Iphone3g and navigation

I have been considering a small navigation type unit for use when using my motorcycle. while discussing this with a best buy sales person he suggested a iphone as a solution (good for him)... he had one and thought the navigation system was great... I have no experience with iphones... but my need relative to a nav system on the bike is to find out where I am and where I need to go... really do not need to look at it while driving... that would be asking for trouble... anyone have experience with the iphone navigation or gps system or thoughts on this matter... if so look forward to it.

The iPhone initially was connected to a USB hub so I connected it directly to the computer, no change. I reloaded iTunes, no change. I am running Parallels so I suspended it and the Device iPhone popped up in iTunes. I then started Parallels and Device and iPhone disappeared. So it appears Parallels is the culprit. Is this unique to my computer or to everyone running Parallels? Is there a setting I have wrong?
The iPhone still will not work when plugged into the powered hub so it is plugged into the iMac for now.

Similar Messages

HT204053 i am having iphone3gs and ipod4s, is it possible the application that i have purchased in my iphone can be available in my i pod by doing payment only one time for the same application in my i phone...if yes,plz let me know hw it is possible

i am having iphone3gs and ipod4s, is it possible the application that i have purchased in my iphone can be available in my i pod by doing payment only one time for the same application in my i phone...if yes,plz let me know hw it is possible..

Open the App Store on your device.
Make sure you are signed in with the same account used for the original purchase.
Tap on Purchased from the bottom navigation bar.
On iPhone or iPod touch, tap Updates from the bottom navigation bar, then tap Purchased.
Locate the app in your Purchased tab.
Tap the download button (cloud symbol)
See also: http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US

HT4623 I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS

I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS.

http://support.apple.com/kb/he37

Web-building my site. FIREFOX and NAVIGATOR is great but not SAFARI. Why?

Hi,
I am building my web site http://www.philthesecurityguard.com/ everything works great on FIREFOX and NAVIGATOR but not SAFARI. Example: on my web site, I click on REAL LETTERS in SAFARI and HALF of orange squares appears outside of my letters. FIREFOX and NAVIGATOR have FULL orange squares on the outside of my letters. Another example: The vertical thin partitions on my web is red on FIREFOX and NAVIGATOR, but there is no red line on SAFARI. How come SAFARI is "short circuiting?" (I have Adobe GoLive web builder.) [email protected]

> Tim G" <[email protected]> wrote
in message
> news:gha37j$7lg$[email protected]..
> "jus2sho" <[email protected]> wrote in
message
> news:gha2rf$74r$[email protected]..
>> Thierry,
>> Can you elaborate a little on what you said. I'm a
complete noob that
>> knows a
>> little about how to use DW. Will adding the .html
extension fix my
>> problem? I
>> have yet to change it because I don't have access to
Firefox to try out
>> right
>> now. I will in the morning.
>
>
> You absolutely need to have an HTML-compatible
extension. Whether that is
> your only problem... well, fix that, and then see.
Configuring the server would allow the OP to use file names
with no
extension [1], which imho would be a better approach [2].
Cool URIs don't change...
[1]
http://www.w3.org/Provider/Style/URI
[2]
http://www.w3.org/Provider/Style/URI#remove
Thierry | Adobe Community Expert | Articles and Tutorials ::
http://www.TJKDesign.com/go/?0
Spry Widgets |
http://labs.adobe.com/technologies/spry/samples/
[click on
"Widgets"]
Spry Menu Bar samples |
http://labs.adobe.com/technologies/spry/samples/menubar/MenuBarSample.html

Create View without inbound, outbound and navigation link

Please look at this picture:
There are:
+ PanelView
+ View 01
+ View 02
+ EmptyView
In the PanelView, there are two buttons, button01 and button02. When press on button01, it shows View01; when press on button02, it shows View02.
Problem is:
How to do above things without creating inbound, outbound and navigation link.
Thank u a lot.

Dear Mr. Raghunandan Madarikuruva ,
Everything is very easy if there are inbound, outbound, and navigation link.
What happen if there isn't inbound, outbound, and navigation link.
My problem is how to open each childview without inbound, outbound, and navigation link.
How can I do that
Thank you for answer my question.
Thank you again
This is yahoo ID: [email protected]
and Skype ID: doleminhtriet
May I talk to you?
Edited by: krisscage krisscage on Sep 26, 2008 10:53 AM

How can we align TOC and Navigation bar for Captivate 4 Aggregator Project?

Hi,
Is there any way we can align the bottom of TOC and Navigation bar of Captivate 4 Aggregator project. Or can we give a background color so that they don't look like different entities.
Thanks,
Janhavi

I had this issue too. What I discovered was that some of the slides in one of my presentations were off the screen. Some because I had dropped pictures onto a blank slide, and others because I switched background images on recorded slides and didn't merge the images into the existing background. After fixing those issues and republishing, I put the revised .swf into the aggregator and it worked.

