Irrecoverable error
Hi,
When I went to "Jobs", "Events", and "Nodes" in OEM, I always get error message "An irrecoverable error occurred during the processing of the operation. Please contact Oracle Support Services with oms and console trace".
I have 9iAS and 9iDS installed on the same computer. Please give me some suggestions on that.
Thank you very much!
Xuewei
I was unable to complete the Vista upgrade via the Moduslink on Toshiba's website http://wwww.toshiba-europe.com/vista-upgrade, even though I got to paying for the upgrade with my credit card. When my payment was being processed I got an 'unrecoverable error', so I went back to repeat the process and this time the site didn't recognize my COA on the bottom of the laptop.
I contacted Moduslink via the following Tel No. 00800 666 44 666 (UK) and spoke to one of their support staff (choose options 5 and then 8). There is a problem with their site excepting payments from credit or debit cards. The representative reset my COA, but it takes 48 hours for it to clear (so much from electronic data communications to servers). I have been told to retry the upgrade process again on Friday 16/02/2007, however, this time to pay either by wireless transfer from my bank or send a cheque.
Hopefully, this will help others who were frustrated with the Vista upgrade debacle. It would be more appropriate however, if the company concerned, Modulink, resolved the issue in the 1st place. Firstly by informing their customers that there was an issue, secondly on a work around to the problem and finally fixing the problem. Will commonsense ever prevail?
Ala (14/02/2007)
Message was edited by: Ala_Jackson
Similar Messages
-
Project Analytics 7.9.6.1 - Error while running a full load
Hi All,
I am performing a full load for Projects Analytics and get the following error,
=====================================
ERROR OUTPUT
=====================================
1103 SEVERE Wed Nov 18 02:49:36 WST 2009 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Gl_Account
1104 SEVERE Wed Nov 18 02:49:36 WST 2009
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_CodeDimension_Gl_Account:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Gl_Account
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
Session log initialises NULL value to mapping parameter MPLT_ADI_CODES.$$CATEGORY. This is then used insupsequent SQL and results in ORA-00936: missing expression error following are the initialization section and the load section containing the error in the log
Initialisation
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10.DATAWAREHOUSE.SDE_ORA11510_Adaptor.SDE_ORA_CodeDimension_Gl_Account_Segments.log] for session parameter:[$PMSessionLogFile].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[MPLT_ADI_CODES.$$CATEGORY].
DIRECTOR> VAR_27028 Use override value [4] for mapping parameter:[MPLT_SA_ORA_CODES.$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27028 Use override value [DEFAULT] for mapping parameter:[MPLT_SA_ORA_CODES.$$TENANT_ID].
DIRECTOR> TM_6014 Initializing session [SDE_ORA_CodeDimension_Gl_Account_Segments] at [Wed Nov 18 02:49:11 2009].
DIRECTOR> TM_6683 Repository Name: [repo_service]
DIRECTOR> TM_6684 Server Name: [int_service]
DIRECTOR> TM_6686 Folder: [SDE_ORA11510_Adaptor]
DIRECTOR> TM_6685 Workflow: [SDE_ORA_CodeDimension_Gl_Account_Segments] Run Instance Name: [] Run Id: [17]
DIRECTOR> TM_6101 Mapping name: SDE_ORA_CodeDimension_GL_Account_Segments [version 1].
DIRECTOR> TM_6963 Pre 85 Timestamp Compatibility is Enabled
DIRECTOR> TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS]
DIRECTOR> TM_6827 [C:\Informatica\PowerCenter8.6.1\server\infa_shared\Storage] will be used as storage directory for session [SDE_ORA_CodeDimension_Gl_Account_Segments].
DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
DIRECTOR> TM_6703 Session [SDE_ORA_CodeDimension_Gl_Account_Segments] is run by 32-bit Integration Service [node01_ASG596138], version [8.6.1], build [1218].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [UNICODE]
MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6151 The session sort order is [Binary].
MAPPING> TM_6185 Warning. Code page validation is disabled in this session.
MAPPING> TM_6156 Using low precision processing.
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM error log disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [orcl], user [DAC_REP]
MAPPING> CMN_1716 Lookup [mplt_ADI_Codes.Lkp_Master_Map] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> CMN_1716 Lookup [mplt_ADI_Codes.Lkp_Master_Code] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> CMN_1716 Lookup [mplt_ADI_Codes.Lkp_W_CODE_D] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6007 DTM initialized successfully for session [SDE_ORA_CodeDimension_Gl_Account_Segments]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Nov 18 02:49:14 2009)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Nov 18 02:49:14 2009)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 32000000 bytes and Block size is 128000 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [asgdev], user [APPS]
READER_1_1_1> BLKR_16051 Source database connection [ORA_11_5_10] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8147 Writer: Target is database [orcl], user [DAC_REP], bulk mode [OFF]
WRITER_1_*_1> WRT_8221 Target database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
WRITER_1_*_1> WRT_8124 Target Table W_CODE_D :SQL INSERT statement:
INSERT INTO W_CODE_D(DATASOURCE_NUM_ID,SOURCE_CODE,SOURCE_CODE_1,SOURCE_CODE_2,SOURCE_CODE_3,SOURCE_NAME_1,SOURCE_NAME_2,CATEGORY,LANGUAGE_CODE,MASTER_DATASOURCE_NUM_ID,MASTER_CODE,MASTER_VALUE,W_INSERT_DT,W_UPDATE_DT,TENANT_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_CODE_D :SQL UPDATE statement:
UPDATE W_CODE_D SET SOURCE_CODE_1 = ?, SOURCE_CODE_2 = ?, SOURCE_CODE_3 = ?, SOURCE_NAME_1 = ?, SOURCE_NAME_2 = ?, MASTER_DATASOURCE_NUM_ID = ?, MASTER_CODE = ?, MASTER_VALUE = ?, W_INSERT_DT = ?, W_UPDATE_DT = ?, TENANT_ID = ? WHERE DATASOURCE_NUM_ID = ? AND SOURCE_CODE = ? AND CATEGORY = ? AND LANGUAGE_CODE = ?
