IPod classic restarts itself after connecting

After installation of iTunes 9 my iPod 120GB often wouldn't connect, but I think that happened to all of this iPod users. Today I plugged it in, but after showing "Connected. Eject to disconnect" for about 2 seconds, it restarted itself, showed an Apple logo for 10 seconds and disconnected. After that it connected itself again for two seconds, restarted, disconnected, connected, restarted, disconnected...
Also: there is some of my iTunes Library on the iPod, but only podcasts can be played.
Message was edited by: wsiul

Yea mine is doing the same exact thing right now. WELL its an older model than yours most likely...

Similar Messages

Ipod Classic ejects itself..

My Classic ejects itself after connecting to my PC (WINDOWS XP PROFESSIONAL SP2) i cant find what the problem is..
i have/tried
-USB 2.0
-WINDOWS XP SP2
-connecting it behind the PC
-5 Rs
-Repairing my iTunes
-connecting it in different USB ports
-taking off other devices that are connected in the USB ports
-iTunes 7.6
-tried different cables
-tried using another account/user in my PC
the store where i bought my CLassic doesn't encounter this problem.. i also lend it to my friend and it worked perfectly with him too.. i came up of a conclusion that my PC is the problem.. but how do i fix it?? are there any ipod drivers i need to install in my PC???
PLEASE HELP ME! I'M DESPERATE =) THANKS!!!
PS: MY Classic charges when it's connected in my PC..

hi, i thought i'd offer an alternative solution as i found something that worked for me.
i got my first ipod yesterday (the classic 80gb) and i have had this problem. it kept ejecting itself intantly. well...i managed to update it to 1.1.2 and sync it once but then i had this problem since. i tried different usb ports and also different cables but nothing worked.
this is what finally worked:
before, i always had itunes open and running then plugged in my ipod and i got this problem. i tried closing itunes, and just plugging in my ipod to the computer without itunes running and it didn't eject (nor did it open itunes for me as apparently it is supposed to) so anyway i connected and it held the connection without ejecting, then i opened itunes manually by clicking the icon and it held the connection. at this time i changed the settings to manually sync the ipod and to use it as a hard disc, and since then (only this morning) it has worked ok and not kept ejecting. hopefully it'll continue to work in this way. good luck guys hope it works for you too.
what a crappy company apple must be to have such a high profile product used my millions and it's just plagued with constant problems and bugs. my mobile has to do 3 times as many things as the ipod and it never has any trouble. sort it out apple!!!!!

My Ipod classic says its syncing but restarts itself after disconnect what's going on?

I have a second generation Ipod Classic. When i connect it to my computer to sync to Itunes it says its syncing then proceeds to go through "steps" to find which songs need to be synced; syncs them then takes forever to connect then allow me to eject. When I correctly eject the ipod from the USB, the Ipod device basically restarts itself and does not have any of the new music on it. I have tried a force restart and it's still acting this way. Any input before I throw in the towel and opt to buy a new device?

Hi kristenleducphotography,
I have a link for you that will help you troubleshoot this issue with your iPod classic. This link is to a troubleshooting assistant that will take you through the steps necessary to determine the source of the issue:
Apple - Support - iPod - iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Frustrating! iPod Classic restarts computer!!

I have gone through numerous help guides from Apple and have searched through at least 40 pages on the message boards and have yet to find any advice that might actually help me. I recently got a new 160GB iPod Classic and when I connected it to my computer through the USB port it was not recognized by iTunes but a little bubble popped up in Windows saying that a USB Mass Storage Device had been detected and as soon as that disappeared, the computer went to a blue screen and then restarted. The blue screen did have a message on it but it flashed so quickly that it was impossible to read. I tried nearly everything I could think of to make the problem stop. I deleted a lot of old programs from my computer, I reinstalled iTunes, and have tried other things which were suggested in the help articles. However nothing I did fixed the problem.
I took the iPod back to the Circuit City where I had purchased it and the guy there tested it by plugging it into his computer...he had the same problem. Thinking that it was an issue with the iPod, we got a new one. Unfortunately the same problem occurs with the new iPod. I also bought my father a 4GB iPod Nano over a month ago but haven't had the time to get his hooked up, and oddly enough it restarts the computer as well.
For some reason my ancient 20GB iPod still connects to iTunes, but only through Firewire. I've tried using Firewire with the Nano and the new Classic, but iTunes won't recognize the iPods through that either, but at least it make the computer restart.
Any advice or help would be greatly appreciated!!

