IPhot Prints Blanks After a Back Up

I have a HP Photosmart C4500 and iPhoto6. Yesterday I copied my library to an external drive to back it up. Strangely now, I can't print photos from iPhoto. The image appears in the print dialog box but the print is blank. Also, in the "Preview" the image is not there and and preview dialog says "Preview of Untitled.pdf" which is blank. I went into my library and deleted the com.apple.iPhoto.plist file, restarted iPhoto and tried again without any luck. Tried a re-boot too.
Any suggestions?
Thanks in advance,
Jeff
Keff

Hi crunchie1967!
I have an article that can provide some information to you regarding this situation:
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/HT1202
Thanks for using the Apple Support Communities!
Cheers,
Braden

Similar Messages

Since Firefox v34, after zooming text on a page Google Search took me to, the Google search page is blank after clicking 'Back' to it. Is this a v34 glitch?

Since Firefox v34, the Google Search results page is blank after, 1) Clicking on a link in a Google Search results page and loading the linked page, 2) Zooming in on the text on the page Google took me to, and then without resetting text zoom, 3) Clicking the Firefox 'Back' arrow to return to the Google search results. If at that point I either reload the Google results page, or click back a page and then forward again, the full search results are then displayed again.
This happens on my Windows 7 PC as well as my Vista Notebook. Is this a glitch with text zooming and Google in Firefox version 34?

'''>>Type about:preferences#advanced<Enter> in the address bar.<'''
Setting that made no difference. I ran 30-40 test searches on Google with that set and Firefox restarted in Safe Mode with all add-ons disabled. The problem persists on the vast majority of searches. However backing up to Google search results after following some links doesn't result in the problem.
For instance when I do a Google search from www.google.com (USA) on [https://www.google.com/?gws_rd=ssl#q=%22Steve+Gibson%22+ "Steve Gibson"] and click the first result, which for me is his Wikipedia page: [http://en.wikipedia.org/wiki/Steve_Gibson_%28computer_programmer%29 "Steve Gibson (computer programmer) - Wikipedia"]. If I hit CTRL/+ a couple times to zoom text after the page loads, and then click Firefox's 'Back" icon, the previous Google search result page will be empty.
However if I click on the 2nd result in Google's search results, which for me is [https://www.grc.com/stevegibson.htm "GRC | Steve Gibson's WebZone:"], I can zoom the text several times and then click back to the Google search results and find them all displayed fine.
But I've been having this problem when backing up to Google search results probably 70-90% of the time since I updated from Firefox v33 to v34.
It's frustrating because Firefox seems to remember the text zoom level for entire domains. So if I zoom on one Wikipedia page, Firefox will display all Wikipedia pages I visit subsequently at that zoom level. I used to love this feature. But it's become a real pain now when I back up to Google.
BTW: If in the 1st example above, I first reset the text zoom level while I'm still on the Steve Gibson Wiki page, all the Google search results are displayed fine after I click Firefox's 'Back" icon. I don't have this problem in Chrome or Opera.

Customized PO report is printing blank after R12 upgrade

We have upgraded from 11.5.9 to R 12.1.3 .The customized PO report works fine in 11i but prints blank in R12.
Kindly help.It is a bit urgent.

I am still having issue....
oracle@ingram bin]$ adconfig.sh contextfile=/data/oracle/db/UATdb/11g/appsutil/UAT_ingram.xml appspass=xxx
AutoConfig is configuring the Database environment...
AutoConfig will consider the custom templates if present.
Using ORACLE_HOME location : /data/oracle/db/UATdb/11g/
ERROR: Unable to set CLASSPATH
is missing
ERROR: Unable to set CLASSPATH
is missing
Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
The logfile for this session is located at: /data/oracle/db/UATdb/11g//appsutil/log/UAT_ingram/04091339/adconfig.log
[oracle@ingram bin]$

