IPod nano and Altec Lansing inMotion im5, clicks between tracks?

When I'm using my iPod nano with the Altec Lansing inMotion im5 there are 'clicks' between the tracks. When I'm using my iPod headphone I don't hear these 'clicks'. What could be wrong?

I've been playing around with my iPod nano and the im5 speaker system. I guess that the clicks might be caused by a gap (longer than 5 seconds) between the songs. It would have been no problem when the iPod should have a crossfade playback like iTunes has. I haven't heard the clicks when I use the iPod dock. The one I heard was just a strange end of a song....sorry!
Inox

Similar Messages

  • Using ipod classic with altec lansing inmotion im600

    has anyone had any experience where the music just stops and the display goes to the battery full pattern while in the middle of playing music through a dock?
    this has been happening with my ipod and it doesn't seem to happen when it's not connected to the dock.

    it is possible you might have to buy an attachment...i think you have to do that with BOse speakers, but i'm not sure abou these

  • I have an ipod nano and use one click digital to download books from my library.  My nano says I have 2449 songs which is 65 books.  I have deleted all my playlists after I listen to the audiobook.

    I have an ipod nano and use one click digital to download books from my library.  My nano says I have 2449 songs which is about 65 books.  I have deleted all my playlists after I listen to the audiobook.  Now I get a message saying I don't have enough room on my nano to transfer new books to it.  My nano is 16 GB and my operating system is Windows 7.

    iTunes and Apple's devices work as an ecosystem. iTunes is designed to sync with Apple's products, not anyone else's. You'll need your songs in a format compatable with the Samsung phone and to use the software transfer program supplied/recommended. It is essentially not an Apple/iTunes problem. You may have better luck finding the information you need on Samsung's forums.
    tt2

  • Hi, I have a 7th Gen Ipod Nano and I am unable to delete songs. When synced on the PC I can select tracks but right clicking on them does not give the ability to delete. I have downloaded the latest 1.0.3 software but it did not help.

    Hi,  I have a 7th gen ipod nano and am having a problem with deleting songs. I can select the track in my ipod's library but right clicking does not bring up the option to delet. I have downloaded the latest update for the ipod but this has not solved the issue. Can anyone suggest a remedy? thanks

    Hello Lor100,
    In order to delete or add individual songs from and to your iPod, you'll need to enable 'manual mode' on the device. This will allow you to add and remove exactly the content you desire.
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1535
    Cheers,
    Allen

  • Compatability with Altec Lansing inMotion player

    Hi guys,
    I am thinking of switching to the iPod fifth generation, but I have some concerns. Will the 60GB or 30GB iPod fit into my Altec Lansing player? I use the Altec Lansing inMotion IM3c.
    I need to know if it will fit.
    Thanks in advance!

    Hi--
    How can you tell if you have an IM3 or an IM3c? I'm in the same dilemma regarding upgrading to a 5G iPod.
    Thanks!
    Sharon
    Following up on my previous post:
    Altec Lansing customer support told me today that
    they are to come out with an adapter for the Nano
    first and sometime in the future should make an
    adapter for the 5th gen ipods to fit the IM3. For
    now, they said only the IM3c version will work with
    the 5th gen ipods.
    I had pointed out to the person I spoke with that
    there appeared to be a lot of 5G ipod owners not
    wanting to replace expensive speakers for lack of an
    adapter. So, based on the age of a persons' IM3,
    Altec Lansing may exchange an IM3 for an IM3c--as
    they are doing for me. Now that's customer service!
    powerbook G3   Mac OS X (10.0.x)  

  • New IPOD nano and getting HKEY_LOCAL_Machine\software\Classes\quicktime

    I tried to install the software for my new iPod Nano and it would nto load for this message:
    could not open key: HKEYLOCALMACHINE\Software\Classes\QuickTime,QuickTime\CLSID. Verify that you have sufficient access to that key, or contact your support personnel. I've tried shutting off the firewall and made APPLE a trusted site. I even removed the old Quicktime from my computer and this did not work. Please help this not very tech savvy old lady.

    I had a similar error:
    Could not open key:
    HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib
    .QuickTimePlayerApp\CLSID. Verify that you have
    sufficient access to that key, or contact your
    support personel.
    Apple help told me it was a Windows problem and that
    I needed the Service Pack 2 (SP2). I already had that
    update, so that alone was not the problem. In surfing
    the net, I found an answer for my error that worked
    on bleepingcomputer.com from HitSquad. Here it is, it
    may work for you too:
    Click Start>Run and type "regedit" (without the
    quotes)in the Run dialog box and click OK. This will
    open the Windows Registry Editor. In the left side of
    the window, navigate to the path in the error
    message. HKEYLOCALMACHINE is the top folder,
    Software is the next folder, etc., etc. Right click
    on the Quicktime.qt folder and select
    "Permissions...". In the Security tab, it should list
    Group or user names you have. Select a user name and
    in the lower part of the window, make sure "Full
    Control" and "Read" have check marks under "Allow".
    Click "Apply". Now log back on under the username
    listed in the upper part of the window.
    Mine had a strange twist, even though I am an
    Adminstrator on my computer, for some reason, my user
    name was not listed. My son's user name was - maybe
    because he loaded the itunes initially? I changed his
    account to administrator and loaded itunes and
    QuickTime under his name and the error went away.
    Anyway, itunes 7 is now working. I'm no expert, but
    this worked for me. Good Luck!
    JB
    This was a fix for me. I have to use my wifes log in to windows. I think she might have loaded the itunes a while ago under her log in. Good Luck everyone. At least now I can use my 80 gig ipod for something else than a paper weight. I must say though, Microsoft would have had a fix by now for this.
    Good night and good luck,
    Chief

  • Please help, iPod Nano and iTunes issues

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    Please help! This is my first ipod purchase and so far it is really disappointing me and frustrating, thanks
    -Alex

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    with that particular set of symptoms, first check on the possibility described in the following document:
    iTunes for Windows: iTunes 7 doesn't recognize iPod

  • The radio is not working in my ipod nano, and has the correct zone, how can I make it work?

