQdnl&dib_....
CRT-winSXS REG_SZ _i0Y]s!soe8MkbIdFwUv$f.Z@}4G(*9MkbIdFwUv$f.Z....
Good job, Natters. On doing the same search through my own registry I find the same results and my Device manager *isn't* blank. So I'm not so inclined to think it's the SP3 problem anymore. Again.
So the other thing that I would be worried about is a malware infection. *Apropos* adware can cause a blank Device Manager, although other similar varieties may also cause similar problems.
In order to get that possibility off the table, I think you should try heading to a reputable Malware removal help forum where somewhere can have a good look through a HiJackThis log of your PC, and can advise you how to fix any problems that show up. There's a list of reputable malware help forums at the bottom of the following page (although there are others out there):
http://www.doxdesk.com/parasite/links.html
(Not trying to get rid of you, just trying to get you on the radar screens of people with the right set of skills.)

Iphone won't show up in itunes after installing latest itunes update

I just installed the latest version of iTunes. Now it won't recognize my iPhone 4. It shows up as a camera on my computer (Windows XP Pro) but no matter what I do, I can't get iTunes to see the iPhone. Any ideas?
thanks.

I'm not that familiar with Windows, but can you create another User account and run your Nexus Service software from there?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

IMac G4 won't boot after install of iTunes latest update

I just updated my iTunes software via download. I have the iMac configured to ID when new updates are available. After download I selected the "restart" option. Computer shut off and upon power up will not proceed past blue start up screen with the progress bar and "starting MAC OSX...." text. I have tried power down/power up. It has been at least an hour and still on blue screen. I have never had a problem in 5 years. Any ideas?

Hi Dean, and a warm welcome to the forums!
Unbeknownst to you, you had problems on your HD before the update.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
http://docs.info.apple.com/article.html?artnum=107120

IMac won't boot after install of itunes 7.6 with ipod connected

Just an FYI for anyone that comes across this issue. If you do, just disconnect your
ipod and the system will boot up.

Hi Dean, and a warm welcome to the forums!
Unbeknownst to you, you had problems on your HD before the update.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
http://docs.info.apple.com/article.html?artnum=107120

Iphone won't connect after installing latest itunes

Similar Messages

Maybe you are looking for