Ipod problem, someone help me out
When I update my ipod it gets to about the 150th song or so and then it freezes up and makes some "skipping" noises. I've let it work through this issue before but the songs that it froze on didn't go on my ipod correctly and therefore would cause the ipod to freeze when I tried to play them after the update was finished. Best Buy has told me there is nothing wrong with it but I don't believe them. Someone please help me out.
You could try removing the check mark from roughly the first 20 songs in iTunes.
Then, connect your iPod, and when you see your Summary page, select the option to restore. (Note that this will erase everything from your iPod, but will also resolve most iPod software issues). After the restore completes, you'll get the iPod Setup Assistant, which is basically where you type in a name for your iPod. When you get to this screen, uncheck all of the automatic update options, and then click OK.
On the iPod summary page, you can remove the checkmarks from Manually manage music and Enable disk use. Then, select the option that says Only sync checked items. Then click Apply, and iTunes should start syncing only the songs that are checked.
If this resolves the issue then there is most like a problem with the songs in iTunes. I would restore them from a backup if you have one. You could also try burning these songs to a CD and then importing them back into iTunes.
If this does not resolve the issue, you're probably right in suspecting an issue with the iPod. If Best Buy won't help, you can have your iPod serviced through Apple if it's still covered under your warranty or AppleCare protection plan. You can go here to set that up:
http://depot.info.apple.com/ipod/
If you'd prefer to go through Best Buy, at least now you can go back there and explain the troubleshooting you've gone through to isolate it to an issue with the iPod.
CG
Similar Messages
-
Could someone help me out? ActionScript
import flash.display.MovieClip;
var clip:clip01 = new clip01;
var clip2:clip02 = new clip02;
var clip3:clip03 = new clip03;
var clip4:clip04 = new clip04;
var clip5:clip05 = new clip05;
var files:Array = [clip,clip2,clip3,clip4,clip5];
function randomizeArray(array:Array):Array
var newArray:Array = new Array();
while (array.length > 0)
newArray.push(array.splice(Math.floor(Math.random()*array.length), 1));
return newArray;
var RandomArray:Array = randomizeArray(files);
trace(RandomArray[0]);
trace(clip);
var c:MovieClip = MovieClip(RandomArray[0]);
addChild(clip); // it’s OK
addChild(c); // I get the error msg bellow:
Scene 1, Layer 'movies', Frame 1, Line 29 1118: Implicit coercion of a value with static type Object to a possibly unrelated type flash.display:DisplayObject.
Could someone help me out?
I cannot add MovieClip on the stage from the array.I have done till this the following code bellow. I’d like movie clip on the
stage to be playing one after another in a randomized order in a loop. I
used a timer, but this solution is not good, because the movies are not
playing till the end. I need an EventListener to listen the end of the clip.
How this code could be modified to work well, could you give me a solution
to this problem?
import flash.display.MovieClip;
var clip1:clip01 = new clip01 ;
var clip2:clip02 = new clip02 ;
var clip3:clip03 = new clip03 ;
var clip4:clip04 = new clip04 ;
var clip5:clip05 = new clip05 ;
var files:Array = new Array();
pushArray(clip1,clip2,clip3,clip4,clip5);
function pushArray(c1,c2,c3,c4,c5:MovieClip){
files.push(c1);
files.push(c2);
files.push(c3);
files.push(c4);
files.push(c5);
function randomizeArray(array:Array):Array
var newArray:Array = new Array();
while (array.length > 0)
newArray.push(array.splice(Math.floor
(Math.random()*array.length), 1)[0]);
return newArray;
var RandomArray:Array = randomizeArray(files);
var testTimer:Timer = new Timer(1000);
testTimer.addEventListener(TimerEvent.TIMER,updateFile);
testTimer.start();
function updateFile(event:TimerEvent):void
if (RandomArray.length == 0)
pushArray(clip1,clip2,clip3,clip4,clip5);
RandomArray = randomizeArray(files);
trace('play file',RandomArray[0]);
RandomArray.shift();
//RandomArray[0].addEventListener(Event.ENTER_FRAME, VideoFinished);
function VideoFinished(e:Event):void {
if (RandomArray[0].currentFrame==RandomArray[0].totalFrames) {
trace("finished");
//addChild(RandomArray[0]); -
Im trying to update my apps. And it telling me i purchased them once i go to sign in to update them, i sign in and it goes straight to my account and all im trying to do is update my apps. Can someone help me out to updare my apps . Thanks
Sweetsusieq wrote:
... i sign in and it goes straight to my account ...
And... What seems to be the problem...? -
I'm trying to open an iTunes account and was asked to provide one of each:credit card details or gift card details.i provided a gift card details and yet I'm being asked to contact the support team!!! Pls can someone help me out on this as I cant enjoy my new iPad 3 without buying apps
Brenda, the easiest way to contact the support team is thru the iTunes Customer Service website:
http://www.apple.com/support/itunes/contact/ -
I am a new iPod shuffle 4th Generation user and I cannot sync the music in my Windows Media play to my new iPod, can someone help?