REPORT SERVER 6i Patch1 PRINTING BLANK PAGES

I have a problem that is occouring on three different report servers. It will start printing blank pages instead of the report and the only way to get it back to normal is to stop and reastart the service. I get this on a version 6, version 6i and version 6i patch1 report servers. It makes no difference what call method I use (command line or OCX control). I can also force this behavior on one of the servers by selecting a HP 895C as the default printer in the windows printers and then starting the service. All pages print blank after that. At the customers site it appears to be random as to when it will start printing the blank pages.
Any ideas on what the fix is for this?
null

Is there any ideas on this?
We have a Reports 6i server up and running and I'm getting stuff out OK to postscript printers, but some HP older printers are just spitting out blank pages. Is there a desformat= that I need to set differently? I've tried most of the options ( dec, psport, psland, hpl... all blank )
Appreciate any help, I haven't used this stuff long, so am quite naive about how it hangs together.
null

Duplex prints blank pages at section breaks in MS Word

Symptom: MS Word prints blanks on the backs of only some pages that should be auto-duplexed, resulting in even pages being printed on odd sides of paper sheets. Probability of problem is greater if one side is portrait and the other landscape.
Cause: MS Word creates a separate PostScript file for each section. (A section is delimited by a section break.) As each file arrives at the printer, the printer treats it as a new print job and so ejects the previous piece of paper before printing the first page of the next section. If the last page of a section is odd, then the first page of the next section can't print on the back of that piece of paper.
Microsoft told me it's the fault of the Mac OS. Anybody have insights? Has Apple even acknowledged this problem?

Next Page section break with different page orientations in the two sections (first section on odd page, next section on even page), is guaranteed to cause the problem.
But Next Page section break even with the same page orientation also causes the problem, though not 100% of the time. I've not figured out why on rare occasions it does not cause the problem. I've examined the usual suspects--anything requiring the second section to appear on an odd page.
Even a regular Page Break (not a section break) causes the problem at least most of the time, even though (by definition) there is no page orientation change.
This is a big problem for me, because I produce 300-page formally structured documents that really benefit from section breaks. I can't expect my readers to manually duplex.

OfficeJet 6500 prints blank fax page after every other fax page

How can I stop the printer from printing a blank page after every other incoming fax. If the fax is 5 pages, I get 10 (5 of which are blank). Tried HP support, and they can't fix this.

Sorry that you are experiencing this issue with printing blank pages. This can be a issue with the print head. You can try to clean the print head with a lint free cloth and water.
Another thing would be to perform a hard reset on the printer. Unplug the power cord from the back. Leave it out for 30 seconds and plug it back in.
See if you can print a self-test page or printer status report.
Let me know what happens.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP 3510 All In One only printing blank pages after cartridge replacement

Recently replaced my blank ink cartridge after supply level showed low, and printed output looked faded.
Using genuine HP product - check
Cartridge supply level good - check
Powered on and off twice - check
Installed, removed, re-installed cartidges - check
Good paper - check
Alignment prints blank page - does not print partial or low quality, just produces a blank page.
Printing from my computer, a word document, also produces a blank page - not parital - blank.
Was printing before the HP cartridge change.
Did I buy a bad HP cartridge?
Any help would be appreciated.

Forgot to mention that I am not getting an error message either, except when I go through the motions of scanning the (blank) alignment page. That error is related to the fact that it is blank though.
Thanks for any assistance.

Laserjet 4M Plus (C2039A) prints blank pages after cleaning?

I have a Laserjet 4M Plus (C2039A) that was working well. I was getting toner streaks so I disassembled the covers and cleaned dust and toner out. Cleaned plastic and plates with soapy sponge, cleaned rollers with alcohol, brushed and used air to clean dust. I'm good with mechanical projects. After re-assembling, I print blank pages. The menus, display, and computer interface seem fine. Paper feeds correctly. Self Test displays no errors, but I am unable to read printed test results or settings. I went into Service Mode, and ran Self Test there. I'm ready to disassemble it again, but do not know where to look for improper fit. What would prevent any characters from being printed? I'm using Windows XP drivers, and parallel port cable.

