Is an initramfs mandatory in Arch Linux?

I intend to compile my own kernel.
I've done that many times on other Linuxes.
I never used an intramfs on those.
The default kernel contains a lot of modules for hardware I don't have.
I have a pci soundcard next to the onboard hdmaudio.
Even though I disabled onboard sound in the bios it shows up in KDE system settings.
And screws up my sound I think.
Any reason why an initramfs is needed?
Gerard.

Take a look at https://wiki.archlinux.org/index.php/Modprobed_db.
It has nothing to do with initramfs but it decreases the number of modules really well.
Last edited by Radioactiveman (2012-05-31 15:48:29)

Similar Messages

  • System encryption using LUKS and GPG encrypted keys for arch linux

    Update: As of 2012-03-28, arch changed from gnupg 1.4 to 2.x which uses pinentry for the password dialog. The "etwo" hook described here doesn't work with gnupg 2. Either use the openssl hook below or use a statically compiled version of gnupg 1.4.
    Update: As of 2012-12-19, the mkinitcpio is not called during boot, unless the "install" file for the hook contains "add_runscript". This resulted in an unbootable system for me. Also, the method name was changed from install () to build ().
    Update: 2013-01-13: Updated the hook files using the corrections by Deth.
    Note: This guide is a bit dated now, in particular the arch installation might be different now. But essentially, the approach stays the same. Please also take a look at the posts further down, specifically the alternative hooks that use openssl.
    I always wanted to set up a fully encrypted arch linux server that uses gpg encrypted keyfiles on an external usb stick and luks for root filesystem encryption. I already did it once in gentoo using this guide. For arch, I had to play alot with initcpio hooks and after one day of experimentation, I finally got it working. I wrote a little guide for myself which I'm going to share here for anyone that might be interested. There might be better or easier ways, like I said this is just how I did it. I hope it might help someone else. Constructive feedback is always welcome
    Intro
    Using arch linux mkinitcpio's encrypt hook, one can easily use encrypted root partitions with LUKS. It's also possible to use key files stored on an external drive, like an usb stick. However, if someone steals your usb stick, he can just copy the key and potentially access the system. I wanted to have a little extra security by additionally encrypting the key file with gpg using a symmetric cipher and a passphrase.
    Since the encrypt hook doesn't support this scenario, I created a modifed hook called “etwo” (silly name I know, it was the first thing that came to my mind). It will simply look if the key file has the extension .gpg and, if yes, use gpg to decrypt it, then pipe the result into cryptsetup.
    Conventions
    In this short guide, I use the following disk/partition names:
    /dev/sda: is the hard disk that will contain an encrypted swap (/dev/sda1), /var (/dev/sda2) and root (/dev/sda3) partition.
    /dev/sdb is the usb stick that will contain the gpg encrypted luks keys, the kernel and grub. It will have one partition /dev/sdb1 formatted with ext2.
    /dev/mapper/root, /dev/mapper/swap and /dev/mapper/var will be the encrypted devices.
    Credits
    Thanks to the authors of SECURITY_System_Encryption_DM-Crypt_with_LUKS (gentoo wiki), System Encryption with LUKS (arch wiki), mkinitcpio (arch wiki) and Early Userspace in Arch Linux (/dev/brain0 blog)!
    Guide
    1. Boot the arch live cd
    I had to use a newer testing version, because the 2010.05 cd came with a broken gpg. You can download one here: http://releng.archlinux.org/isos/. I chose the “core“ version. Go ahead and boot the live cd, but don't start the setup yet.
    2. Set keymap
    Use km to set your keymap. This is important for non-qwerty keyboards to avoid suprises with passphrases...
    3. Wipe your discs
    ATTENTION: this will DELETE everything on /dev/sda and /dev/sdb forever! Do not blame me for any lost data!
    Before encrypting the hard disc, it has to be completely wiped and overwritten with random data. I used shred for this. Others use badblocks or dd with /dev/urandom. Either way, this will take a long time, depending on the size of your disc. I also wiped my usb stick just to be sure.
    shred -v /dev/sda
    shred -v /dev/sdb
    4. Partitioning
    Fire up fdisk and create the following partitions:
    /dev/sda1, type linux swap.
    /dev/sda2: type linux
    /dev/sda3: type linux
    /dev/sdb1, type linux
    Of course you can choose a different layout, this is just how I did it. Keep in mind that only the root filesystem will be decrypted by the initcpio. The rest will be decypted during normal init boot using /etc/crypttab, the keys being somewhere on the root filesystem.
    5. Format  and mount the usb stick
    Create an ext2 filesystem on /dev/sdb1:
    mkfs.ext2 /dev/sdb1
    mkdir /root/usb
    mount /dev/sdb1 /root/usb
    cd /root/usb # this will be our working directory for now.
    Do not mount anything to /mnt, because the arch installer will use that directory later to mount the encrypted root filesystem.
    6. Configure the network (if not already done automatically)
    ifconfig eth0 192.168.0.2 netmask 255.255.255.0
    route add default gw 192.168.0.1
    echo "nameserver 192.168.0.1" >> /etc/resolv.conf
    (this is just an example, your mileage may vary)
    7. Install gnupg
    pacman -Sy
    pacman -S gnupg
    Verify that gnupg works by launching gpg.
    8. Create the keys
    Just to be sure, make sure swap is off:
    cat /proc/swaps
    should return no entries.
    Create gpg encrypted keys (remember, we're still in our working dir /root/usb):
    dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > root.gpg
    dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > var.gpg
    Choose a strong password!!
    Don't do this in two steps, e.g don't do dd to a file and then gpg on that file. The key should never be stored in plain text on an unencrypted device, except if that device is wiped on system restart (ramfs)!
    Note that the default cipher for gpg is cast5, I just chose to use a different one.
    9. Create the encrypted devices with cryptsetup
    Create encrypted swap:
    cryptsetup -c aes-cbc-essiv:sha256 -s 256 -h whirlpool -d /dev/urandom create swap /dev/sda1
    You should see /dev/mapper/swap now. Don't format nor turn it on for now. This will be done by the arch installer.
    Important: From the Cryptsetup 1.1.2 Release notes:
    Cryptsetup can accept passphrase on stdin (standard input). Handling of new line (\n) character is defined by input specification:
        if keyfile is specified as "-" (using --key-file=- or by positional argument in luksFormat and luksAddKey, like cat file | cryptsetup --key-file=- <action> ), input is processed
          as normal binary file and no new line is interpreted.
        if there is no key file specification (with default input from stdin pipe like echo passphrase | cryptsetup <action> ) input is processed as input from terminal, reading will
          stop after new line is detected.
    If I understand this correctly, since the randomly generated key can contain a newline early on, piping the key into cryptsetup without specifying --key-file=- could result in a big part of the key to be ignored by cryptsetup. Example: if the random key was "foo\nandsomemorebaratheendofthekey", piping it directly into cryptsetup without --key-file=- would result in cryptsetup using only "foo" as key which would have big security implications. We should therefor ALWAYS pipe the key into cryptsetup using --key-file=- which ignores newlines.
    gpg -q -d root.gpg 2>/dev/null | cryptsetup -v -–key-file=- -c aes-cbc-essiv:sha256 -s 256 -h whirlpool luksFormat /dev/sda3
    gpg -q -d var.gpg 2>/dev/null | cryptsetup -v –-key-file=- -c aes-cbc-essiv:sha256 -s 256 -h whirlpool -v luksFormat /dev/sda2
    Check for any errors.
    10. Open the luks devices
    gpg -d root.gpg 2>/dev/null | cryptsetup -v –-key-file=- luksOpen /dev/sda3 root
    gpg -d var.gpg 2>/dev/null | cryptsetup -v –-key-file=- luksOpen /dev/sda2 var
    If you see /dev/mapper/root and /dev/mapper/var now, everything is ok.
    11. Start the installer /arch/setup
    Follow steps 1 to 3.
    At step 4 (Prepare hard drive(s), select “3 – Manually Configure block devices, filesystems and mountpoints. Choose /dev/sdb1 (the usb stick) as /boot, /dev/mapper/swap for swap, /dev/mapper/root for / and /dev/mapper/var for /var.
    Format all drives (choose “yes” when asked “do you want to have this filesystem (re)created”) EXCEPT for /dev/sdb1, choose “no”. Choose the correct filesystem for /dev/sdb1, ext2 in my case. Use swap for /dev/mapper/swap. For the rest, I chose ext4.
    Select DONE to start formatting.
    At step 5 (Select packages), select grub as boot loader. Select the base group. Add mkinitcpio.
    Start step 6 (Install packages).
    Go to step 7 (Configure System).
    By sure to set the correct KEYMAP, LOCALE and TIMEZONE in /etc/rc.conf.
    Edit /etc/fstab:
    /dev/mapper/root / ext4 defaults 0 1
    /dev/mapper/swap swap swap defaults 0 0
    /dev/mapper/var /var ext4 defaults 0 1
    # /dev/sdb1 /boot ext2 defaults 0 1
    Configure the rest normally. When you're done, setup will launch mkinitcpio. We'll manually launch this again later.
    Go to step 8 (install boot loader).
    Be sure to change the kernel line in menu.lst:
    kernel /vmlinuz26 root=/dev/mapper/root cryptdevice=/dev/sda3:root cryptkey=/dev/sdb1:ext2:/root.gpg
    Don't forget the :root suffix in cryptdevice!
    Also, my root line was set to (hd1,0). Had to change that to
    root (hd0,0)
    Install grub to /dev/sdb (the usb stick).
    Now, we can exit the installer.
    12. Install mkinitcpio with the etwo hook.
    Create /mnt/lib/initcpio/hooks/etwo:
    #!/usr/bin/ash
    run_hook() {
    /sbin/modprobe -a -q dm-crypt >/dev/null 2>&1
    if [ -e "/sys/class/misc/device-mapper" ]; then
    if [ ! -e "/dev/mapper/control" ]; then
    /bin/mknod "/dev/mapper/control" c $(cat /sys/class/misc/device-mapper/dev | sed 's|:| |')
    fi
    [ "${quiet}" = "y" ] && CSQUIET=">/dev/null"
    # Get keyfile if specified
    ckeyfile="/crypto_keyfile"
    usegpg="n"
    if [ "x${cryptkey}" != "x" ]; then
    ckdev="$(echo "${cryptkey}" | cut -d: -f1)"
    ckarg1="$(echo "${cryptkey}" | cut -d: -f2)"
    ckarg2="$(echo "${cryptkey}" | cut -d: -f3)"
    if poll_device "${ckdev}" ${rootdelay}; then
    case ${ckarg1} in
    *[!0-9]*)
    # Use a file on the device
    # ckarg1 is not numeric: ckarg1=filesystem, ckarg2=path
    if [ "${ckarg2#*.}" = "gpg" ]; then
    ckeyfile="${ckeyfile}.gpg"
    usegpg="y"
    fi
    mkdir /ckey
    mount -r -t ${ckarg1} ${ckdev} /ckey
    dd if=/ckey/${ckarg2} of=${ckeyfile} >/dev/null 2>&1
    umount /ckey
    # Read raw data from the block device
    # ckarg1 is numeric: ckarg1=offset, ckarg2=length
    dd if=${ckdev} of=${ckeyfile} bs=1 skip=${ckarg1} count=${ckarg2} >/dev/null 2>&1
    esac
    fi
    [ ! -f ${ckeyfile} ] && echo "Keyfile could not be opened. Reverting to passphrase."
    fi
    if [ -n "${cryptdevice}" ]; then
    DEPRECATED_CRYPT=0
    cryptdev="$(echo "${cryptdevice}" | cut -d: -f1)"
    cryptname="$(echo "${cryptdevice}" | cut -d: -f2)"
    else
    DEPRECATED_CRYPT=1
    cryptdev="${root}"
    cryptname="root"
    fi
    warn_deprecated() {
    echo "The syntax 'root=${root}' where '${root}' is an encrypted volume is deprecated"
    echo "Use 'cryptdevice=${root}:root root=/dev/mapper/root' instead."
    if poll_device "${cryptdev}" ${rootdelay}; then
    if /sbin/cryptsetup isLuks ${cryptdev} >/dev/null 2>&1; then
    [ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
    dopassphrase=1
    # If keyfile exists, try to use that
    if [ -f ${ckeyfile} ]; then
    if [ "${usegpg}" = "y" ]; then
    # gpg tty fixup
    if [ -e /dev/tty ]; then mv /dev/tty /dev/tty.backup; fi
    cp -a /dev/console /dev/tty
    while [ ! -e /dev/mapper/${cryptname} ];
    do
    sleep 2
    /usr/bin/gpg -d "${ckeyfile}" 2>/dev/null | cryptsetup --key-file=- luksOpen ${cryptdev} ${cryptname} ${CSQUIET}
    dopassphrase=0
    done
    rm /dev/tty
    if [ -e /dev/tty.backup ]; then mv /dev/tty.backup /dev/tty; fi
    else
    if eval /sbin/cryptsetup --key-file ${ckeyfile} luksOpen ${cryptdev} ${cryptname} ${CSQUIET}; then
    dopassphrase=0
    else
    echo "Invalid keyfile. Reverting to passphrase."
    fi
    fi
    fi
    # Ask for a passphrase
    if [ ${dopassphrase} -gt 0 ]; then
    echo ""
    echo "A password is required to access the ${cryptname} volume:"
    #loop until we get a real password
    while ! eval /sbin/cryptsetup luksOpen ${cryptdev} ${cryptname} ${CSQUIET}; do
    sleep 2;
    done
    fi
    if [ -e "/dev/mapper/${cryptname}" ]; then
    if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
    export root="/dev/mapper/root"
    fi
    else
    err "Password succeeded, but ${cryptname} creation failed, aborting..."
    exit 1
    fi
    elif [ -n "${crypto}" ]; then
    [ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
    msg "Non-LUKS encrypted device found..."
    if [ $# -ne 5 ]; then
    err "Verify parameter format: crypto=hash:cipher:keysize:offset:skip"
    err "Non-LUKS decryption not attempted..."
    return 1
    fi
    exe="/sbin/cryptsetup create ${cryptname} ${cryptdev}"
    tmp=$(echo "${crypto}" | cut -d: -f1)
    [ -n "${tmp}" ] && exe="${exe} --hash \"${tmp}\""
    tmp=$(echo "${crypto}" | cut -d: -f2)
    [ -n "${tmp}" ] && exe="${exe} --cipher \"${tmp}\""
    tmp=$(echo "${crypto}" | cut -d: -f3)
    [ -n "${tmp}" ] && exe="${exe} --key-size \"${tmp}\""
    tmp=$(echo "${crypto}" | cut -d: -f4)
    [ -n "${tmp}" ] && exe="${exe} --offset \"${tmp}\""
    tmp=$(echo "${crypto}" | cut -d: -f5)
    [ -n "${tmp}" ] && exe="${exe} --skip \"${tmp}\""
    if [ -f ${ckeyfile} ]; then
    exe="${exe} --key-file ${ckeyfile}"
    else
    exe="${exe} --verify-passphrase"
    echo ""
    echo "A password is required to access the ${cryptname} volume:"
    fi
    eval "${exe} ${CSQUIET}"
    if [ $? -ne 0 ]; then
    err "Non-LUKS device decryption failed. verify format: "
    err " crypto=hash:cipher:keysize:offset:skip"
    exit 1
    fi
    if [ -e "/dev/mapper/${cryptname}" ]; then
    if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
    export root="/dev/mapper/root"
    fi
    else
    err "Password succeeded, but ${cryptname} creation failed, aborting..."
    exit 1
    fi
    else
    err "Failed to open encryption mapping: The device ${cryptdev} is not a LUKS volume and the crypto= paramater was not specified."
    fi
    fi
    rm -f ${ckeyfile}
    fi
    Create /mnt/lib/initcpio/install/etwo:
    #!/bin/bash
    build() {
    local mod
    add_module dm-crypt
    if [[ $CRYPTO_MODULES ]]; then
    for mod in $CRYPTO_MODULES; do
    add_module "$mod"
    done
    else
    add_all_modules '/crypto/'
    fi
    add_dir "/dev/mapper"
    add_binary "cryptsetup"
    add_binary "dmsetup"
    add_binary "/usr/bin/gpg"
    add_file "/usr/lib/udev/rules.d/10-dm.rules"
    add_file "/usr/lib/udev/rules.d/13-dm-disk.rules"
    add_file "/usr/lib/udev/rules.d/95-dm-notify.rules"
    add_file "/usr/lib/initcpio/udev/11-dm-initramfs.rules" "/usr/lib/udev/rules.d/11-dm-initramfs.rules"
    add_runscript
    help ()
    cat<<HELPEOF
    This hook allows for an encrypted root device with support for gpg encrypted key files.
    To use gpg, the key file must have the extension .gpg and you have to install gpg and add /usr/bin/gpg
    to your BINARIES var in /etc/mkinitcpio.conf.
    HELPEOF
    Edit /mnt/etc/mkinitcpio.conf (only relevant sections displayed):
    MODULES=”ext2 ext4” # not sure if this is really nessecary.
    BINARIES=”/usr/bin/gpg” # this could probably be done in install/etwo...
    HOOKS=”base udev usbinput keymap autodetect pata scsi sata usb etwo filesystems” # (usbinput is only needed if you have an usb keyboard)
    Copy the initcpio stuff over to the live cd:
    cp /mnt/lib/initcpio/hooks/etwo /lib/initcpio/hooks/
    cp /mnt/lib/initcpio/install/etwo /lib/initcpio/install/
    cp /mnt/etc/mkinitcpio.conf /etc/
    Verify your LOCALE, KEYMAP and TIMEZONE in /etc/rc.conf!
    Now reinstall the initcpio:
    mkinitcpio -g /mnt/boot/kernel26.img
    Make sure there were no errors and that all hooks were included.
    13. Decrypt the "var" key to the encrypted root
    mkdir /mnt/keys
    chmod 500 /mnt/keys
    gpg –output /mnt/keys/var -d /mnt/boot/var.gpg
    chmod 400 /mnt/keys/var
    14. Setup crypttab
    Edit /mnt/etc/crypttab:
    swap /dev/sda1 SWAP -c aes-cbc-essiv:sha256 -s 256 -h whirlpool
    var /dev/sda2 /keys/var
    15. Reboot
    We're done, you may reboot. Make sure you select the usb stick as the boot device in your bios and hope for the best. . If it didn't work, play with grub's settings or boot from the live cd, mount your encrypted devices and check all settings. You might also have less trouble by using uuid's instead of device names.  I chose device names to keep things as simple as possible, even though it's not the optimal way to do it.
    Make backups of your data and your usb stick and do not forget your password(s)! Or you can say goodbye to your data forever...
    Last edited by fabriceb (2013-01-15 22:36:23)

