Iphone4 doesn´t work properly in 3G mode

My iphone4 doesn´t work properly in 3G mode. Telefon calls break and telefone quality is poor. Internet is mostly not posssible. With 2G both (Telefone, Internet) work. The problem is not that vodafone net is poor because other smartphones work properly at the same location. Telefone calls often break with "no connection" even with 5 sticks. Internet speed is mostly poor, i.E, slower than 2G. It is definitly not a net problem. I think (not sure) the problems occures wit IOs 4.3.3

Thanks for your help Jeffrey,
But
- I checked with several USB audio devices, from different providers. The issue is the same.
- I checked with several applications (Winamp, MediaPlayer, ...). Same issue.
- I checked these devices with different laptops (tried 3 different models) : I have NO PROBLEM.
- The USB devices I use do not need external power supply. I tried EDIROL UA-25 which works perfectly in any case, but not with my TOSHIBA M40.
- I agree that some application can disturb audio management. But in that case, I would like to know which one from the standard installation is the cause, so that I can fire it. It's anyway curious to see that switching from ACPI to Standard mode fixes the issue, as all applications are still there. I would say the applications are not the issue, then.
- All Microsoft updates have already been installed
- I think I tried everything that could be done by closing applications, changing power management modes, system cache, ...
- I have no other hardware device connected/installed (printer or whatever)
- RECORD works perfectly. So if some application layer was disturbing, I would bet it would bother in Play and Record as well.
CONCLUSION : Unless someone can prove it (and I'm ready for some testing), I still believe there's a harware/driver layer that is faulty in the Toshiba management.
And I don't need to contact the manufacturer, as I AM one of them :)
If you are part of the Toshiba support, let me know. Maybe we can investigate together.
FYI : I had to create a new user ID for this forum as it did not accept the one I created this morning anymore :(
Thanks anyway.

Similar Messages

Satellite M40: USB Audio doesn't work properly in ACPI mode

Hi all,
I just bought a Satellite M40 laptop which purpose will be to be used as a mobile audio system.
For that, USB audio devices are a great solution.
Unfortunately, although it was working properly while recording (sound is perfect with all USB Audio compliant devices I could test), there's an issue in Playback as I got lots of clicks and pops.
After lots of tryings and google searches, I fixed the problem by switching from ACPI computer to Standard PC mode.
That's a workaround.
But this way, I don't know anymore what's my battery status, and my laptop do not shutdown automatically.
In fact, my laptop is no more managed as a laptop :(
I suspect a very serious issue in one of the Toshiba components management. Especially, I would not surprised to be told that power management leads to some regular short system freeze, and thus the 10ms USB audio buffers fall into underrun.
This would not bother me so much if I was not part of the technical support team of a company that is also launching some new USB audio products that will fail to work properly with laptops.
My question is :
Is there any driver / bios update that gets rid of this issue ?
If someone from the Toshiba technical support wants to handle this issue directly with me, I would be pleased to help him, as I'm concerned professionnaly and personnaly.
Thanks in advance.
[Edited by: admin]

Thanks for your help Jeffrey,
But
- I checked with several USB audio devices, from different providers. The issue is the same.
- I checked with several applications (Winamp, MediaPlayer, ...). Same issue.
- I checked these devices with different laptops (tried 3 different models) : I have NO PROBLEM.
- The USB devices I use do not need external power supply. I tried EDIROL UA-25 which works perfectly in any case, but not with my TOSHIBA M40.
- I agree that some application can disturb audio management. But in that case, I would like to know which one from the standard installation is the cause, so that I can fire it. It's anyway curious to see that switching from ACPI to Standard mode fixes the issue, as all applications are still there. I would say the applications are not the issue, then.
- All Microsoft updates have already been installed
- I think I tried everything that could be done by closing applications, changing power management modes, system cache, ...
- I have no other hardware device connected/installed (printer or whatever)
- RECORD works perfectly. So if some application layer was disturbing, I would bet it would bother in Play and Record as well.
CONCLUSION : Unless someone can prove it (and I'm ready for some testing), I still believe there's a harware/driver layer that is faulty in the Toshiba management.
And I don't need to contact the manufacturer, as I AM one of them :)
If you are part of the Toshiba support, let me know. Maybe we can investigate together.
FYI : I had to create a new user ID for this forum as it did not accept the one I created this morning anymore :(
Thanks anyway.