Hi Daisymae3,
The iPod shuffle does not use Windows Media Player to sync, it uses Apple’s iTunes application, available for free from this web site -
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
See also the manual for your iPod shuffle -
User Manual iPod shuffle
manuals.info.apple.com/MANUALS/1000/MA1550/en_US/iPod_shuffle_4thgen_User_Guide .pdf
Specifically Chapter 3 - Setting up the iPod shuffle.
iTunes is the free software application you use to set up, organize, and manage your content
on iPod shuffle.
Thanks for using Apple Support Communities.
Best,
Brett L -
please can someone help me out. I initial configure my bluetooth stereo ear piece with my iphone 4 and it was working but I mistakenly forget the bluetooth device and I cannot reconfigure it again with my iphone 4?
place the device in pairing mode and re-pair.
If you don't know how to do this, go to the manufacturer's website and download the user guide for your device. -
I want to erase my hard drive and reinstall lion server. Can someone help me out?
i have a mac mini running lion server. I want to erase all the date and start fresh. When i try to reinstall Lion it does not show anything about lion server but jut Lion. I want to make sure I do it properly. It is also asking me in which hard drive to install Lion but im unsure.
can someone help me out?Check in the app store under purchases both lion and server should show up there to download again.
No need to erase both drives for a clean install just the drive you are using for the OSX. Though if you are truly starting a fresh then erase and reformat both.
As for Upgrades. Yosemite is the only upgrade now available through the app store as is Server 4.0 for Yosemite. I have not tested the latest server yet and can not comment on it's reliability.
Any server you set up should be thoroughly tested on a closed network before going live.
Hope this helps.
PJRS -
I received telling me that my icloud storage is almost full. I need to upgrade my storage. Can someone help me out with this. I understand that the 20 GB is only .99 per month. Just hoping this would be enough for me. I back up 2 ipads and my iphone on the same computer. Any help you can give me would be appreciated. Thank you.
Okay.
I responded as I did because you wrote, "I have 2 ipads and my iphone that I back up on one computer"
No worries here.
But hopefully you get/got it sorted.
Any issues, post back. -
I am using a mac book pro version 10.7.5..I am not able to authorize my digital signature.It is showing crypto service provider is missing. I am in a big problem . plzzzz help me out. Thanks
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
Could someone help me out how to insert a Node properly into a DOM?
I am trying to insert a Node built from a String to a DOM.
Here is how I created the Node
Detail = "<Detail><Msg>Detail Message</Msg></Detail>";
prolog = "<?xml version="1.0" encoding="UTF-8"?>";
Node DetailNode = null;
Document DetailDoc = null;
if( Detail != null ){
Detail = prolog + BiometricDetail;
DetailDoc = xp.XML2DOM( BiometricDetail ); // transform a XML String into a DOM.
DetailNode = BiometricDetailDoc.getDocumentElement();
Here is how I created the DOM
javax.xml.parsers.DocumentBuilderFactory factory = javax.xml.parsers.DocumentBuilderFactory.newInstance();
javax.xml.parsers.DocumentBuilder builder = factory.newDocumentBuilder();
Document document = builder.newDocument();
Element beeE = document.createElement("BeeSets");
Element grpE = document.createElement("Group");
bioE.appendChild( grpE );
// the document looks like "<BeeSets><Group></Group><BeeSets>";
// After inserting the Node DetailNode, I want it to look like
// "<BeeSets><Group><Detail><Msg>Detail Message</Msg></Detail></Group><BeeSets>";
Now when I tried to insert the node DetailNode to the DOM document, I tried
1) document.importNode( DetailNode, true );
No exception was thrown. But when I transformed the DOM document back to a String, I could not see the information from the newly imported Node DetailNode.
When I tried
grpE.insertBefore( BiometricDetailNode, dataE );
I got the following exception.
org.w3c.dom.DOMException: WRONG_DOCUMENT_ERR: A node is used in a different document than the one that created it.
at org.apache.xerces.dom.ParentNode.internalInsertBefore(Unknown Source)
at org.apache.xerces.dom.ParentNode.insertBefore(Unknown Source)
at com.jadcs.bioidentity.role.base.RP.getNodes(RP.java:497)
2) document.adoptNode( DetailNode );
I got the following exception.
java.lang.ClassCastException: org.apache.xerces.dom.DocumentImpl
at org.apache.xerces.dom.DeferredTextImpl.synchronizeData(Unknown Source)
at org.apache.xerces.dom.NodeImpl.setOwnerDocument(Unknown Source)
at org.apache.xerces.dom.ParentNode.setOwnerDocument(Unknown Source)
at org.apache.xerces.dom.ElementImpl.setOwnerDocument(Unknown Source)
at org.apache.xerces.dom.ParentNode.setOwnerDocument(Unknown Source)
at org.apache.xerces.dom.ElementImpl.setOwnerDocument(Unknown Source)
at org.apache.xerces.dom.CoreDocumentImpl.adoptNode(Unknown Source)
at com.jadcs.bioidentity.role.base.RP.getNodes(RP.java:509)
3) detailStr = "<Detail><Msg>Detail Message</Msg></Detail>";
Element detailE = document.createElement("Detail");
detailE.setTextContent( detailStr );
grpE.appendChild( detailE );
This way gives result like "<BeeSets><Group><Detail><Detail><Flash>On</Flash></Detail></Detail></Group><BeeSets>";
The content is messed up.