    I'm trying to run my install script that is based on https://bbs.archlinux.org/viewtopic.php?id=129885
    Decrypting the gpg key after grub works, but then "Devce root already exists." appears every second.
    any idea ?
    #!/bin/bash
    # This script is designed to be run in conjunction with a UEFI boot using Archboot intall media.
    # prereqs:
    # EFI "BIOS" set to boot *only* from EFI
    # successful EFI boot of Archboot USB
    # mount /dev/sdb1 /src
    set -o nounset
    #set -o errexit
    # Host specific configuration
    # this whole script needs to be customized, particularly disk partitions
    # and configuration, but this section contains global variables that
    # are used during the system configuration phase for convenience
    HOSTNAME=daniel
    USERNAME=user
    # Globals
    # We don't need to set these here but they are used repeatedly throughout
    # so it makes sense to reuse them and allow an easy, one-time change if we
    # need to alter values such as the install target mount point.
    INSTALL_TARGET="/install"
    HR="--------------------------------------------------------------------------------"
    PACMAN="pacman --noconfirm --config /tmp/pacman.conf"
    TARGET_PACMAN="pacman --noconfirm --config /tmp/pacman.conf -r ${INSTALL_TARGET}"
    CHROOT_PACMAN="pacman --noconfirm --cachedir /var/cache/pacman/pkg --config /tmp/pacman.conf -r ${INSTALL_TARGET}"
    FILE_URL="file:///packages/core-$(uname -m)/pkg"
    FTP_URL='ftp://mirrors.kernel.org/archlinux/$repo/os/$arch'
    HTTP_URL='http://mirrors.kernel.org/archlinux/$repo/os/$arch'
    # Functions
    # I've avoided using functions in this script as they aren't required and
    # I think it's more of a learning tool if you see the step-by-step
    # procedures even with minor duplciations along the way, but I feel that
    # these functions clarify the particular steps of setting values in config
    # files.
    SetValue () {
    # EXAMPLE: SetValue VARIABLENAME '\"Quoted Value\"' /file/path
    VALUENAME="$1" NEWVALUE="$2" FILEPATH="$3"
    sed -i "s+^#\?\(${VALUENAME}\)=.*$+\1=${NEWVALUE}+" "${FILEPATH}"
    CommentOutValue () {
    VALUENAME="$1" FILEPATH="$2"
    sed -i "s/^\(${VALUENAME}.*\)$/#\1/" "${FILEPATH}"
    UncommentValue () {
    VALUENAME="$1" FILEPATH="$2"
    sed -i "s/^#\(${VALUENAME}.*\)$/\1/" "${FILEPATH}"
    # Initialize
    # Warn the user about impending doom, set up the network on eth0, mount
    # the squashfs images (Archboot does this normally, we're just filling in
    # the gaps resulting from the fact that we're doing a simple scripted
    # install). We also create a temporary pacman.conf that looks for packages
    # locally first before sourcing them from the network. It would be better
    # to do either *all* local or *all* network but we can't for two reasons.
    # 1. The Archboot installation image might have an out of date kernel
    # (currently the case) which results in problems when chrooting
    # into the install mount point to modprobe efivars. So we use the
    # package snapshot on the Archboot media to ensure our kernel is
    # the same as the one we booted with.
    # 2. Ideally we'd source all local then, but some critical items,
    # notably grub2-efi variants, aren't yet on the Archboot media.
    # Warn
    timer=9
    echo -e "\n\nMAC WARNING: This script is not designed for APPLE MAC installs and will potentially misconfigure boot to your existing OS X installation. STOP NOW IF YOU ARE ON A MAC.\n\n"
    echo -n "GENERAL WARNING: This procedure will completely format /dev/sda. Please cancel with ctrl-c to cancel within $timer seconds..."
    while [[ $timer -gt 0 ]]
    do
    sleep 1
    let timer-=1
    echo -en "$timer seconds..."
    done
    echo "STARTING"
    # Get Network
    echo -n "Waiting for network address.."
    #dhclient eth0
    dhcpcd -p eth0
    echo -n "Network address acquired."
    # Mount packages squashfs images
    umount "/packages/core-$(uname -m)"
    umount "/packages/core-any"
    rm -rf "/packages/core-$(uname -m)"
    rm -rf "/packages/core-any"
    mkdir -p "/packages/core-$(uname -m)"
    mkdir -p "/packages/core-any"
    modprobe -q loop
    modprobe -q squashfs
    mount -o ro,loop -t squashfs "/src/packages/archboot_packages_$(uname -m).squashfs" "/packages/core-$(uname -m)"
    mount -o ro,loop -t squashfs "/src/packages/archboot_packages_any.squashfs" "/packages/core-any"
    # Create temporary pacman.conf file
    cat << PACMANEOF > /tmp/pacman.conf
    [options]
    Architecture = auto
    CacheDir = ${INSTALL_TARGET}/var/cache/pacman/pkg
    CacheDir = /packages/core-$(uname -m)/pkg
    CacheDir = /packages/core-any/pkg
    [core]
    Server = ${FILE_URL}
    Server = ${FTP_URL}
    Server = ${HTTP_URL}
    [extra]
    Server = ${FILE_URL}
    Server = ${FTP_URL}
    Server = ${HTTP_URL}
    #Uncomment to enable pacman -Sy yaourt
    [archlinuxfr]
    Server = http://repo.archlinux.fr/\$arch
    PACMANEOF
    # Prepare pacman
    [[ ! -d "${INSTALL_TARGET}/var/cache/pacman/pkg" ]] && mkdir -m 755 -p "${INSTALL_TARGET}/var/cache/pacman/pkg"
    [[ ! -d "${INSTALL_TARGET}/var/lib/pacman" ]] && mkdir -m 755 -p "${INSTALL_TARGET}/var/lib/pacman"
    ${PACMAN} -Sy
    ${TARGET_PACMAN} -Sy
    # Install prereqs from network (not on archboot media)
    echo -e "\nInstalling prereqs...\n$HR"
    #sed -i "s/^#S/S/" /etc/pacman.d/mirrorlist # Uncomment all Server lines
    UncommentValue S /etc/pacman.d/mirrorlist # Uncomment all Server lines
    ${PACMAN} --noconfirm -Sy gptfdisk btrfs-progs-unstable libusb-compat gnupg
    # Configure Host
    # Here we create three partitions:
    # 1. efi and /boot (one partition does double duty)
    # 2. swap
    # 3. our encrypted root
    # Note that all of these are on a GUID partition table scheme. This proves
    # to be quite clean and simple since we're not doing anything with MBR
    # boot partitions and the like.
    echo -e "format\n"
    # shred -v /dev/sda
    # disk prep
    sgdisk -Z /dev/sda # zap all on disk
    #sgdisk -Z /dev/mmcb1k0 # zap all on sdcard
    sgdisk -a 2048 -o /dev/sda # new gpt disk 2048 alignment
    #sgdisk -a 2048 -o /dev/mmcb1k0
    # create partitions
    sgdisk -n 1:0:+200M /dev/sda # partition 1 (UEFI BOOT), default start block, 200MB
    sgdisk -n 2:0:+4G /dev/sda # partition 2 (SWAP), default start block, 200MB
    sgdisk -n 3:0:0 /dev/sda # partition 3, (LUKS), default start, remaining space
    #sgdisk -n 1:0:1800M /dev/mmcb1k0 # root.gpg
    # set partition types
    sgdisk -t 1:ef00 /dev/sda
    sgdisk -t 2:8200 /dev/sda
    sgdisk -t 3:8300 /dev/sda
    #sgdisk -t 1:0700 /dev/mmcb1k0
    # label partitions
    sgdisk -c 1:"UEFI Boot" /dev/sda
    sgdisk -c 2:"Swap" /dev/sda
    sgdisk -c 3:"LUKS" /dev/sda
    #sgdisk -c 1:"Key" /dev/mmcb1k0
    echo -e "create gpg file\n"
    # create gpg file
    dd if=/dev/urandom bs=512 count=4 | gpg -v --cipher-algo aes256 --digest-algo sha512 -c -a > /root/root.gpg
    echo -e "format LUKS on root\n"
    # format LUKS on root
    gpg -q -d /root/root.gpg 2>/dev/null | cryptsetup -v --key-file=- -c aes-xts-plain -s 512 --hash sha512 luksFormat /dev/sda3
    echo -e "open LUKS on root\n"
    gpg -d /root/root.gpg 2>/dev/null | cryptsetup -v --key-file=- luksOpen /dev/sda3 root
    # NOTE: make sure to add dm_crypt and aes_i586 to MODULES in rc.conf
    # NOTE2: actually this isn't required since we're mounting an encrypted root and grub2/initramfs handles this before we even get to rc.conf
    # make filesystems
    # following swap related commands not used now that we're encrypting our swap partition
    #mkswap /dev/sda2
    #swapon /dev/sda2
    #mkfs.ext4 /dev/sda3 # this is where we'd create an unencrypted root partition, but we're using luks instead
    echo -e "\nCreating Filesystems...\n$HR"
    # make filesystems
    mkfs.ext4 /dev/mapper/root
    mkfs.vfat -F32 /dev/sda1
    #mkfs.vfat -F32 /dev/mmcb1k0p1
    echo -e "mount targets\n"
    # mount target
    #mount /dev/sda3 ${INSTALL_TARGET} # this is where we'd mount the unencrypted root partition
    mount /dev/mapper/root ${INSTALL_TARGET}
    # mount target
    mkdir ${INSTALL_TARGET}
    # mkdir ${INSTALL_TARGET}/key
    # mount -t vfat /dev/mmcb1k0p1 ${INSTALL_TARGET}/key
    mkdir ${INSTALL_TARGET}/boot
    mount -t vfat /dev/sda1 ${INSTALL_TARGET}/boot
    # Install base, necessary utilities
    mkdir -p ${INSTALL_TARGET}/var/lib/pacman
    ${TARGET_PACMAN} -Sy
    ${TARGET_PACMAN} -Su base
    # curl could be installed later but we want it ready for rankmirrors
    ${TARGET_PACMAN} -S curl
    ${TARGET_PACMAN} -S libusb-compat gnupg
    ${TARGET_PACMAN} -R grub
    rm -rf ${INSTALL_TARGET}/boot/grub
    ${TARGET_PACMAN} -S grub2-efi-x86_64
    # Configure new system
    SetValue HOSTNAME ${HOSTNAME} ${INSTALL_TARGET}/etc/rc.conf
    sed -i "s/^\(127\.0\.0\.1.*\)$/\1 ${HOSTNAME}/" ${INSTALL_TARGET}/etc/hosts
    SetValue CONSOLEFONT Lat2-Terminus16 ${INSTALL_TARGET}/etc/rc.conf
    #following replaced due to netcfg
    #SetValue interface eth0 ${INSTALL_TARGET}/etc/rc.conf
    # write fstab
    # You can use UUID's or whatever you want here, of course. This is just
    # the simplest approach and as long as your drives aren't changing values
    # randomly it should work fine.
    cat > ${INSTALL_TARGET}/etc/fstab <<FSTAB_EOF
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    tmpfs /tmp tmpfs nodev,nosuid 0 0
    /dev/sda1 /boot vfat defaults 0 0
    /dev/mapper/cryptswap none swap defaults 0 0
    /dev/mapper/root / ext4 defaults,noatime 0 1
    FSTAB_EOF
    # write etwo
    mkdir -p /lib/initcpio/hooks/
    mkdir -p /lib/initcpio/install/
    cp /src/etwo_hooks /lib/initcpio/hooks/etwo
    cp /src/etwo_install /lib/initcpio/install/etwo
    mkdir -p ${INSTALL_TARGET}/lib/initcpio/hooks/
    mkdir -p ${INSTALL_TARGET}/lib/initcpio/install/
    cp /src/etwo_hooks ${INSTALL_TARGET}/lib/initcpio/hooks/etwo
    cp /src/etwo_install ${INSTALL_TARGET}/lib/initcpio/install/etwo
    # write crypttab
    # encrypted swap (random passphrase on boot)
    echo cryptswap /dev/sda2 SWAP "-c aes-xts-plain -h whirlpool -s 512" >> ${INSTALL_TARGET}/etc/crypttab
    # copy configs we want to carry over to target from install environment
    mv ${INSTALL_TARGET}/etc/resolv.conf ${INSTALL_TARGET}/etc/resolv.conf.orig
    cp /etc/resolv.conf ${INSTALL_TARGET}/etc/resolv.conf
    mkdir -p ${INSTALL_TARGET}/tmp
    cp /tmp/pacman.conf ${INSTALL_TARGET}/tmp/pacman.conf
    # mount proc, sys, dev in install root
    mount -t proc proc ${INSTALL_TARGET}/proc
    mount -t sysfs sys ${INSTALL_TARGET}/sys
    mount -o bind /dev ${INSTALL_TARGET}/dev
    echo -e "umount boot\n"
    # we have to remount /boot from inside the chroot
    umount ${INSTALL_TARGET}/boot
    # Create install_efi script (to be run *after* chroot /install)
    touch ${INSTALL_TARGET}/install_efi
    chmod a+x ${INSTALL_TARGET}/install_efi
    cat > ${INSTALL_TARGET}/install_efi <<EFI_EOF
    # functions (these could be a library, but why overcomplicate things
    SetValue () { VALUENAME="\$1" NEWVALUE="\$2" FILEPATH="\$3"; sed -i "s+^#\?\(\${VALUENAME}\)=.*\$+\1=\${NEWVALUE}+" "\${FILEPATH}"; }
    CommentOutValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^\(\${VALUENAME}.*\)\$/#\1/" "\${FILEPATH}"; }
    UncommentValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^#\(\${VALUENAME}.*\)\$/\1/" "\${FILEPATH}"; }
    echo -e "mount boot\n"
    # remount here or grub et al gets confused
    mount -t vfat /dev/sda1 /boot
    # mkinitcpio
    # NOTE: intel_agp drm and i915 for intel graphics
    SetValue MODULES '\\"dm_mod dm_crypt aes_x86_64 ext2 ext4 vfat intel_agp drm i915\\"' /etc/mkinitcpio.conf
    SetValue HOOKS '\\"base udev pata scsi sata usb usbinput keymap consolefont etwo encrypt filesystems\\"' /etc/mkinitcpio.conf
    SetValue BINARIES '\\"/usr/bin/gpg\\"' /etc/mkinitcpio.conf
    mkinitcpio -p linux
    # kernel modules for EFI install
    modprobe efivars
    modprobe dm-mod
    # locale-gen
    UncommentValue de_AT /etc/locale.gen
    locale-gen
    # install and configure grub2
    # did this above
    #${CHROOT_PACMAN} -Sy
    #${CHROOT_PACMAN} -R grub
    #rm -rf /boot/grub
    #${CHROOT_PACMAN} -S grub2-efi-x86_64
    # you can be surprisingly sloppy with the root value you give grub2 as a kernel option and
    # even omit the cryptdevice altogether, though it will wag a finger at you for using
    # a deprecated syntax, so we're using the correct form here
    # NOTE: take out i915.modeset=1 unless you are on intel graphics
    SetValue GRUB_CMDLINE_LINUX '\\"cryptdevice=/dev/sda3:root cryptkey=/dev/sda1:vfat:/root.gpg add_efi_memmap i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 pcie_aspm=force quiet\\"' /etc/default/grub
    # set output to graphical
    SetValue GRUB_TERMINAL_OUTPUT gfxterm /etc/default/grub
    SetValue GRUB_GFXMODE 960x600x32,auto /etc/default/grub
    SetValue GRUB_GFXPAYLOAD_LINUX keep /etc/default/grub # comment out this value if text only mode
    # install the actual grub2. Note that despite our --boot-directory option we will still need to move
    # the grub directory to /boot/grub during grub-mkconfig operations until grub2 gets patched (see below)
    grub_efi_x86_64-install --bootloader-id=grub --no-floppy --recheck
    # create our EFI boot entry
    # bug in the HP bios firmware (F.08)
    efibootmgr --create --gpt --disk /dev/sda --part 1 --write-signature --label "ARCH LINUX" --loader "\\\\grub\\\\grub.efi"
    # copy font for grub2
    cp /usr/share/grub/unicode.pf2 /boot/grub
    # generate config file
    grub-mkconfig -o /boot/grub/grub.cfg
    exit
    EFI_EOF
    # Install EFI using script inside chroot
    chroot ${INSTALL_TARGET} /install_efi
    rm ${INSTALL_TARGET}/install_efi
    # Post install steps
    # anything you want to do post install. run the script automatically or
    # manually
    touch ${INSTALL_TARGET}/post_install
    chmod a+x ${INSTALL_TARGET}/post_install
    cat > ${INSTALL_TARGET}/post_install <<POST_EOF
    set -o errexit
    set -o nounset
    # functions (these could be a library, but why overcomplicate things
    SetValue () { VALUENAME="\$1" NEWVALUE="\$2" FILEPATH="\$3"; sed -i "s+^#\?\(\${VALUENAME}\)=.*\$+\1=\${NEWVALUE}+" "\${FILEPATH}"; }
    CommentOutValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^\(\${VALUENAME}.*\)\$/#\1/" "\${FILEPATH}"; }
    UncommentValue () { VALUENAME="\$1" FILEPATH="\$2"; sed -i "s/^#\(\${VALUENAME}.*\)\$/\1/" "\${FILEPATH}"; }
    # root password
    echo -e "${HR}\\nNew root user password\\n${HR}"
    passwd
    # add user
    echo -e "${HR}\\nNew non-root user password (username:${USERNAME})\\n${HR}"
    groupadd sudo
    useradd -m -g users -G audio,lp,optical,storage,video,games,power,scanner,network,sudo,wheel -s /bin/bash ${USERNAME}
    passwd ${USERNAME}
    # mirror ranking
    echo -e "${HR}\\nRanking Mirrors (this will take a while)\\n${HR}"
    cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.orig
    mv /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.all
    sed -i "s/#S/S/" /etc/pacman.d/mirrorlist.all
    rankmirrors -n 5 /etc/pacman.d/mirrorlist.all > /etc/pacman.d/mirrorlist
    # temporary fix for locale.sh update conflict
    mv /etc/profile.d/locale.sh /etc/profile.d/locale.sh.preupdate || true
    # yaourt repo (add to target pacman, not tmp pacman.conf, for ongoing use)
    echo -e "\\n[archlinuxfr]\\nServer = http://repo.archlinux.fr/\\\$arch" >> /etc/pacman.conf
    echo -e "\\n[haskell]\\nServer = http://www.kiwilight.com/\\\$repo/\\\$arch" >> /etc/pacman.conf
    # additional groups and utilities
    pacman --noconfirm -Syu
    pacman --noconfirm -S base-devel
    pacman --noconfirm -S yaourt
    # sudo
    pacman --noconfirm -S sudo
    cp /etc/sudoers /tmp/sudoers.edit
    sed -i "s/#\s*\(%wheel\s*ALL=(ALL)\s*ALL.*$\)/\1/" /tmp/sudoers.edit
    sed -i "s/#\s*\(%sudo\s*ALL=(ALL)\s*ALL.*$\)/\1/" /tmp/sudoers.edit
    visudo -qcsf /tmp/sudoers.edit && cat /tmp/sudoers.edit > /etc/sudoers
    # power
    pacman --noconfirm -S acpi acpid acpitool cpufrequtils
    yaourt --noconfirm -S powertop2
    sed -i "/^DAEMONS/ s/)/ @acpid)/" /etc/rc.conf
    sed -i "/^MODULES/ s/)/ acpi-cpufreq cpufreq_ondemand cpufreq_powersave coretemp)/" /etc/rc.conf
    # following requires my acpi handler script
    echo "/etc/acpi/handler.sh boot" > /etc/rc.local
    # time
    pacman --noconfirm -S ntp
    sed -i "/^DAEMONS/ s/hwclock /!hwclock @ntpd /" /etc/rc.conf
    # wireless (wpa supplicant should already be installed)
    pacman --noconfirm -S iw wpa_supplicant rfkill
    pacman --noconfirm -S netcfg wpa_actiond ifplugd
    mv /etc/wpa_supplicant.conf /etc/wpa_supplicant.conf.orig
    echo -e "ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=network\nupdate_config=1" > /etc/wpa_supplicant.conf
    # make sure to copy /etc/network.d/examples/wireless-wpa-config to /etc/network.d/home and edit
    sed -i "/^DAEMONS/ s/)/ @net-auto-wireless @net-auto-wired)/" /etc/rc.conf
    sed -i "/^DAEMONS/ s/ network / /" /etc/rc.conf
    echo -e "\nWIRELESS_INTERFACE=wlan0" >> /etc/rc.conf
    echo -e "WIRED_INTERFACE=eth0" >> /etc/rc.conf
    echo "options iwlagn led_mode=2" > /etc/modprobe.d/iwlagn.conf
    # sound
    pacman --noconfirm -S alsa-utils alsa-plugins
    sed -i "/^DAEMONS/ s/)/ @alsa)/" /etc/rc.conf
    mv /etc/asound.conf /etc/asound.conf.orig || true
    #if alsamixer isn't working, try alsamixer -Dhw and speaker-test -Dhw -c 2
    # video
    pacman --noconfirm -S base-devel mesa mesa-demos
    # x
    #pacman --noconfirm -S xorg xorg-xinit xorg-utils xorg-server-utils xdotool xorg-xlsfonts
    #yaourt --noconfirm -S xf86-input-wacom-git # NOT NEEDED? input-wacom-git
    #TODO: cut down the install size
    #pacman --noconfirm -S xorg-server xorg-xinit xorg-utils xorg-server-utils
    # TODO: wacom
    # environment/wm/etc.
    #pacman --noconfirm -S xfce4 compiz ccsm
    #pacman --noconfirm -S xcompmgr
    #yaourt --noconfirm -S physlock unclutter
    #pacman --noconfirm -S rxvt-unicode urxvt-url-select hsetroot
    #pacman --noconfirm -S gtk2 #gtk3 # for taffybar?
    #pacman --noconfirm -S ghc
    # note: try installing alex and happy from cabal instead
    #pacman --noconfirm -S haskell-platform haskell-hscolour
    #yaourt --noconfirm -S xmonad-darcs xmonad-contrib-darcs xcompmgr
    #yaourt --noconfirm -S xmobar-git
    # TODO: edit xfce to use compiz
    # TODO: xmonad, but deal with video tearing
    # TODO: xmonad-darcs fails to install from AUR. haskell dependency hell.
    # switching to cabal
    # fonts
    pacman --noconfirm -S terminus-font
    yaourt --noconfirm -S webcore-fonts
    yaourt --noconfirm -S fontforge libspiro
    yaourt --noconfirm -S freetype2-git-infinality
    # TODO: sed infinality and change to OSX or OSX2 mode
    # and create the sym link from /etc/fonts/conf.avail to conf.d
    # misc apps
    #pacman --noconfirm -S htop openssh keychain bash-completion git vim
    #pacman --noconfirm -S chromium flashplugin
    #pacman --noconfirm -S scrot mypaint bc
    #yaourt --noconfirm -S task-git stellarium googlecl
    # TODO: argyll
    POST_EOF
    # Post install in chroot
    #echo "chroot and run /post_install"
    chroot /install /post_install
    rm /install/post_install
    # copy grub.efi file to the default HP EFI boot manager path
    mkdir -p ${INSTALL_TARGET}/boot/EFI/Microsoft/BOOT/
    mkdir -p ${INSTALL_TARGET}/boot/EFI/BOOT/
    cp ${INSTALL_TARGET}/boot/grub/grub.efi ${INSTALL_TARGET}/boot/EFI/Microsoft/BOOT/bootmgfw.efi
    cp ${INSTALL_TARGET}/boot/grub/grub.efi ${INSTALL_TARGET}/boot/EFI/BOOT/BOOTX64.EFI
    cp /root/root.gpg ${INSTALL_TARGET}/boot/
    # NOTES/TODO

