IPS Interface duplex - Half/Full??

i have a IPS 4260, running Version 6.0(5)E2.
I have noticed different duplex on the interface.
My understanding based on the logs below:
The interface below seems to be running in half duplex, but they are configured for full duplex.
-GigabitEthernet2/0
-GigabitEthernet2/3
-GigabitEthernet3/3
Is there any misconfiguration or a problem on my IPS?
extract from "show tech-support" command:
MAC statistics from interface GigabitEthernet2/0
Link Status = Up
Link Speed = 100
Link Duplex = Half
MAC statistics from interface GigabitEthernet2/1
Link Status = Up
Link Speed = 100
Link Duplex = Full
MAC statistics from interface GigabitEthernet2/2
Link Status = Up
Link Speed = 100
Link Duplex = Full
MAC statistics from interface GigabitEthernet2/3
Link Status = Up
Link Speed = 100
Link Duplex = Half
MAC statistics from interface GigabitEthernet3/0
Link Status = Down
Link Speed = N/A
Link Duplex = N/A
MAC statistics from interface GigabitEthernet3/1
Link Status = Down
Link Speed = N/A
Link Duplex = N/A
MAC statistics from interface GigabitEthernet3/2
Link Status = Up
Link Speed = 100
Link Duplex = Full
MAC statistics from interface GigabitEthernet3/3
Link Status = Up
Link Speed = 100
Link Duplex = Half
Oct 29 18:40:04 sensor user.info kernel: e1000: ge2_0 NIC Link is Down
Oct 29 18:40:07 sensor user.info kernel: e1000: ge2_0 NIC Link is Up 100 Mbps Half Duplex
Oct 29 18:40:08 sensor user.info kernel: e1000: ge2_0 NIC Link is Down
Oct 29 18:40:08 sensor user.info kernel: e1000: ge2_1 NIC Link is Down
Oct 29 18:40:15 sensor user.info kernel: e1000: ge2_1 NIC Link is Up 100 Mbps Full Duplex
Oct 29 18:40:37 sensor user.info kernel: e1000: ge2_0 NIC Link is Up 100 Mbps Half Duplex
Oct 29 18:40:37 sensor user.info kernel: e1000: ge2_0 NIC Link is Down
Oct 29 18:40:37 sensor user.info kernel: e1000: ge2_1 NIC Link is Down
Oct 29 18:40:37 sensor user.info kernel: e1000: ge2_1 NIC Link is Up 100 Mbps Full Duplex
Oct 29 18:40:40 sensor user.info kernel: e1000: ge2_0 NIC Link is Up 100 Mbps Half Duplex
Oct 29 18:40:43 sensor user.info kernel: e1000: ge2_0 NIC Link is Down
Oct 29 18:40:43 sensor user.info kernel: e1000: ge2_1 NIC Link is Down
Oct 29 18:40:43 sensor user.info kernel: e1000: ge2_1 NIC Link is Up 100 Mbps Full Duplex
Oct 29 18:40:43 sensor user.debug kernel: Set Affinity to 1
Oct 29 18:42:48 sensor user.info kernel: e1000: ge2_0 NIC Link is Up 100 Mbps Half Duplex
Oct 29 18:42:48 sensor user.info kernel: e1000: ge2_0 NIC Link is Down
Oct 29 18:42:48 sensor user.info kernel: e1000: ge2_1 NIC Link is Down
Oct 29 18:42:48 sensor user.info kernel: e1000: ge2_1 NIC Link is Up 100 Mbps Full Duplex
Oct 29 18:42:49 sensor user.info kernel: e1000: ge2_0 NIC Link is Up 100 Mbps Full Duplex
Oct 29 18:42:49 sensor user.debug kernel: Set Affinity to 1
Oct 29 18:42:49 sensor user.info kernel: e1000: ge2_0 NIC Link is Down
Oct 29 18:43:10 sensor user.info kernel: e1000: ge2_2 NIC Link is Up 100 Mbps Half Duplex
Oct 29 18:43:10 sensor user.info kernel: e1000: ge2_3 NIC Link is Down
Oct 29 18:43:10 sensor user.info kernel: e1000: ge2_2 NIC Link is Down
Oct 29 18:43:10 sensor user.info kernel: e1000: ge2_3 NIC Link is Up 100 Mbps Half Duplex
Physical Config
ID Name Pair Logic Reset Admin Speed Duplex Mode
0 ge0_1 0 0 n/a down Auto Auto Prom
1 ge3_1 2 19 n/a up Auto Auto Pair (HW Bypass)
2 ge3_0 1 19 n/a up Auto Auto Pair (HW Bypass)
3 ge3_3 4 17 n/a up 100 Full Pair
4 ge3_2 3 17 n/a up 100 Full Pair
5 ge2_1 6 18 n/a up 100 Full Pair
6 ge2_0 5 18 n/a up 100 Full Pair
7 ge2_3 8 16 n/a up 100 Full Pair
8 ge2_2 7 16 n/a up 100 Full Pair

Check the interface configuration for Link Duplex configuration as the command "show tech-support" will show the interface parameters as per the configuration done. So the output of this command completely depends on the configuration that has been done and is existing. So when the interface is configured as "full" for link duplex it will show as full and not the other way.