Could someone help me out at how to insert a Node properly into a DOM? Thank you very much.Said another way, importNode actually only makes and returns a copy of the node you gave it (it will be a deep copy only if you pased true as the second parameter), but where the new dom you called import on is owner.
So what you need to do is more like this:
Node tempNode = domYouAreAddingTheNodeTo.importNode(node2copy,true); //true if you want a deep copy
domYouAreAddingTheNodeTo.appendNode(tempNode);You can also traverse to any point in the DOM and insert the node there with the same method, but you always have to import first so that the DOM has a copy of the node that it owns. -
hi i just got a 6th generation nano and im trying to transfer music from my old ipod which a 3rd generation ipod can someone help?plz thankz
There is no way to transfer ipod-to-ipod. Look for a 3rd party program, such as Yamipod, that will let you pull the music from your old iPod to your computer.
You really should be backing up your data on your computer. -
My MacBook Pro's screen had just gone white while working.Can someone help me out?
I am Using a MacBook Pro 13", While i was working my scree has just gone white. I tried restarting my MacBook. But still the screen is just showing a white color. Can someone help me out?
"However, at a LAN party a few months ago, a friend pointed out some issues with my screen on the left hand side."
So um..... you never saw these flaws until this friend pointed them out?
Apple Stores are not the only place to have Macs repaired. You can take your comp to your local AASP. First you should call AppleCare like the previous poster stated.
http://docs.info.apple.com/article.html?artnum=304398 How to find your nearest Apple Authorized Service Provider (AASP) -
i have dought if my iphone 4 will not work properly, as i heard it become slow after update ios7 , can someone help me out what to do.. ?
Hello there, morganbailey02.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro -
As stated above - I am having a really big problem with the iTunes 10.6 installer.
First tells me 2 DLL files are missing and then that a program needed for the install isn't there.
I never had a problem withiTunes last year when I had an iPad.
I deleted the iTunes from then because I found the iPad to heavy - I have very severe arthritis
in my wrists. I might as well send my iPhone back to the retailer I got it from if this issue can't be solved.
I'm using Windows XP Pro with SP3 so it should work.
Please can someone help?
Cheers
KnitWit46 in UKBOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect. -
yea, so my ipod has been doing fine ever since i got it. i only had one problem a while ago, but that was quickly fixed once i plugged my ipod into the computer. but now, these are my problems:
1) My ipod won't turn on (and no, the hold button is not on)
2) I can't plug my ipod into my laptop.
okay, what the heck? how am i suppose to fix anything if i can't plug my ipod into the computer. the usb cable is in, and i attached my ipod into the usb cable. usually, the ipod turns itself on before switching into charging mode. but my ipod nano won't even turn on!! can someone PLEASE help me out here? i tried all the trouble shooter stuff, so now i'm completely lost and upset.Welcome to Apple Discussions!
If your iPod is simply showing the "charging" message when connecting to the computer, it is obviously not connecting to the computer. You will need to put it into disk mode:
First, reset your iPod. Then put it into disk mode.
Try connecting it to your computer now. If a "Do Not Disconnect" message comes up, then that means your iPod is back to normal...at least part way.
Check out this article:
iPod won't turn on
Did that work? Post back if your iPod shows up in either iTunes, "My Computer", or in the iPod Updater.
I hope this helps
~~Kylene
Maybe you are looking for
-
How to include private reports in any page for a websheet application
Hi, i have created a websheet application, it has n number of data grids. For some data grids i had created reports, which got classified as private reports by default. i would like to display these reports in a page of my websheet application, when
-
How can i configure STMS with out physical systems
Dear Experts , please solve my doubts here i installed one system in AIX and named it as DEV system in that system i need to perform post-installaion Activities and i started some activities also presently my doubt is in STMS configuration here i hav
-
Hi, I've been struggling for days trying to figure out how to populate an XMLType field in Oracle 9i. I'm using the OracleThinDriver, WL 7.0, weblogic oracle extensions and a WL connection pool but to no avail. Has anyone done this? Is it possible? I
-
Patch 9239090 Worker Fails On Applying MSDODPCODE.sql
EBS Version - 12.1.2 - Suse Enterprise - 10 - SP2 DB - 11.2.0.3 - s390 - zLinux I am applying the 12.1.3 upgrade patch to our 12.1.2 instance and one worker fails with the following.... I've run this upgrade for testing purposes 4 time prior to this
-
When i download a video from camera roll onto my pc only the sound works but no picture
ive transfered plenty of videos from my camera roll onto my pc with no problem.but once i download them into a file there is no thumb picture and when i try playing on vlc,real player,quicktime i get no picture only sound.the only one what i can play