IPTC Date from the file properties (EXIF) at import?
Is it possible to fill IPTC Date Created Field from the raw-file properties at import to LR4?
It would be nice – and time saving.
Thank You Geoff & Ian
My mistake. I had a checkmark in the empty date-field in my standard metadata-preset. I now understand, that the date-field shall be left blank with no checkmark in the preset to get the date correct in IPTC. Thank You again.
Similar Messages
-
Regarding reading the data from the files without using Stremas
hai to all of u...
here i have a problem where i have to read the data from the files without using any streams.
please guide me how to do this one,if possible by giving with an example
Thanks & Regard
M.RamakrishnaSimply put, you can't.
By why do you need to? -
How to print out the data from the file ?
hi all,
i have upload my file to here :
[http://www.freefilehosting.net/ft-v052010-05-09 ]
anyone can help me to print out the data from the file ?
the content of the file should be like this :
185.56.83.89 156.110.16.1 17 53037 53 72 1
and for the seven column is
srcIP dstIP prot srcPort dstPort octets packetshi all,
i have try to do this
public static void Readbinary() throws Exception
String file = "D:\\05-09.190501+0800";
DataInputStream dis = new DataInputStream(new FileInputStream(file));
//but then how to read the content ??????can you give me more hint ?????
i have find the netflow v5 structure by C
struct NFHeaderV5{
uint16_t version; // flow-export version number
uint16_t count; // number of flow entries
uint32_t sysUptime;
uint32_t unix_secs;
uint32_t unix_nsecs;
uint32_t flow_sequence; // sequence number
uint8_t engine_type; // no VIP = 0, VIP2 = 1
uint8_t engine_id; // VIP2 slot number
uint16_t reserved; // reserved1,2
struct NFV5{
ipv4addr_t srcaddr; // source IP address
ipv4addr_t dstaddr; // destination IP address
ipv4addr_t nexthop; // next hop router's IP address
uint16_t input; // input interface index
uint16_t output; // output interface index
uint32_t pkts; // packets sent in duration
uint32_t bytes; // octets sent in duration
uint32_t first; // SysUptime at start of flow
uint32_t last; // and of last packet of flow
uint16_t srcport; // TCP/UDP source port number or equivalent
uint16_t dstport; // TCP/UDP destination port number or equivalent
uint8_t pad;
uint8_t tcp_flags; // bitwise OR of all TCP flags in flow; 0x10
// for non-TCP flows
uint8_t prot; // IP protocol, e.g., 6=TCP, 17=UDP, ...
uint8_t tos; // IP Type-of-Service
uint16_t src_as; // originating AS of source address
uint16_t dst_as; // originating AS of destination address
uint8_t src_mask; // source address prefix mask bits
uint8_t dst_mask; // destination address prefix mask bits
uint16_t reserved;
but how to translate the structure to java,then get the data from the file ?
Edited by: 903893 on Dec 21, 2011 10:52 PM -
Kinect Explorer WPF C# read depth data from the file and conversion to skeleton
Hello,
I am using Kinect sensor to do some research on biometrics. Since it is impossible to find people to collect some samples, I would like to use samples from the TUM - GAID database, where there exist Color View and Depth View (in .raw format) samples. Therefore,
I need to read these samples from the file and do a batch processing, instead of performing real-time collecting of samples (where I can take automatically the Skeleton view using the Kinect SDK). So, I need help on
1. Reading the data from the file (instead of activating the Kinect sensor) and give this data as an input for conversion to a skeleton
2. Read the .raw files
Thank you very much
Kind regardsHiya,
I doubt this forum, C Sharp, will provide much help. You are asking about the Kinects system not C#
language. However, you can try this link; http://kinectforwindows.codeplex.com/
Hope this help. Thanks :) -
"Could not get the audio data from the file" error
Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.
-
Export the master data from the existing B1 DB and importing to a new B1 DB
Hi
Is there any way to export the master data like item, GL, Business partners from the existing B1 database to a newly created DB. (export from the exissitng DB to a new DB as such) so that all the data will be available in the new DB without transactions
Thanks in advanceDear Sanath
You may use CopyExpress Add on to do the same . Here you can copy masters from one Database to another with out transactions . This process is very easy also. Some of the customizations also u can do the same way.