  • Recovering earlier installed Windows 7 after installing Arch Linux

    I'm trying to boot windows on my ASUS notebook.
    There was windows 7 from the very beginning (disks C:\ and D:\), then I divided disk D:\ on several partitions and installed Arch Linux. I overwrited Windows boot information by boot part of Linux. Now I want to recover windows, that I still have on hard drive. It doesn's matter what there will be: dualboot or only windows (but dualboot is prefered).
    Disk info:
    [jhon@fckrsns ~]$ sudo fdisk -l
    Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: gpt
    Disk identifier: 1AFC9DFF-CD3B-4CE1-8CAF-41C3E5B75772
    Device Start End Size Type
    /dev/sda1 2048 411647 200M EFI System
    /dev/sda2 411648 673791 128M Microsoft reserved
    /dev/sda3 673792 586731519 279.5G Microsoft basic data
    /dev/sda4 586731520 691589119 50G Linux filesystem
    /dev/sda5 1412718592 1465147391 25G Windows recovery environment
    /dev/sda6 691589120 901304319 100G Linux filesystem
    /dev/sda7 901304320 1412718591 243.9G Microsoft basic data
    [jhon@fckrsns ~]$ lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 698.7G 0 disk
    ├─sda1 8:1 0 200M 0 part /boot
    ├─sda2 8:2 0 128M 0 part
    ├─sda3 8:3 0 279.5G 0 part
    ├─sda4 8:4 0 50G 0 part /
    ├─sda5 8:5 0 25G 0 part
    ├─sda6 8:6 0 100G 0 part /home
    └─sda7 8:7 0 243.9G 0 part
    sr0 11:0 1 1024M 0 rom
    [jhon@fckrsns ~]$ lsblk -f
    NAME FSTYPE LABEL UUID MOUNTPOINT
    sda
    ├─sda1 vfat 4DEB-D6D2 /boot
    ├─sda2
    ├─sda3 ntfs OS 62364BE9364BBCB3
    ├─sda4 ext4 c4da4683-871a-49fa-96a3-4da11387d31d /
    ├─sda5 ntfs Recovery 8ECE4F50CE4F2FAF
    ├─sda6 ext4 3eba01c6-e422-4542-8442-16064c74a563 /home
    └─sda7 ntfs 3B29E7794F6CD932
    sr0
    OS partition (/dev/sda3):
    [jhon@fckrsns /]$ ls /run/media/jhon/OS
    altera Boot djvureader DrWeb Quarantine eSupport hiberfil.sys MSOCache N56VM.BIN pagefile.sys Program Files Recovery SecurityScanner.dll VisualCLibs
    AsusVibeData bootmgr Documents and Settings eclipse Games Intel MS.Office.2007.Portable.micro.v.1.16 N56VZ.BIN PerfLogs Program Files (x86) $Recycle.Bin System Volume Information Windows
    AVScanner.ini BOOTSECT.BAK DOSBox_SIM END gcc Keil_v5 mtd NVIDIA ProgramData Qt R.G. Catalyst Users
    I tried to recover MBR with different ways:
    with syslinux:
    [jhon@fckrsns /]$ sudo dd if=/usr/lib/syslinux/bios/mbr.bin of=/dev/sda
    0+1 records in
    0+1 records out
    440 bytes (440 B) copied, 0.0226394 s, 19.4 kB/s
    with ms-sys:
    [jhon@fckrsns /]$ sudo ms-sys --partition /dev/sda1
    Start sector 2048 (nr of hidden sectors) successfully written to /dev/sda1
    Physical disk drive id 0x80 (C:) successfully written to /dev/sda1
    Number of heads (255) successfully written to /dev/sda1
    [jhon@fckrsns /]$ sudo ms-sys --mbr7 /dev/sda
    Windows 7 master boot record successfully written to /dev/sda
    But there is still no way to boot windows.
    I run grub-mkconfig before and after these manipulations with MBR:
    [jhon@fckrsns ~]$ sudo grub-mkconfig -o /boot/grub/grub.cfg
    Generating grub configuration file ...
    Found linux image: /boot/vmlinuz-linux
    Found initrd image: /boot/initramfs-linux.img
    Found fallback initramfs image: /boot/initramfs-linux-fallback.img
    No volume groups found
    done
    [jhon@fckrsns /]$ sudo os-prober
    /dev/cdrom: open failed: No medium found
    No volume groups found
    I installed rEFInd, now I have two choices on boot screen: vmlinuz-linux, which it founded, and my earlier installed grub bootloader.
    Maybe I missed something, but i don't know what exactly.
    Last edited by Jhon (2014-09-28 16:45:38)

    Now I know that I don't need MBR at all (but google told me that recovering windows = recovering MBR..)
    Are there any ways to recover boot information on EFI system partition from Linux without using Windows Live CD and it's bootrec.exe?
    I have bootmgr and bootmgfw.efi files on /dev/sda3 (partition with windows installed), what else I need? Simple copy of bootmgfw.efi to /boot/EFI/Microsoft/Boot/bootmgfw.efi and addition of custom menu item to /etc/grub.d/40_custom does'nt work. There is Windows now in rEFInd and GRUB menus, but there is error on loading.

  • How to setup grub2 with arch linux and xen, lvm on luks

    OK, so I tried downloading this package from AUR:  https://aur.archlinux.org/packages/xen-git/ , but that has patching problems as noted in the comments.  It looks like the packagebuild sets up all the xen stuff for you, but I can't seem to get the package to install because of the error's while patching.  If anyone can point me in the right direction on what all the extra files in the PKGBUILD are for or how to debug problems with PKGBUILDs not working because of patches.
    So next I just tried to compile the latest xen from git://xenbits.xen.org/xen.git (with ./configure, make, make install) and that seemed to go fine, but I'm a bit confused:
    1.  Do I have to do any additional configuration for xen when working with arch linux?  On ubuntu I could just compile the source, update grub, and make sure to start the x services at runtime.
    2.  How do I set up grub to load xen with this setup?  Right now this is my /boot/grub/grub.cfg:
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda3:vgStorage"
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    #GRUB_COLOR_NORMAL="light-blue/black"
    #GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    #GRUB_BACKGROUND="/path/to/wallpaper"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    ~
    I've tried throwing in a line like: XEN_HYPERVISOR_CMDLINE="cryptdevice=/dev/sda3:vgStorage", but nothing new shows up on the grub boot menu.
    First time trying to set up a non-ubuntu system, please help!