Firefox from version 3.6 to 11 beta doesn't work properly with gmail

Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Try to force quit the mail app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

Wifi driver doesn't work properly

HI,I've installed W8.1 instead of W7 but Wifi Dosen't work as a reight Way The Wi-Fi works for then depends on the work and then worked for againe
this affects my Job if i download anything,it stop loading continuesly.
I've tried W8 and the same problem but it works truely with w7.
what should i do for making it works truely with W8.1.
Sorry length of e-mail.

vn7571g_user,
Sorry to hear that you are not having the best possible experience with your new notebook. I'd like to try and address a few of your concerns that you have listed and see if there are some things we can resolve for you.
1. Wifi doesn't work properly:
I see that you have posted in a couple other threads (1st, 2nd) regarding wireless issues with this notebook. We can gladly check this unit at the repair depot for you if you are not keen on changing the card out, PM me the following information and I will see what I can do for you:
SNID or serial number
Contact name
Contact number
Email address
Shipping address
Purchase date
2. Wifi doesn't work after switching on and off 'Airplane mode'
If you have already tried to install/update the drivers, it could be a Windows issue. You can attempt a refresh to see if that helps resolve it.
3. Trackpad response is terrible
This notebook uses a precision touchpad possibly, but since it uses Synaptics drivers you have a couple options:
You can change the way that the touchpad works.
It says Windows 7, but you can see if you have this option in the touchpad settings and see if it helps you out.
4. Speakers jar
Do you have the same issue without the Dolby turned on?
5. Num-Lock is 'Off' after every sleep session
Here is a Microsoft article that discusses this feature. You can follow the steps that they list if you would like.
6. Keyboard-backlight setting is 'On' after every sleep session
The backlit keyboard is working as designed. Here is an article with some FAQ about the backlit keyboard to help customers understand its functionality a bit more.
A couple final thoughts:
Did the issue(s) you are having occur before or after Windows updates, sometime a bad installation of an update can cause all sorts of things to happen.
Worst case, you can always try to restore to factory defaults and test all these things before applying updates or installing any applications or programs.

Search in Outlook 2010 with Exchange Server 2010 doesn't work properly

Hi all,
I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
In application syslog/protocol I get this error:
Function 'CISearch::EcGetRowsetAndAccessor' found, content indexing for database 'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
Can anybody help me with this, if its necessary I can give further information :-)
Thomas
Thomas Deinert

Hi,
What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
Download the script
Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
Similar thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
Best Regards.

Since the last update yesterday to firefox 4.0.1 my program "asus security protect manager" doesn't work properly. That means, that the saved keys from several websites not remembered for lock in.

since the last update yesterday to firefox 4.0.1 my program “asus security protect manager” doesn’t work properly. That means, that the saved keys from several websites not remembered for lock in.

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

My Safari doesn't work properly after installing Lion. Don't like it, how can I uninstall? (Cloud not worth it)?

I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac. My Safari doesn't work properly anymore. Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall? Thanks,

Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari.

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran.

HT1923 The sync function on my iPod Touch 3rd generation doesn't work properly. My OS is up to date, but some of my podcasts won't transfer onto the iPod, and it won't delete ones I've already listened to.

The sync function on my 3rd gen iPod Touch doesn't work properly. It won't sync all the podcasts I've downloaded, and it won't delete ones I've listened to and deleted on iTunes.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

Hp laserjet P1006 doesn't work properly

my Hp laserjet P1006 doesn't work properly on my windows 7(64-bit) and whenever I try to print a page the orange light just flashes and then the green light flashes and then it doesn't print at all.I've tryed everyway including reinstalling the software or even turning it off and then turning it on.Pleaseeeee.............help!!!!!!!!!!!

Hello
I understand you are no longer able to print with the P1006 on Win8.1.
Did you uninstall the P1006 first?
If not uninstall and reinstall the printer software again.
Both drivers are the same if you look at the version on the website and should still work with the Win8.1.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Lightroom 5: start button in the presentation module doesn't work properly

Hi. I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.Can you help me please
Regards Eugene

start button in the presentation mudule
Can you clarify?
There is no start button nor a presentation module.
Do you mean the Play button in the Slideshow module?
Which operating system?

Iphone4 doesn´t work properly in 3G mode

Similar Messages

Maybe you are looking for