Thanks and Regards
Rashid -
Mismatch in "Date Created" in File Properties vs IPTC Core
I have scanned my old photos in .jpg format. When I try to change the Date Created (Select Photo -> Right-Click -> File Info... -> under IPTC Image -> Change the Date Created to the date the event was held), the Date Created under File properties did not change. In effect, when I want to do a search of dates, it does its search on the Date Created in File properties.
Can I change the date on the File Properties? If so, how. Can this be done on a batch, like synchronization of Date Created in File Properties and IPTC Core but using the information on the IPTC core.
btw, I am using Bridge that comes part of the Photoshop CS2.
Heeelllllppppp........There have been several posts about changing the "date created" in Bridge. The conclulsion is NO. There are other programs that can do this so concentrate your efforts there (do not have a list so will have to explore).
Do not confuse the three "dates" that are in metastock.
Date Created (as set by camera when shot).
Date File Created
Date File Modified -
Hi Everyone,
I am new to Oracle forms. I have a requirement where user wants a form which can be used to browse a excel file from his/her system. Also after browsing the file the user should be able to load the data from the file to a table in the Oracle DB.
Any help pointers would be appreciated.
Thanks,
Satya
Message was edited by: user12098633Hi Marcus,
I am using EBS (E- Business Suite) ERP and version is 11.5.10.2
My database version is as below
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE
11.2.0.3.0
Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I want to move csv file via EBS only. Average size of this will be max 600-700 bytes.
Program should be in pl/sql package or concurrent program or custom .fmb (d2k forms) or custom .rdf (d2k report) or through alert. I am not using samba. -
How to read data from a file in OSB
hi guys,
Recently, I've got a problem with reading file from specific location. I've actually followed this post OSB 11g - Read or Poll File in OSB - Oracle Fusion Middleware Blog, and then
I know how to read a file. However, it does not as expected. Because, I've found no way to read data from the file. Therefore, no chance to manipulate the data like assigning to a variable, or extracting ....
Hence, is there any way to read data from file by using proxy service in OSB ??? No Java code ???
by the way, supposed that there is no way to read data from a file in OSB. So, What purposes will the way in the post above be used for?
Many thanks in advancehttp://jakarta.apache.org/poi/hssf/index.html
HSSF stands for Horrible Spreadsheet Format, but it still works! -
How to read data from a file from a remote area
Hi,
i have a jsp page, now i need to read & write data from the file, When i run my program then i give the file path is: "c://sample.txt" if user access this page from remote area to read & write data then what will be the file path? Is there anyone who can solve this problem? What will be the solution of this problem? Please help me.
With regards
BinaFileReader fr = new FileReader("\\\\pcName\\pcName-Share\\web.xml");
System.out.println(fr.read());
fr.close(); -
Loading data from a file?
hi, could anyone please help me with this:
in a small application involving a Company with Programmers as its employees, i am supposed to add a functionality to Load data from a file. i have alomost done it using fileTextReader(); the only problem now is for some reason even though my file contains data of only one programmer, but the system is adding two programmer, one of them with null values. similarly if i supply details of 4 programmer in the file, 5 will get added, one of them with nulls.
i have checked my addEmployee method which is fine. i have checked it by giving data using command promp, it works fine this way. here is the code i am using for method: loadFromtheFile(); (could anyone find the reason!!)
// Get the file name from the user.
