%IPRT-3-RIB_LOOP: Resolution loop formed by routes in RIB

Does someone know how to debug this error message please?
%IPRT-3-RIB_LOOP: Resolution loop formed by routes in RIB
This error message spread everywhere inside my network.
thanks!!

Hello Vincent,
This error mean that RIB route producers have installed routes in the RIB that form a loop during resolution. But, there could be several reasons for this. For. eg: a route received from a neighboring device and being installed in the RIB that conflicted with an already known/installed path.
When were these logs observed? Are there any other logs alongside this which can shed some more light on the actual problem. The supporting logs can tell which component is triggering this (like CEF discovering the routing for a prefix has recursive paths that lead back to itself). These logs are merely symptoms.
"show log" and "show ip route loops" will be good to have to start with!
Regards,
Imran

Similar Messages

  • Using drop down list to set values in looped form

    I've got a form which loops through (currently) 10 copies of an input form for assets
    <form>
    <input name="assetModel[1]" type="text">
    <input name="assetSerial[1]" type="text">
    <cfselect name="assetRoom[1]">
    <input name="assetModel[2]" type="text">
    <input name="assetSerial[2]" type="text">
    <cfselect name="assetRoom[2]">
    <input name="assetModel[3]" type="text">
    <input name="assetSerial[3]" type="text">
    <cfselect name="assetRoom[3]">
    </form>
    I'm after a way to be able to set assetModel[all] = "51" (which shouldn't be too difficult) but also to set [1] = 46, [2]=35, [3]=42 etc.
    Current thinking is that I want to have a drop down box where I can select my all options and another to set where I want to copy the list of assets from another room as default values on this form.
    There are approx 20 fields on each iteration of the field and I'll probably have about 10 fields at the top to set the values I'm after some ofthese affecting multiple form fields.
    Thanks
    Mi-ul

    I've got a form which loops through (currently) 10 copies of an input form for assets
    <form>
    <input name="assetModel[1]" type="text">
    <input name="assetSerial[1]" type="text">
    <cfselect name="assetRoom[1]">
    <input name="assetModel[2]" type="text">
    <input name="assetSerial[2]" type="text">
    <cfselect name="assetRoom[2]">
    <input name="assetModel[3]" type="text">
    <input name="assetSerial[3]" type="text">
    <cfselect name="assetRoom[3]">
    </form>
    I'm after a way to be able to set assetModel[all] = "51" (which shouldn't be too difficult) but also to set [1] = 46, [2]=35, [3]=42 etc.
    Current thinking is that I want to have a drop down box where I can select my all options and another to set where I want to copy the list of assets from another room as default values on this form.
    There are approx 20 fields on each iteration of the field and I'll probably have about 10 fields at the top to set the values I'm after some ofthese affecting multiple form fields.
    Thanks
    Mi-ul

  • Forms central routing

    I want to create a form and send it via email to people that can be selected from a drop down list in the form. Can I do this with a paid subscription?

    We currently don't support routing of the form.
    Randy

  • Looping form items

    I am trying to loop in a cfform type = flash area. I have a
    drop down that when a user selects a number in it, i need the page
    to display that number of form elements.
    similar to looping 5 times over a text field so it displays 5
    text boxes.
    actionscript, repeater, cfloop,? what should i use
    any help?

    yeah actionscript would be your best bet. As Ian says, your
    page isnt going back to the server so CF wont have a clue the
    user's made a change. Should be fairly simple to do with
    ActionScript - haven't touched it in years though myself. Should be
    some easy tutes on looping in AS floating about.
    Javascript could probably do it too, but I would expect you'd
    probably take 10x longer to do it that way than with actionscript -
    passing variables out to the rendered html page then back in again
    etc. messy.

  • Loop form variables with GET !

    Hi all !
    I need to retrieve all the variable names that are used in
    the form.
    Though i was able to retrieve the variable names of from the
    form using the POST method , but i am unable to get it using the
    GET Method.
    Here is the code
    The above code works for the POST method only..
    When i change the form action to GET , it does not display
    anything.
    Thanks for ur time.

    With POST, the variables are accessible in ColdFusion as
    FORM.variablename.
    With GET, the variables are accessible in ColdFusion as
    URL.variablename.