Hi chaps,
you may add myself to your problem report list too.
After having installed iTunes 8 thru the update process called up from Vers 7 my iPod classic 80G is crashing the Vista computer. Blue screen indicates "usbappl....sys" to be the issue and after Vista recovery the problem report includes the info
BCCode: 1000007e
BCP1: C 00 00 00 5
BCP2: 8D7DC515
BCP3: 8895B688
BCP4: 8895B384
OS Version: 606001
Service Pack 1_0
The crash happens regardless of whether iTunes is running or shut down. The ipod classic 80G works on another machine under XP and using iTunes 7.xxx
I hope that Apple can very soon offer an update to iTunes.
cu

Brand new iPod touch restarts itself all the time

Hello, my dad just came home from Japan, with a brand new iPod touch.
I managed to register it in iTunes, but when i updated the firmware i got an error message. I tried again and i think that i succeed. Then i started to sync music and the rest of the stuff. The syncing stopped after a minute, and when i tried to navigate on my iPod i realised that the touch screen didn't respond. So after several attempts, i made a hard reset.
But now, the iPod touch restarts itself. The Apple logo comes up, and then the screen turns off in a dramatical way, and then the Apple logo comes up again. If i hard reset my device again, the process continous.
I sometimes the iPod shows the "charge battery" screen, and then I can charge the battery. BUT after 5 minutes, the iPod touch starts restarting itself again. :S
Does anyone have a solution to this? Extremely strange.

I suspect you have a hardware problem. Probably a non-functioning battery (over or under) and causing a hardware reset. Bring it to an Apple Store for replacement.
iPhone / Touch / Shuffle (1st gen)

Why does my Power MAC G4 keep restarting itself after I shut it down?

Hi,
Thanks for reading this.
Why does my Power MAC G4 keep restarting itself after I shut it down?
This JUST started happening only 4 days ago.
Most recent installation was Limewire, but I removed it to see if this problem would go away.
I have 3 internal drives (See drive types below) that all have OS 10 on them in order to be able to boot up from either drive in the event of trouble.
However...
No matter WHICH drive I use as the start up drive... the computer STILL restarts itself after it is properly commanded to shut down.
Prior to the Limewire install... the ADOBE creative suite was installed.
There is a Lexmark X83 printer hooked to the computer, which, it seems doesn't matter if it is left on or off... the computer still restarts itself.
Any ideas?
Thanks!
PowerMAC G4(2002 Quicksilver) Mac OS X (10.4.5) 2 Seagate SATA 250GB drives, 80 GB Seagate ATA drive, Digital Performer 4.6
PowerMAC G4(2002 Quicksilver) Mac OS X (10.4.5) 2 Seagate SATA 250GB drives, 80 GB Seagate ATA drive, Digital Performer 4.6

Hi, Tommy!
If you still have problems, trash the following three preference files, then shut down and do a PMU reset. (PMU reset procedure for the QS is the same as is shown at the link for the Gigabit Ethernet.)
HD/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
HD/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
User/Library/Preferences/com.apple.systemuiserver.plist
Gary
1GHz DP G4 Quicksilver 2002, 400MHz B&W rev.2 G3, Mac SE30 Mac OS X (10.4.5) 5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! Nothing seems to work! HELP! :/

A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! I have done this a few times and nothing seems to work! HELP! :/

Transfer all of your content to the computer:
Tunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
http://support.apple.com/kb/HT1848
Then try turning the device off and on again. I'd leave it off for 10-15 minutes, but that is up to you:
http://support.apple.com/kb/HT1430
If the item is still there, you may need to restore the device:
http://support.apple.com/kb/HT1414
Hope that helps . Worst case scenario, you may need to write into iTunes support to see if they can also help!!

ITunes 10.5.3 restarts itself after closing the program. How do I fix this?

iTunes 10.5.3 restarts itself after closing the program. How do I fix this?
Windows 7 64bit Ultimate
iTunes 10.5.3 64bit

I've had this problem on my Windows XP for years. it's been around, unsolved, or no solutions in these forums.
It keeps reminding me why Apple will never be the primary office computer company. Anyone running a business cannot have software running that will not behave, won't shut down, or behaves without any explanation, and this problem has no explanation, or solution that I can find except to use task manager to kill the process and only use iTunes when I'm expecting to shut down or kill the process.

