IPod Screen is frozen
this morning i plugged in my ipod and itunes was not reading it, so i unplugged while it said do not disconnect. I restarted my computer and itunes and plugged it in again. the ipod screen is frozen and it says do not disconnect and it says it is 7:36AM. (the time i was working on it)
please help me!!!!
Mine does this after every song played, and only does this since the update.
I've tried downgrading, but it doesn't downgrade the firmware, or updates the firmware after I downgrade.
A video will work for as long as the video lasts, but it freezes everytime on a song.
Similar Messages
-
my ipod screen is frozen....
Hello ayesham007,
What happens when you tried a reset? To do this, press and hold both the Select and Menu buttons together long enough for the Apple logo to appear. Don't be afraid to try this procedure more than once if no luck the first time.
If that doens't help, you may need to wait for your iPod's battery to drain.
B-rock -
ipod screen is frozen and the screen is stuck on the itunes symbol and usb cable and will not clear off when we tried to reset
The picture you describe is the subject of the Update and restore alert messages on iPhone, iPad, and iPod touch support article. There are troubleshooting suggestions there.
Hope that helps. -
Hey I have an ipod screen that has just the turning cog wheel (or this is what it looks like) frozen and not repsonding, any ideas
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also see here if needed...
iPhone and iPod touch: Frozen and unresponsive -
My ipod screen is frozen with yellow and grey on the screen how do i fix it???
I was listening to music and on facebook and all of a sudden my ipod went black and then got frozen on a yellow and grey screen and i have no clue what happened. This was a replaced ipod and now it isnt working the screen is staying on and it wont turn off. Any suggestions on how to fix this PLEASE feel free to answer. And if i connect it to the computer it does nothing, or when i press the lock or home button it just stays frozen. PLEASE HELP ME !!!!!!!!!!!
Let the battery fully drain. After charging for at least an hour try here:
iOS: Not responding or does not turn on
If not successful or the same screen reappers that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Ipod screen is frozen on 'connected'
I synced my ipod and then "ejected" it but left it attached to the computer in order to charge. I then disconnected the ipod and got a message saying: The disk was not properly ejected and now my ipod is frozen on the "Connected" screen (saying Eject before disconnecting) with the image of the usb cord and when I reattach it to the computer, my computer doesn't acknowledge the device. HELP!
Hi there,
You may just need to reset the device. Take a look a the article below for more information.
How to reset iPod
http://support.apple.com/kb/ht1320
-Griff W. -
HT201406 Ipod screen is frozen
Help! My son was playing a game on our Ipod touch when he thought he could down load a new game and instead he froze my screen.. Im taking it he was messing around in the itunes because the itunes logo is on my screen with a picture of a usb cord showing me to plug a usb cord in to itunes. I have held down my bottom button and nothing I can not turn off mt ipod because our top button got stuck last week and we tryed to get it unstuck and now it wont do anything as far as shutting down the ipod. Please can you tell me what I can do to get it working again.. I was going to just let the ipod die then hopefully when I got to charge it, it will reset and the itues logo will go away.. Thanks!
Try as (best you can):
- iOS: Not responding or does not turn on
When it says place the iPod in DFU mode use this program
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Ipod screen is frozen HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
it is stuck on the last thing i tried to play... when i connect it to my pc it says usb not recognized and the backlight and screen wont change.. this is a first...what do i have to do ?????
Hey devbob-
It doesn't matter (too much) what type of iPod it is.
All (current) iPod with display models reset pretty much the same way.
If it's an iPod that doesn't have a clickwheel, (1st, 2nd, or 3rd Gen models) it's menu & play instead of menu & select.
If it's a shuffle, you just turn it off, wait 5 seconds, and turn it back on
Thanks, though
CG -
my ipod is frozen or something. It won't slide to unlock or power off. I tried to drain the battery and shut it off with the wake and home button but it still doesn't work.
See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod touch is frozen... the screen has a picture of the itunes logo and a usb charger. I have held the sleep button and the power button to reset and i have let the battery die and started to recharge...niether worked. any ideas???