Hello kbright,
Welcome to the HP Consumer printer Forums.
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

How to print blank records after the detail records in a masterdetail report

Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

Your solution works when I am not limiting the no. of records per page for a department to 10 records and when I want to print blanks lines for the depts that has fewer than 10 employees in it.
Exactly in my report I have several dept's that has more than 10 emp's. In such cases I'll be printing first 10 in one page and the rest in the next page. Now I want to dynamically print the blank lines in the second page depending on the no. of emp's on that page. I tried to acheive this by using a CS column that reset's at page level but, REPORTS is not letting me use CS column that reset's at page level in a format trigger. I also tried to copy the CS value into a parameter and or to a Place holder column and did not help.
Any more work around ideas to acheive this?? please help.
Thanks alot
Kavita.
Hi
Create a column called Serial_No in ur emloyee query like this
select 1 , empno ,ename from emp;
Create a summary column on the serial column with the function SUM
and resetting it to Page
Display the column in the report by using the text color as white
so it doesn't display in the report
I think this should help u i believe
Sri
Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

Check for null values in string, if no values, print blank

Hi
I posted a question a few days back, after playing with functions I was able to resolve it, I just have one more problem, if the string comes empty, only blank spaces should be printed, following is my string and my fix:
My string:
SEV.ORI/999999.VIN/1D7Hx11111111111111.VYR/2005.VMA/DODG.VMO/THU.DOT/07072013.CRT/MI1111111.OCA/11111111890123000001.LIT/PC.LIC/BFK9331
=Left(Split(Fields!MESSAGE.Value,"/")(6),2) + "/"
& Mid(Split(Fields!MESSAGE.Value, "/")(6) ,3 ,2) + "/"
& Mid(Split(Fields!MESSAGE.Value, "/")(6), 5, 4)
With this I get: 07/07/2013
If DOT comes empty, i get .CRT/
So I need to validate for empty space on DOT and print blank spaces. I'm guessing it would be with an IIF
or IsNothing function. Any help would be appreciated.

Hi
Again after a few hours of playing with functions I resolved the issue, I will post the fix in case it can help someone else.
String:
M00836Z911134.SEV.ORI/MI3987656.VIN/1XXXXXXXXXXXXXX88.VYR/XXXX.VMA/FORD.VMO/THU.DOT/01192013.CRT/MIXX11XX0.OCA/XXXXXXXXXX123000XXX.LIT/PC.LIC/XXXXXXX.
Function:
=IIF(Mid(Split(Fields!MESSAGE.Value, ".")(7) ,1 ,3) = "DOT" , Mid(Split(Fields!MESSAGE.Value, ".")(7) ,5 ,2) + "/"
+ Mid(Split(Fields!MESSAGE.Value, ".")(7) ,7 ,2) + "/"
+ Mid(Split(Fields!MESSAGE.Value, ".")(7) ,9 ,4)," ")
Result:
01/19/2013
If DOT is missing, the space in the report comes blank

HP Officejet Pro 8000 Printing Blank Pages Instead Of Data And Also Reorienting Itself

Hi all
We have a wireless HP Officejet Pro 8000 in our office (but via cable, not wireless) to a network. The printer is occasionally printing blank pages instead of say a spreadsheet selected to print.
The other issue is that if you say are printing two copies of the same spreadsheet, one prints okay (say landscape) and the second copy, selected at the time of printing, prints it portrait but only part of the left hand side of it and the rest is blank. Coming out of and going back inthe file usually recitifes this. But it does it again any time it feels like it.
We did have an upgrade, where our IT guy took away our desktop boxes and replaced with smaller base units and everything is run from a main server and alsoan upgrade from Windows 2000 to Network. Problems started after this and the IT guy did update the printer driver.
Please would anyone be able to assist? Any help for this frustrating problem gratefully accepted!
Thanks,
Saxplayer67