  • Routing loop when tracing to remote ip address on vpn concentrator

    When I try and ping a remote address on my vpn 3000 concentrator I get ttl exceded. When I try and tracert from my workstation to the remote address on my vpn 3000 I see a loop.
    Tracing route to x.3.17.145
    over a maximum of 30 hops:
    1    29 ms    31 ms    28 ms  172.4.0.20
      2    32 ms    30 ms    29 ms  172.4.0.25
      3    38 ms    29 ms    31 ms  172.3.0.21
      4    33 ms    30 ms    32 ms  172.4.0.25
      5    32 ms    49 ms    27 ms  172.3.0.21
      6    35 ms    30 ms    38 ms  172.4.0.25
      7    31 ms    28 ms    28 ms  172.3.0.21
       8    28 ms    28 ms    42 ms  172.4.0.25
      9    38 ms    27 ms    32 ms  172.3.0.21
    10    35 ms    28 ms    36 ms  172.4.0.25
    11    35 ms    27 ms    28 ms  172.3.0.21
    12    30 ms    28 ms    28 ms  172.4.0.25
    13    39 ms    30 ms    43 ms  172.3.0.21
    14    48 ms    28 ms    29 ms  172.4.0.25
    15    36 ms    28 ms    34 ms  172.3.0.21
    16    39 ms    39 ms    56 ms  172.4.0.25
    17    42 ms    38 ms    47 ms  172.3.0.21
    18    35 ms    39 ms    41 ms  172.4.0.25
    19    49 ms    32 ms    29 ms  172.3.0.21
    20    32 ms    28 ms    29 ms  172.4.0.25
    21    28 ms    43 ms    30 ms  172.3.0.21
    22    37 ms    32 ms    34 ms  172.4.0.25
    23    29 ms    31 ms    32 ms  172.3.0.21
    24    29 ms    33 ms    31 ms  172.4.0.25
    25    32 ms    41 ms    43 ms  172.3.0.21
    26    43 ms    29 ms    39 ms  172.4.0.25
    27    47 ms    33 ms    31 ms  172.3.0.21
    28    37 ms    29 ms    35 ms  172.4.0.25
    29    44 ms    30 ms    91 ms  172.3.0.21
    30    31 ms    41 ms    50 ms  172.4.0.25
    172.3.0.21 is my private interface on the vpn 3000.
    172.4.0.20 is my public interface on the vpn 3000.
    172.4.0.25 is the default gateway / router interface on my router.
    interface GigabitEthernet1/1/0.1
    description connected to LAN
    encapsulation dot1Q 1 native
    ip address 10.3.0.25 255.255.255.0
    interface GigabitEthernet0/0.4
    description vpn 3000 concentratorconnection
    encapsulation dot1Q 4
    ip address 10.4.0.25 255.255.255.0
    172.3.0.21 has a no default gateway on the vpn conentrator.
    172.3.0.21 has a default gateway 172.4.0.25  on the vpn concentrator.

    Hi John
    could you clarify where you are pinging from and where you are pinging to please?
    From the LAN to a destination across a VPN tunnel?
    Or from a source across the VPN tunnel to a host on the concentrator's LAN?
    Or from a source across the VPN tunnel to a host on the Internet?
    I suppose your last line has a typo, it should be
    172.4.0.21 has a default gateway 172.4.0.25  on the vpn concentrator.
    right?
    Apart from the default gateway are there any other static routes configured on the vpn3k and the router? No dynamic routing protocol?
    tnx
    Herbert

  • How to pass and receive an array from a form.

    For example, now i want to input my students achievement of an exam.
    I should input tow fields of data of every student: studentID,achievement.
    And i want to post a few of records each time (eg 10 records).
    So i should use an array data[10][2] to store 10 records each.
    But i don't know how to write it in HTML form. should i use the same name in all the ten <input> fields? or should i do as below:
    <form method = "post" ....>
    <input type = "text" name = "studentID[0][0]"></input>
    <input type = "text" name = "achievement[0][1]"></input>
    <input type = "text" name = "studentID[9][0]"></input>
    <input type = "text" name = "achievement[9][1]"></input>
    </form>
    And how can i receive this array using JSP or JSTL or Servlet?
    Can u give me an simple example?

    I think this will be usefull to you. If ok convert it for 2 dimensional array in the loop
    <form>
    <%
            for(int i=1;i<=10;i++)
    %>
            <input type="text" name="student[<%=i%>]"/>
    <%
    %>
    </form>

  • Drop-Down List Box on Form Is Cleared at Each Step in a Workflow Process

    Hello users,
    I am posting this in the Workflow Designer, Workflow Server and Form Designer forums so that it gets a little more exposure, so I apologize if you receive this more than once.
    I have a Form Designer 5.0 form attached to a Workflow Server 6.1 process. On the form, I have a drop-down list box being populated from a text box by the OnDataLoad event on the form ONLY when the process is first initiated. The text box is populated by the OnAssign event of the first step in the process map. When the task initiator submits the form to the second step in the process and the user opens the form, the drop-down list box is no longer populated - it has been cleared. There is no code anywhere in either the form or in the process map that clears this field.
    Can anyone tell me why this is happening? Is it a bug?
    Thanks.