WRITER_1_*_1> WRT_8124 Target Table W_CODE_D :SQL DELETE statement:
DELETE FROM W_CODE_D WHERE DATASOURCE_NUM_ID = ? AND SOURCE_CODE = ? AND CATEGORY = ? AND LANGUAGE_CODE = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_CODE_D]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
Load section
*****START LOAD SESSION*****
Load Start Time: Wed Nov 18 02:49:16 2009
Target tables:
W_CODE_D
READER_1_1_1> RR_4029 SQ Instance [mplt_BC_ORA_Codes_GL_Account_Segments.Sq_Fnd_Flex_Values] User specified SQL Query [SELECT
FND_FLEX_VALUES.FLEX_VALUE_SET_ID,
FND_FLEX_VALUES.FLEX_VALUE,
MAX(FND_FLEX_VALUES_TL.DESCRIPTION),
FND_ID_FLEX_SEGMENTS.ID_FLEX_NUM,
FND_ID_FLEX_SEGMENTS.APPLICATION_COLUMN_NAME
FROM
FND_FLEX_VALUES,
FND_FLEX_VALUES_TL,
FND_ID_FLEX_SEGMENTS,
FND_SEGMENT_ATTRIBUTE_VALUES
WHERE
FND_FLEX_VALUES.FLEX_VALUE_ID = FND_FLEX_VALUES_TL.FLEX_VALUE_ID AND FND_FLEX_VALUES_TL.LANGUAGE ='US' AND
FND_ID_FLEX_SEGMENTS.FLEX_VALUE_SET_ID =FND_FLEX_VALUES.FLEX_VALUE_SET_ID AND
FND_ID_FLEX_SEGMENTS.APPLICATION_ID = 101 AND
FND_ID_FLEX_SEGMENTS.ID_FLEX_CODE ='GL#' AND
FND_ID_FLEX_SEGMENTS.ID_FLEX_NUM =FND_SEGMENT_ATTRIBUTE_VALUES.ID_FLEX_NUM AND
FND_SEGMENT_ATTRIBUTE_VALUES.APPLICATION_ID =101 AND
FND_SEGMENT_ATTRIBUTE_VALUES.ID_FLEX_CODE = 'GL#' AND
FND_ID_FLEX_SEGMENTS.APPLICATION_COLUMN_NAME=FND_SEGMENT_ATTRIBUTE_VALUES.APPLICATION_COLUMN_NAME AND
FND_SEGMENT_ATTRIBUTE_VALUES.ATTRIBUTE_VALUE ='Y'
GROUP BY
FND_FLEX_VALUES.FLEX_VALUE_SET_ID,
FND_FLEX_VALUES.FLEX_VALUE,
FND_ID_FLEX_SEGMENTS.ID_FLEX_NUM,
FND_ID_FLEX_SEGMENTS.APPLICATION_COLUMN_NAME]
READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Nov 18 02:49:17 2009)
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Nov 18 02:49:17 2009)
LKPDP_3> DBG_21312 Lookup Transformation [mplt_ADI_Codes.Lkp_W_CODE_D]: Lookup override sql to create cache: SELECT W_CODE_D.SOURCE_NAME_1 AS SOURCE_NAME_1, W_CODE_D.SOURCE_NAME_2 AS SOURCE_NAME_2, W_CODE_D.MASTER_DATASOURCE_NUM_ID AS MASTER_DATASOURCE_NUM_ID, W_CODE_D.MASTER_CODE AS MASTER_CODE, W_CODE_D.MASTER_VALUE AS MASTER_VALUE, W_CODE_D.W_INSERT_DT AS W_INSERT_DT, W_CODE_D.TENANT_ID AS TENANT_ID, W_CODE_D.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, W_CODE_D.SOURCE_CODE AS SOURCE_CODE, W_CODE_D.CATEGORY AS CATEGORY, W_CODE_D.LANGUAGE_CODE AS LANGUAGE_CODE FROM W_CODE_D
WHERE
W_CODE_D.CATEGORY IN () ORDER BY DATASOURCE_NUM_ID,SOURCE_CODE,CATEGORY,LANGUAGE_CODE,SOURCE_NAME_1,SOURCE_NAME_2,MASTER_DATASOURCE_NUM_ID,MASTER_CODE,MASTER_VALUE,W_INSERT_DT,TENANT_ID
LKPDP_3> TE_7212 Increasing [Index Cache] size for transformation [mplt_ADI_Codes.Lkp_W_CODE_D] from [1000000] to [4734976].
LKPDP_3> TE_7212 Increasing [Data Cache] size for transformation [mplt_ADI_Codes.Lkp_W_CODE_D] from [2000000] to [2007040].
READER_1_1_1> BLKR_16019 Read [625] rows, read [0] error rows for source table [FND_ID_FLEX_SEGMENTS] instance name [mplt_BC_ORA_Codes_GL_Account_Segments.FND_ID_FLEX_SEGMENTS]
READER_1_1_1> BLKR_16008 Reader run completed.
LKPDP_3> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_3:READER_1_1> DBG_21438 Reader: Source is [orcl], user [DAC_REP]
LKPDP_3:READER_1_1> BLKR_16051 Source database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
LKPDP_3:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_3:READER_1_1> BLKR_16007 Reader run started.
LKPDP_3:READER_1_1> RR_4049 SQL Query issued to database : (Wed Nov 18 02:49:18 2009)
LKPDP_3:READER_1_1> CMN_1761 Timestamp Event: [Wed Nov 18 02:49:18 2009]
LKPDP_3:READER_1_1> RR_4035 SQL Error [
ORA-00936: missing expression
Could you please suggest what the issue might be and how it can be fixed?
Many thanks,
KiranI have continued related detains in the following thread,
Mapping Parameter $$CATEGORY not included in the parameter file (7.9.6.1)
Apologies for the inconvenience.
Thanks,
Kiran -
Hi All,
I am currently trying to install the 11gR2 grid infra for cluster , First i ran the cluvfy i got the issue " exectask could not be retrieved from node "saixlab52"
" then i tried to started while installing i am getting "Internal error" and installation got aborted , below is the error i am getting in the logfiles , i have checked the first node oifcfg is there ... second node the file is not there ... seems it's not copying to the remote node ..
pls provide me any of the suggestions ..
======================================
Checking node reachability...