Similar Messages

I have a 16GB san disc that when more than half full and trying to download to my Mac gives a "communication error" message. How can I seamlessly upgrade the computers software to handle SDHC cards of this size?

I have a 16GB San Disc that when more than half full and trying to transfer the images to the iPhoto library I get the message "communication error". How can I update my computers software to be SDHC compatable? I can buy a card reader but thought an update to the software would fix this problem.
Thank you for any solutions or advice.

KRDHarris-
I am not familiar with Flickr, but found their support page at <Flickr Support>. You may get better help there than here. I get the impression that the App is somewhat buggy.
The iTunes preview page indicates the App is for iPad as well as the iPhone. <Flickr App Preview>
Fred

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html*

Out of order Ipod(under warranty), changed for a new one at apple store but battery half full? is it normal?

My appel touch 5thG did not work (still under warranty), so at the Apple store, they told us that they give us a new one, but coming back home, I noticed that battery was half full, so I guess it is not a new one. Is it normal, or should they give a new one?Thanks

Apple satys:
If you want to store your device long term, two key factors will affect the overall health of your battery: the environmental temperature and the percentage of charge on the battery when it’s powered down for storage. Therefore, we recommend the following:
Do not fully charge or fully discharge your device’s battery — charge it to around 50%. If you store a device when its battery is fully discharged, the battery could fall into a deep discharge state, which renders it incapable of holding a charge. Conversely, if you store it fully charged for an extended period of time, the battery may lose some capacity, leading to shorter battery life.
Power down the device to avoid additional battery use.
Place your device in a cool, moisture-free environment that’s less than 90° F (32° C).
If you plan to store your device for longer than six months, charge it to 50% every six
http://www.apple.com/batteries/maximizing-performance/

Ipod Shuffle say's its half full when there are only 11 song's on it.help..

Ok i hav a 512mb ipod shuffle i was putting song's on for a friend then i quickly did my ipod after (same thing 512mb shuffle) what happen when i put my friend's in it came up with all my song's an after wen i removed all my songs it said his ipod was half full sumthing like 256mb already used but i no this isent right..so please help me sum1

mrf_1989,
Are the songs you put on your firend's shuffle the same as the ones you tried to put on yours?
If not, then maybe you need to check the file format of the songs you tried to put on yours. If for some reason they are WAV files, this is your problem because WAV files are massive (~20-50MB each!)
If you find that they are WAV files, I'm sure you can google or ask someone with more knowledge than me how you can convert them back to mp3's.
If your WAV file songs were imported, you can just delete them and re-import them again but IMPORTANT:
Click edit>preferences>advanced>importing> and make sure the box next to 'import using' is NOT WAV encoder, but either mp3 or ACC.
Hope this helps!

Downloaded the 3.1 onto my 1st generation i pod touch, when turned on there is an apple with a bar half full under it. I have reset but can not bring up my home screen now. HELP ME!!!

I have a first generation I pod touch. I recently downloaded the 3.1 version to it. In the middle of the download, an apple with a bar appeared under it, the bar has been only half full for many hours now. I reset the Ipod, but still this appears, and can not get my Ipod to turn off or get to the home screen. I can only reset it to turn it off! HElp me please! Or should I truck it down to the MAC store downtown?

Try connecting it to your iTunes library in recovery mode and restoring it. See this article for instructions on getting your iPod into recovery mode.
iOS: Unable to update or restore
B-rock

Hard drive half full but cant find files to delete

just inherited a mac book pro coming from a mac mini and it sees everything was the same even after upgrading to lion but for some reason the hard drive is half full but i thought i deleted all files the previous owner had so id like to be able to get rid of the unneccesarily used space but dont know how to simply do it without fully starting over

In as much as the previous owner did not erase and reinstall the OS when he sold you the MBP the best thing to do is to start over. Do an Erase & Install of the OS. Then you can set up the MBP with your own information and password.

Why is my iPod now only half full (when previously it was full)?

I recently suffered a failure of the hard disc on my Mac; the disc was replaced and the machine restored to its factory condition from my original DVD discs.
My iTunes music is kept on an external hard disc and so wasn't affected. I therefore replaced the iTunes library file to my hard disc, from a backup, and all should have been well.
I did have a probem that iTunes failed to find some of my music. but I've now resolved this, with the help of another user on here.
My problem is that my iPod, previously virutally full, is now only about half full - but as far as I can tell, there are no tracks missing!
Could it be that my newly-installed copy of itunes in copying the tracks to the iPod at a much lower sample rate than before, even though it is using the exact same music files.
Anyone know what is going on here?
Thanks

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Error appears when trying to transfer songs once player is half full in memo

I have a creative zen nano Gb player. I was dragging and dropping songs into in until I reached about half-full memory then I received an error saying that the file could not be created. Also it said something about there not being a destination or something. I'm away from the player right now, but when I get the chance, I'll give the exact error message. When using the Creative organizer, I get an error message saying that the file did not transfer. What could be causing this?