    Unless you hard coded the list box on design time, it will lose all data when the form is routed.
    Only solution to this is:
    create a text box and store your list box choice list to the text box before submitting your form and import the list box choice list back from the text box on form ready.
    Hope this helps.

  • Send email to a list of users in the form

    Hello,
    I have a simple process that the user fill and submit the form  to route to the manager for approval. The form does contain a list of names on it and I would like to send email to these names and I've tried the Find Users or Send Email but it does not work.
    Can any one please advise on how to get this done.
    Thanks in advance,
    HD

    Hi Aayush,
    Thanks for the helpful tips. However, I tried to apply the same technique to LC ES version and it does not seem to like the part of concatenate the email and the process keep stalling with the below error.
    [5/1/13 14:50:05:761 CDT] 0000017e AWS           E com.adobe.workflow.engine.ProcessEngineBMTBean stallAction stalling action-instance: 130789 with message: Expected one of '.', '..', '@', '*', <QName>: org.jaxen.XPathSyntaxException: Expected one of '.', '..', '@', '*', <QName>
    Can you provide some more advises.
    Thanks,
    HD

  • Use data input form in workflow

    Greetings,
    I need to input some fixed asset information from FI-AA master data in a data input form and route through a workflow process before finally update the asset master data. Does anyone does something similar before? Is it technically possible? Is there any guide available here.
    Thanks
    Steve

    Hi,
    you can put several table controls / alv grids on one dynpro.
    find example in :
    SE38 - environment - reuse library
    Andreas

  • HCM Processes & Forms without Employee Selection

    We would like to develop a Job Requisition Process using HCMPF.  A Job Requisition does not require an employee selection. The Start Process in the portal begins with the selection of an employee.  I know that the ability to skip employee selection in the Start Process is delivered with EHP4 but we are going to be doing this development with EHP3.  I read in an SDN blog that via configuration you can set a process to "skip selection". In this way, the process actually jumps right to the form screen as if it was in an "edit" task. Would this be a solution for us? Is the configuration done somewhere in the process definition in the ECC System?  Does the process still require an employee selection at the end of the process to complete it? We have heard that an HCM process does not have to do updates, but can just be a fill-in of a form and routing for approvals. I need help understanding how to initiate this type of process when no employee selection is needed.

    Hi Joyce,
    Did you manage to resolve this? We have a similar requirement and are on EnP 3 as well. Is this something that you were able to achieve?
    Thanks.
    Regards,
    Akshay

  • Guided Procedures and online interactive adobe forms.

    Hi Experts,
    Scenario : User have to log into GP runtime, When he clicks the first action it should display the adobe form. He  has to fill the details and submit the form. This form is routed for Approver 1 for review. The first approver will log into portal,view it (UWL),approve it and sent for second approver.The same process happens with the second approver.After both approvals, a BAPI updates the data in the interactive form in R/3
    All the process have to be done in Guided Procedures, then  integrated with Portal at the end.
    We have tried creating an Wdynpro Java app with online adobe form and executed successfuly in NWDS and also in Webdynpro content administrator.
    issue:-
    When we create a callable object(webdynpro app(gp interface CO)) in GP and test, we were unable to view the form.
    Now our question is : what are we mising ?
    Is it possible to integrate online interactive adobe form with guided procedures?
    Is our approach to solve the scenario right?
    any links or tutorials will be greatly appreciated
    TIA,

    Hi
    See the following Link: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f&overridelayout=true]
    Kind Regards
    Mukesh

  • Forms 6i and Apache server

    HI all,
    I have an assignment to replicate production installation to another environment on another server. Currently what is installed on those servers is:
    - Main server (production): Windows server 2000 SP4, Forms 6i service, Reports 6i service , iSuites HTTP listener. In some documents I found that 9i Rel1 Applications Server was actually installed creating Forms60service, Reports60service and HTTP listener. Unfortunately, I don't have access to 9i Rel1 disks (only 9i Rel2 and Forms6i Rel2) and since it is desupported, I can't download them online.
    - Other server: Windows Server 2003 ( with installed Forms 10g and services disabled).
    What I did was install Forms6i server and Apache web server. Apache server works, and I made aliases so it can access files on the server. Aliases were taken from documentation of production installation. However, I don't know how to make Apache listen for forms server requests. I assume in 9i it is handled automatically, like in 10g?
    Questions:
    -Does 9i Rel1 create those services? I'm new to 9i and 6i AS, and don't have disks to test it. Is there a way to download 9i Rel1?
    -How can Apache be configured to handle requests to Forms server? Its now listening on port 81, and when called gives a blank page. JInitiator isn't started.
    Any help would be greatly appreciated.

