Iphone3G has a black screen. I tried to sync but the screen was still black
Iphone 3G has a black screen. I tried to sync. Any thing else I can do?
Reset the device by pressing and holding the home and power button for 15-20 seconds until the white Apple logo appears.
Similar Messages
-
Trying to sync but the 2 new songs are not adding, syncd ok yesterday
i synced all my songs recently, but bought 2 yesterday but they are not adding. They are ticked, i know i will be almost out of space but i think i have enough left as it is not erroring. The screen on itunes seems to sync successfully i.e no errors, but it does not show e.g. 1 of 2 songs loading.... etc. its as if it just doesnt find any new songs to load.
is the option ticked where it says sync all checked songs
and are both songs ticked -
my iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?
help me ASAP pleaseHello sameen shah,
The following article would be a great place to start for information that can help get your iPhone working again.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
My iphone 4 screen has gone blank but the thone is still on.
My iphone 4 screen has gone blank but the thone is still on.
Hey NJF7,
Thanks for the question. After reviewing your post, it sounds like the screen is black. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
This happened to me when I received a call. My phone started vibrating when it received the incoming call but the screen was black and kept vibrating like as if the call was still coming in, even though my friend hung up. It kept going and going, so I tried holding down the lock button to turn it off but screen was still black/turned off. Hitting home did nothing. My friend said to try holding down the lock button and home button together to reset it. I tried this and yet nothing happened. I am waiting for the battery to drain out and give it a try.
To reset, you have to press both the home and sleep/wake buttons until the Apple logo appears - takes 10-15 seconds.
-
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Passcode has been disabled and the computer it was synced to is no longer working. We have tried to sync to the new computer and it is not possible. Exactly what are the steps to do this. All our apple products are on our account, therefore, apple support should be able to see that there is nothing "suspect" going on. It is driving me insane not being able to reset/resync, whatever it's called when your locked out.
Place the iPod in Recovery mode and connect to the computer and restore via iTunes. The iPod will be erased. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I dropped my Iphone 5 which resulted in it shattering and the screen was still on but it was black with only a white line through it so I couldnt access the phone however I switched over to my Droid and now I cannot send or receive messages and I cant turn off imessage because I cant see anything on the screen. Help?
Then the bottom of the support document states that if you do not have access to the device (which unfortunately because of the screen issue you do not) to contact Apple Care. That is what you need to do.
-
I have a 3GS. The iPod on the phone has made duplicates of some songs. I’ve tried using the “get info” dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes, iTunes is empty but they are still on the phone.
Some Users have reported that a Restore as New has Resolved Issues after the Upgrade...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137 -
My iphone has lost all data when trying to sync with my computor.
I have an pad with most info on, but not keen to sync with that incase that data gets lost!
I joined icloud but cannot retreive from there as its not accepting my icloud account! Help!
If I sync phone with ipad is it likely to work safely to retrieve info as both are apple devices?.ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"
-
Hi I dropped my I phone 5 at the weekend and the screen cracked but the phone still worked. I woke up the next morning to a black screen but the phone is still on ( you can still hear its on ) but just a black screen please help
Unfortunately, it doesn't look like there're any software-related fixes available.
Good luck!
There is a DIY for iPhone 3GS here, but you'll need to do some net searching to find something for iPhone 4. Also remember that this would totally void whatever you have with Apple, so....! -
My email account has frozen and when I go to settings I cannot get to change anything. It has frozen. I have tried re-booting, but it stays frozen. I have two accounts: one is via a proxy server from my work place. I think that is the cause of my problem, bit I cannot get to it to delete or remove it. Can anyone help?
Did you change the email address associed with yur account? If you only changed that, your Apple ID address is not changed. See:
Frequently Asked Questions About Apple ID -
An updated game app has erased itself but App Store still has it as 'Open'. Tried to reinstall but it won't allow me to. Any solutions out there?
Download to your iTunes library and
- First try syncing to the iPod
- Next backup the iPod to iTunes and then restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes -
I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
When watching netflix on appletv is goes black but the sound is still there
When watching netflix on appletv after 5 mins it goes black but the sound is still there and only resumes if I rewind or fast forward and then sometimes just goes back to the home menu
Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.
Maybe you are looking for
-
How to use existing WSP file of reusable workflow and create sanbox solution?
Hello, I have to migrate the SharePoint Designer 2013 workflows from Development environment to Production environment. So, I am following the process which is mentioned in this blog: http://sharepointyankee.com/2010/12/11/options-for-deploying-reusa
-
Problem with swapDepth with press event
Hi guys, Im getting confused with swapDepth for navigation buttons. I have a button mc's that use this for stacking but something weird happens on just the press event. I have tried to take away the press event but the problem makes it more difficult
-
Newbie Question re stacks, import options, & color labels
I probably shouldn't just group together multi-topic questions, but creating a new topic for each one seemed wasteful. I'm just starting to migrate to Lightroom from PSE, so I have a few questions that I couldn't find answers to. 1. Can I change the
-
Hello Experts. While i am creating campaign the partner functions marketing manager should be determined by system. I am using the access sequence CH08 -Organizational Data: Employee of Responsible Organizational Unit. It is using the org determinat
-
Error :Authorization check for caller assignment to J2EE security role whil
Hi Experts, i m working as a portal resource . after the deployment of standered Sap e-rec package . i m getting some error. i have assigned the recruiter role to one test user. Now i m getting two issue: 1)All the services are appearing