ConsoleIO.out.print("\t" + "Enter the file name >>> ");
String fileName = ConsoleIO.in.readString();
// Initialise the SoftwareHouse from the file
try {
// Open the file
FileTextReader inputFile = new FileTextReader( fileName );
while( inputFile.isEOF() == false ) {
// Get the data from the file
String name = inputFile.readLine();
int payno = inputFile.readInt();
int salary = inputFile.readInt();
int year = inputFile.readInt();
String language = inputFile.readLine();
// Add an employee to the SoftwareHouse.
theCompany.addEmployee( new Programmer(payno, salary, name, year, language) );
// Display the outcome
ConsoleIO.out.println( "\n\t" + theCompany.getStatus() );
catch (IOException exception) {
ConsoleIO.out.println("\n\t" + "Cannot open " + fileName);
}i have done that and it works if only one programmer data is given in the file.....as soon as i would give data for 2 or more programmers it will assign wrong values to the wrong attributes. could u have a look if this is what u suggested me:
// Get the file name from the user.
ConsoleIO.out.print("\t" + "Enter the file name >>> ");
String fileName = ConsoleIO.in.readString();
// Initialise the SoftwareHouse from the file
try {
// Open the file
FileTextReader inputFile = new FileTextReader( fileName );
while( inputFile.isEOF() == false ) {
// Get the data from the file
String name = inputFile.readLine();
int payno = inputFile.readInt();
int salary = inputFile.readInt();
String language = inputFile.readLine();
int year = inputFile.readInt();
// Add an employee to the SoftwareHouse.
theCompany.addEmployee( new Programmer(payno, salary, name, year, language) );
// Display the outcome
ConsoleIO.out.println( "\n\t" + theCompany.getStatus() );
if(inputFile.readLine() == null){
break;
catch (IOException exception) {
ConsoleIO.out.println("\n\t" + "Cannot open " + fileName);
} -
Join data from a file with an internal table
Hi to everybody!!
I need help, I don't know how to join two differents data, one of them is internal...
This select fill my itab
SELECT PERNR PERID VORNA NACHN FROM PA0002 APPENDING TABLE itab_tabla
WHERE
PA0002~BEGDA <= SY-DATUM AND
PA0002~ENDDA >= SY-DATUM AND
PERID = G_PERID.
ENDLOOP.
Now I have to insert inside the table more data that pass from a file...but I don't know how to join this... can anybody help me?
Thanks a lot
Regards,
RebecaHI,
you will need to upload the file by Using the FM GUI_UPLOAD.
this will take the data from the file to an internal table that you will have to declare.
once you get the data in to your table,you can merge both the tables in to another final table or in the 1st internal table if all the fields are there and modify the table.so the table will have the records of both the tables.
after you get the data in your second table"
loop at itab2.
move: <field 1> to itab1.
<field 2> to itab1.
modify itab1.
endloop. -
Use LINQ to extract the data from a file...
Hi,
I have created a Subprocedure CreateEventList
which populates an EventsComboBox
with a current day's events (if any).
I need to store the events in a generic List communityEvents
which is a collection of
communityEvent
objects. This List needs to be created and assigned to the instance variable
communityEvents.
This method should call helper method ExtractData
which will use LINQ to extract the data from my file.
The specified day is the date selected on the calendar control. This method will be called from the CreateEventList.
This method should clear all data from List communityEvents.
A LINQ
query that creates CommunityEvent
objects should select the events scheduled for selected
day from the file. The selected events should be added to List
communityEvents.
See code below.
Thanks,
public class CommunityEvent
private int day;
public int Day
get
return day;
set
day = value;
private string time;
public string Time
get
return time;
set
time = value;
private decimal price;
public decimal Price
get
return price;
set
price = value;
private string name;
public string Name
get
return name;
set
name = value;
private string description;
public string Description
get
return description;
set
description = value;
private void eventComboBox_SelectedIndexChanged(object sender, EventArgs e)
if (eventComboBox.SelectedIndex == 0)
descriptionTextBox.Text = "2.30PM. Price 12.50. Take part in creating various types of Arts & Crafts at this fair.";
if (eventComboBox.SelectedIndex == 1)
descriptionTextBox.Text = "4.30PM. Price 00.00. Take part in cleaning the local Park.";
if (eventComboBox.SelectedIndex == 2)
descriptionTextBox.Text = "1.30PM. Price 10.00. Take part in selling goods.";
if (eventComboBox.SelectedIndex == 3)
descriptionTextBox.Text = "12.30PM. Price 10.00. Take part in a game of rounders in the local Park.";
if (eventComboBox.SelectedIndex == 4)
descriptionTextBox.Text = "11.30PM. Price 15.00. Take part in an Egg & Spoon Race in the local Park";
if (eventComboBox.SelectedIndex == 5)
descriptionTextBox.Text = "No Events today.";Any help here would be great.