Check: Node reachability from node "saixlab51"
Destination Node Reachable?
saixlab52 yes
saixlab51 yes
Result: Node reachability check passed from node "saixlab51"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
saixlab52 passed
saixlab51 passed
Result: User equivalence check passed for user "oracle"
Version of exectask could not be retrieved from node "saixlab52"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
saixlab51 passed
=========================================
===================================
NFO: All remote nodes are configured for passwordless SSH connectivity
INFO: Validating Public nodes for user equivalence
INFO: Validating Hostnames for nodes
INFO: Validating node readiness
INFO: Checking for node liveliness
INFO: Validating Public Hosts for User Equivalence
INFO: Validating for 9.2, 10gR1 or Local CSS
INFO: Setting public and VIP node info to the bean
INFO: Validating Public And Private Interfaces Across Cluster Nodes
INFO: Validating Node VIPs
INFO: Completed validating state <CRSNodeInformationUI>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getSubnetInformation
INFO: Collecting interface information for node saixlab51
INFO: Collecting interface information for node saixlab52
INFO: Creating scratch path on node saixlab52
INFO: Created scratch path on node saixlab52
INFO: Copying oifcfg to node saixlab52
INFO: A cluster operation has failed while collecting interface information on node saixlab52: Message: error: No such file or directory, file: '/tmp/OraInstall2011-03-18_11-30-52AM/ext/bin/oifcfg' :failed
INFO: Removing scratch path from node saixlab52
SEVERE: [FATAL] [INS-00001] Unknown irrecoverable error
CAUSE: No additional information available.
ACTION: Refer to the logs or contact Oracle Support Services.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:679
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Grid Infrastructure
====================================
Regards
KamalHi,
Thanks for your reply !!
But the cksum values seems fine .. no problem .
Regards
Kamal -
Hi
When i ran the ETL load for Project analytics , it errored out.
In the DAC , these 3 items errored
1. SIL_GlobalCurrencyGeneral_Update
2. SDE_ORA_UserDimension
3. SDE_ORA_EmployeeDimension
below is the error from the log file. Any help will be appreciated
9 SEVERE Thu Sep 24 17:54:48 PDT 2009
START OF ETL
10 SEVERE Thu Sep 24 17:57:14 PDT 2009 Unable to evaluate method getNamedSourceIdentifier for class com.siebel.analytics.etl.etltask.PauseTask
11 SEVERE Thu Sep 24 17:57:15 PDT 2009 Unable to evaluate method getNamedSource for class com.siebel.analytics.etl.etltask.PauseTask
12 SEVERE Thu Sep 24 17:57:20 PDT 2009 Unable to evaluate method getNamedSourceIdentifier for class com.siebel.analytics.etl.etltask.InformaticaTask
13 SEVERE Thu Sep 24 17:57:20 PDT 2009 Unable to evaluate method getNamedSource for class com.siebel.analytics.etl.etltask.InformaticaTask
14 SEVERE Thu Sep 24 17:58:27 PDT 2009 Unable to evaluate method getNamedSourceIdentifier for class com.siebel.analytics.etl.etltask.TaskPrecedingActionScriptTask
15 SEVERE Thu Sep 24 17:58:27 PDT 2009 Unable to evaluate method getNamedSource for class com.siebel.analytics.etl.etltask.TaskPrecedingActionScriptTask
16 SEVERE Thu Sep 24 17:58:39 PDT 2009 Starting ETL Process.
17 SEVERE Thu Sep 24 17:59:14 PDT 2009 Informatica Status Poll Interval new value : 20000(milli-seconds)
19 SEVERE Thu Sep 24 18:06:59 PDT 2009 /oracle/dac/OracleBI/bifoundation/dac/Informatica/parameters/input/ORACLE specified is not a currently existing directory
20 SEVERE Thu Sep 24 18:06:59 PDT 2009 /oracle/dac/OracleBI/bifoundation/dac/Informatica/parameters/input/Oracle specified is not a currently existing directory
21 SEVERE Thu Sep 24 18:06:59 PDT 2009 /oracle/dac/OracleBI/bifoundation/dac/Informatica/parameters/input/oracle specified is not a currently existing directory
22 SEVERE Thu Sep 24 18:06:59 PDT 2009 /oracle/dac/OracleBI/bifoundation/dac/Informatica/parameters/input/ORACLE (THIN) specified is not a currently existing directory
24 SEVERE Thu Sep 24 18:07:10 PDT 2009 /oracle/dac/OracleBI/bifoundation/dac/Informatica/parameters/input/FLAT FILE specified is not a currently existing directory
25 SEVERE Thu Sep 24 18:08:23 PDT 2009 Request to start workflow : 'SILOS:SIL_CurrencyTypes' has completed with error code 0
26 SEVERE Thu Sep 24 18:08:26 PDT 2009 Request to start workflow : 'SDE_ORAR12_Adaptor:SDE_ORA_ProductMultipleCategories_Full' has completed with error code 0
27 SEVERE Thu Sep 24 18:08:26 PDT 2009 Request to start workflow : 'SDE_ORAR12_Adaptor:SDE_ORA_ExchangeRateGeneral_Full' has completed with error code 0
28 SEVERE Thu Sep 24 18:08:26 PDT 2009 Request to start workflow : 'SDE_ORAR12_Adaptor:SDE_ORA_Product_Categories_Derive' has completed with error code 0
29 SEVERE Thu Sep 24 18:08:26 PDT 2009 Request to start workflow : 'SILOS:SIL_Parameters_Update' has completed with error code 0
30 SEVERE Thu Sep 24 18:08:26 PDT 2009 Request to start workflow : 'SDE_ORAR12_Adaptor:SDE_ORA_Stage_GLAccountDimension_FinSubCodes' has completed with error code 0
31 SEVERE Thu Sep 24 18:08:27 PDT 2009 Request to start workflow : 'SDE_ORAR12_Adaptor:SDE_ORA_EmployeeDimension_Addresses_Full' has completed with error code 0
32 SEVERE Thu Sep 24 18:08:27 PDT 2009 Request to start workflow : 'SDE_ORAR12_Adaptor:SDE_ORA_UserDimension_Full' has completed with error code 0
33 SEVERE Thu Sep 24 18:08:27 PDT 2009 Request to start workflow : 'SDE_ORAR12_Adaptor:SDE_ORA_GeoCountryDimension' has completed with error code 0
34 SEVERE Thu Sep 24 18:08:27 PDT 2009 Request to start workflow : 'SILOS:SIL_GlobalCurrencyGeneral_Update' has completed with error code 0
35 SEVERE Thu Sep 24 18:19:53 PDT 2009 Error while contacting Informatica server for getting workflow status for SDE_ORA_UserDimension_Full
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.0 HotFix4], build [272.1017], LINUX 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Thu Sep 24 18:19:40 2009
Connected to Integration Service: [Integ_r1211].