So the issue with the 8000 printer is periodic print jobs do not come out as you are wanting them. Is that right? This is interesting, just from the point of view that generally speaking issues like this are like a light switch, they are either there or they are not - they usually don't come and go. That being said, we are going to see what we can do to resolve this. First I am going to recommend that we perform a clean installation of the printer after uninstalling it from the machine. By the way, what is the operating system you are working with - Is it Windows 2000 Network?
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3762364
Install that and let me know the result!
Have a great day!

Printer prints blank pages

I received a message low toner. Before I replaced the toner the printer printed blank pages. After I replaced the toner, the printer printed for awhile the same day and now prints blank pages. I took out the toner and moved it back and forth and replaced it and still nothing on the paper. Do I need a new printer? Thanks, Sally

Regarding blank pages printing:
Which printer model do you have?
Does it print a blank self-test page?
What operating system are you printing from, and what application (if not all apps)?
What driver are you using?
More info from you will help us offer suggestions to resolve the blank pages issue.
We enjoy helping if we can, as these forums have helped us frequently.

HP 3210 printer prints blank pages and only half the first page

When I updated to Firefox 4.0.1 my HP 3210 printer now prints blank pages before and after the correct page and then only prints half of it. It prints with no problem as before in Internet Explorer but I cannot keep going back to WExplorer just to print.

You have not said but it sounds like you are using a Macbook pro with retina display.
Pages is exhibiting all sorts of problems with the Retina display which Apple is supposedly working on.
Peter

InDesign causing others to print blanks pages

Okay so this is a weird issue and I'm getting no results.
My issue is simple. After I print in ID anyone else I work with prints blank pages (We're printing through a network to a device). Also cyan prints incorrectly; however that is fixed if I open the print driver from the print dialog. Now the color thing is a problem through all the adobe software (Illy, Photoshop, Acrobat). No matter which program I use cyan prints wrong. But back to the main issue, strictly ID causes others to print blank. It isn't consistent either. A single document could consecutively cause the blanks then not cause them a little later. We've tried ever print driver possible and the problem persists. Another curious behavior with ID in conjunction with Acrobat is if Acrobat is open and I try to export to .pdf from ID then both programs freeze (however no message of either not responding comes up in the activity monitor) and the preferences are erased from ID
I've spent 4 hrs on the phone with Adobe support and it's just some indian reading from a handbook asking over and over if I deleted my preferences. I've spent days with the printer manufacturer and worked with 7 of their tech specialists and even had them send out a new unit and still the issues. I need to know if the rest of the world is seeing this. Or if this is even close to something someone has seen
So from what I'm seeing is a problem with the PostScript writing that's freaking it out but I'm not software engineer so I can't say for sure.
I'm running CC (though we still had the problems on CS6)
OSX 1.7
ID version 9.2.2
printer is a Konica Bizhub 554e (it's a laser copier)
Thanks,

I actually have created a .pdf and had others print it (a file I create in ID and export to pdf). What ends up happening is if I try to print the pdf people after me get blanks. However if someone else prints it there is no issue. I may have left out an important point I'm the only mac that uses the printer, everyone else uses pc (and I don't know if that's an issue). I only have a postscript driver available (which is good) but i don't know what everyone else is using. I want to say in all of this i heard they have a PCL driver.
As far as the router, I'm hardwired into the network so there is no router. Konica and our IT have checked the network and ruled out that possibility (and I don't really know what that means)
But you are reaffirming the fact it is the printer and they need to fix it. And the fact that a document printed with only cyan is printed with all four colors to give me some weird off color makes me think the disconnect is between Adobe and the printer. But still so weird about the blanks.
Thanks for the input

IPhot Prints Blanks After a Back Up

Similar Messages

Maybe you are looking for