IPod will not start or reset, plugging in makes apple logo flash on and off

My friend's iPod nano 3G won't turn on. In fact it won't do anything - I can't even reset it. When plugged it, it flashes the apple logo every 1.7 - 1.8 seconds. Suggestions?

I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all.
I called Support and the automated phone person gave me these steps:
1. Plug the iPod into the computer
2. Set it down on a flat surface
3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!!

Similar Messages

  • IBook will not start up past gray screen w/ apple logo

    iBook will not start up past gray screen w/ apple logo. So I have zeroed out the hard drive and reinstalled tiger. No change except if I start up holding shift it will boot and welcome comes up then black screen that says you must restart by holding down power key.
    Zeroed out the HD again with same results. Also I have a iBook G3 with the same symptoms.

    What you are experiencing is a kernel panic.
    Try starting up from the Mac OS X Install Disc by inserting the disc and restarting your computer, holding down the C key as the startup chime is ending. Then choose Installer > Open Disk Utility (in Panther) or (in Tiger) click 'Next' at the language screen and choose Utilities > Disk Utility and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive.
    Once you have repaired the hard drive with the Install disc's Disk Utility, then try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
    Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
    See if a little hard drive maintenance helps things out.

  • When i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. how can i stop it and turn on my ipod??????

    when i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. before this it wouldn't turn on unless it was plugged in.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My macbook pro will not  start up. I get the apple logo and the little  start up waiting avitar. I tried everything including starting with my back up drive and nothing happens.

    My macbook pro mid 2012 will not start up. I was running bitdefender and when I went to see if it was done, I had the apple logo and the loading (winding circle) on the screen. I can not get out of this. I used my back up external drive and it did nothing. It did light up.

    samnleosgpa,
    you may have faulty RAM. Are you able to boot into your MacBook Pro’s Apple Hardware Test (“AHT”)? If so, try running it to see if it can detect a problem. If you’re not able to run its AHT, and you’ve upgraded your MacBook Pro’s RAM before, try reïnstalling its original RAM and see if you can get past the “-6002F” error code. If you aren’t able to run its AHT, and you haven’t upgraded its RAM or you no longer have its original RAM, then I’d recommend that you make an appointment at your nearest Apple store to have them diagnose the problem.

  • My iPhone 5 will not start it just turns on to apple logo and goes to dark blue screen.

    How do I turn on ?

    Hi Chuyy76,
    From your post I see that your iPhone will not boot past the Apple logo.  There are troubleshooting steps I'd like you to follow through, which can be found in the article linked to below.
    iOS: Not responding or does not turn on - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • HT201263 ipod touch cannot turn off or on apple logo flashes on and off

    i have the first ipod touch and it is flashing the apple logo. it will not power off or on. it is stuck in this mode. I have tried pressing both buttons for 10 seconds. It will not respond when plugged into itunes either.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod will not charge. it only goes to the apple logo for a few minutes, then turns off.

       P  L  E  A  S  E
       H  ELP

    Did you try a hard reset? Hold the On button and the Home button until it powers down but continue to hold until it begins to power up again. See if that brings any success.

  • I pod touch will not start or reset

    I have an I pod touch which will not start at all. I have tried 2 different chargers and to no avail. The screen does nothing at all.........just black.
    I cannot reset it as the red band does not appear.
    As far as I know, the battery is probably discharged, although I have tried to charge it up in an attempt to get it to turn on.
    I would appreciate any help as I am reluctant to just throw away a piece of kit that is barely 2 years old!
    Thanks all.
    Clive

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My Ipod will not start but keeps giving a clicking sound like its trying...

    Please help my Ipod will not start, it keeps sounding like a car that is tyring to start but those not really gets enough power to do so.pls whatt can i do to resolve this.
    thanks

    See if this helps
    http://discussions.apple.com/thread.jspa?threadID=1591975&tstart=0

  • My iTunes will not start.  The box on the error message APSDaemon.exe,  And message says "This application failed to start because MSVC80.dll was not found.  Reinstalling may fix."  I did the reinstall and I get the same error.

    My iTunes will not start.  The box on the error message APSDaemon.exe,  And message says "This application failed to start because MSVC80.dll was not found.  Reinstalling may fix."  I did the reinstall and I get the same error.  The error first happened after I approved the an iTurns update.

    Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
    1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
    2) Restarted computer and still got error message
    3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
    4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
    5) Restarted computer.
    6) Re-installed itunes from apple website
    No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

  • Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing.  Then another box indicates "Error 7 (Windows error 126).  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing".  Then another box indicates "Error 7 (Windows error 126)".  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • HT3964 My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

    My mac book pro 2.3ghz intel core i7 will not start up. I get the apple and the circle thing but thats it. Please help!!!

    Give this a try:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Ipod classic try to start but the apple just flashes on and off.

    Ipod classic I try to start but the apple just flashes on and off.
    I can't reset and it doesn't show it charging. Not recognized by computer. 
    It was working just fine in my car, I stopped for an hour, and when I came back it just started the flashing thing.
    Anyone have any ideas?

    Reset it this way.
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If it is  still not working.
    Then Restore it using iTunes
    Good Luck!