Line Item Dimension and Navigational attribute

Hi Gurus,
Can somebody tell me how line item Dimensions and navigational attributes works technically?
What are the pros and cons for them?
Regards
Alex

Hi Alex,
You will use navigational attributes based on how you want to track and report history. Let me explain with an example.
Customer Bubba is assigned Sales Group XYZ in Jan 2007. In July the Sales Group on the Customer Master record is changed to ABC. Your are looking at the sales report.
1). If you want to see all the sales made to Customer Bubba at the time of reporting (current) then you will use navigational attributes You will create 0SALESGRP as the navigational attribute of 0CUSTOMER . Then all sales to the customer will show up under Sales Group ABC.
2). If you want to see all the sales made to the customer at the time the actual transaction occured then you will add Sales Group as a characteristic of the InfoCube. Then sales from Jan - June 2007 will show under Sales Group XYZ and from July - Present will show under Sales Group ABC.
Performance issue occurs because navigational attribute is stored outside of the dimension table of the cube and is stored in separate master data tables. So query has to perform additional table read. So essentially there are advantages and disadvantages of usng navigational attributes. It is business requirement that will drive the use of navigational attribute.
Hope this helps!!!. Please assign points.

Pages and Navigation Pages

What's the difference between Pages and Navigation Pages? Can I change a Page to Navigation Page? If yes, how?
Thanks a lot.

The basic problem is that the default page only applies when you haven't yet accessed the book. Once you have accessed it , the last accessed page within the book is what gets displayed. (if the page label specified is the books).
as before, you either must implement your logic in a backing file or you must generate the url to the book correctly (by having the page label of the page you want active) i.e. if your book has a pagelabel b1 and your pages have labels p1 and p2 and you always want b1 to goto p2 (the default) , then whenever you want to generate a URL to the book you must use P2 as the label (whether it is custom menu or anywhere else in your site).
The reason the first option is preferable because the logic lives with your book's backing file, in the second case it is spread out (even if you use a helper)
regards
deepak

How to identify display and navigational attributes in report?

To all of thanks to be in SDN, plz send tue clarifications.....?
Q. How to identify display and navigational attributes in report? is there any naming convension differences for both of them?

This works fine for "powerusers", but for informational users you have to create your own naming conventions for all navigational attributes which are not unique. For example 0COUNTRY may be a navigational attribute of 0CUSTOMER, OSOLD-TO, 0SHIP-TO, 0BILLTOPRTY, 0PAYER. To make the text clear for your users in reports name it CS Country, SO Country, SH Country, BT country, ... as 0COUNTRY could also be a characteristic from the document.
This means quiet some work especially if you have a multilingual installation, but the information users will be very thankful.
hope this helps
mich

Mandatory Fields and Navigation Buttons

Hi
I have a search form where I search by number, then I have the choice to update and submit the request. All fields are required for submission. The problems is that when I have empty fields I cannot use the search and navigation buttons, I tried to set Immediate to true but then the buttons would not perform their action. How can I solve this?
Your help would be appreciated

Hi,
immediate works in the combination with response complete. However, because you are omitting the model update you will have to do this manually in an action method or action listener
Frank

Combined logo and navigation bar

Is it considered to be poor layout to combine the company
logo and navigation bar in the same image? I have created this
image in Fireworks 8 as a jpeg to keep the gradients looking good
for both the logo and navbar, but am not sure if it makes the page
load any slower by having them in the same image? I do have
rollover buttons on the navbar so I do have to export it as
‘HTML and images’ w/slices. I do find it easier to
setup in Dreamweaver if they are together but could separate them
with some extra work. Any suggestions? Thanks for your help.

Navigation in an image? What - are you using hotspots?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Alex Mariño" <[email protected]> wrote in
message
news:erv068$hon$[email protected]..
> The bottom line is - how big are your images. If adding
the logo does not
> increase the file size significantly then all is well.
>
> alex
>
> P-C-Surgeonz wrote:
>> Is it considered to be poor layout to combine the
company logo and
>> navigation bar in the same image? I have created
this image in Fireworks
>> 8 as a jpeg to keep the gradients looking good for
both the logo and
>> navbar, but am not sure if it makes the page load
any slower by having
>> them in the same image? I do have rollover buttons
on the navbar so I do
>> have to export it as ?HTML and images? w/slices. I
do find it easier to
>> setup in Dreamweaver if they are together but could
separate them with
>> some extra work. Any suggestions? Thanks for your
help.

What belongs in the faces-config.xml file? Just bean and navigation info?

I am looking for detailed information on the faces-config.xml file.
I've used examples up to this point and I was wondering where the documentation for this configuration file was at.
At this point, I know that bean management and navigation information is in this file, but are there other settings?
Thanks,
--Todd

Pringi: The tag explantion information, why isn't that easily found on Sun's web site or document site?
This has been the most frustrating part - finding pieces of information here and there... and not in one location.
Thanks,
--Todd

How can I permanently save my customized toolbars and navigation button settings? When I run Norton Utilities CleanUp, Firefox gets reset to 'factory'.

I like to clean things out on a regular basis but when I run the Norton Clean-up utility all of my custom toolbar and navigation button settings get reset to 'factory' condition. How can I permanently save these changes to my config or preference settings?

Cookies, Completed Forms, .tmp files are all that's set to be cleared. If I can identify the appropriate elements I can protect them from deletion. Does anyone know?

I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

I have carried out a restore on my iphone3gs and now the screen as frozen, the apple picture is showing and the sun dial timer but it wont do anything

You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

Hello to everyone , i have a iphone3g and i try to upgrade ios high , after a start the reset it show one code error [1015] and now my phone only says to conect to itunes but every time i try to reset it shws me the same error , what should i do ? thanks

hello to everyone , i have a iphone3g and i try to upgrade but now im stuck with the code error 1015 does anyone can help me ? thanks

Error 1015 means the phone has been jailbroken. Per the terms of service, it can not be discussed here.
You're on your own.

Iphone3g and navigation

Similar Messages

Maybe you are looking for