    As for XEN.... well you could always try QEMU/KVM or LXC.
    As for the LVM2-on-LUKS/dm-crypt
    My /etc/mkinitcpio.conf looks like this...
    MODULES="aesni_intel ata_generic ata_piix nls_cp437 ext4 intel_agp i915 dm-snapshot"
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect block keymap encrypt lvm2 filesystems keyboard fsck shutdown"
    /etc/defaults/grub
    GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda2:root:allow-discards"
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    GRUB_TERMINAL_INPUT=console
    GRUB_GFXMODE=auto
    GRUB_GFXPAYLOAD_LINUX=keep
    GRUB_DISABLE_RECOVERY=true
    The running grub config looks like this
    /boot/grub/grub.cfg
    9 insmod part_gpt
    10 insmod part_msdos
    53 if loadfont unicode ; then
    54 set gfxmode=auto
    55 load_video
    56 insmod gfxterm
    57 set locale_dir=$prefix/locale
    58 set lang=en_US
    59 insmod gettext
    60 fi
    61 terminal_input console
    62 terminal_output gfxterm
    63 set timeout=3
    84 menuentry 'Backup, Arch Linux grsec kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-grsec kernel-true-12341234-8080-8080-8080-332200882255' {
    85 load_video
    86 set gfxpayload=keep
    87 insmod gzio
    88 insmod part_msdos
    89 insmod ext2
    90 set root='hd1,msdos2'
    91 if [ x$feature_platform_search_hint = xy ]; then
    92 search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
    93 else
    94 search --no-floppy --fs-uuid --set=root BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
    95 fi
    96 echo 'Loading Linux grsec kernel ...'
    97 linux /vmlinuz-linux-grsec root=/dev/mapper/VolGroup00-lvroot rw cryptdevice=/dev/sda2:root:allow-discards quiet
    98 echo 'Loading initial ramdisk ...'
    99 initrd /initramfs-linux-grsec.img
    100 }
    Things to note:
    Numerical UUID is the UUID of the ROOT partition.
    Alphabetical UUIS is the BOOT partition
    hd1,msdos2 AND ahci1,msdos2 are how the Grub Bootloader numbers the drives not Linux.
    I have my BOOT partition on a USB stick, and it is the Second partition.
    So, that would make it, Device 2 and Partition 2
    Device numbering starts at 0
    Partition numbering starts at 1
    Oh, and note that you don't need ":allow-discards" ... at all but certainly if you don't have an SSD. Also note that I included the line numbers so it is very clear that I didn't post the whole thing, but instead what I thought was relevant. Finally, I am loading modules that I don't even need, but what the hell... if it ain't broke, don't fix it
    Last edited by hunterthomson (2013-12-04 08:31:45)

  • [VIDEO TUTORIAL] Installing Arch Linux on GPT/LVM/GRUB2

    Hello everyone,
    I've recently switched over from running my machine on LVM with a MSDOS partition style, and I was tired of the limitations of it. Such as 4 primary partions or 3 primary and 1 extended. It was also hindering my flexibility since I had to make 1 primary partition that was /boot, which forced me to make an initram image if I wanted to put my / inside of the LVM. The only way I could truly fix all my problems was to move away from GRUB-Legacy (Which I love since it's so easy to configure) over to GRUB 2(Which is not as bad as I thought it was).
    I made this video to help people trying to do this combination. I also included the links to further information in the videos' description. It contains a link to GRUB 2 Architecture and moving over to GRUB (on IBM's site), and also ArchWiki resources for further reading.
    I hope you enjoy it.
    http://www.youtube.com/watch?v=69X9ZYA41xU
    After you finish doing this, you will end up with this style:
    GPT Partition Layout w/ Protective MBR.
    /dev/sda1 - BIOS Boot Partition
    /dev/sda2 - Linux LVM (arch is name of LVM)
    --> /dev/arch/boot - ext2
    --> /dev/arch/swap - swap
    --> /dev/arch/root - ext4
    --> /dev/arch/home - ext4

    As a complete newbie to partitioning on Linux I'd like to say how grateful I am to for making this.
    You've kept it clear, clean and simple which I appreciate.
    As most of my ventures into installing Linux is usually accompanied with a graphical installer a great deal of this is fairly alien. It could be nice to have a wiki entry just laying out a few examples for partitioning and setting up arch in various simple and exotic ways.
    Again, thank you for this contribution. (While I quickly transcribe the steps in your video and ready the 'man' command)
    Edit:
    Basic step by step transcription
    [root@archiso ~]# modprobe dm-mod
    [root@archiso ~]# dhcpcd
    [root@archiso ~]# pacman -Syy gptfdisk
    [root@archiso ~]# gdisk /dev/sda
    GPT fdisk (gdisk) version 0.8.1
    Partition table scan:
    MBR: not present
    BSD: not present
    APM: not present
    GPT: not present
    Creating new GPT entries.
    Command (? for help): [n]
    Partition number (1-128, default 1): [RETURN]
    First sector (34-[max], default = 34) or {+-}size{KMGTP}: [RETURN]
    Information: Moved requested sectory from 34 to 2048 in
    order to align on 2048-sector boundries.
    Use 'l' on the experts' menu to adjust alignment
    Last sector (2048-[max], default = [max]) or{+-}size{KMGTP}: [+32MB]
    Current type is 'Linux filesystem'
    Hex code or GUID (L to show codes, Enter = 8300): [EF02]
    Changed type of partition to 'BIOS boot partition'
    Command (? for help): [n]
    Partition number (2-128, default 2): [RETURN]
    First sector (34-[max], default = 67584) or {+-}size{KMGTP}: [RETURN]
    Last sector (2048-[max], default = [max]) or {+-}size{KMGTP}: [RETURN]
    Current type is 'Linux filesystem'
    Hex code or GUID (L to show codes, Enter = 8300): [8E00]
    Changed type of partition to 'Linux LVM'
    Command (? for help): [w]
    Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!!
    Do you want to proceed? (Y/N): [y]
    OK: writing new GUID partition table (GPT).
    The operaton has completed successfully.
    [root@archiso ~]# pvcreate /dev/sda2
    [root@archiso ~]# vgcreate arch /dev/sda2
    [root@archiso ~]# vgdisplay
    [root@archiso ~]# lvcreate -L 100M -n boot arch
    [root@archiso ~]# lvcreate -C y -L 1G -n swap arch
    [root@archiso ~]# lvcreate -L 10G -n root arch
    [root@archiso ~]# lvcreate -l 100%FREE -n home arch
    [root@archiso ~]# lvscan
    [root@archiso ~]# mkfs.ext2 /dev/arch/boot
    [root@archiso ~]# mkfs.ext4 /dev/arch/root
    [root@archiso ~]# mkfs.ext4 /dev/arch/home
    [root@archiso ~]# mkswap /dev/arch/swap
    [root@archiso ~]# /arch/setup
    Prepare Hard Drive
    3 Manually Configure block devices, filesystems andmountpoints
    Partition Access Method
    dev directly by /dev/* (most intuitive but devicefile names can change
    Manage Filesystems
    /dev/sda1 raw - 32MiB N
    /dev/mapper/arch-boot raw - 100MiB N > [IGNORE]
    /dev/mapper/arch-home raw - 91000MiB N > filesystem (re)created? [NO] > ext4 home
    /dev/mapper/arch-root raw - 10240MiB N > filesystem (re)created? [NO] > ext4 root
    /dev/mapper/arch-swap raw - 1024MiB N > filesystem (re)created? [NO] > swap
    Choose bootloader
    [SKIP]
    Configuration
    mkinitcpio > HOOKS="...lvm2..."
    DONE
    Exit
    [root@archiso ~]# mount -o bind /dev /mnt/dev
    [root@archiso ~]# mount -t proc /proc /mnt/proc
    [root@archiso ~]# mount -t sysfs /sys /mnt/sys
    [root@archiso ~]# chroot /mnt /bin/bash
    [root@archiso /]# dhcpcd
    [root@archiso /]# pacman-db-upgrade
    [root@archiso /]# pacman -Syy grub2-bios
    [root@archiso /]# grub_bios-install --boot-directory=/boot --no-floppy --recheck --debug /dev/sda
    [root@archiso /]# grub-mkconfig -o /boot/grub/grub.cfg
    [root@archiso /]# exit
    [root@archiso ~]# reboot
    login
    [root@host ~]# $EDITOR /etc/default/grub
    #GRUB_GFXMODE=auto
    #GRUB_GFXPAYLOAD_LINUX=keep
    #GRUB_COLOR_NORMAL="light-blue/black"
    #GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
    [root@host ~]# chmod -x /etc/grub.d/10_linux
    [root@host ~]# $EDITOR /etc/grub.d/40_custom
    menuentry "Arch Linux" {
    insmod lvm
    set root=(arch-boot)
    linux /vmlinuz-linux root=/dev/arch/root ro
    initrd /initramfs-linux.img
    menuentry "Arch Linux Fallback" {
    insmod lvm
    set root=(arch-boot)
    linux /vmlinuz-linux root=/dev/arch/root ro
    initrd /initramfs-linux-fallback.img
    [root@host ~]# grub-mkconfig -o /boot/grub/grub.cfg
    [root@host ~]# reboot
    Last edited by Earnestly (2012-01-09 11:51:45)

  • Arch linux full raid

    I am experimenting with arch and mdadm I was using the following guide:
    http://linux-101.org/howto/arch-linux-s … tion-guide
    I get into trouble (at least I notice it at that point) with the bootloader. find /boot/grub/stage1 returns Error 15: File not found, so running the commands:
    grub> device (hd0) /dev/sda
    grub> root (hd0,0)
    grub> setup (hd0)
    naturally result in the same problem.
    Any indication what I am doing wrong? Maybe the tutorial is out of date?

    Blµb wrote:I think you're missing that 'device (hd0) /dev/sdX defines hd0 to be /dev/sdX, which is once done for sda and then for sdb.
    Yes I was/am missing that. I understand what you are saying and you have a point but I still have something daunting:
    find /grub/stage1
    (hd0,0)
    (hd1,0) <---- what's this?
    running the guide grub installs went fine but running:
    grub> device (hd1) /dev/sdb
    grub> root (hd1,0)
    grub> setup (h1)
    also works. Why?
    I only have two harddisks installed, what is (hd1) as I was under the impression that it was /dev/sdb, which now seems to be incorrect...
    Very confusing..
    Blµb wrote:I'm curious about the md= entries in this guide though. Is the goal of this to not require mdassemble to be run in an initramfs? Because mdadm usually reads from /etc/mdadm.com in the initramfs to assemble the devices.
    But what do I know, mdassemble segfaults for my intel imsm raid... so I'm still sticking to DM-raid though maybe this could help... and that doesn't help me in my case either (says "bad raid superblock magic")
    You are referring to the "md=" in grub's menu.lst? I also remember this happening in a later stage. The strange thing is that it seems to work though... If you know a better/other guide/tutorial about this subject I would like to know about it.
    Thanks allot for the information!
    Last edited by whoop (2012-02-29 20:24:30)

  • Arch Linux running on Asus Transformer T100/T100TA... sort of.

    I'm not really asking for help here (can't find an appropriate place to put this post), but more to show off my accomplishment with this tablet.
    As the thread title says, I've gotten Arch Linux to run on the Asus T100TA which is a quite annoying little thing. I haven't documented the steps myself, however, I remember exactly what I have done, and in order to get the live image to at least run on this tablet, here are the steps I did:
    (you'll maybe need 2 USB drives, seems to be the easiest way)
    1. Create an ISO using the archiso set as you normally would (except you won't really need the ISO itself) OR if you can figure it out yourself, install the base image to the USB drive (either architecture will do, but I recommend i686 since the processor is 32 bit as well)
    https://wiki.archlinux.org/index.php/Archiso
    This step will be unnecessary as of May, as the live images onwards on the main download site will already contain the 3.14 or newer kernels.
    2. After the image building successfully finishes, copy all the contents from (PROFILE)/work/iso/ (except root-image squashfs files) to a FAT32 formatted USB drive (1). This is to simply create a bootloader drive that will allow us for later swapping the USB drives.
    3. Download an ia32 version of grub. Any will do as long as it can boot up on the tablet.
    http://www.supergrubdisk.org/category/download/supergrub2diskdownload/
    This one works, download the standalone IA-32/i386 EFI and paste it in (USB Drive (1))/EFI/boot/bootia32.efi .
    (use latest versions, no matter if it's unstable)
    4. Now you need to make a grub.cfg. The one I made looks like this
    menuentry 'Arch Linux i686'{
    echo 'Loading Linux core repo kernel ...'
    linux /arch/boot/i686/vmlinuz noefi nomodeset archisobasedir=arch archisolabel=ARCH_201404
    echo 'Loading initial ramdisk ...'
    initrd /arch/boot/i686/archiso.img
    menuentry 'Arch Linux x86_64'{
    echo 'Loading Linux core repo kernel ...'
    linux /arch/boot/x86_64/vmlinuz noefi nomodeset archisobasedir=arch archisolabel=ARCH_201404
    echo 'Loading initial ramdisk ...'
    initrd /arch/boot/x86_64/archiso.img
    NOTE: If you're using a later live image build, I advise to change the date accordingly. It's not necessary to do so, since the mount by label doesn't work, however, I like to keep everything intact.
    noefi flag seems unnecessary as well, though I have added it to prevent some kernel panics from happening, for just in case. It works without it, still, however you need the nomodeset flag or else you'll get a black screen!
    I'm not entirely sure where the grub.cfg goes, but I've put it in USB Drive(1)/boot/grub/ , /EFI/grub/ and in /EFI/boot/grub/ just to make it sure that it works.
    5. Create an ext2/3/4 (recommended ext2 for flash drives, not to wear it out) USB drive (2) and copy the arch folder to the root of the USB drive (2)
    ---- BOOT PROCESS ----
    Before this step, ensure that Secure Boot is set to OFF in the Aptio setup. Otherwise it will throw up an error in a red box crying it's not signed.
    6. Plug in the USB drive (1) into a USB port and while powering on the tablet, tilt the escape key to pop up a boot menu.
    7. Select UEFI: (your USB drive (1))
    8. GRUB 2 will pop up. If you're running the SuperGrubDisk version, you're gonna have to go to Everything and then scroll down until it says something like
    (hd0, msdos1)/boot/grub/grub.cfg
    and click on it to open the configuration data manually created.
    9. Simply select your desired version of Arch Linux live distro to boot.
    10. VOILAaa, not really... It'll pop up with a mount error saying it's a wrong FS to mount. This is where you plug in your USB drive (2) in place of the first one.
    11. Type in:
    # mount /dev/sda1 /run/archiso/bootmnt
    # exit
    12. Congratulations, you're running Arch Linux on your ASUS Transformer T100TA tablet!
    This is as far as I have went into running it. Installing it on a HDD would require mounting the mmcblk partitions, which I haven't looked into yet. For a start, I'd just recommend installing it on a USB drive, though you'd have to own one of the USB OTG converters or a USB hub. The screen is spammed with the mmcblk0rpmb timeout errors though and that is annoying. It stops after a while when it stops trying. Reboot doesn't work either, seems like acpi is broken.
    You could do it with a single usb drive, though it requires some knowledge of this tablet's EFI because it disallowed me from running a kernel on another partition other than FAT32. Grub pops up with an error:
    can't unload EFI services
    or something like that.
    I've also tried putting the USB Drive (2) in during grub and it pops up with an error with invalid sector sizes. That was to be expected.
    btw I know it's my first post, I'm just here to share this with you. I never had the need to ask for help but when absolutely necessary.
    PICS OF IT RUNNING
    Some USB devices aren't visible, like the camera.
    A custom partition layout without the recovery partitions. Yours may differ.
    Last edited by xan1242 (2014-04-13 22:54:46)

    I haven't tried much other than getting this live image to run on this machine. I'll attempt to install the base image using my desktop computer with the appropriate drivers and see how that goes. (or just install the wifi driver)
    That guy really made it to work much better than I imagined it to work at all! I'll see what can be done using the same drivers, though running Ubuntu seems tempting as well. He even got the touchscreen to work, which is really awesome. It seems that he also merged the drivers into the kernel image, which is going to be a challenge in Arch.
    Since he's using the 64 bit build of Ubuntu, I'll try it with x86_64 Arch as well to try and use his guide to make the drivers to work.
    EDIT: I have successully installed the base to an external drive and booted it on the tablet, however since the base was installed externally on another machine, I need to regenerate initrd. It boots on the fallback ramdisk, but still no wifi and the screen is spammed even more with the timeout errors. I've seen topics on Raspberry Pi having a similar issue and that it was repaired using some kernel flags, but I am not sure if those will work with the tablet. Also, using the bootflags jfwells used on Ubuntu work here as well, and gives full resolution output now. Wifi doesn't work. ip link doesn't give any signs of a wifi card present.
    EDIT2: Got Arch up and running relatively nicely on the tablet now. Though it is in the same state as the last edit in terms of functionality, it works I'd say well enough to be considered usable. I couldn't make the wireless card to work, for some strange reason, so I got a RT73 USB card (Edimax EW-7318USg to be precise, had to use 2 USB ports) and installed stuff on to the tablet. I ran X without a desktop manager, and the X apps worked fine, even with the touch screen (emulating a mouse, no right click) and I ran XFCE4 on it without a problem (with compositing).
    It simply needs more developed drivers on it, that's mostly it. The state is exactly the same as Ubuntu 14.04 that jfwells made to work (minus the wifi). I haven't played with the sound, either, due to the warning he posted, but I believe it works as it does in Ubuntu.
    The steps I made are as follows:
    1. Simply made another live ISO with the archiso set
    2. dd'd the image to a USB drive
    3. On the second USB drive I created two GPT partitions (200 - 300 MB for ESP, everything else ext2)
    4. Booted the live archiso USB drive
    5. Installed the base to the second USB drive while being mounted like this: ext2 partition -> /mnt and ESP -> /mnt/boot
    6. Installed GRUB x86_64-efi to simply generate a configuration
    7. Installed wireless utilities as well as everything else needed to make it to work
    8. To ensure bootability on the tablet, again, I put the IA32 GRUB to the ESP in /EFI/boot/bootia32.efi
    9. I have edited the grub.cfg, can't exactly remember with what, but this is what it looks like
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-(hd0,gpt2)' {
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,gpt1'
    echo 'Loading Linux core repo kernel ...'
    linux /vmlinuz-linux root=/dev/sda2 video=VGA-1:1368x768e reboot=pci,force sdhci.debug_quirks=0x8000 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /initramfs-linux.img
    menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-(hd0,gpt2)' {
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,gpt1'
    echo 'Loading Linux core repo kernel ...'
    linux /vmlinuz-linux root=/dev/sda2 video=VGA-1:1368x768e reboot=pci,force sdhci.debug_quirks=0x8000 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    I simply added the kernel flags jfwells added. It needs that root flag, or else it will not boot. I can't figure out the UUIDs though. It will reboot, but it will not shut down.
    10. Boot up your second USB drive on the tablet and... IMPORTANT - Boot with the fallback ramdisk - or else you're going to experience non functional input
    11. After booting it, you'll get the annoying mmcblk timeout spamming the screen. I haven't figured out how to fix it, but to hide it, type in
    # dmesg -n 1
    12. Generate another ramdisk (forgot the command, but search function should serve you)
    13. Reboot with the normal ramdisk now.
    14. After setting up the wireless connection, rock on with the pacman!
    At this point I installed a bunch of stuff, like Intel GPU drivers, xorg, xfce4, ntfs-3g, gparted,  and among other stuff I personally test stuff with.
    I couldn't mount the mmcblk partitions to at least somehow be able to edit data on the Windows partitions or the disk as a whole.
    Anybody willing to help getting Arch to run on this tablet is welcome.
    EDIT3: Internal WiFi working! Simply added "sdhci.debug_quirks=0x8000" flag.
    Last edited by xan1242 (2014-04-13 23:35:26)