Oracle Linux 6.4 installs, runs, and manual shutdown OK ... but restarts itself after 10 minutes or so

Hi Guys
Successfully installed Oracle Linux 6.4 operating system , which subsequently runs as expected.
When Oracle Linux 6.4 is shutdown using standard GUI system/shutdown ,
it does a clean shutdown and power-off as expected ....
UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
Likewise when Oracle Linux 6.4 is shutdown using standard command line " shutdown -h now" ,
it does a clean shutdown and power-off as expected ....
UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
Clearly it is NOT desirable to have the operating system able restart of it's own accord.
A manual shutdown is typically done for good reason , and the server should remain shutdown.
The previous version, ie Oracle Linux 6.3 did not exhibit this behavior.
When Oracle Linux 6.3 was shutdown, it stayed shutdown
Question
======
Does anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
Thanks
Bruce

Does anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
Assuming your network interface is eth0, execute "$ ethtool eth0", like below, and indicate what you get for the lines "Supports Wake-on" and "Wake-on.
lx04:/root $ ethtool eth0
Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes: Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: Unknown
        Supports Wake-on: pg
        Wake-on: d
        Current message level: 0x0000003f (63)
                               drv probe link timer ifdown ifup
        Link detected: yes
Then check in your BIOS (usually under APM) for any enabled power-on settings associated with PCI or PCIe bus (your NIC will use one or the other).

Why does Airbook sometimes restart itself after shutting down?

My MacBook Air sometimes restarts itself after I shut it down. At first I thought I was carelessly choosing the wrong command, but now I'm clear -- it's the Airbook. Also -- I had thought this was unrelated, but now I'm not so sure -- it's been forgetting to start up automatically some mornings. And yesterday at 3:19 pm it informed me that it was getting ready to shut down, "as instructed" (the actual instruction in the Energy Saver is for midnight).

From: Eustace Mendis
Sounds like a Broken Drive...
Most of the times this will be solved with a HardDrive Replacement
although,
you could try this
Restart your Mac and hold down the Command key and the R key (Command-R).
Keep holding these keys until the Apple icon appears.
This indicates that your Mac is starting up.
After the Recovery System is finished starting up,
you should see a desktop with an OS X menu bar and a "Mac OS X Utilities" window.
After you do this, select Disk Utility and run it.
On the next screen,
Select the hard drive in the left hand column,
the First Aid tab on the top, and click on Reparid Disk. (bottom left)
When that is done, click on Repair Permissions.
When that is done, quit Disk Utility and restart.

Satellite P300 keeps restarting itself after initial start up screen.

My Satellite P300 keeps restarting itself after the initial start up screen.
The initial start up screen with the F2 & F12 options at the bottom appears, the screen then goes black, then a cursor appears in the top left hand corner and flashes a couple of times. Then the laptop shuts down and restarts itself and goes through the same process over and over.
This is all with the power adaptor plugged in. If unplugged, it will go through the above mentioned process and shut itself down with no restart.
Any help or advice would be much appreciated.
Message was edited by: aic-poppy

F8 is not listed in this meny, just F2 and F12 but F8 should help you to enter Advanced boot options .
Can you please give an answer to C3POs question?
Have you made some hardware upgrades in the past (RAM, HDD)?
Have you changed anything?

Why does my ipod classic stop playing after a few songs?

why does my ipod classic stop playing after just a few songs?

is your battery charged? How many songs do you have on the playlist (if you are playing a playlist when it stops)? I know that when the earbud wires are accidentally disconnected from the ipod body, the music stops automatically.

I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

Charge it up fully. Toggle the hold switch. Try getting into diagnostics mode again. See Corrupt iPod classic.
tt2

HT1363 why is my ipod classic ejecting itself from my laptop?

why is my ipod classic ejecting itself from my laptop?

Is Enable Disk Use ticked from under the iPod's Summary tab? Does this happen when you plug the iPod into another available USB port?
Are there any other USB devices that are plugged in?
B-rock

IPod classic restarts itself after connecting

Similar Messages

Maybe you are looking for