Try charing it to 50% at least.
If all else fails, try putting it in DFU mode. Connect it to iTunes, (iTunes may not detect the device, but that's ok) hold the power and home buttons down for 10 seconds, then release the power button but keep holding the home button until it goes into DFU mode. iTunes should detect it and ask for a restore.
~Lt. Leviathan -
My ipod touch has frozen with a white screen. The on/ff and sleep buttons will not work whether pressed for a moment or held for more than 10 seconds as per help pages. When connected to computer it is not recognised and no indication in "devices".It has been working perfectly from Christmas until now. Was watching a TV prog via BBC iplayer when the image and sound froze for about 5 seconds then just white screen. Help
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
My IPOD TOUCH is frozen with the Apple logo sitting there on the screen. I have already reset the ipod because it was freezing up so I reset it, but now it won't shut off or got o main screen it just sits with the logo on it. I can't turn it off. The screen will also flash as though it will turn off then goes back to the logo screen. Does anyone know what the heck is going on with my IPOD? It's reall frustrating me...ALOT!!!
- Try:
iOS: Not responding or does not turn on
- If not successful, let the battery fully drain. After charging for at least an hour try again
- If still not successful, time for an appointment at the Genius Bar of an Apple store. -
My sons ipod touch has frozen on a black screen with a waiting symbol rotating on it. We cant get it to turn on or off. When I tried to attach it to his itunes page we got the message "Cannot connect ipod error code OXE8000065". When I try to dio a search for the problem I keep getting told to resynch it but I cant!! Is this a common problem or do I need to send ipod back he has only had it 10 months
Did yu try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
This is first Ipod for me - I have had less than one day. Screen is frozen with itunes emblem and cable. Unable to refresh/restore or do anything with ipod. I turn off/on and get the same frozen screen. My computer does not recognize ipod. Itunes does not recognize ipod so I cannot restore.... Should I take this ipod back and get a new one? Is this normal?
Before you can use the iPod you have to activate it by connecting it to a computer with iTunes. Try the following to get your computer to see the iPod so you can activate the iPod.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
IT SEEMS LIKE MY IPOD 4GEN SCREEN IS FROZEN I RESTORED AND RE STARTED IT BUT EVERY TIME I TOUCH THE SCREEN TO UNLOCK IT OR SOMETHING IT WONT RESPOND SOMEONE HELP!! IT JUST STARTED DOING THIS A COUPLE OF DAYS AGO AND I DONT KNOW WHY ILL TRY TO SLIDE THE SLIDE BUTTON TO UNLOCK MY IPOD BUT IT WONT EVEN LET ME DO THAT ITS LIKE EVERY TIME I TOUCH THE SCREEN TO DO SOMETHING IT DOSENT RESPOND SOMEONE HELP PLEASE
Please don't shout.
Has the iPod ever been jailbroke?
Maybe you are looking for
-
Need help with a Table with one image in it.
I am attempting to design a site in Dreamweaver CS 4, I have Master Suite. I would like to use a header Logo already created in photoshop and made web ready in .jpg format. I am looking at inserting a single cell table across the top of page set at
-
Lost Installed Applications on E71 Memory Card
I lost the Installations on my E71 Memory Card and would like to restore them. Can any one help me? Things like Scaner and other stuff. Kayus
-
Can't get counter 2/3 working in simple event counting mode for NI6601
I have been successfully been able to get counter 0 and 1 working in a simple event counting mode. But when I read Software Save register for counter2/3 it gives me garbage values. I am doing register level programming in C. This is the algorithm tha
-
SPRUNCONVERSION and SPRUNCONSO
I experiment some troubles with the SPRUNCONVERSION and SPRUNCONSO stroreproc. SPRUNCONVERSION My time dimension is based on this structure : YYYY (level : year) |__SS (semester and level coded as quarter) |____QQ (quarter and level coded as month) W
-
Every cut I make in the sequence window leaves one remaining frame from its deleted neighbor clip. How do I turn off this feature - It is driving me mad.