  • Arch Linux and Splashy, a big update

    edit 2:
    If you don't want to build from sources have a look at this post: http://bbs.archlinux.org/viewtopic.php? … 03#p371403
    edit:
    UPDATED LINK:
    http://slexiw.netsons.org/files/splashy-stuff7.tar.gz
    About me:
    I'm a professional developer (mainly c/c++) with 10 years of development experience. I've never programmed in bash before so this is my first experience. My Linux knowledge isn't good either but i learned a lot thanks to Arch Linux.
    About the thread:
    I need a boot splash for a mini-pc I'm building and i want, of course, use Arch Linux. The current status is pretty depressive, initscripts-splash are outdated and there is no real support for user-mode boot splashing system (like splashy).
    A few suggestions (IMHO) for the Arch Linux developers:
    -Integrate the splash system in the official initscripts. If you write a wrapper like start_daemon and stop_daemon to be used in /etc/rc.multi and /etc/rc.shutdown, we can limit the changes to just /etc/rc.d/functions and at least the initscripts-splash will be more maintainable and the whole code more clean.
    -Patch killall5 to add the support to ignore pids. The patch is really small and the one used by Ubuntu is http://patches.ubuntu.com/s/sysvinit/ex … ids.dpatch. There is a package in AUR that uses a different patch: http://aur.archlinux.org/packages.php?ID=16445. I tested it and so far it worked fine, no problems to be reported.
    Why do we need a patched killall5? Splashy gets killed early during the shutdown process and the whole purpose of having a splash system is defeated. Currently Splashy cannot handle the reboot/shutdown.
    Enough talking, now back to the real stuff. I've modified the initscript-splash package (completely rewritten) and the splashy package (almost completely rewritten).
    I've also written a new package to support splashy themes. I'm using these packages for my system and i never had any problem so far.
    initscripts-splash:
    Rewritten to fit my needs for Splashy. Based on initscripts-2008.05-1 (in testing, if you are not using the testing repo you should better wait till the package hits core).
    It only supports MY Splashy package, no other splash system is supported, not even the "old" Splashy package from AUR.
    splashy:
    Based on the great work done by the maintainers and the contributors of the package in AUR. A lot has been rewritten and it's actually a lot different.
    splashy-themes:
    Simple package with just 1 theme (for now), depends on archlinux-wallpaper and uses a little hack to use the wallpapers provided. I will provide new themes as soon as i have time.
    Splashy now supports:
    Progress bar
    Text output
    Shutdown/Reboot
    Still working on resume/suspend and "verbose on error".
    Installation tutorial:
    -Download, compile and install sysvinit-mod from aur: http://aur.archlinux.org/packages.php?ID=16445
    -Remove your old initscripts or initscripts-splash package, remember to back /etc/rc.conf and /etc/inittab before.
    -Download, build and install initscripts-splash from http://slexiw.netsons.org/files/initscr … ash.tar.gz
    -Download, build and install splashy from http://slexiw.netsons.org/files/splashy.tar.gz
    -Download, build and install splashy-themes from http://slexiw.netsons.org/files/splashy-themes.tar.gz
    -You may want to restore your old /etc/rc.conf and /etc/inittab now.
    -Add SPLASH="splashy" to the end of /etc/rc.conf.
    -Edit /etc/splashy/config.xml to select the theme you want (to list the installed themes do "ls /usr/share/splashy/themes/", use the directory name as the theme name).
    -Add the "splashy" hook to /etc/mkinitcpio.conf (mine is after v86d and before autodetect)
    -Rebuild your initramfs: mkinitcpio -g /boot/kernel26.img
    -Add "splash" to the kernel command line, if you are not using uvesafb (v86d hook) add vga=791 too. You should also add "quiet".
    If you are still confused follow this guide: http://wiki.archlinux.org/index.php/Splashy
    Looking for suggestions, bug reports and patches!
    Thank you for reading this, you've done what i couldn't do, i can't believe i wrote all that cr*p.
    Last edited by lexiw (2008-05-29 15:28:49)

    phrakture wrote:
    lexiw wrote:-Integrate the splash system in the official initscripts. If you write a wrapper like start_daemon and stop_daemon to be used in /etc/rc.multi and /etc/rc.shutdown, we can limit the changes to just /etc/rc.d/functions and at least the initscripts-splash will be more maintainable and the whole code more clean.
    Now, we've gone through this a couple of times, and I don't actually want to integrate splash SPECIFIC stuff in the initscripts.
    However, we have the ability to override functions used by the initscripts. All we need to do is extrapolate out the pieces that you would need so that you can override them.
    So, if you would be willing to provide a patch against git (http://projects.archlinux.org/?p=initsc … ;a=summary) which extrapolates the pieces you need, we could get that applied, and you simply need to dump your overriding functions in /etc/rc.d/functions.d/. NOTE: submit the patch to the bug tracker, it will get lost if you just post it on the forums.
    Alternatively, you can just tell us (http://bugs.archlinux.org/) which pieces you want extrapolated, but this will take much longer, as I don't think anyone dealing with this stuff is really gung-ho about splash support.
    I will probably provide a patch after i studied the code a little deeper The /etc/rc.d/functions.d/ solution seems the right way to implement it.
    phrakture wrote:
    lexiw wrote:-Patch killall5 to add the support to ignore pids. The patch is really small and the one used by Ubuntu is http://patches.ubuntu.com/s/sysvinit/ex … ids.dpatch. There is a package in AUR that uses a different patch: http://aur.archlinux.org/packages.php?ID=16445. I tested it and so far it worked fine, no problems to be reported.
    Why do we need a patched killall5? Splashy gets killed early during the shutdown process and the whole purpose of having a splash system is defeated. Currently Splashy cannot handle the reboot/shutdown.
    This seems a little silly to me. I'm sure there's 10 or 20 other ways you could implement the same functionality without needing to patch a quasi-critical binary just for splash support. The patch affects all users. Splashy does not.
    I could not find an alternative solution by myself, as i stated my Linux knowledge isn't more than average. If you could provide me some hints I'll be happy to do some further research on the issue and provide a patch. I'll be glad to drop the sysvinit-mod dependency.
    Without the right know-how i just went the "mainstream way" and did what Debian/Ubuntu did.
    Edit:
    I didn't know you could ovveride functions, this will be a great boost for the initscripts-splash project Thank you!
    Last edited by lexiw (2008-05-22 17:35:15)

  • Arch Linux doesn't detect RAID of SAS hard drives

    Hello everyone:
    I'm trying to install Arch Linux 2009.08 x86_64 on a server IBM xSeries 206m, which has hard drives connected to a SAS controller card Adaptec AIC-9405.
    I put the disks in RAID 0 and starting the server, I can see on the menu of the RAID controller card that is fine, but when I'm going to make the partitions, I do not see any hard drive.
    Checking with the command dmesg, I found some messages that seem to indicate the failure:
    aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
    aic94xx 0000:03:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    aic94xx: found Adaptec AIC-9405W SAS/SATA Host Adapter, device 0000:03:04.0
    scsi2 : aic94xx
    aic94xx 0000:03:04.0: firmware: requesting aic94xx-seq.fw
    usb 2-1: configuration #1 chosen from 1 choice
    aic94xx: Failed to load sequencer firmware file aic94xx-seq.fw, error -2
    aic94xx: couldn't init seqs for 0000:03:04.0
    aic94xx: couldn't init the chip
    aic94xx 0000:03:04.0: PCI INT A disabled
    aic94xx: probe of 0000:03:04.0 failed with error -2
    Someone else with the same problem ... anyone know how to fix it ?