  • Ipod Nano will not Start unless resetted  everytime

    Hello Nano world'
    My Nano just started to act strange
    One night I fell asleep with the Nano on (with the sleep timer set to 60 minutes) I had just charged it via the computer USB. I woke up the next morning and tried to turn it on ... No luck.
    Tried to reset (center button +menu) apple logo came on worked fine
    I turned it off. Tried turning on no luck again...
    Tried reset ..came on again only stayed on for a few minutes (battery icon showed more than 3/4 green)
    Couldn't turn on again ... tried reset but this time instead of apple icon ,it showed battery with ! mark
    Is it possible that the USB charger doesnt have quite the power to fully charge the Nano?
    So in short the only way to turn on is by the reset method
    and some times it shows the battery ! icon
    PS did the latest update on the nano and did a factory reset
    Thanks
    Athlon   Windows XP Pro  
    Athlon   Windows XP Pro  

    Hi
    Thanks for the quick reply
    I went out and bought i Ipod AC charger thinking that it might be the USB port not supplying enough power
    First I plugged it in the charger Everything seemed normal at this point The charging icon appeared .. I could turn it off and on like normal(holding the play/pause button.
    I went away for about 10 minutes. Tried turning it on normally ,, didn't work.. tried a reset (center button+menu) now it won't even turn on at all
    The only wierd thing that comes to mind when it was working for the short time is that I tried setting the clock several times; it would set itself back to 1:55 AM after about 5 tries
    I am really starting to lose faith in this product
    I used to have a BenQ MP3 player never one problem
    This is the 4th Nano that I have gone through
    Hope I can get this resolved
    Thanks
    Norm
    Athlon   Windows XP Pro  
    Athlon   Windows XP Pro  
    Athlon   Windows XP Pro  

  • Ipod will not charge, keeps resetting, extremely low battery.

    Someone please help!!
    I adore my Ipod, its 2+, it was working fine, till a few months ago.
    In the beginning, it stopped charging on the computer, it synced, but i would have to charge in on a Ipod radio thing first.
    Then after awhile, on the radio, (it worked perfectly at first) the ipod would come up with the message, "This accessory not supported by Ipod", it would still play on it, movies, songs, and charge it, but the message would come up every often.
    Now it refused to be recognized by the radio, and won't charge.
    (yet if you press play the song and movies will play)
    It had very little battery left so i bought a wall charger.
    I tried charging with a wall charger and car charger!
    Now its basically dead, and when i plug it on to the wall charger, the apple logo comes on, and it goes to low battery message, then apple logo..again again.
    It just keeps resetting, so i took it off that.
    Leaving on the charger for awhile won't work, because it just keeps doing that.
    What do i do?
    I can't restore it, because i'd have to charge it first!
    (I got a new battery for it a few weeks ago, the battery life was way better, charged a bit faster, and it seemed to work better, but the computer still drained it)
    Anybody have any ideas?
    Please please please.
    I swear i love it, but i'm going to throw it out the window soon.
    -edit,
    just to add, the first thing that went wrong, that started this thing, was when i got that -48 error, it doesn't do that anymore just to add
    Message was edited by: Imjustkeeding

    I have the same problem and sent my ipod to a the service center for a battery replacement. I was informed by them first by email that "Our technicians have performed full diagnostic checks on your IPOD 5TH GENERATION and have been unable to reproduce the symptom(s) you reported when you requested the repair. As a result of our tests, we can confirm that your product meets Apple specifications for performance, usability, and functionality." then I was told over the phone that they reloaded the software and firmware and that it is working properly and is being sent back to me. Then, and heres the kicker, I received my i pod back with a form stating it was a hardware failure affecting another component. I have since called multiple times and no one can tell me where the hardware failure is but the ipod still says its a battery issue. Go figure i think apple knows exactly what the faulty part is that is causing this error and has no solution short of replacing the unit and they dont want to replace the units of all those with this hardware failure

Maybe you are looking for

  • How to connect my Satellite L300 to the TV?

    Hi... I have a Toshiba Satellite L300-2C4 and wish to connect it to my Toshiba 32HV10E plazma The tv have a hdmi input, so I bought VGA adaptor and connect it to the computer Unfortunately it doesnt work. The computer can recognise the tv but not the

  • Is there a way to create a link label on the export dialog

    Hello, Is there a way to create a link label on the export dialog? For example : Click here for more info I would like to have the "here" as a link label to open a html page Thanks

  • Query security settings for users

    Hi again. I'm looking for a way of querying security settings for a user. ie I understand that company/division etc security is implemented through responsibilities. In which case, is there a way to retrieve those exclusions per user? (eg User 1 cant

  • HELP - Website isn't working for me but working for everybody else

    Hey I'm new to this site so I'm sorry if this is in the wrong section! So I've been getting annoyed lately because my website (www.curtiskeay.com) isn't working for me and just redirecting me back to my hosting website saying that the website is 'com

  • Error: columns are not equal when writeback data from Essbase to Oracle

    I got an error when writeback Budget data from Essbase to Oracle that: The number of columns returned by script [14] is less than the source data columns exposed [15] while my returned columns from script is 15 My report script: <Sym {MISSINGTEXT ""}