Integration Service status: [Running]
Integration Service startup time: [Thu Sep 24 11:50:39 2009]
Integration Service current time: [Thu Sep 24 18:19:43 2009]
Folder: [SDE_ORAR12_Adaptor]
Workflow: [SDE_ORA_UserDimension_Full] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_UserDimension_Full] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_UserDimension_Full] will be failed.]
Workflow run id [1611].
Start time: [Thu Sep 24 18:08:26 2009]
End time: [Thu Sep 24 18:15:45 2009]
Workflow log file: [oracle/Informatica/PowerCenter8.6.0/server/infa_shared/WorkflowLogs/SDE_ORA_UserDimension_Full.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Integ_r1211]
Disconnecting from Integration Service
Completed at Thu Sep 24 18:19:43 2009
=====================================
ERROR OUTPUT
=====================================
37 SEVERE Thu Sep 24 18:19:53 PDT 2009 pmcmd startworkflow -sv Integ_r1211 -d Domain_r1211 -u Administrator -p **** -f SDE_ORAR12_Adaptor -lpf /oracle/Informatica/PowerCenter8.6.0/server/infa_shared/SrcFiles/ORA_R12_Flatfile.DataWarehouse.SDE_ORAR12_Adaptor.SDE_ORA_Stage_GLAccountDimension_FinSubCodes.txt SDE_ORA_Stage_GLAccountDimension_FinSubCodes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
36 SEVERE Thu Sep 24 18:19:53 PDT 2009 Error while contacting Informatica server for getting workflow status for SIL_GlobalCurrencyGeneral_Update
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.0 HotFix4], build [272.1017], LINUX 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Thu Sep 24 18:19:12 2009
Connected to Integration Service: [Integ_r1211].
Integration Service status: [Running]
Integration Service startup time: [Thu Sep 24 11:50:39 2009]
Integration Service current time: [Thu Sep 24 18:19:21 2009]
Folder: [SILOS]
Workflow: [SIL_GlobalCurrencyGeneral_Update] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SIL_GlobalCurrencyGeneral_Update] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SIL_GlobalCurrencyGeneral_Update] will be failed.]
Workflow run id [1610].
Start time: [Thu Sep 24 18:08:26 2009]
End time: [Thu Sep 24 18:15:47 2009]
Workflow log file: [oracle/Informatica/PowerCenter8.6.0/server/infa_shared/WorkflowLogs/SIL_GlobalCurrencyGeneral_Update.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Integ_r1211]
Disconnecting from Integration Service
Completed at Thu Sep 24 18:19:21 2009
=====================================
ERROR OUTPUT
=====================================
38 SEVERE Thu Sep 24 18:19:53 PDT 2009 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_UserDimension_Full
39 SEVERE Thu Sep 24 18:19:53 PDT 2009 Could not attach to workflow because of errorCode 36331 For workflow SIL_GlobalCurrencyGeneral_Update
40 SEVERE Thu Sep 24 18:19:53 PDT 2009
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR12_Adaptor:SDE_ORA_UserDimension_Full:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_UserDimension_Full
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.0 HotFix4], build [272.1017], LINUX 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Thu Sep 24 18:19:40 2009
Connected to Integration Service: [Integ_r1211].
Integration Service status: [Running]
Integration Service startup time: [Thu Sep 24 11:50:39 2009]
Integration Service current time: [Thu Sep 24 18:19:43 2009]
Folder: [SDE_ORAR12_Adaptor]
Workflow: [SDE_ORA_UserDimension_Full] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_UserDimension_Full] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_UserDimension_Full] will be failed.]
Workflow run id [1611].
Start time: [Thu Sep 24 18:08:26 2009]
End time: [Thu Sep 24 18:15:45 2009]
Workflow log file: [oracle/Informatica/PowerCenter8.6.0/server/infa_shared/WorkflowLogs/SDE_ORA_UserDimension_Full.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Integ_r1211]
Disconnecting from Integration Service
Completed at Thu Sep 24 18:19:43 2009
=====================================
ERROR OUTPUT
=====================================
Re-Queue to attempt to run again or attach to running workflow
if Execution Plan is still running or re-submit Execution Plan to execute the workflow.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:179)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:585)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
41 SEVERE Thu Sep 24 18:20:01 PDT 2009
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_GlobalCurrencyGeneral_Update:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SIL_GlobalCurrencyGeneral_Update
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :Shyam
i have attached the info you had asked.
When i reran , this time only SDE_ORA_ExchangeRateGeneral failed. Below is the output of 2 files
1. SDE_ORA_ExchangeRateGeneral_Full
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.0 HotFix4], build [272.1017], LINUX 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Fri Sep 25 10:19:38 2009
Connected to Integration Service: [Integ_r1211].
Integration Service status: [Running]
Integration Service startup time: [Thu Sep 24 11:50:39 2009]
Integration Service current time: [Fri Sep 25 10:19:43 2009]
Folder: [SDE_ORAR12_Adaptor]
Workflow: [SDE_ORA_ExchangeRateGeneral_Full] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_ExchangeRateGeneral_Compress_Full] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_ExchangeRateGeneral_Full] will be failed.]
Workflow run id [1806].
Start time: [Fri Sep 25 10:18:00 2009]
End time: [Fri Sep 25 10:19:18 2009]
Workflow log file: [oracle/Informatica/PowerCenter8.6.0/server/infa_shared/WorkflowLogs/SDE_ORA_ExchangeRateGeneral_Full.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Integ_r1211]
Disconnecting from Integration Service
Completed at Fri Sep 25 10:19:43 2009
=====================================
ERROR OUTPUT
=====================================
2. SDE_ORA_ExchangeRateGeneral_Full_SESSIONS
=====================================
STD OUTPUT
=====================================
Informatica(r) PMREP, version [8.6.0 HotFix4], build [272.1017], LINUX 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
This Software may be protected by U.S. Patent Numbers 6,208,990; 6,044,374; 6,014,670; 6,032,158; 5,794,246; 6,339,775; 6,850,947; 6,895,471; 7,254,590 and other U.S. Patents Pending.
Invoked at Fri Sep 25 10:08:55 2009
[[REP_57066] Request timed out.]
[09/25/2009 10:12:05-[REP_55112] Unable to connect to the Repository Service [Rep_r1211] since the resilience time is up.]