    GerBra wrote:
    The error message of missing firmware file in dmesg/messages.log is gone away now?
    Could you place dmesg.log or messages.log somewhere to view them? (Copy these files over network to an
    other machine and load it up to some pastebin service, or attach it here).
    You don't see the raid array when doing a: fdisk -l ?
    Also a: cat /proc/scsi/scsi should also show the array if up and running.
    SCSI modul aic94xx should also have a dir entry in /proc/scsi. Example: my Adaptec 2940 has detailled infos about the controller and device status in:
    cat /proc/scsi/aic7xxx/2
    If you have such a file (the number could differ on your machine) please post it also.
    Maybe it's the best if you open a bugreport in http://bugs.archlinux.org/index/proj6 ....
    Hi GerBra:
    This is the dmesg.log:
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
    Command line: lang=en locale=en_US.UTF-8 archisolabel=ARCHISO_KE1AECIE ramdisk_size=75%
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
    BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
    BIOS-e820: 00000000bfee0000 - 00000000bfee9000 (ACPI data)
    BIOS-e820: 00000000bfee9000 - 00000000bff00000 (ACPI NVS)
    BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    DMI present.
    last_pfn = 0x140000 max_arch_pfn = 0x100000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-C7FFF write-protect
    C8000-DFFFF uncachable
    E0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 0C0000000 mask FC0000000 uncachable
    1 base 000000000 mask F00000000 write-back
    2 base 100000000 mask FC0000000 write-back
    3 base 0BFF00000 mask FFFF00000 uncachable
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbfee0 max_arch_pfn = 0x100000000
    e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009b800 (usable)
    modified: 000000000009b800 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bfee0000 (usable)
    modified: 00000000bfee0000 - 00000000bfee9000 (ACPI data)
    modified: 00000000bfee9000 - 00000000bff00000 (ACPI NVS)
    modified: 00000000bff00000 - 00000000c0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000140000000 (usable)
    init_memory_mapping: 0000000000000000-00000000bfee0000
    0000000000 - 00bfe00000 page 2M
    00bfe00000 - 00bfee0000 page 4k
    kernel direct mapping tables up to bfee0000 @ 8000-d000
    init_memory_mapping: 0000000100000000-0000000140000000
    0100000000 - 0140000000 page 2M
    kernel direct mapping tables up to 140000000 @ b000-11000
    RAMDISK: 378e2000 - 37fef5c0
    ACPI: RSDP 00000000000f64f0 00014 (v00 PTLTD )
    ACPI: RSDT 00000000bfee3615 0003C (v01 PTLTD RSDT 06040000 LTP 00000000)
    ACPI: FACP 00000000bfee8e70 00074 (v01 INTEL 06040000 PTL 00000003)
    ACPI: DSDT 00000000bfee384c 05624 (v01 INTEL GLENWOOD 06040000 MSFT 0100000E)
    ACPI: FACS 00000000bfee9fc0 00040
    ACPI: SPCR 00000000bfee8ee4 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
    ACPI: MCFG 00000000bfee8f34 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    ACPI: APIC 00000000bfee8f70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
    ACPI: BOOT 00000000bfee8fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SSDT 00000000bfee3651 001FB (v01 PmRef CpuPm 00003000 INTL 20030224)
    ACPI: Local APIC address 0xfee00000
    (8 early reservations) ==> bootmem [0000000000 - 0140000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
    #3 [00378e2000 - 0037fef5c0] RAMDISK ==> [00378e2000 - 0037fef5c0]
    #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000]
    #5 [000082e000 - 000082e198] BRK ==> [000082e000 - 000082e198]
    #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
    #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
    found SMP MP-table at [ffff8800000f6520] f6520
    [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00140000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009b
    0: 0x00000100 -> 0x000bfee0
    0: 0x00100000 -> 0x00140000
    On node 0 totalpages: 1048182
    DMA zone: 56 pages used for memmap
    DMA zone: 1688 pages reserved
    DMA zone: 2246 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 767768 pages, LIFO batch:31
    Normal zone: 3584 pages used for memmap
    Normal zone: 258560 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee9000
    PM: Registered nosave memory: 00000000bfee9000 - 00000000bff00000
    PM: Registered nosave memory: 00000000bff00000 - 00000000c0000000
    PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 25 pages at ffff880028022000, static data 72352 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028574
    Kernel command line: lang=en locale=en_US.UTF-8 archisolabel=ARCHISO_KE1AECIE ramdisk_size=75%
    Initializing CPU#0
    NR_IRQS:768
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Fast TSC calibration using PIT
    Detected 2999.990 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    software IO TLB at phys 0x20000000 - 0x24000000
    Memory: 4034028k/5242880k available (3409k kernel code, 1050152k absent, 157764k reserved, 1239k data, 464k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.97 BogoMIPS (lpj=9999966)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    ACPI: Core revision 20090320
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 6002.80 BogoMIPS (lpj=9999695)
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU1: Thermal monitoring enabled (TM1)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (12004.78 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level SIBLING
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level SIBLING
    groups: 1 0
    net_namespace: 1888 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
    PCI: Not using MMCONFIG.
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
    PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    PCI: Using MMCONFIG at e0000000 - e09fffff
    ACPI: No dock devices found.
    ACPI Warning (nspredef-0331): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 [20090320]
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.5: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x3000-0x301f]
    pci 0000:00:1d.1: reg 20 io port: [0x3020-0x303f]
    pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
    pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 20 io port: [0x3080-0x308f]
    pci 0000:00:1f.3: reg 20 io port: [0x3060-0x307f]
    pci 0000:00:01.0: bridge io port: [0x00-0xfff]
    pci 0000:00:01.0: bridge 32bit mmio: [0x000000-0x0fffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
    pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled
    pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:02:00.1: reg 10 32bit mmio: [0xc0100000-0xc0100fff]
    pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
    pci 0000:00:1c.0: bridge 32bit mmio: [0xc0100000-0xc02fffff]
    pci 0000:00:1c.0: bridge 64bit mmio pref: [0xc0500000-0xc05fffff]
    pci 0000:03:04.0: reg 10 64bit mmio: [0xc0280000-0xc02bffff]
    pci 0000:03:04.0: reg 18 64bit mmio: [0xc0500000-0xc051ffff]
    pci 0000:03:04.0: reg 20 io port: [0x4000-0x40ff]
    pci 0000:03:04.0: reg 30 32bit mmio: [0x000000-0x07ffff]
    pci 0000:02:00.0: bridge io port: [0x4000-0x4fff]
    pci 0000:02:00.0: bridge 32bit mmio: [0xc0200000-0xc02fffff]
    pci 0000:02:00.0: bridge 64bit mmio pref: [0xc0500000-0xc05fffff]
    pci 0000:04:00.0: reg 10 64bit mmio: [0xc0300000-0xc030ffff]
    pci 0000:04:00.0: PME# supported from D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:00:1c.4: bridge 32bit mmio: [0xc0300000-0xc03fffff]
    pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
    pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
    pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
    pci 0000:0a:04.0: reg 10 32bit mmio: [0xc8000000-0xcfffffff]
    pci 0000:0a:04.0: reg 14 io port: [0x5000-0x50ff]
    pci 0000:0a:04.0: reg 18 32bit mmio: [0xc0400000-0xc040ffff]
    pci 0000:0a:04.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:0a:04.0: supports D1 D2
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0x5000-0x5fff]
    pci 0000:00:1e.0: bridge 32bit mmio: [0xc0400000-0xc04fffff]
    pci 0000:00:1e.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1.PXHV._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *5
    PCI: Using ACPI for IRQ routing
    pci 0000:00:01.0: BAR 13: can't allocate resource
    pci 0000:00:01.0: BAR 14: can't allocate resource
    pci 0000:00:01.0: BAR 15: can't allocate resource
    pci 0000:00:1c.5: BAR 13: can't allocate resource
    pci 0000:00:1c.5: BAR 14: can't allocate resource
    pci 0000:00:1c.5: BAR 15: can't allocate resource
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 12 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: ioport range 0x800-0x83f has been reserved
    system 00:01: ioport range 0x1000-0x107f has been reserved
    system 00:01: ioport range 0x1180-0x11bf has been reserved
    system 00:01: ioport range 0x4d0-0x4d1 has been reserved
    system 00:01: ioport range 0x500-0x57f has been reserved
    system 00:01: ioport range 0xca8-0xca8 has been reserved
    system 00:01: ioport range 0xcac-0xcac has been reserved
    system 00:01: ioport range 0xfe00-0xfe00 has been reserved
    system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
    system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: disabled
    pci 0000:00:01.0: MEM window: disabled
    pci 0000:00:01.0: PREFETCH window: disabled
    pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
    pci 0000:02:00.0: IO window: 0x4000-0x4fff
    pci 0000:02:00.0: MEM window: 0xc0200000-0xc02fffff
    pci 0000:02:00.0: PREFETCH window: 0x000000c0500000-0x000000c05fffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: 0x4000-0x4fff
    pci 0000:00:1c.0: MEM window: 0xc0100000-0xc02fffff
    pci 0000:00:1c.0: PREFETCH window: 0x000000c0500000-0x000000c05fffff
    pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
    pci 0000:00:1c.4: IO window: disabled
    pci 0000:00:1c.4: MEM window: 0xc0300000-0xc03fffff
    pci 0000:00:1c.4: PREFETCH window: disabled
    pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05
    pci 0000:00:1c.5: IO window: disabled
    pci 0000:00:1c.5: MEM window: disabled
    pci 0000:00:1c.5: PREFETCH window: disabled
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
    pci 0000:00:1e.0: IO window: 0x5000-0x5fff
    pci 0000:00:1e.0: MEM window: 0xc0400000-0xc04fffff
    pci 0000:00:1e.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:02:00.0: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.5: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 mem: [0x0-0xfff]
    pci_bus 0000:01: resource 1 mem: [0x0-0xfffff]
    pci_bus 0000:01: resource 2 mem: [0x0-0xfffff]
    pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:02: resource 1 mem: [0xc0100000-0xc02fffff]
    pci_bus 0000:02: resource 2 pref mem [0xc0500000-0xc05fffff]
    pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:03: resource 1 mem: [0xc0200000-0xc02fffff]
    pci_bus 0000:03: resource 2 pref mem [0xc0500000-0xc05fffff]
    pci_bus 0000:04: resource 1 mem: [0xc0300000-0xc03fffff]
    pci_bus 0000:05: resource 0 mem: [0x0-0xfff]
    pci_bus 0000:05: resource 1 mem: [0x0-0xfffff]
    pci_bus 0000:05: resource 2 mem: [0x0-0xfffff]
    pci_bus 0000:0a: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:0a: resource 1 mem: [0xc0400000-0xc04fffff]
    pci_bus 0000:0a: resource 2 pref mem [0xc8000000-0xcfffffff]
    pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
    pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 7221k freed
    Simple Boot Flag at 0x3c set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1250095030.473:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7894
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    PCI quirk: reroute interrupts for 0x8086:0x032c
    pci 0000:0a:04.0: Boot video device
    pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:1c.4: setting latency timer to 64
    pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:1c.5: setting latency timer to 64
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 464k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc0000000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
    aic94xx 0000:03:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
    aic94xx: found Adaptec AIC-9405W SAS/SATA Host Adapter, device 0000:03:04.0
    scsi2 : aic94xx
    aic94xx 0000:03:04.0: firmware: requesting aic94xx-seq.fw
    aic94xx: Failed to load sequencer firmware file aic94xx-seq.fw, error -2
    aic94xx: couldn't init seqs for 0000:03:04.0
    aic94xx: couldn't init the chip
    aic94xx 0000:03:04.0: PCI INT A disabled
    aic94xx: probe of 0000:03:04.0 failed with error -2
    ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
    ata1.00: limited to UDMA/33 due to 40-wire cable
    ata1.00: configured for UDMA/33
    scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
    ata2: port disabled. ignoring.
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    usb 2-1: new low speed USB device using uhci_hcd and address 2
    usb 2-1: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
    generic-usb 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1/input0
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    ISO 9660 Extensions: RRIP_1991A
    squashfs: version 4.0 (2009/01/31) Phillip Lougher
    aufs 2-standalone.tree-20090601
    loop: module loaded
    aufs test_add:240:mount[635]: uid/gid/perm /tmpfs/mnt/loop0 0/0/0755, 0/0/01777
    aufs test_add:240:mount[648]: uid/gid/perm /tmpfs/mnt/loop2 0/0/0755, 0/0/01777
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 141
    input: PC Speaker as /devices/platform/pcspkr/input/input3
    intel_rng: FWH not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    ACPI: Power Button [PWRF]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input5
    ACPI: Power Button [PWRB]
    EDAC MC: Ver: 2.1.0 Jul 31 2009
    iTCO_vendor_support: vendor-support=0
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    tg3.c:v3.98 (February 25, 2009)
    tg3 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    tg3 0000:04:00.0: setting latency timer to 64
    tg3 0000:04:00.0: PME# disabled
    eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:11:25:a4:42:2f
    eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
    eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    processor ACPI_CPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0
    EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
    lp: driver loaded but no devices found
    parport_pc 00:0b: reported by Plug and Play ACPI
    parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    This is the messages.log:
    Aug 12 16:37:33 archiso kernel: Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
    Aug 12 16:37:33 archiso kernel: Command line: lang=en locale=en_US.UTF-8 archisolabel=ARCHISO_KE1AECIE ramdisk_size=75%
    Aug 12 16:37:33 archiso kernel: KERNEL supported cpus:
    Aug 12 16:37:33 archiso kernel: Intel GenuineIntel
    Aug 12 16:37:33 archiso kernel: AMD AuthenticAMD
    Aug 12 16:37:33 archiso kernel: Centaur CentaurHauls
    Aug 12 16:37:33 archiso kernel: BIOS-provided physical RAM map:
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 00000000bfee0000 - 00000000bfee9000 (ACPI data)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 00000000bfee9000 - 00000000bff00000 (ACPI NVS)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    Aug 12 16:37:33 archiso kernel: BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Aug 12 16:37:33 archiso kernel: DMI present.
    Aug 12 16:37:33 archiso kernel: last_pfn = 0x140000 max_arch_pfn = 0x100000000
    Aug 12 16:37:33 archiso kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Aug 12 16:37:33 archiso kernel: last_pfn = 0xbfee0 max_arch_pfn = 0x100000000
    Aug 12 16:37:33 archiso kernel: Scanning 1 areas for low memory corruption
    Aug 12 16:37:33 archiso kernel: modified physical RAM map:
    Aug 12 16:37:33 archiso kernel: modified: 0000000000000000 - 0000000000001000 (usable)
    Aug 12 16:37:33 archiso kernel: modified: 0000000000001000 - 0000000000006000 (reserved)
    Aug 12 16:37:33 archiso kernel: modified: 0000000000006000 - 000000000009b800 (usable)
    Aug 12 16:37:33 archiso kernel: modified: 000000000009b800 - 00000000000a0000 (reserved)
    Aug 12 16:37:33 archiso kernel: modified: 00000000000e0000 - 0000000000100000 (reserved)
    Aug 12 16:37:33 archiso kernel: modified: 0000000000100000 - 00000000bfee0000 (usable)
    Aug 12 16:37:33 archiso kernel: modified: 00000000bfee0000 - 00000000bfee9000 (ACPI data)
    Aug 12 16:37:33 archiso kernel: modified: 00000000bfee9000 - 00000000bff00000 (ACPI NVS)
    Aug 12 16:37:33 archiso kernel: modified: 00000000bff00000 - 00000000c0000000 (reserved)
    Aug 12 16:37:33 archiso kernel: modified: 00000000fec00000 - 00000000fec10000 (reserved)
    Aug 12 16:37:33 archiso kernel: modified: 00000000fee00000 - 00000000fee01000 (reserved)
    Aug 12 16:37:33 archiso kernel: modified: 00000000ff000000 - 0000000100000000 (reserved)
    Aug 12 16:37:33 archiso kernel: modified: 0000000100000000 - 0000000140000000 (usable)
    Aug 12 16:37:33 archiso kernel: init_memory_mapping: 0000000000000000-00000000bfee0000
    Aug 12 16:37:33 archiso kernel: init_memory_mapping: 0000000100000000-0000000140000000
    Aug 12 16:37:33 archiso kernel: RAMDISK: 378e2000 - 37fef5c0
    Aug 12 16:37:33 archiso kernel: ACPI: RSDP 00000000000f64f0 00014 (v00 PTLTD )
    Aug 12 16:37:33 archiso kernel: ACPI: RSDT 00000000bfee3615 0003C (v01 PTLTD RSDT 06040000 LTP 00000000)
    Aug 12 16:37:33 archiso kernel: ACPI: FACP 00000000bfee8e70 00074 (v01 INTEL 06040000 PTL 00000003)
    Aug 12 16:37:33 archiso kernel: ACPI: DSDT 00000000bfee384c 05624 (v01 INTEL GLENWOOD 06040000 MSFT 0100000E)
    Aug 12 16:37:33 archiso kernel: ACPI: FACS 00000000bfee9fc0 00040
    Aug 12 16:37:33 archiso kernel: ACPI: SPCR 00000000bfee8ee4 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
    Aug 12 16:37:33 archiso kernel: ACPI: MCFG 00000000bfee8f34 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    Aug 12 16:37:33 archiso kernel: ACPI: APIC 00000000bfee8f70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
    Aug 12 16:37:33 archiso kernel: ACPI: BOOT 00000000bfee8fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    Aug 12 16:37:33 archiso kernel: ACPI: SSDT 00000000bfee3651 001FB (v01 PmRef CpuPm 00003000 INTL 20030224)
    Aug 12 16:37:33 archiso kernel: (8 early reservations) ==> bootmem [0000000000 - 0140000000]
    Aug 12 16:37:33 archiso kernel: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    Aug 12 16:37:33 archiso kernel: #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    Aug 12 16:37:33 archiso kernel: #2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
    Aug 12 16:37:33 archiso kernel: #3 [00378e2000 - 0037fef5c0] RAMDISK ==> [00378e2000 - 0037fef5c0]
    Aug 12 16:37:33 archiso kernel: #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000]
    Aug 12 16:37:33 archiso kernel: #5 [000082e000 - 000082e198] BRK ==> [000082e000 - 000082e198]
    Aug 12 16:37:33 archiso kernel: #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
    Aug 12 16:37:33 archiso kernel: #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
    Aug 12 16:37:33 archiso kernel: found SMP MP-table at [ffff8800000f6520] f6520
    Aug 12 16:37:33 archiso kernel: Zone PFN ranges:
    Aug 12 16:37:33 archiso kernel: DMA 0x00000000 -> 0x00001000
    Aug 12 16:37:33 archiso kernel: DMA32 0x00001000 -> 0x00100000
    Aug 12 16:37:33 archiso kernel: Normal 0x00100000 -> 0x00140000
    Aug 12 16:37:33 archiso kernel: Movable zone start PFN for each node
    Aug 12 16:37:33 archiso kernel: early_node_map[4] active PFN ranges
    Aug 12 16:37:33 archiso kernel: 0: 0x00000000 -> 0x00000001
    Aug 12 16:37:33 archiso kernel: 0: 0x00000006 -> 0x0000009b
    Aug 12 16:37:33 archiso kernel: 0: 0x00000100 -> 0x000bfee0
    Aug 12 16:37:33 archiso kernel: 0: 0x00100000 -> 0x00140000
    Aug 12 16:37:33 archiso kernel: ACPI: PM-Timer IO Port: 0x1008
    Aug 12 16:37:33 archiso kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Aug 12 16:37:33 archiso kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Aug 12 16:37:33 archiso kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Aug 12 16:37:33 archiso kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Aug 12 16:37:33 archiso kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Aug 12 16:37:33 archiso kernel: IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
    Aug 12 16:37:33 archiso kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    Aug 12 16:37:33 archiso kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Aug 12 16:37:33 archiso kernel: Using ACPI (MADT) for SMP configuration information
    Aug 12 16:37:33 archiso kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee9000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000bfee9000 - 00000000bff00000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000bff00000 - 00000000c0000000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    Aug 12 16:37:33 archiso kernel: PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    Aug 12 16:37:33 archiso kernel: Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
    Aug 12 16:37:33 archiso kernel: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
    Aug 12 16:37:33 archiso kernel: PERCPU: Embedded 25 pages at ffff880028022000, static data 72352 bytes
    Aug 12 16:37:33 archiso kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028574
    Aug 12 16:37:33 archiso kernel: Kernel command line: lang=en locale=en_US.UTF-8 archisolabel=ARCHISO_KE1AECIE ramdisk_size=75%
    Aug 12 16:37:33 archiso kernel: Initializing CPU#0