Look in the "Flash Players" section of the FAQ post.

IPad memory shows it's full - it was only half full when I last connected to iTunes

Since I bought my iPad 3 (64 GB) and connected it to iTunes, the memory used has, until today, been about half full. Today, when i connected the iPad to update the iOS software, it shows, suddenly, that I have less than 0.1 GB left, yet I've downloaded very little in the last week since it was last connected, and certainly no more than I usually do in any week. Any suggestions?

I suspect that your storage capacity is being taken up by "other". You can verify this by looking at the capacity bar in iTunes when your iPad is connected to your computer. "other" is basically all non media content like app data and documents, Safari History and bookmarks, Notes, Calendar entries, text messages, email messages, contacts and so on.
If the "other" is taking up a huge amount of space, something is corrupt on your iPad. Restoring the iPad may be necessary to make this right. Sometimes the only cure is to restore to factory settings and then rebuild your iPad by adding the content back onto it - not be restoring from a backup. Sometimes restoring from a backup can help this situation as well. You may have to experiment and see what works.
You can read this as well and see if recalibrating how the storage is calculated helps.
http://appchronicles.com/04/too-much-valuable-space-taken-up-by-other-category-h eres-how-to-fix-that/
Try the tips in the articles first, restore from a backup if that doesn't work, and restore to factory settings if nothing else does the trick.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

My IPod is running slower and says that it has low memory although it is only half full.

My IPod is running slower and says that I have low memory although it is only half full. I don't know if this is virtual memory or what it's referring to. Can anyone help me?

Thank you so much! I didn't know that you could do that. I just followed your instructions and there was a bunch of stuff on there. I will see if this works! I assumed that it was due to something like the virtual memory on my computer, but I didn't know how to fix it. I didn't even see that in the manual. I love my iPod and use it all the time so I was really worried. I will reply in a few days and let you know if this solved the issue. Thanks for the iPod education!

Bluetooth battery icon always half full

I just bought a pair of new bluetooth headphones (Philips M1BT). When I pair them to my iPhone they work fine, but the little battery icon next to the bluetooth symbol in the status bar always shows half full, even when the headphones say they are fully charged. Has anyone else had this problem? Does this mean my headphones have a faulty battery or is the icon just showing an inaccurate level?

Thanks for getting back to me. I think the feature is only supported by some bluetooth devices. Take a look at the second screenshot on this page to see what I'm talking about:
http://www.gottabemobile.com/2014/01/01/what-do-iphone-symbols-mean-in-ios-7/

After the recent download, my ipod space said that I had reached capacity. Before the upgrade, I was less than half full...why?

After the recent download, my ipod space said that I had reached capacity. Before the upgrade, I was less than half full...why?

***after the most recent UPDATE...

Photosmart 5520 showing new cartridges as less than half full

I've just replaced the three colour cartridges with genuine HP cartridges.
There are no printing problems, no error message, yet the Cyan and Blue cartridges are only showing less than half full. The yellow one is showing full.
I've tried all the steps on the trouble-shooting page here but no change.
Is there a solution?

Hi gordonbp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that the colour ink cartridges are not giving an accurate reading. I do have a couple troubleshooting steps that I would like to run through to see if we can get this issue resolved for you.
First off, if you have the printer power cable connected to a power bar/strip, please remove it and connect the power cable direct to a wall outlet. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. Please note that the printer that is listed in this document is a LaserJet printer and that this is only used as an example seeing that the power issue applies to HP products in general.
I would also suggest that you attempt to reset the printer once the power cable is in a wall outlet. Here is a document that explains how to do a basic Reset on the printer.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Battery half full after all night charge

I charged my new iPhone 3G all night long. when I unplugged it, it shows half full. Is that normal?

I had similar problems with mine. I'm no where near an Apple store, so I had to mail mine in for replacement. I left mine on USB for over 8 hours and it only charged about 10% (from 100% dead battery). Charging over A/C was only slightly better (about 50% charge over 6 hours).
When I called Apple support, the tech on the phone confessed that the iPhones were rushed, and he said needed another 2-3 months before they were really ready. He said, on average, about 15% of the iPhones were coming back with hardware issues, which seems pretty high to me.
For my first time Apple product, if I didn't enjoy it so much in the week I did have it, despite its faults, I think I'd have to swear off Apple forever with all the problems the iPhone 3g has had.

IPS Interface duplex - Half/Full??

Similar Messages

Maybe you are looking for