    If you are using a standalone Apache install and not the one included with iAS 1.0.2, you must run the Forms Server. If you are using the iAS installation, you can use either the Forms Server or the Forms Servlet. The Forms Servlet takes advantage of JServ, which allows requests from Forms to route on the same port by which the HTTP listener is using. On the other hand, if you don't use the Servlet and instead use the Forms Server, requests from the client are routed from the client directly to the Forms Server on a different port. In this case the HTTP Server is only used for the initial request which then pass future requests to the server. The down side to this is that you must run 2 servers and have 2 available ports - one for the http listener and one for Forms. This is why using the Servlet is preferred.
    I believe you must be using Forms 6i Release 2 (6.0.8.11) plus patch 10 or 11 or newer in order to successfully deploy using Servlet. This translates into being iAS 1.0.2.2.2 if I recall correctly.
    Here are some doc references which may be of help:
    http://www.oracle.com/technetwork/developer-tools/forms/documentation/techlisting-084882.html
    http://www.oracle.com/technetwork/documentation/6i-forms-084462.html
    http://www.oracle.com/technetwork/documentation/forms-094534.html
    http://www.oracle.com/technetwork/documentation/dev-arch-093406.html

  • How to use Linksys router as bridge?

    I am trying to extend the wifi signal by using another router as bridge
    Source router is Netgear N150 b/g/n and here are the settings
    IP 192.168.254.1
    Subnet mask 255.255.255.0
    Default Gateway 192.160.254.254
    Channel number is on auto
    I have a Ubuquiti antenna
    Here is the webpage for the antenna
    http://www.amazon.com/gp/product/B004EGI3CI/ref=oh_aui_...
    I connected Linksys E900 router to this antenna and then another cable is connecting the router to my laptop
    To access antenna settings I typed 192.168.1.20 and accessed the antenna settings I chosed bridge option
    Then accessed internet explorer typed in 192.168.1.1 for linksys router settings
    Here is the linksys settings
    IP 192.168.1.43
    Subnet mask 255.255.255.0
    Default Gateway 192.168.1.1
    Channel number is on auto
    I choosed the channel number different than the one from the original signal and chose bridge as option
    While it was connected I tried to surf the net but it did not work
    I unplugged it form the router and checked the wifi signals and saw my wifi signal very strong 
    But tried to connect but it says can not connect
    Can someone help me?.
    Is default gateway supposed to be the same in main router and the bridge router and the antenna?

    You need to verify with the e900 that it actually has the Bridge mode feature, it it does not, the only other thing you can do is to run it in wired AP mode:
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=169333b784cf4c78b8db5490f85c518a_Setting_.xml&pid=...
    http://www.northshore-it.com/tips/how-tos/cascade_linksys/#LAN_to_LAN
    If you you an actual bridge mode feature, and the e900 will not work, I suggested reviewing this as an alternative:
    http://store.linksys.com/products/linksys-entertainment_bridges_stcVVcatId554254VVviewcat.htm

  • Routing not Exchanged

    Morning all,
    I have two rev D MI424WR routers connected to one another via LAN Coax. I can obtain NTP successfully from the router that has the broadband connection, however the secondary router says its still waiting forresponse from NTP server. This tells me that routing between the two is not working properly, as the secondary router should be able to send traffic to the primary router, and then it would be passed out to the Internet.
    Do I need to configure the secondary router to allow for routing information to be exchanged successfully?
    Thanks,
    Steve
    Solved!
    Go to Solution.

    Here's how I see this issue. If the second router is able to allow other devices to transfer data across the network via the main router, there isn't anything wrong with the second router. I don't know how the ActionTec is set up when it comes down to NTP, and if it spends time trying to find other routes to an NTP server but I'm pretty sure this is just a problem due to the fact that it might be trying to use the MoCa WAN or Ethernet WAN port to search for an NTP server. Since those interfaces (OS-wise) are clearly down and that router technically isn't holding any sort of IP address besides it's own, the process is ultimately failing. I've seen it happen on many routers repurposed as access points/switches that attempt to search for NTP servers over the WAN Port.
    You'll want to try messing with static routes to allow only the second router to reach an NTP server if at all possible, while having the second router not perform any form of routing function. Something like telling localhost traffic to go out on whichever interface the router is connected to the main network, and tying in information such as IP and Subnet mask of where it needs to go might work.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

Maybe you are looking for