Ipod touch will not restore, only gives the apple logo...i have tried every trouble shot i can.. and keep getting the sme results.
ipod touch will not restore, only gives the apple logo....i have tried every trouble shot... and keep getting the same results.
Maybe here:
http://www.windowserrorhelps.com/itunes-error-11-how-can-i-fix-itunes-error-11-i nstantly
Is the iPod jailbroken?
Similar Messages
-
I have tried to reinstall the i Tunes app 3 times. Just get message of i tunes was improperly intalled. In order to burn cds need to reinstall. What other things can i try its very frustrating.
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain. -
My 4g ipod touch will not restore, what do i do?
my 4g ipod touch will not restore, i do what it tells me to do but it still won't restore, what can i do?
Try posting in the ipod touch forum.
-
My IPOD touch will not restore. It says "IPOD device cannot be found".
My IPOD Touch will not restore. It says, "IPOD device cannot be found".
- Try resetting the iPod;
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try placing the iPod in recovery mode and then retore. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Then try placing the iPod in DFU mode and then restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My ipod touch will not restore backup files, it gets to 4 mins then say error occurred (-1),I have restarted my pc but no joy.
I would next try restoring from backup.
-
Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard? Do I have to buy an Apple Keyboard to get it to work right out of the box?
Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to? -
when my lightroom opens up I keep getting an error message that states, "Lightroom encountered an error whne reading from its preview cache and needs to quit" I have relaunched it a number of times and keep getting the same message. Any thoughts on how to fix this?
You need to delete your preview cache and have Lightroom rebuild it. Cache location can be found here.
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic -
trying to download update for iTunes and keep getting the following An error occurred while installing the updates.(103
Try to download direct from here.
http://www.apple.com/itunes/download/ -
Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."
Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.
-
My ipod touch will not restore!!
my ipod touch will not turn on. When plugged into my laptop itunes tells me i must restore it, i do this and it tries to download the lastest software. when it reaches then end it tells me the restore was unsuccessful.. Please help!!
Did you try to connect in recovery mode, explained in this article? iOS: Unable to restore
-
I recently bought a new app on the iTunes store and, after being unable to install it, decided to restore my iPod Touch. I tried doing it with the options provided in iTunes only to find that my iPod can not be restored (error 1604). I've tried manually resetting it, but there doesn't seem to be anyway to do that. I'll it will do is show the Apple logo and then display the "Connect to iTunes" picture. When I do, it says that it must be restored. After preparing to restore, the computer announces this can not be done because of error 1604 and I'm right back at the beginning. Please help.
This is a USB problem. Since you have a Mac, restart your computer first and try it again before troubleshooting the problem.
From the KB article: (http://support.apple.com/kb/TS1275)
"Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
1. Connect iPhone to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
2. Restore and wait for error 1604.
3. When prompted click OK.
4. Close and re-open iTunes while iPhone remains connected.
5. iPhone should now be recognized in Recovery Mode again.
6. Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection." -
4th Gen iPod Touch will not restore or do anything!
I have a iPod Touch 4th Generation 64gb. One day, it restarted itself without input on my part. Now, it's showing the "Connect to iTunes" screen. When I connect it, iTunes says its found an iPod in Recovery Mode. When I click Restore, it downloads the latest update and goes through the process of restoring my iPod. However, when the iPod screen shows the loading bar under the Apple logo, the screen flashes white and restarts. Obviously, iTunes spits out Error 9 because of the loss of connection.
I've done everything from hard resets to entering DFU mode. NOTHING WORKS!
To include some extra info:
- It's out of warranty
- It's Black
- I've tried this on three ( 3 ) different PCs
Any help would be appreciated. And also, spitting back Apple support pages is NOT helping.DId you try this:
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
If you tried evetthing here then make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Ipod touch will not restore it get half way then freezes
ipod apps were unreponsive so i restored ipod now it will not restore how long should it take it has been restoring for 5 hours is half way and looks as if it has frozen ?
have a look @ this support article.
-
though I have sufficent memory space, and other internet based functions are running...
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
However, since it works with other networks that really suggests a problem with your network. -
My iPhone is frozen. It was working find about a hour ago and then for no reason the screen went to the apple logo. I have tried to reset it and that doesnt work. When I press the power/lock button and the center key it turns off but then it comes right back to the apple logo screen and wont go any further. Please help I dont have my stuff saved and would like to keep the stuff i do have on it!!! Every once in awhile the screen will go black for a few seconds then the apple logo pops right back up! I dont know what to do.....
Try to set it up as new device, explained here:
How to back up your data and set up as a new device
First without using the backup, in case it contains corrupt data.
If it works after that, use the backup to restore from.
Maybe you are looking for
-
Javascript or applet dropdown menus won't work in IE6, How can I solve this
I've made some dropdownmenu's of javascript and one of java applets. But they don't work in IE6. If IE6 is installed they won't work either. My friend has IE5.5 and he has no problems with the menus. How can you make them work. And how can you change
-
My new Mac Air continues to disconnect from WiFi after going to sleep. When waking it up I have to manually re-connect. How do I keep it connected?
-
Question for install repository on RAC environment
hi all, Our RAC has two nodes: node1(primary) and node2. Each node has two database instances: odsstag and ods. I've finished with odsstag, and now I am testing on ods. I create a new repository owner on node1.ods, and get node2.ods registered via re
-
Illustrator is Automatically Embedding my Linked Images
Is there some sort of "Auto Embed" feature that will embed your linked images? I have a document that is embedding most of the linked images. It's not happening in all my documents, just one
-
Synchronous interface udf to remember value between request and response
Hello, I have two synchronous message interfaces bundled in an operation mapping and a message mapping for the request and one for the response. I need to remember a value obtained during request message mapping so that I can access it in the respons