Ipod nano 6 gen power button and volume up and down not working, Ipod nano 6 gen power button and volume up and down not working
Ipod nano 6 gen power button and volume up and down not working, Ipod nano 6 gen power button and volume up and down not working
Try restarting your device. If that doesn't work, take it to an Apple store. If it is less than a year old and just stopped working, they will replace it for free (be sure to back it up to iTunes first). If you dropped it, you will have to pay because Apple will not replace a device due to "Human Error." If it is more than a year old, you will either have to pay to get it fixed, or have to pay to get it replaced.
Similar Messages
-
My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My 4th generation iPod touch is super slow and sometimes i have to click the home button multiple times before anything happens. Its up to date and is a 32 gb but barely half way full. My friends have the same kind as i do, and they have the same problem. Mine is a little over a year old and i'm VERY disappointed in something that i spent over $300 for. What am i supposed to do to make this peice of crap work like it's supposed to? I paid a lot of money for it and i expect it to work but the only thing i've heard so far is "turn it on and off." Yeah... cause that solves everything. Does anyone know how to help me?
Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Also, sometimes restoring the iPod helps. -
My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?
Sounds like the battery is shot and in need of a replacement. You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
Not much else you can do for troubleshooting this one.
B-rock -
I have just received a brand new IPOD Touch ,it will not turn on, i have connected it to my cmputer, it does not show that its charging and is not recognised in Itunes. I have tried the holding down the power and home buttons which also didnt work. Any Ideas Please ????
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i have an ipod touch 4th gen i reg it on my decktop then it had a power surge and blewup so i put itunes on my laptop and now it will now let me do anything to my apps pics or music what can i do i tried to reinstall but that didnt work i dont want to restart because of the pics and video that is the only copy i have now please help me
Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
Do the same again and choose "backup", to create a manual backup without syncing.
Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts. -
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
-
When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?
This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
-
my iphone 4 will not charge in the plug or connect to my laptop but my ipod 4th gen does. what could the problem be because the screen to show it needs charging will not come up and it will not restart by holding the home button and lock button. thanks
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W -
I tried following the directions that I received about restoring my iPod touch. But there is one flaw. My power button is stuck and I am unable to turn it off. How can I go about either getting it fixed or restoring my iPod?
Easy, first make sure that the itunes on your computer is up to date. Next connect the ipod to your computer. If you have itunes 11.0 or above, wait until the device appears in the upper right hand side of the screen, or you can press ctrl-s, and the side menu will appear, and you can see more clearly the ipod appearing under the device category. Next simply click on the ipod and on the summary screen, you should see restore. Press restore, and you will see a dialog box asking to back-up & restore, restore only, or cancel. If you have information to save, press back-up & restore, if you want to wipe the device clean and start over, press restore. Once it's all done, you should be good.
If your ipod is less than a year old and not a refurbished device, contact Apple at 800-676-2775 for assistance on repair and replace. If you are near an Apple Store, go to http://www.apple.com/retail/ and find your local Apple Store and set-up a genius appointment and go in and have your device repaired or replaced.If your ipod is a refurbished device, it has to be 90 days old or less to be repaired or replaced for free.I hope this helps. -
I upgraded to itunes 10.6 and with that "upgrade" I can't manually sunc to my ipod nano 5th gen anymore. I have re-installed itunes, restored my ipod, tried syncing under another users account and everything else I can think of. It syncs ok upon initial start-up but then when I tryp to select podcasts or music to sync to it, itunes crashes. Now that I restored my ipod, I can't even get my old podcasts much less add new ones.
Do you have any better luck with that if you update to iTunes 10.6.1.7?
From the notes for the release:
iTunes 10.6.1 provides a number of improvements, including:
• Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
• Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
• Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
• Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
http://www.apple.com/itunes/download/ -
My nano ipod fell this very day and the button and - are inserted and as soon as I light my ipod his démare on another menu with “ok to disconect” help me please I have expensive invests for me to pay it.
Probably has hardware damage from the fall. Take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you.
-
I sat on my iPod and on the side the metal is off the iPod and nearly covering the volume controls what do I do? (3 gen iPod touch)
You might want to repost, now that you have marked your question answered you may not get many people looking at it.
-
Cannot upgrade my iPod Touch 3rd gen from 4.2.1 to 4.3.2. I click the button "check for updates" on iTunes and it says "This version of the iPod software (4.2.1) is the current version."
1.Go to http://www.felixbruns.de/iPod/firmware/
2.Download the iPod Touch 3G 4.3.2 Firmware to your desktop.
3.Go to your iPod summary, then hold shift.
4.Keep holding shift and click Restore.
5.Go to desktop on the window that comes up and click the software. -
My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS require a a passcode and I don't have one. Any suggestions?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup.
In order to restore with the unknown Restrictions passcode you will likely have to place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Last,
- Restore to factory settings/new iOS device.
Maybe you are looking for
-
A6000 - Font not supporting Indic languages like Tamil
A6000 - If I open a webpage which is at tamil unicode, it is rendered with plentry of junk characters. It is the case with all the browsers, Chrome, Firefox, Opera, UC Browser. Same issue on my friend's A6000. So it is confirmed, it is not a browser
-
file:///Users/roandre/Desktop/Screen%20Shot%202014-05-01%20at%201.03.09%20PM.png Thisnis what appears and NOT a microphone icon as before. It looks as though it recognizes my voice but won't write anything down???
-
How to recover iPhoto app which is deleted from trash
How to recover deleted iphoto application from the macbook pro
-
Apple ID and purchase in another country
Can an old apple ID for another country be used for purchase from another country???
-
Setting a fix file output size regardless of input file..How?
I need to make several short movies that do not exceed 50MB in size as that is the limit set by my hosting company. Microsoft's movie allowed you to do this and would adjust the quality to suit. But how in Imovie?