[Failed to connect to repository service [Rep_r1211].]
An error occurred while accessing the repository[Failed to connect to repository service [Rep_r1211].]
[09/25/2009 10:12:05-[REP_55102] Failed to connect to repository service [Rep_r1211].]
Repository connection failed.
Failed to execute listobjectdependencies.
Completed at Fri Sep 25 10:12:05 2009
=====================================
ERROR OUTPUT
===================================== -
Custom Workflow Load Error in Power Center error code 36331
Hi,
I have installed OBIEE version 11.1.6 and OBI APPS version 7.9.6.3. I am using informatica power center 9.0.1.
I have followed the following guide Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
Version 9.0.1
When i run a load i am getting the error code 36331.
And the Workflow Log shows the below:
*ERROR 2/5/2013 5:30:58 PM node1 1423948096 LM_36320 Session task instance [C_SDE_ORA_EmployeeDimension]: Execution failed.*
The DAC log file is as follows
*3722 SEVERE Tue Feb 05 17:23:29 GMT 2013 Workflow C_SDE_ORA_EmployeeDimension failed with the following message :*
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
*3723 SEVERE Tue Feb 05 17:23:29 GMT 2013 pmcmd startworkflow -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
*3724 SEVERE Tue Feb 05 17:23:29 GMT 2013 Could not get statistics for sessions using command :pmcmd getsessionstatistics -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -w C_SDE_ORA_EmployeeDimension SDE_ORA_EmployeeDimension*
*3725 SEVERE Tue Feb 05 17:23:29 GMT 2013*
ANOMALY INFO::: Error while executing : INFORMATICA TASK:CUSTOM_SDE_ORAR1213_Adapter:C_SDE_ORA_EmployeeDimension:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIAIS -d Instance -u Administrator -p *** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
I have checked all of the Mappings, Mapplets and Workflows as well as generating parameters for attempting the load, but it still errors. Does anyone have any ideas?
Many thanks for any help in advance.Was the Workflow or the DAC task been modified. Because the Out-of box customer dimension task would look like:
is Commands executed :
pmcmd startworkflow -sv OBID_REP -d Domain_xxx.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf /u01/oracle/Informatica/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_EmployeeDimension_Full.txt SDE_ORA_EmployeeDimension_Full
If a session in the workflow is renamed then the DAC Command's need to be modified to reflect the new name.
Was Execution Plan built before Starting it.
Let me know if this helped.
Regards,
Jay -
Error while running ETL for Financials_Oracle R1213.
Hi All,
I have done all installation and configuration for OBIA 7.9.6.4. I am getting following error while running ETL for Financials_Oracle R1213.
===========================================================================================================
1)While starting DAC server, I am getting following error:
SEVERE: Incorrectly specified Post-Etl Script/Executable
================================================================================================================
2) After starting ETL Financials_Oracle R1213,
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1) pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable 2013-11-27 11:26:59.923 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has finished execution with Failed status.2013-11-27 11:26:28.855 Acquiring Resources 2013-11-27 11:26:28.857 Acquired Resources 2013-11-27 11:26:28.858 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL)MESSAGE:::Irrecoverable Errorpmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTableStatus Desc : FailedWorkFlowMessage : Error Message : Unknown reason for error code 36331ErrorCode : 36331EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1)
pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
2013-11-27 11:26:59.923 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has finished execution with Failed status.
====================================================================================================================
Could anyone please help me to resolve this error?
Regards,
NarottamDid you configured Informatica???
-
New to BIAPPS- Getting Error while loading HR PAYROLL
Hello,
I am installing BIApps for the first time on a Linux system, and have ensured all parameters to be set correctly as per the prescribed document.
- DAC is up and Running
- DB is running
- Informatica service is running
I have chosen the HR Payroll as part of my POC and am trying to run a Full Load for it, while doing so I got this error. Could anyone please tell me what could have gone wrong here?
Thanks,
Jay
2013-03-14 19:43:58.206 INFORMATICA TASK:SDE_ORAR1212_Adaptor:SDE_ORA_Flx_ListTmpLoad:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1212_Adaptor:SDE_ORA_Flx_ListTmpLoad:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_Flx_ListTmpLoad
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Thu Mar 14 19:44:19 2013
Connected to Integration Service: [BI_IS].
Integration Service status: [Running]
Integration Service startup time: [Mon Mar 11 18:38:00 2013]
Integration Service current time: [Thu Mar 14 19:44:20 2013]
Folder: [SDE_ORAR1212_Adaptor]
Workflow: [SDE_ORA_Flx_ListTmpLoad] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_Flx_ListTmpLoad] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Flx_ListTmpLoad] will be failed.]
Workflow run id [8].
Start time: [Thu Mar 14 19:43:59 2013]
End time: [Thu Mar 14 19:44:02 2013]
Workflow log file: [u01/oracle/informatica/server/infa_shared/WorkflowLogs/SDE_ORA_Flx_ListTmpLoad.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [BI_IS]
Disconnecting from Integration Service
Completed at Thu Mar 14 19:44:20 2013
=====================================
ERROR OUTPUT
=====================================
Re-Queue to attempt to run again or attach to running workflow
if Execution Plan is still running or re-submit Execution Plan to execute the workflow.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:179)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:585)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv BI_IS -d Domain_ssi.biw066.idc.oracle.com -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf /u01/oracle/informatica/server/infa_shared/SrcFiles/FlatFileConnection.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Flx_ListTmpLoad.txt SDE_ORA_Flx_ListTmpLoad
2013-03-14 19:44:20.443 INFORMATICA TASK:SDE_ORAR1212_Adaptor:SDE_ORA_Flx_ListTmpLoad:(Source : FULL Target : FULL) has finished execution with Failed status.
**********************************************************************************************************************************************************I got this message from the pmcmd file of informatica
FATAL ERROR during initialization:
%s
Application terminated.
FATAL ERROR during initialization:
%s
Application terminated.
Failed to Create Global Locale, Invalid language [%s] specified in environment variable INFA_LANGUAGE
Invalid CodePage name [%s] specified in environment variable INFA_CODEPAGENAME. codepage name specified in environment variable is not ASCII based -
Error running Execution plan for 'Project Analytics in PeopleSoft 9.0 '
Hi ,
I am running execution plan for Projects Peoplesoft 9.0 (BI Apps version 7.9.6)
The issue is the file type data source went thru the database (data warehouse)
the tasks that were completed SUCCESS were from the File source only from (SrcFiles).
error as below.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_PSFT_90_Adaptor:SDE_PSFT_ExchangeRateDimension_Full:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_PSFT_ExchangeRateDimension_Full
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
one more info,if this helps
values defined in the Parameters of the execution plan.
