I was charging my ipod on my bose dock and my ipod screen is frozen and im trying to turn it off my nothing is working.
my ipod screen is frozen....
Hello ayesham007,
What happens when you tried a reset? To do this, press and hold both the Select and Menu buttons together long enough for the Apple logo to appear. Don't be afraid to try this procedure more than once if no luck the first time.
If that doens't help, you may need to wait for your iPod's battery to drain.
B-rock
Similar Messages
-
I was trying to updat my software and now my iphone is frozen. I tried to turn it off but I dont think it turned off. Please Help!!!
Connect in recovery mode and restore, as described in this article:
If you can't update or restore your iOS device -
I tried to turn off my ipod after it started to slow down and freeze up on me and it went to the turn off slide screen, i slid the slide across to turn it off but then it went to the black load screen with the circle in the middle that indicates its loading and getting ready to turn off. well, its been stuck of that screen for over an hour and still is, i need help!
Try here:
iPhone and iPod touch: Frozen and unresponsive -
iPod 5g
iOS 8.1
I think it finished updating(can't be sure) but is still stuck on the 'connect to iTunes' screenMagically, my ipod touch opened this afternoon.
Through two weeks I tried several things like push power button for couple of minutes then push power and home button together for a couple of minutes. I replied this for a few times in a day. Also I put charge for 2 days after I firstly recognized my ipod is black out. But for a long time I didn't try charge for a long time (just half an hour etc.)
I put charge at morning today then when I came home at afternoon ( approximately 12-14 hours) my ipod touch was full charged and opened.
I promised that I will write my solution. I'm not sure this is a solution or not but my ipod touch is alive now. -
while i was charging my ipod a image of a wire and the itunes logo popped up..what do i do?
iPod touch User Guide (For iOS 5.1 Software)
-
After updating itunes software, i was charging my ipod nano (older version) and now it says it is disrupted and won't come on
Hi, Jennifer.
First, try resetting the device. The first article will walk you through this process. I am unsure which iPod nano you have so I will include the basic article. From there, select your version for troubleshooting steps.
How to reset iPod
http://support.apple.com/kb/HT1320
iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Hope that helps,
Jason H. -
I was charging my iPod and after charging for about 30 minutes I unplugged it. But now all it says is OK to disconnect. I have no idea what to do.
This is the ipod touch forum.
Try posting in the ipod nano forum. -
can anybody help me? i was charging my ipod touch and it was almost fully charged and it randomly shut off and will not turn back on, anybody know how to fix it?
Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Mac book pre suddenly got power off meanwhile it was fully charged. I tried to turn on but it's not working. I reconnected charger and the green light showing with blinking. How can I fix it?
cooldedar wrote:
I reconnected charger and the green light showing with blinking.
Well the blinking light shows it's charging, however just to make sure.
Reset the SMC, then connect the machine to a power source that doesn't have a lot of other power items on the same lines (in the walls) in the same room and see how it is in the morning.
For instance use a powerline in another spare room that isn't being used as much.
https://support.apple.com/kb/HT3964 -
I bought and was charged for bingo chips in bingo bash and have not received the chips.. I can't get a response from bingo bash! How do I get my chips?
Welcome to the Apple Support Communities
If I have understood you properly, to do that, you have to create a new administrator user with your name and for your uses. Follow these steps:
1. Open System Preferences > Users & Groups, and press the + button to create a new administrator account.
2. When you have finished creating that user, open > Log Out, and log in your new user.
3. Open System Preferences > Users & Groups, select the old user and press the - button to remove the user. If you want, you can select the option to remove the Home folder of this user, so you will only have the Home folder for your account -
I was charged for 240,000 coins in slotmania and did not receive that many
This is a customer support forum, Apple advisors will not address your concerns here. If you need assistance, visit the link below to contact support:
http://www.apple.com/support/itunes/contact/ -
I was charged for music that I unknowingly purchase, and haven't downloaded. Can I be credited for that purchase?
Click here and ask the iTunes Store staff for a refund.
(115268) -
Ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6
ipod 4 gen not working on bose dock and car dock since i update the ios 6.1.6?????
Have you went to Bose's support site?
Sometimes an iOS update breaks compatibility
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the Bose unit
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem then there is nothing you can do except see it Base has firmware update. -
ipod screen is frozen and the screen is stuck on the itunes symbol and usb cable and will not clear off when we tried to reset
The picture you describe is the subject of the Update and restore alert messages on iPhone, iPad, and iPod touch support article. There are troubleshooting suggestions there.
Hope that helps. -
My Ipod classic has frozen. Have tried pressing menu/centre button and resetting, but still won't work. Can anyone help please.
Helen y s wrote:
We have tried the usual restart a few times but with no success.
You mean that you have put the iPod's Hold switch on, then off, and then press-and-held both the Menu and the Select (centre) buttons together for at least ten seconds.
Have you made sure the iPod is charged?
If you have tried the Restat procedure (above) three times, have you then tried connecting the iPod to your iTunes Library?
Maybe you are looking for
-
Getting values from a table and concatenate them
Hi All, I think somebody out there should be able to help me. I have a list of contract numbers the user has to type in. I've created a table where user can add as many rows as needed. Each row is a contract number. Once completed, I have to concaten
-
Having trouble setting up the volume on my ipod...
when i put on the sound check on on my pod it really knocks the volume way down, and i find if i boost the volume to my music tracks in my itunes settings {even with sound check off} that a certain percentage of my volume control {roughly the last te
-
What program is needed to run itunes?
In attempting to gain some memory on my macbook pro I deleted some of the programs I did not believe I needed. In doing this I lost the program necessary to run my itunes. Can someone help me figure this out?
-
Difference between sap xi and xMII
Hi all, Can any body provide the information on SAP xMII and compare with SAP XI. Please help to find out scenario's based on the SAP XI and xMII.
-
Dbms_output.put_line problem..
We have created delete script to some 150 tables using cursors suppose we r deleting with some condition and use to display the output as dbms_output.put_line('Rows Deleted in the table distb_store_promo is '||SQL%ROWCOUNT); its shows error like it e