Look, you have to make the file a XML file type -- Somefilename.xml.
http://www.xmlfiles.com/xml/xml_intro.asp
You can use NotePad XML to make the XML and save the text file.
http://support.microsoft.com/kb/296560
Or you can just use Notepad (standard), if you know the basics of how to create XML, which is just text data that can created and saved in a text file, which, represents data.
http://www.codeproject.com/Tips/522456/Reading-XML-using-LINQ
You can do a (select new CommunityEvent) just like the example is doing a
select new FileToWatch and load the XML data into the CommunityEvent properties.
So you need to learn how to make a manual XML textfile with XML data in it, and you need to learn how to use LINQ to read the XML. Linq is not going to work against some flat text file you created. There are plenty of examples out on Bing and Google
on how to use Linq-2-XML.
http://en.wikipedia.org/wiki/Language_Integrated_Query
<copied>
LINQ extends the language by the addition of query
expressions, which are akin to
SQL statements, and can be used to conveniently extract and process data from
arrays, enumerable
classes, XML documents,
relational databases, and third-party data sources. Other uses, which utilize query expressions as a general framework for readably composing arbitrary computations, include the construction of event handlers<sup class="reference" id="cite_ref-reactive_2-0">[2]</sup>
or
monadic parsers.<sup class="reference" id="cite_ref-parscomb_3-0">[3]</sup>
<end>
<sup class="reference" id="cite_ref-parscomb_3-0"></sup> -
Static lookup lists:read data from a Java *.properties file
Hi
i need to make static lookup lists i am using read data from a Java *.properties file
i am using the Class "PropertyFileBasedLookupViewObjectImpl" that wrote by Steve Muench in ToyStore.
but i need to use the default language for that i update the loadDataFromPropertiesFile()
method to find the correct properties file
String temp=Locale.getDefault().getLanguage();
String propertyFile =
getViewDef().getFullName().replace('.', '/')+"_"+temp+ ".properties";
the problem:
For English(TEST_en.properties) it is good and working
For Arabic(TEST_ar.properties) read from correct file _ar.properties
but the dispaly character is wrong
When Debug
In the File 1=دمشق
In debug 1=/u32423Depending on your use case you can either use a programmatic VO or directly expose the JV class as a data control.
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_36/jdtut_11r2_36.html -
Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
MudassarThats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Maybe you are looking for
-
Cannot select the fields for table view WB2_V_MKPF_MSEG2
Hi, I have a program where the query is using join statement of MSEG and MKPF. As part of the performance enhancement I use Table View WB2_V_MKPF_MSEG2 instead. Validation: Entries in MSEG and MKPF is the same as in WB2_V_MKPF_MSEG2 = OK (via SE16)
-
Planned delivery time in purchase agreement (contract)
Hello, When I create a material contract for a material master without an existing info record, the system leaves the field "planned delivery time" blank. When there is already an inforecord for the material, the system copies the planned delivery ti
-
Hashtable insert failed. Load factor too high : Dot net 4.5
I'm getting an exception "System.InvalidOperationException: Hashtable insert failed. Load factor too high." My application is developed in VS2010 with 4.0 framework and it is working fine in our development environment (4.0 version ) (for 4.0 framewo
-
Naming Problem Using "~" in Aperture
I started using Aperture two weeks ago while I was digitizing and importing old slides (4,000 so far and I love using Aperture). Today I noticed that one folder would only import a single picture and not the whole folder. Problem was that only one fi
-
How to get links to single Outlook Elements
When I drag any Outlook item (or any office document) to the Outlook journal folder I get a new journal entry with a link to the Outlook item. This link can be moved into the notes field of any other Outlook item. I love it to have such links. Is it