1 DATASOURCE ,DBConnection_OLAP is 'DataWarehouse'
1 DATASOURCE ,DBConnection_OLTP is 'PSFT_9_0_FINSCM'
1 DATASOURCE ,FlatFileConnection is 'PSFT_9_0_FlatFile'
The 'Relational Connection' In Informatica Repository Manager is currently pointing to only 'PSFT_9_0_FINSCM'
& 'DataWarehouse'
Please let me know what is wrong?
Regards,
JKHi ,
I created the PSFT connection in 'Applicaiton connection' of Repository manager.
Also the Informatica server's tnsnames.ora should have entry for the source( PSFT database) and that of the datawarehouse.
thanks,
JK -
Hello All,
I am running DAC and came across the following error...
Due to which some task are getting failed
Here i have written Detailed Explanation...
2012-06-19 09:08:04.545 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIA_IS -d Domain_BIserver -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf C:\Informatica\9.0.1\server\infa_shared\SrcFiles\\DataWarehouse.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_Stage_ARTransactionFact_DiffManDerive.txt SDE_ORA_Stage_ARTransactionFact_DiffManDerive
Status Desc : Failed
WorkFlowMessage :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], Windows 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Jun 19 08:08:26 2012
Connected to Integration Service: [BIA_IS].
Integration Service status: [Running]
Integration Service startup time: [Wed Jun 13 02:57:48 2012]
Integration Service current time: [Tue Jun 19 08:08:26 2012]
Folder: [SDE_ORAR1213_Adaptor]
Workflow: [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] will be failed.]
Workflow run id [2675].
Start time: [Tue Jun 19 08:08:05 2012]
End time: [Tue Jun 19 08:08:09 2012]
Workflow log file: [C:\Informatica\9.0.1\server\infa_shared\WorkflowLogs\SDE_ORA_Stage_ARTransactionFact_DiffManDerive.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [BIA_IS]
Disconnecting from Integration Service
Completed at Tue Jun 19 08:08:26 2012
=====================================
ERROR OUTPUT
=====================================
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1)
pmcmd startworkflow -sv BIA_IS -d Domain_BIserver -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf C:\Informatica\9.0.1\server\infa_shared\SrcFiles\\DataWarehouse.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_Stage_ARTransactionFact_DiffManDerive.txt SDE_ORA_Stage_ARTransactionFact_DiffManDerive
2012-06-19 09:08:27.305 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) has finished execution with Failed status.If you have successful runs in the past! just restart the load. IF it is very first load, or If it fails again try to send Informatica session log.
-
Getting error 36331 while running prebuilt etl for first time
Hi all,
I have installed BI apps 7.9.6 and OBIEE 10.1.3.4.1, DAC 10.13.4.1 on a Linux machine with Oracle 10gR2 as data base and EBS 11 i as the data source. I am running the prebuilt ETL for the first time for a new execution plan created with Financials-Receivables subject area added to it. Of the total 292 tasks 30 tasks run well and the ETL fails after that with the following error.
The following error message is from the DAC server log. I have seen the session logs and workflow logs for the SDE_ORA_CodeDimension_Supplier_Payment_Method task, but could figure out what could be the issue. Please let me know if any one has encountered the same issue.
=====================================
ERROR OUTPUT
=====================================
524 SEVERE Tue Sep 22 06:41:14 EDT 2009 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Supplier_Payment_Method
525 SEVERE Tue Sep 22 06:41:14 EDT 2009
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Supplier_Payment_Method
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
Thx
RMFound that the indices on tables are failing to be created while running the workflow. I have updated the status of the task as completed and re queued the task. ETL ran successfully then.
-
Help !!! Re: Fianacial Analytics failed with Error Code = 36331
I am getting an error exactly reported under another Post 'Re: Fianacial Analytics failed with Error Code = 36331'
workflow log shows DB error to OLTP database..
ERROR : LM_36488 [Wed Aug 19 15:05:52 2009] : (5928|2384) Session task instance [SDE_ORA_GLJournals_Full] : [TM_6193 An error occurred while expanding the connection parameter [Database connection name ORA_R12 for database connection variable $DBConnection_OLTP is not well defined.
Can someone point to where the probem is
I have Physical datasource definition of OLTP Warehouse -> Test Connection works fine -->I am unit Testing the activity SDE_ORA_GLJournals under Execution Plan, i can see an error.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR12_Adaptor:SDE_ORA_GLJournals_Full:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_GLJournals_Full
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
any ideas
girish -
DAC Workflow run error code: [36331]
Dear all ,
I want to Integrate OBIEE with Oracle R12.1.1
Initially I have defined new container & Phyiscal Data Sources in DAC
Datawarehouse Test Connection Successful
ORA_R1211 Test Connection Successful
FlatFile Connection ?
After that I created new Plan & generate the parameter and also built it successfully but when I run that execution plan it give error.
Please any one can help me regarding this issue.
also provide me step by step document to integrate OBIEE with Oracle R12.1.1
Regards,
YasirKindly See the log of last ETL run........