    I bought the new Ipod nano, and the radio is not working. I live in the USA, and has being setting in "America" zone, but is not working!! I plugged the headphones, and I tried in different places, and I not working!!!
    What could I do?

    Check if the headphones are inserted all the way in till you hear a click. Hope this helps!

  • 1G iPod Nano and podcast on iTunes

    I have a 1G iPod Nano and I downloaded some podcast onto iTunes, but I can not transfer them onto my Nano. I tried to click and drag them over, but nothing happens when I do that. Please Help!!!

    I am more than frusterated with trying to get a podcast to my nano. I downloaded some Joe Cartoon ones and verified they are in the corrected format but I still cannot get them into my Ipod regardless of manual or automatic updates for the podcasts. I have no issues with having the music update on its own but this podcast issue is pushing me over the edge, I have about 10 hours into it and definately need some guidance, any additional help is greatly appreciated.
    laptop   Windows XP  

  • HT203167 I lost purchased music on my computer that was purchased in the last 4 to 5 months because of virus. I did not back up the few songs I purchased on cd. I also lost all data on my Ipod nano and had to restore it. How do I download these purchases

    I lost purchased music on my computer that was purchased in the last 4 to 5 months because of virus. I did not back up the few songs I purchased on cd. I also lost all data on my Ipod nano and had to restore it. How do I download these purchases I lost?

    Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time; you can see what content you can download here:
    http://support.apple.com/kb/HT5085
    You can also re-download content using an iOS device.
    For more information, see:
    http://support.apple.com/kb/ht2519
    This if course will not apply to songs you did not buy through the iTunes Store.
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • I have a Ipod Nano and want to get another one , and use both. Can I use the same computer and library for both?

    I have a Ipod Nano and want to get another one , and use both. Can I use the same computer and library for both?

    Yes

  • We have itunes music on a computer, an ipod nano, and a new ipod touch under two different accounts. How can we combine the music from both accounts to one device?

    We have itunes music on a computer, an ipod nano, and a new ipod touch under two different accounts. How can we combine the music from both accounts to one device?

    There is no "adding" a device.  Simply plug the iDevice into the computer.  iTunes should automatically detect the device when it is connected.
    iTunes can sync/manage as many iDevices as you want... there is no 1 device limit.

  • I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

    I have created an iTunes account on my current computer for my daughters ipod touch and tried connecting my ipod nano and it won't sync and says that it is associated with another iTunes library so how do I merge the two libraries?

    You do not merge libraries.
    iDevices sync to one and only one computer.
    If you want a single library, you manually move the content from one library to another... all content will still be associated with the Apple ID it was acquired with.

  • I just got an ipod nano and i went to use itunes. I noticed that my boyfriend already had account on my computer. I was able to put in my email and purchase a few songs however it will not sync to my nano. I went to devices and it will not sync.

    I just got an ipod nano and noticed i had Itunes on my computer. My boyfriend had downloaded it for him a while ago on the computer with his own music. I went on the account and downloaded some music but it will not let me sync it to my nano. I believe that must be because it is his account. I went to the control pannel to uninstall the program (with his permission hehe) and re downloaded it. All of his stuff came back up. I am not able to sync anything to my nano thanks for any input!

    Uninstalling and reinstalling iTunes has no affect on the media on the computer or the account it is linked to.
    If the media was purchased under another iTunes account, then it is permanently tied to that account.
    Using mulitple iDevices with one computer

  • I have a ipod nano, and I bought a Bose portable sound system, when I put my ipod in the unit and play my songs in shuffle mode, it plays the same song over and over, how do I get it to play in shuffle mode?

    I have a ipod nano, and I purchased a Bose portable sound system to play my ipod on
    but it will not shuffle the music, it will play the same song over and over, until I hit the
    next song on the remote or do it manually. Does anybody have a solution?????

    Sounds like the repeat setting has been enabled.  See your iPod's User Guide for information on how to turn it off.
    http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
    B-rock

Maybe you are looking for

  • Phone line out of order since 27th August

    Reported to BT 27th August, no response or progress until I chased on the online chat facility, told fault was with the BT network and would be fixed by 25th Sept.  Not fixed on 25th Sept so phoned BT who said it would be fixed by yesterday (30th Sep

  • Paths in templates

    hi, read some threads about it, but still cannot find out. it's a simple piece of code where is a path to a specific folder which DW doesn't treat as a link/path and that's why pages on different level than a tempalate doesn't works. here is the line

  • Error in FROM clause (MS Access)

    I'm getting an 'error executing a database query.' The query is a simple <cfquery name="myquery" datasource="#application.dsn#"> SELECT * FROM #url.table# </cfquery> The debugging info i get is as follows: SELECT * FROM Order VENDORERRORCODE -3506 SQ

  • SRM vendor spend

    dear all, is it possible to find the amount spend on a catalog item in SRM? if it is possible, what tcode can i use to view it?thanks

  • Error message (undefined package 'lang')

    I keep getting this message every time I try to compile my programs. Where can I get the 'lang' package?