    Aug 12 16:37:33 archiso kernel: NR_IRQS:768
    Aug 12 16:37:33 archiso kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
    Aug 12 16:37:33 archiso kernel: Fast TSC calibration using PIT
    Aug 12 16:37:33 archiso kernel: Detected 2999.990 MHz processor.
    Aug 12 16:37:33 archiso kernel: Console: colour VGA+ 80x25
    Aug 12 16:37:33 archiso kernel: console [tty0] enabled
    Aug 12 16:37:33 archiso kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Aug 12 16:37:33 archiso kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Aug 12 16:37:33 archiso kernel: Checking aperture...
    Aug 12 16:37:33 archiso kernel: No AGP bridge found
    Aug 12 16:37:33 archiso kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Aug 12 16:37:33 archiso kernel: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    Aug 12 16:37:33 archiso kernel: software IO TLB at phys 0x20000000 - 0x24000000
    Aug 12 16:37:33 archiso kernel: Memory: 4034028k/5242880k available (3409k kernel code, 1050152k absent, 157764k reserved, 1239k data, 464k init)
    Aug 12 16:37:33 archiso kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Aug 12 16:37:33 archiso kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.97 BogoMIPS (lpj=9999966)
    Aug 12 16:37:33 archiso kernel: Security Framework initialized
    Aug 12 16:37:33 archiso kernel: Mount-cache hash table entries: 256
    Aug 12 16:37:33 archiso kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
    Aug 12 16:37:33 archiso kernel: CPU: L2 cache: 2048K
    Aug 12 16:37:33 archiso kernel: CPU: Physical Processor ID: 0
    Aug 12 16:37:33 archiso kernel: CPU: Processor Core ID: 0
    Aug 12 16:37:33 archiso kernel: using mwait in idle threads.
    Aug 12 16:37:33 archiso kernel: ACPI: Core revision 20090320
    Aug 12 16:37:33 archiso kernel: Setting APIC routing to flat
    Aug 12 16:37:33 archiso kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Aug 12 16:37:33 archiso kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
    Aug 12 16:37:33 archiso kernel: Booting processor 1 APIC 0x1 ip 0x6000
    Aug 12 16:37:33 archiso kernel: Initializing CPU#1
    Aug 12 16:37:33 archiso kernel: Calibrating delay using timer specific routine.. 6002.80 BogoMIPS (lpj=9999695)
    Aug 12 16:37:33 archiso kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
    Aug 12 16:37:33 archiso kernel: CPU: L2 cache: 2048K
    Aug 12 16:37:33 archiso kernel: CPU: Physical Processor ID: 0
    Aug 12 16:37:33 archiso kernel: CPU: Processor Core ID: 0
    Aug 12 16:37:33 archiso kernel: CPU1: Thermal monitoring enabled (TM1)
    Aug 12 16:37:33 archiso kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    Aug 12 16:37:33 archiso kernel: CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
    Aug 12 16:37:33 archiso kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Aug 12 16:37:33 archiso kernel: Brought up 2 CPUs
    Aug 12 16:37:33 archiso kernel: Total of 2 processors activated (12004.78 BogoMIPS).
    Aug 12 16:37:33 archiso kernel: net_namespace: 1888 bytes
    Aug 12 16:37:33 archiso kernel: Booting paravirtualized kernel on bare hardware
    Aug 12 16:37:33 archiso kernel: NET: Registered protocol family 16
    Aug 12 16:37:33 archiso kernel: ACPI: bus type pci registered
    Aug 12 16:37:33 archiso kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
    Aug 12 16:37:33 archiso kernel: PCI: Not using MMCONFIG.
    Aug 12 16:37:33 archiso kernel: PCI: Using configuration type 1 for base access
    Aug 12 16:37:33 archiso kernel: bio: create slab <bio-0> at 0
    Aug 12 16:37:33 archiso kernel: ACPI: Interpreter enabled
    Aug 12 16:37:33 archiso kernel: ACPI: (supports S0 S1 S4 S5)
    Aug 12 16:37:33 archiso kernel: ACPI: Using IOAPIC for interrupt routing
    Aug 12 16:37:33 archiso kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 9
    Aug 12 16:37:33 archiso kernel: PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    Aug 12 16:37:33 archiso kernel: PCI: Using MMCONFIG at e0000000 - e09fffff
    Aug 12 16:37:33 archiso kernel: ACPI: No dock devices found.
    Aug 12 16:37:33 archiso kernel: ACPI Warning (nspredef-0331): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 [20090320]
    Aug 12 16:37:33 archiso kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: PME# disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.0: PME# disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.4: PME# disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: PME# disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1d.7: PME# disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
    Aug 12 16:37:33 archiso kernel: pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    Aug 12 16:37:33 archiso kernel: pci 0000:02:00.0: PME# disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:04:00.0: PME# supported from D3hot D3cold
    Aug 12 16:37:33 archiso kernel: pci 0000:04:00.0: PME# disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1e.0: transparent bridge
    Aug 12 16:37:33 archiso kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *10 11 14 15)
    Aug 12 16:37:33 archiso kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15)
    Aug 12 16:37:33 archiso kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
    Aug 12 16:37:33 archiso kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15)
    Aug 12 16:37:33 archiso kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
    Aug 12 16:37:33 archiso kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
    Aug 12 16:37:33 archiso kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
    Aug 12 16:37:33 archiso kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *5
    Aug 12 16:37:33 archiso kernel: PCI: Using ACPI for IRQ routing
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: BAR 13: can't allocate resource
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: BAR 14: can't allocate resource
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: BAR 15: can't allocate resource
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: BAR 13: can't allocate resource
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: BAR 14: can't allocate resource
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: BAR 15: can't allocate resource
    Aug 12 16:37:33 archiso kernel: NetLabel: Initializing
    Aug 12 16:37:33 archiso kernel: NetLabel: domain hash size = 128
    Aug 12 16:37:33 archiso kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Aug 12 16:37:33 archiso kernel: NetLabel: unlabeled traffic allowed by default
    Aug 12 16:37:33 archiso kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Aug 12 16:37:33 archiso kernel: pnp: PnP ACPI init
    Aug 12 16:37:33 archiso kernel: ACPI: bus type pnp registered
    Aug 12 16:37:33 archiso kernel: pnp: PnP ACPI: found 12 devices
    Aug 12 16:37:33 archiso kernel: ACPI: ACPI bus type pnp unregistered
    Aug 12 16:37:33 archiso kernel: system 00:01: ioport range 0x800-0x83f has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: ioport range 0x1000-0x107f has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: ioport range 0x1180-0x11bf has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: ioport range 0x500-0x57f has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: ioport range 0xca8-0xca8 has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: ioport range 0xcac-0xcac has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: ioport range 0xfe00-0xfe00 has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
    Aug 12 16:37:33 archiso kernel: system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: IO window: disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: MEM window: disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: PREFETCH window: disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
    Aug 12 16:37:33 archiso kernel: pci 0000:02:00.0: IO window: 0x4000-0x4fff
    Aug 12 16:37:33 archiso kernel: pci 0000:02:00.0: MEM window: 0xc0200000-0xc02fffff
    Aug 12 16:37:33 archiso kernel: pci 0000:02:00.0: PREFETCH window: 0x000000c0500000-0x000000c05fffff
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.0: IO window: 0x4000-0x4fff
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.0: MEM window: 0xc0100000-0xc02fffff
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.0: PREFETCH window: 0x000000c0500000-0x000000c05fffff
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.4: IO window: disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.4: MEM window: 0xc0300000-0xc03fffff
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.4: PREFETCH window: disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: IO window: disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: MEM window: disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: PREFETCH window: disabled
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1e.0: IO window: 0x5000-0x5fff
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1e.0: MEM window: 0xc0400000-0xc04fffff
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1e.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
    Aug 12 16:37:33 archiso kernel: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Aug 12 16:37:33 archiso kernel: pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    Aug 12 16:37:33 archiso kernel: NET: Registered protocol family 2
    Aug 12 16:37:33 archiso kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Aug 12 16:37:33 archiso kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    Aug 12 16:37:33 archiso kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Aug 12 16:37:33 archiso kernel: TCP: Hash tables configured (established 262144 bind 65536)
    Aug 12 16:37:33 archiso kernel: TCP reno registered
    Aug 12 16:37:33 archiso kernel: NET: Registered protocol family 1
    Aug 12 16:37:33 archiso kernel: Unpacking initramfs...
    Aug 12 16:37:33 archiso kernel: Freeing initrd memory: 7221k freed
    Aug 12 16:37:33 archiso kernel: Simple Boot Flag at 0x3c set to 0x1
    Aug 12 16:37:33 archiso kernel: Scanning for low memory corruption every 60 seconds
    Aug 12 16:37:33 archiso kernel: audit: initializing netlink socket (disabled)
    Aug 12 16:37:33 archiso kernel: type=2000 audit(1250095030.473:1): initialized
    Aug 12 16:37:33 archiso kernel: VFS: Disk quotas dquot_6.5.2
    Aug 12 16:37:33 archiso kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Aug 12 16:37:33 archiso kernel: msgmni has been set to 7894
    Aug 12 16:37:33 archiso kernel: alg: No test for stdrng (krng)
    Aug 12 16:37:33 archiso kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    Aug 12 16:37:33 archiso kernel: io scheduler noop registered
    Aug 12 16:37:33 archiso kernel: io scheduler anticipatory registered
    Aug 12 16:37:33 archiso kernel: io scheduler deadline registered
    Aug 12 16:37:33 archiso kernel: io scheduler cfq registered (default)
    Aug 12 16:37:33 archiso kernel: PCI quirk: reroute interrupts for 0x8086:0x032c
    Aug 12 16:37:33 archiso kernel: Linux agpgart interface v0.103
    Aug 12 16:37:33 archiso kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Aug 12 16:37:33 archiso kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Aug 12 16:37:33 archiso kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    Aug 12 16:37:33 archiso kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Aug 12 16:37:33 archiso kernel: 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    Aug 12 16:37:33 archiso kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
    Aug 12 16:37:33 archiso kernel: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    Aug 12 16:37:33 archiso kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Aug 12 16:37:33 archiso kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Aug 12 16:37:33 archiso kernel: mice: PS/2 mouse device common for all mice
    Aug 12 16:37:33 archiso kernel: cpuidle: using governor ladder
    Aug 12 16:37:33 archiso kernel: cpuidle: using governor menu
    Aug 12 16:37:33 archiso kernel: TCP cubic registered
    Aug 12 16:37:33 archiso kernel: NET: Registered protocol family 17
    Aug 12 16:37:33 archiso kernel: registered taskstats version 1
    Aug 12 16:37:33 archiso kernel: Initalizing network drop monitor service
    Aug 12 16:37:33 archiso kernel: Freeing unused kernel memory: 464k freed
    Aug 12 16:37:33 archiso kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    Aug 12 16:37:33 archiso kernel: SCSI subsystem initialized
    Aug 12 16:37:33 archiso kernel: usbcore: registered new interface driver usbfs
    Aug 12 16:37:33 archiso kernel: usbcore: registered new interface driver hub
    Aug 12 16:37:33 archiso kernel: usbcore: registered new device driver usb
    Aug 12 16:37:33 archiso kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Aug 12 16:37:33 archiso kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Aug 12 16:37:33 archiso kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
    Aug 12 16:37:33 archiso kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    Aug 12 16:37:33 archiso kernel: ehci_hcd 0000:00:1d.7: debug port 1
    Aug 12 16:37:33 archiso kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc0000000
    Aug 12 16:37:33 archiso kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Aug 12 16:37:33 archiso kernel: usb usb1: configuration #1 chosen from 1 choice
    Aug 12 16:37:33 archiso kernel: hub 1-0:1.0: USB hub found
    Aug 12 16:37:33 archiso kernel: hub 1-0:1.0: 6 ports detected
    Aug 12 16:37:33 archiso kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003000
    Aug 12 16:37:33 archiso kernel: usb usb2: configuration #1 chosen from 1 choice
    Aug 12 16:37:33 archiso kernel: hub 2-0:1.0: USB hub found
    Aug 12 16:37:33 archiso kernel: hub 2-0:1.0: 2 ports detected
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
    Aug 12 16:37:33 archiso kernel: usb usb3: configuration #1 chosen from 1 choice
    Aug 12 16:37:33 archiso kernel: hub 3-0:1.0: USB hub found
    Aug 12 16:37:33 archiso kernel: hub 3-0:1.0: 2 ports detected
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    Aug 12 16:37:33 archiso kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
    Aug 12 16:37:33 archiso kernel: usb usb4: configuration #1 chosen from 1 choice
    Aug 12 16:37:33 archiso kernel: hub 4-0:1.0: USB hub found
    Aug 12 16:37:33 archiso kernel: hub 4-0:1.0: 2 ports detected
    Aug 12 16:37:33 archiso kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    Aug 12 16:37:33 archiso kernel: scsi0 : ata_piix
    Aug 12 16:37:33 archiso kernel: scsi1 : ata_piix
    Aug 12 16:37:33 archiso kernel: aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
    Aug 12 16:37:33 archiso kernel: aic94xx 0000:03:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    Aug 12 16:37:33 archiso kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
    Aug 12 16:37:33 archiso kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
    Aug 12 16:37:33 archiso kernel: aic94xx: found Adaptec AIC-9405W SAS/SATA Host Adapter, device 0000:03:04.0
    Aug 12 16:37:33 archiso kernel: scsi2 : aic94xx
    Aug 12 16:37:33 archiso kernel: aic94xx 0000:03:04.0: firmware: requesting aic94xx-seq.fw
    Aug 12 16:37:33 archiso kernel: aic94xx: Failed to load sequencer firmware file aic94xx-seq.fw, error -2
    Aug 12 16:37:33 archiso kernel: aic94xx: couldn't init seqs for 0000:03:04.0
    Aug 12 16:37:33 archiso kernel: aic94xx: couldn't init the chip
    Aug 12 16:37:33 archiso kernel: aic94xx 0000:03:04.0: PCI INT A disabled
    Aug 12 16:37:33 archiso kernel: aic94xx: probe of 0000:03:04.0 failed with error -2
    Aug 12 16:37:33 archiso kernel: ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
    Aug 12 16:37:33 archiso kernel: ata1.00: limited to UDMA/33 due to 40-wire cable
    Aug 12 16:37:33 archiso kernel: ata1.00: configured for UDMA/33
    Aug 12 16:37:33 archiso kernel: scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
    Aug 12 16:37:33 archiso kernel: Driver 'sr' needs updating - please use bus_type methods
    Aug 12 16:37:33 archiso kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Aug 12 16:37:33 archiso kernel: Uniform CD-ROM driver Revision: 3.20
    Aug 12 16:37:33 archiso kernel: usb 2-1: new low speed USB device using uhci_hcd and address 2
    Aug 12 16:37:33 archiso kernel: usb 2-1: configuration #1 chosen from 1 choice
    Aug 12 16:37:33 archiso kernel: usbcore: registered new interface driver hiddev
    Aug 12 16:37:33 archiso kernel: input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
    Aug 12 16:37:33 archiso kernel: generic-usb 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1/input0
    Aug 12 16:37:33 archiso kernel: usbcore: registered new interface driver usbhid
    Aug 12 16:37:33 archiso kernel: usbhid: v2.6:USB HID core driver
    Aug 12 16:37:33 archiso kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
    Aug 12 16:37:33 archiso kernel: aufs 2-standalone.tree-20090601
    Aug 12 16:37:33 archiso kernel: loop: module loaded
    Aug 12 16:37:33 archiso kernel: aufs test_add:240:mount[635]: uid/gid/perm /tmpfs/mnt/loop0 0/0/0755, 0/0/01777
    Aug 12 16:37:33 archiso kernel: aufs test_add:240:mount[648]: uid/gid/perm /tmpfs/mnt/loop2 0/0/0755, 0/0/01777
    Aug 12 16:37:33 archiso kernel: rtc_cmos 00:04: RTC can wake from S4
    Aug 12 16:37:33 archiso kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    Aug 12 16:37:33 archiso kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    Aug 12 16:37:33 archiso kernel: udev: starting version 141
    Aug 12 16:37:33 archiso kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3
    Aug 12 16:37:33 archiso kernel: intel_rng: FWH not detected
    Aug 12 16:37:33 archiso kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Aug 12 16:37:33 archiso kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Aug 12 16:37:33 archiso kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    Aug 12 16:37:33 archiso kernel: ACPI: Power Button [PWRF]
    Aug 12 16:37:33 archiso kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input5
    Aug 12 16:37:33 archiso kernel: ACPI: Power Button [PWRB]
    Aug 12 16:37:33 archiso kernel: EDAC MC: Ver: 2.1.0 Jul 31 2009
    Aug 12 16:37:33 archiso kernel: iTCO_vendor_support: vendor-support=0
    Aug 12 16:37:33 archiso kernel: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Aug 12 16:37:33 archiso kernel: tg3.c:v3.98 (February 25, 2009)
    Aug 12 16:37:33 archiso kernel: tg3 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Aug 12 16:37:33 archiso kernel: tg3 0000:04:00.0: PME# disabled
    Aug 12 16:37:33 archiso kernel: eth0: Tigon3 [partno(BCM95721) rev 4101] (PCI Express) MAC address 00:11:25:a4:42:2f
    Aug 12 16:37:33 archiso kernel: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    Aug 12 16:37:33 archiso kernel: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
    Aug 12 16:37:33 archiso kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    Aug 12 16:37:33 archiso kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5
    Aug 12 16:37:33 archiso kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    Aug 12 16:37:33 archiso kernel: iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x1060)
    Aug 12 16:37:33 archiso kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Aug 12 16:37:33 archiso kernel: processor ACPI_CPU:00: registered as cooling_device0
    Aug 12 16:37:33 archiso kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
    Aug 12 16:37:33 archiso kernel: processor ACPI_CPU:01: registered as cooling_device1
    Aug 12 16:37:33 archiso kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
    Aug 12 16:37:33 archiso kernel: EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0
    Aug 12 16:37:33 archiso kernel: EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
    Aug 12 16:37:33 archiso kernel: lp: driver loaded but no devices found
    Aug 12 16:37:33 archiso kernel: parport_pc 00:0b: reported by Plug and Play ACPI
    Aug 12 16:37:33 archiso kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    Aug 12 16:37:33 archiso kernel: lp0: using parport0 (interrupt-driven).
    Aug 12 16:37:33 archiso kernel: ppdev: user-space parallel port driver
    Aug 12 16:37:31 archiso init: Entering runlevel: 3
    Aug 12 16:38:08 archiso kernel: tg3 0000:04:00.0: PME# disabled
    Aug 12 16:38:09 archiso kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
    Aug 12 16:38:09 archiso kernel: tg3: eth0: Flow control is on for TX and on for RX.
    Aug 12 16:42:52 archiso kernel: device-mapper: uevent: version 1.0.3
    Aug 12 16:42:52 archiso kernel: device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
    Aug 12 16:43:49 archiso kernel: usb 1-4: new high speed USB device using ehci_hcd and address 3
    Aug 12 16:43:50 archiso kernel: usb 1-4: configuration #1 chosen from 1 choice
    Aug 12 16:43:50 archiso kernel: Initializing USB Mass Storage driver...
    Aug 12 16:43:50 archiso kernel: scsi3 : SCSI emulation for USB Mass Storage devices
    Aug 12 16:43:50 archiso kernel: usbcore: registered new interface driver usb-storage
    Aug 12 16:43:50 archiso kernel: USB Mass Storage support registered.
    Aug 12 16:43:55 archiso kernel: scsi 3:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
    Aug 12 16:43:55 archiso kernel: scsi 3:0:0:0: Attached scsi generic sg1 type 0
    Aug 12 16:43:55 archiso kernel: Driver 'sd' needs updating - please use bus_type methods
    Aug 12 16:43:55 archiso kernel: sd 3:0:0:0: [sda] 7876608 512-byte hardware sectors: (4.03 GB/3.75 GiB)
    Aug 12 16:43:55 archiso kernel: sd 3:0:0:0: [sda] Write Protect is off
    Aug 12 16:43:55 archiso kernel: sda: sda1
    Aug 12 16:43:55 archiso kernel: sd 3:0:0:0: [sda] Attached SCSI removable disk
    I'm following your last instructions  ... no results.