494 SEVERE Wed Dec 08 18:11:04 GMT+05:00 2010
START OF ETL
495 SEVERE Wed Dec 08 18:11:45 GMT+05:00 2010 Starting ETL Process.
496 SEVERE Wed Dec 08 18:11:50 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Parameters_Update' has completed with error code 0
497 SEVERE Wed Dec 08 18:12:12 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_Parameters_Update.txt SIL_Parameters_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
498 SEVERE Wed Dec 08 18:12:22 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_InsertRowInRunTable' has completed with error code 0
499 SEVERE Wed Dec 08 18:12:44 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
500 SEVERE Wed Dec 08 18:13:04 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_GlobalCurrencyGeneral_Update' has completed with error code 0
501 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccountDimension_FinSubCodes' has completed with error code 0
502 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GroupAccountNumberDimension' has completed with error code 0
503 SEVERE Wed Dec 08 18:13:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_LocalCurrency_Temporary' has completed with error code 0
504 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_Stage_GroupAccountNumberDimension_FinStatementItem' has completed with error code 0
505 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLJournals_Full' has completed with error code 0
506 SEVERE Wed Dec 08 18:13:13 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity' has completed with error code 0
507 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Extract_Full' has completed with error code 0
508 SEVERE Wed Dec 08 18:13:15 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_ListOfValuesGeneral_Unspecified' has completed with error code 0
509 SEVERE Wed Dec 08 18:13:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_ExchangeRateGeneral_Full' has completed with error code 0
510 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GroupAccountNumberDimension.txt SDE_ORA_Stage_GroupAccountNumberDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
511 SEVERE Wed Dec 08 18:13:41 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_Stage_GroupAccountNumberDimension_FinStatementItem.txt SIL_Stage_GroupAccountNumberDimension_FinStatementItem
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
512 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity.txt SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
513 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_CurrencyTypes' has completed with error code 0
514 SEVERE Wed Dec 08 18:14:18 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_GLAccount_SegmentConfig_Extract' has completed with error code 0
515 SEVERE Wed Dec 08 18:14:23 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_GlobalCurrencyGeneral_Update.txt SIL_GlobalCurrencyGeneral_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
516 SEVERE Wed Dec 08 18:14:30 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_LocalCurrency_Temporary.txt SDE_ORA_LocalCurrency_Temporary
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
517 SEVERE Wed Dec 08 18:14:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccountDimension_FinSubCodes.txt SDE_ORA_Stage_GLAccountDimension_FinSubCodes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
518 SEVERE Wed Dec 08 18:14:38 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.txt SDE_ORA_Stage_ValueSetHier_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
519 SEVERE Wed Dec 08 18:14:42 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_ListOfValuesGeneral_Unspecified.txt SIL_ListOfValuesGeneral_Unspecified
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
520 SEVERE Wed Dec 08 18:14:43 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSet_Extract' has completed with error code 0
521 SEVERE Wed Dec 08 18:14:49 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_ExchangeRateGeneral_Full.txt SDE_ORA_ExchangeRateGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
522 SEVERE Wed Dec 08 18:14:58 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GLSegmentDimension_Full' has completed with error code 0
523 SEVERE Wed Dec 08 18:15:05 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion' has completed with error code 0
524 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten' has completed with error code 0
525 SEVERE Wed Dec 08 18:15:10 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full' has completed with error code 0
526 SEVERE Wed Dec 08 18:15:17 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_TimeOfDayDimension' has completed with error code 0
527 SEVERE Wed Dec 08 18:16:04 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSet_Extract.txt SDE_ORA_Stage_ValueSet_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
528 SEVERE Wed Dec 08 18:16:16 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_GLAccount_SegmentConfig_Extract.txt SDE_ORA_Stage_GLAccount_SegmentConfig_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
529 SEVERE Wed Dec 08 18:16:17 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_CurrencyTypes.txt SIL_CurrencyTypes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
530 SEVERE Wed Dec 08 18:16:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLSegmentDimension_Full.txt SDE_ORA_GLSegmentDimension_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
531 SEVERE Wed Dec 08 18:16:28 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion.txt SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
532 SEVERE Wed Dec 08 18:16:57 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_Flatten.txt SDE_ORA_Stage_ValueSetHier_Flatten
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
533 SEVERE Wed Dec 08 18:17:22 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_Stage_ValueSetHier_DeriveRange' has completed with error code 0
534 SEVERE Wed Dec 08 18:17:31 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211_Flatfile.DataWarehouse.SILOS.SIL_TimeOfDayDimension.txt SIL_TimeOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
535 SEVERE Wed Dec 08 18:17:58 GMT+05:00 2010 Request to start workflow : 'SILOS:SIL_HourOfDayDimension' has completed with error code 0
536 SEVERE Wed Dec 08 18:18:21 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_HourOfDayDimension.txt SIL_HourOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
537 SEVERE Wed Dec 08 18:21:36 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_GLJournals_Full.txt SDE_ORA_GLJournals_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
538 SEVERE Wed Dec 08 18:22:12 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_PartyContactStaging_Full' has completed with error code 0
539 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap' has completed with error code 0
540 SEVERE Wed Dec 08 18:22:14 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Bank_Branch_Name' has completed with error code 0
541 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Cust_Class' has completed with error code 0
542 SEVERE Wed Dec 08 18:22:15 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Uom_Code' has completed with error code 0
543 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_CostCenter' has completed with error code 0
544 SEVERE Wed Dec 08 18:22:16 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_UserDimension_Full' has completed with error code 0
545 SEVERE Wed Dec 08 18:22:27 GMT+05:00 2010 Request to start workflow : 'SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method' has completed with error code 0
546 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.1 HotFix11], build [457.0505], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Wed Dec 08 18:23:43 2010
Connected to Integration Service: [Oracle_BI_DW_Base_Intergration_Service].
Integration Service status: [Running]
Integration Service startup time: [Wed Dec 08 17:05:35 2010]
Integration Service current time: [Wed Dec 08 18:23:46 2010]
Folder: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_CodeDimension_Payterm_Ap] version [1].
Workflow run status: [Failed]
Workflow run error code: [36331]
Workflow run error message: [WARNING: Session task instance [SDE_ORA_CodeDimension_Payterm_Ap] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_CodeDimension_Payterm_Ap] will be failed.]
Workflow run id [103].
Start time: [Wed Dec 08 18:22:13 2010]
End time: [Wed Dec 08 18:23:38 2010]
Workflow log file: [F:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_CodeDimension_Payterm_Ap.log]
Workflow run type: [User request]
Run workflow as user: [Administrator]
Run workflow with Impersonated OSProfile in domain: []
Integration Service: [Oracle_BI_DW_Base_Intergration_Service]
Disconnecting from Integration Service
Completed at Wed Dec 08 18:23:46 2010
=====================================
ERROR OUTPUT
=====================================
547 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Payterm_Ap
548 SEVERE Wed Dec 08 18:23:46 GMT+05:00 2010
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1211_Adaptor:SDE_ORA_CodeDimension_Payterm_Ap:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Payterm_Ap
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
=====================================
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:469)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::Execution of child batch Informatica Session Batch failed.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.FailedTaskException
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecuteNormal(ParallelTaskBatch.java:340)
com.siebel.analytics.etl.etltask.ParallelTaskBatch.doExecute(ParallelTaskBatch.java:164)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.etl.engine.core.Session.executeTasks(Session.java:2697)
com.siebel.etl.engine.core.Session.run(Session.java:3246)
java.lang.Thread.run(Thread.java:619)
954 SEVERE Wed Dec 08 18:31:34 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SDE_ORAR1211_Adaptor -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1211_Adaptor.SDE_ORA_Stage_ValueSetHier_DeriveRange.txt SDE_ORA_Stage_ValueSetHier_DeriveRange
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
955 SEVERE Wed Dec 08 18:32:25 GMT+05:00 2010 pmcmd startworkflow -sv Oracle_BI_DW_Base_Intergration_Service -d Domain_srv-007 -u Administrator -p **** -f SILOS -lpf F:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_GLLinkageInformationGeneral_Full.txt SIL_GLLinkageInformationGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
956 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 ETL seems to have completed. Invoking shut down dispatcher after the notification from the last running task.
957 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Finishing ETL Process.
958 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 MESSAGE:::Some steps failed.
EXCEPTION CLASS::: com.siebel.etl.engine.bore.SomeSessionsFailedException
com.siebel.etl.engine.bore.NewDispatcher.execute(NewDispatcher.java:302)
com.siebel.etl.engine.bore.NewDispatcher.run(NewDispatcher.java:121)
java.lang.Thread.run(Thread.java:619)
959 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Dispatcher thread completed.
960 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010 Number of incomplete tasks whose status got updated to stopped :0
Number of incomplete task details whose status got updated to stopped :2630
961 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
* CLOSING THE CONNECTION POOL DataWarehouse
962 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
* CLOSING THE CONNECTION POOL ORA_R1211
963 SEVERE Wed Dec 08 18:32:43 GMT+05:00 2010
END OF ETL
-------------------------------------------- -
When executing Finance Module, I am getting error in Workflow
Hi,
When I started workflow for financial module, It gets stuck at SILOS:SIL_InsertRowInRunTable workflow. I dont know what is the problem actually. I try to change user name for integration services but it wont work.
Please help me out in this problem as i am new to OBIA and Informatica.
This is the log file for my error...
+2010-06-30 12:05:08.939 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:(Source : FULL Target : FULL) has started.+
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Request to start workflow : 'SIL_InsertRowInRunTable' has completed with error code 7
Error Message : You used an invalid username or password.
Command Used: pmcmd startworkflow -sv BIAPPS_INT -d Domain_BIDPOOLW42S0004 -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.0\server\infa_shared\SrcFiles\FlatFileConnection.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
Workflow Message:
+=====================================+
STD OUTPUT
+=====================================+
Informatica(r) PMCMD, version [8.6.0], build [178.0613], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Wed Jun 30 12:05:13 2010
+ERROR: Failed to authenticate login. [PCSF_10342] [PCSF_10342] Exception occurred: [[AUTHEN_10000] The Service Manager failed to authenticate user [Administrator] in security domain [Native].].+
Disconnecting from Integration Service
Completed at Wed Jun 30 12:05:13 2010
+=====================================+
ERROR OUTPUT
+=====================================+
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:179)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:410)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:306)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:213)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:585)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
+(Number of retries : 1)+
pmcmd startworkflow -sv BIAPPS_INT -d Domain_BIDPOOLW42S0004 -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.0\server\infa_shared\SrcFiles\FlatFileConnection.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
+2010-06-30 12:05:13.548 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:(Source : FULL Target : FULL) has finished execution with Failed status+Looks like invalid Informatica credentials.
Try to issue a pmrep connect with the same credentials that you have entered in DAC.
HTH,
AW -
Satellite P30-128: Power Management installation error code: 0x7E
Hello, I formatted my notebook yesterday, and I couldn't install Power Management software correctly. When installation is complete, i get "Irrecoverable error. Program will be closed. Code: 0x7E"
Can anyone help me please?Hi Simone
In this forum you will find many topics about this power saver error. Try to use the advanced search.
Generally this error occurs it the user doesn't use the Toshiba recovery CD but only the original Microsoft OS.
But According to other topics there is no explicit solution.
It's very important that you will install the Toshiba drivers in the right order.
Check the installation instruction on the Toshiba driver page. -
Unknown reason for error code 36331 in DAC run
Hi,
While running full load i am getting following error
Can any one give me the solution
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_123 -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 01:41:19.126 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.HI Srini,
I had copied Src files from BIApps to informatica Src file
While running DAC11g full load, we are en counting some issues below is the error we are facing
ERROR CODE - Unknown reason for error code 36331
one more thing to consider, In DAC10g we give /Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SrcFiles as Informatica parameter path in DAC system properties but in DAC11g if i take same path no task is running, it is failing at first task only and no parameter file is generating.
But if i give dafault in that Informatica parameter path of DAC11g some tasks are running success and i am able to see some parameters generated in DAC PATH, but Default is taking
/Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters path for that location.
Informatica Server details are Success, Physical Data sorce are success.
I had copied SrcFiles and LkpFiles to informatica from BIApps.
ParameterDW and parameterOLTP are moved to /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters as well as Informatica Src folder
for one task below is the error
2013-02-07 21:50:17.515 Acquiring Resources
2013-02-07 21:50:17.517 Acquired Resources
2013-02-07 21:50:17.519 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 21:50:46.989 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.
Maybe you are looking for
-
Extraction of purchase requistions
Hi, I was under the impression that 2LIS_02_HDR (and ITM and SCL) should be able to extract purchase requisition info alongside PO's. However, no records are shown, and when filling the setup table no PR numbers appear for selection. Are the extracto
-
Mainstream maintenance for SAP B1 2005A SP1 will end on July 31. Will SAP stop to support clients with 2005A SP1? The same questions regarding SQL2000. If some of the customers has SQL 2000 will SAP stop to support them? Thanks, Olga
-
Restrict SaTy for 1 Customer in a Sales Org
Hello, I have a scenario where a specific sales document type is to be restricted for 1 customer. All other customers for the particular Sales Org / Dist Channel / Division are to use this sales document type except for this customer, and my user wo
-
The Firewire drivers are not loaded
Hi, The title of this post says it all. When using system profiler I get the message " The Firewire drivers are not loaded " in red letters. The Mac is a 2Ghz intel. So far I have... 1. Done all the usual maintenance. Erased the internal drive and re
-
Dear Am using SAP Business Objects 4.0 My scenario Is , I want to create Schedule , If the Web reports have data, i want to send it to User A,B,C But if the Web reports have no data , I want to send it to User D And E In other way How can i create Sc