  • [SOLVED] Arch Linux won't boot

    Hi,
    I was bad and didn't update my packages often enough, and now my arch installation on a desktop won't boot.
    I've booted off of a usb arch install, mounted all of the appropriate harddrive partitions, and used arch-chroot to switch to the offending hard drive.
    The /boot/syslinux/syslinux.cfg is such:
    # Config file for Syslinux -
    # /boot/syslinux/syslinux.cfg
    # Comboot modules:
    # * menu.c32 - provides a text menu
    # * vesamenu.c32 - provides a graphical menu
    # * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloa
    ders
    # * hdt.c32 - hardware detection tool
    # * reboot.c32 - reboots the system
    # * poweroff.com - shutdown the system
    # To Use: Copy the respective files from /usr/lib/syslinux to /boot/sysli
    nux.
    # If /usr and /boot are on the same file system, symlink the files instea
    d
    # of copying them.
    # If you do not use a menu, a 'boot:' prompt will be shown and the system
    # will boot automatically after 5 seconds.
    # Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
    # The wiki provides further configuration examples
    DEFAULT arch
    PROMPT 0 # Set to 1 if you always want to display the boot: prompt
    TIMEOUT 50
    # You can create syslinux keymaps with the keytab-lilo tool
    #KBDMAP de.ktl
    # Menu Configuration
    # Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
    UI menu.c32
    #UI vesamenu.c32
    # Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
    MENU TITLE Arch Linux
    #MENU BACKGROUND splash.png
    MENU COLOR border 30;44 #40ffffff #a0000000 std
    MENU COLOR title 1;36;44 #9033ccff #a0000000 std
    MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
    MENU COLOR unsel 37;44 #50ffffff #a0000000 std
    MENU COLOR help 37;40 #c0ffffff #a0000000 std
    MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
    MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
    MENU COLOR msg07 37;40 #90ffffff #a0000000 std
    MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
    # boot sections follow
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel l
    ine.
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/md0 ro
    INITRD ../initramfs-linux.img
    LABEL archfallback
    MENU LABEL Arch Linux Fallback
    LINUX ../vmlinuz-linux
    APPEND root=/dev/md0 ro
    INITRD ../initramfs-linux-fallback.img
    #LABEL windows
    # MENU LABEL Windows
    # COM32 chain.c32
    # APPEND hd0 1
    LABEL hdt
    MENU LABEL HDT (Hardware Detection Tool)
    COM32 hdt.c32
    LABEL reboot
    MENU LABEL Reboot
    COM32 reboot.c32
    LABEL off
    MENU LABEL Power Off
    COMBOOT poweroff.com
    and /etc/mdadm.conf is:
    ARRAY /dev/md0 UUID=3830049a:44459d91:3ad800a8:e77f102f
    ARRAY /dev/md1 UUID=a69afb27:1266d0c2:0c8966db:14500cdb
    ARRAY /dev/md2 UUID=20b0675c:2fcca1a5:0882d652:06324bf6
    ARRAY /dev/md3 UUID=3f0343cb:ff7342c9:fe8e73d4:ba6d61b3
    ARRAY /dev/md4 UUID=287c6b6d:8cbd733c:c6e9d285:a2b14814
    ARRAY /dev/md5 UUID=ccd0d21c:8103251b:2c9a32d1:bc6dcc78
    and it looks to me like this agrees with blkid:
    sh-4.3# blkid
    /dev/sda1: UUID="3830049a-4445-9d91-3ad8-00a8e77f102f" UUID_SUB="932acc3b-f7ba-d443-cf76-9d59b663c651" LABEL="archiso:0" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="9574bd41-8133-4c6a-b5b4-981002a41867"
    /dev/sda2: UUID="a69afb27-1266-d0c2-0c89-66db14500cdb" UUID_SUB="e3de7e2c-8153-0c53-ac5d-ffc678deb269" LABEL="archiso:1" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="fc78d66d-53a4-4c99-a29c-b881d19c1e8d"
    /dev/sda3: UUID="20b0675c-2fcc-a1a5-0882-d65206324bf6" UUID_SUB="36f53577-cd9b-0c4e-4223-58123a6b2426" LABEL="archiso:2" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="b7187772-bf01-4517-99a1-d2aa209aa35b"
    /dev/sda4: UUID="3f0343cb-ff73-42c9-fe8e-73d4ba6d61b3" UUID_SUB="e583cdb9-f523-b4ea-01bb-609779ca3efe" LABEL="archiso:3" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="df9fddd2-762b-4eb3-860c-ef79f545fa77"
    /dev/sda5: UUID="287c6b6d-8cbd-733c-c6e9-d285a2b14814" UUID_SUB="ec1c493a-97f0-48e2-1659-068c25b7aa55" LABEL="archiso:4" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="ba388b64-8f6b-4053-a695-14560832735e"
    /dev/sda6: UUID="ccd0d21c-8103-251b-2c9a-32d1bc6dcc78" UUID_SUB="9b53306f-941d-8048-5780-533ada837e11" LABEL="archiso:5" TYPE="linux_raid_member" PARTLABEL="Microsoft basic data" PARTUUID="6325add3-aa39-4fa2-995c-aacf7165097c"
    /dev/sdb1: UUID="3830049a-4445-9d91-3ad8-00a8e77f102f" UUID_SUB="ec3420f6-d21a-5e69-94f8-d81f277079ec" LABEL="archiso:0" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="9574bd41-8133-4c6a-b5b4-981002a41867"
    /dev/sdb2: UUID="a69afb27-1266-d0c2-0c89-66db14500cdb" UUID_SUB="4b1e7230-ffec-0985-1ac7-a69aec27eec2" LABEL="archiso:1" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="fc78d66d-53a4-4c99-a29c-b881d19c1e8d"
    /dev/sdb3: UUID="20b0675c-2fcc-a1a5-0882-d65206324bf6" UUID_SUB="4d1721b6-d87f-00b6-4bd9-45712592b033" LABEL="archiso:2" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="b7187772-bf01-4517-99a1-d2aa209aa35b"
    /dev/sdb4: UUID="3f0343cb-ff73-42c9-fe8e-73d4ba6d61b3" UUID_SUB="085a16ce-1a7c-d79e-eb92-fed6b1b70365" LABEL="archiso:3" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="df9fddd2-762b-4eb3-860c-ef79f545fa77"
    /dev/sdb5: UUID="287c6b6d-8cbd-733c-c6e9-d285a2b14814" UUID_SUB="10857018-548a-9311-178e-7d2b06e25942" LABEL="archiso:4" TYPE="linux_raid_member" PARTLABEL="Linux RAID" PARTUUID="ba388b64-8f6b-4053-a695-14560832735e"
    /dev/sdb6: UUID="ccd0d21c-8103-251b-2c9a-32d1bc6dcc78" UUID_SUB="d577ff9e-a687-f335-7062-f2f629886a58" LABEL="archiso:5" TYPE="linux_raid_member" PARTLABEL="Microsoft basic data" PARTUUID="6325add3-aa39-4fa2-995c-aacf7165097c"
    /dev/sdc1: LABEL="/dev/sdc1" UUID="de2a5dc6-4b22-466f-819a-86dda839c7e6" TYPE="ext4" PARTUUID="c3072e18-01"
    /dev/sdc2: LABEL="/dev/sdc2" UUID="2909b560-e9b9-48cf-a194-7b7c9c38d312" TYPE="ext4" PARTUUID="c3072e18-02"
    /dev/md127: UUID="3f9ddf01-4f7c-4633-844d-82a1781170a5" TYPE="ext4"
    /dev/md126: UUID="7105ac32-610b-4d4b-935b-675edc71ff32" TYPE="ext4"
    /dev/md125: UUID="90cc6dbe-2d0f-422b-8653-965f103b8e8d" TYPE="ext4"
    /dev/md124: UUID="5fd8960f-6017-49c8-bc7e-c972aa0e2f31" TYPE="ext4"
    /dev/md123: UUID="7B9075B74838729A" TYPE="ntfs"
    /dev/md122: UUID="96468ceb-857b-467e-b9c7-2a37e13fde6f" TYPE="ext4"
    and lsblk is:
    sh-4.3# lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 931.5G 0 disk
    |-sda1 8:1 0 1G 0 part
    | `-md126 9:126 0 1024M 0 raid1 /boot
    |-sda2 8:2 0 24G 0 part
    | `-md122 9:122 0 24G 0 raid1 /
    |-sda3 8:3 0 15G 0 part
    | `-md127 9:127 0 15G 0 raid1 /var
    |-sda4 8:4 0 100G 0 part
    | `-md125 9:125 0 100G 0 raid1 /home/j3doucet
    |-sda5 8:5 0 100G 0 part
    | `-md124 9:124 0 100G 0 raid1 /home/c2hollow
    `-sda6 8:6 0 691.5G 0 part
    `-md123 9:123 0 691.4G 0 raid1 /media
    sdb 8:16 0 931.5G 0 disk
    |-sdb1 8:17 0 1G 0 part
    | `-md126 9:126 0 1024M 0 raid1 /boot
    |-sdb2 8:18 0 24G 0 part
    | `-md122 9:122 0 24G 0 raid1 /
    |-sdb3 8:19 0 15G 0 part
    | `-md127 9:127 0 15G 0 raid1 /var
    |-sdb4 8:20 0 100G 0 part
    | `-md125 9:125 0 100G 0 raid1 /home/j3doucet
    |-sdb5 8:21 0 100G 0 part
    | `-md124 9:124 0 100G 0 raid1 /home/c2hollow
    `-sdb6 8:22 0 691.5G 0 part
    `-md123 9:123 0 691.4G 0 raid1 /media
    sdc 8:32 1 58.9G 0 disk
    |-sdc1 8:33 1 19.5G 0 part /etc/resolv.conf
    `-sdc2 8:34 1 39.4G 0 part
    sr0 11:0 1 1024M 0 rom
    Everything looks fine to me, /dev/sda1 is /boot, which has the same UUID as what mdadm has for /dev/md0, which is what syslinux.cfg has been told to boot off of. I'm not sure what to do from here.
    Last edited by c2hollow (2015-01-02 00:43:56)

    It's long that Arch uses rw argument on kernel command line.
    You should correct your syslinux.cfg as follow.
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=LABEL="archiso:1" rw ## <<< Here's the diff
    INITRD ../initramfs-linux.img
    This isn't for the fallback menu entry, you just analyze the differences and do same there.
    I'm not familiar with syslinux, I just suppose you may try to test these options on-the-fly, before write them permanently. So when the syslinux menu will appear at boot time, please find the way to enter in edit mode and apply the correction. That will stay for the time you boot once. But it will ensure if it'll be good enough and do the writing later once you've booted.

  • Slow boot up speed-Arch Linux

    Hi everyone,i am facing two important problems in my Arch Linux
    1)Slow boot-up and Shut-down
    2)Poor battery life
    I am using an Dell Inspiron-N5010 laptop with intel-i3 processor and 3 GB RAM and i have updated my Arch system recently and my kernel version is
    Linux 3.12.9-2-ARCH #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014 x86_64 GNU/Linux
    Login Manager=GDM
    Desktop Environment=Cinnamon 2.0.14
    Here is my /etc/mkinitcpio.conf
    MODULES="i915 drm_kms_helper msr intel_agp dell_wmi dell_laptop acpi"
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect modconf block fsck filesystems keyboard fsck"
    Here is my output of systemd-analyze blame
    5.927s pacman-init.service
    4.811s NetworkManager.service
    4.686s dkms.service
    2.206s systemd-logind.service
    2.126s gdm.service
    1.672s systemd-vconsole-setup.service
    1.327s plymouth-read-write.service
    1.232s plymouth-start.service
    1.104s kmod-static-nodes.service
    1.073s polkit.service
    1.038s systemd-fsck-root.service
    1.012s systemd-udev-trigger.service
    866ms accounts-daemon.service
    813ms systemd-modules-load.service
    785ms systemd-sysctl.service
    785ms sys-kernel-debug.mount
    784ms dev-mqueue.mount
    784ms dev-hugepages.mount
    587ms colord.service
    569ms sys-kernel-config.mount
    504ms systemd-backlight@acpi_video0.service
    496ms systemd-journal-flush.service
    422ms systemd-tmpfiles-setup-dev.service
    402ms tmp.mount
    400ms systemd-tmpfiles-clean.service
    396ms dhcpcd.service
    233ms systemd-random-seed.service
    229ms haveged.service
    217ms etc-pacman.d-gnupg.mount
    182ms wpa_supplicant.service
    181ms systemd-remount-fs.service
    129ms systemd-user-sessions.service
    115ms systemd-udevd.service
    114ms systemd-update-utmp.service
    81ms udisks2.service
    76ms systemd-tmpfiles-setup.service
    71ms dev-disk-by\x2duuid-6ff023ec\x2d720b\x2d4c7a\x2d87ff\x2ddf5224b293c3.swap
    63ms upower.service
    58ms cpupower.service
    56ms laptop-mode.service
    51ms rtkit-daemon.service
    43ms [email protected]
    10ms alsa-restore.service
    and still its taking more time to get the Display Manager and after entering my login and password its taking more time to get my cinnamon desktop
    I am using Laptop-Mode-Tools ,cpupower(Conservative Governor),Thermald to improve my batterylife but nothing is helping me out its just 45~1 hour in my arch system but its actually 2 to 2.5 hours in my windows 7
    and i was googling for good solutions but nothing is helping me to get out of  the problems and i hope i could fix this issue by means of this forum.

    Neburski wrote:
    Dinesh raja wrote:No its not Manjaro but an custom system which i have built using Arch-Iso
    Ah, anyway identify all the service files for systemd to see if there are some that you don't need. Looks like you already did.
    For the slow boot up and shutdown you could give a closer look at dmesg.
    Check http://freedesktop.org/wiki/Software/sy … eventually to see how you can save your dmesg for the shutdown part. Then look for entries that have a large gap in time (the numbers in [###] are seconds since bootup).
    Can you maybe also define slow. How many seconds / minutes does it take?
    its taking 23.099s for Kernel+User space and the time gap between Display Manager and Cinnamon desktop is approximately 30 sto 40 s
    here is my dmesg complete output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.9-2-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=175a6905-635d-455d-a489-e2afaaaeb274 ro quiet splash resume=/dev/sda6 i915.semaphores=1 i915.i915_enable_rc6=0
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b75a5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b75a6000-0x00000000b75edfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b75ee000-0x00000000b75f8fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000b75f9000-0x00000000b75fbfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b75fc000-0x00000000b761ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7620000-0x00000000b7620fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7621000-0x00000000b7628fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7629000-0x00000000b762bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b762c000-0x00000000b7630fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7631000-0x00000000b7650fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7651000-0x00000000b7693fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7694000-0x00000000b77fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b9e00000-0x00000000bbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: Dell Inc. Inspiron N5010/0P2H9M, BIOS A09 10/19/2010
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0xb7800 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 0B8000000 mask FF8000000 uncachable
    [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fcda0-0x000fcdaf] mapped at [ffff8800000fcda0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xb7200000-0xb73fffff]
    [ 0.000000] [mem 0xb7200000-0xb73fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xb4000000-0xb71fffff]
    [ 0.000000] [mem 0xb4000000-0xb71fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x80000000-0xb3ffffff]
    [ 0.000000] [mem 0x80000000-0xb3ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0xb7400000-0xb75a5fff]
    [ 0.000000] [mem 0xb7400000-0xb75a5fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xb7620000-0xb7620fff]
    [ 0.000000] [mem 0xb7620000-0xb7620fff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xb7694000-0xb77fffff]
    [ 0.000000] [mem 0xb7694000-0xb77fffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x37912000-0x37c80fff]
    [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 DELL )
    [ 0.000000] ACPI: XSDT 00000000b75ee088 0005C (v01 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000b75f7a50 000F4 (v04 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130725/tbfadt-395)
    [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xB762CF40/0x00000000B762CF80, using 32 (20130725/tbfadt-522)
    [ 0.000000] ACPI: DSDT 00000000b75ee170 098DF (v02 DELL WN09 00005010 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000b762cf40 00040
    [ 0.000000] ACPI: APIC 00000000b75f7b48 00072 (v01 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 00000000b75f7bc0 0014E (v01 AMICPU PROC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 00000000b75f7d10 0003C (v01 DELL WN09 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SLIC 00000000b75f7d50 00176 (v01 DELL WN09 01072009 AMI 00010013)
    [ 0.000000] ACPI: HPET 00000000b75f7ec8 00038 (v01 DELL WN09 01072009 AMI. 00000003)
    [ 0.000000] ACPI: OSFR 00000000b75f7f00 0008C (v01 DELL M08 07DA0A13 ASL 00000061)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b77fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb77fffff]
    [ 0.000000] NODE_DATA [mem 0xb77fb000-0xb77fffff]
    [ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b3c00000-ffff8800b69fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xb75a5fff]
    [ 0.000000] node 0: [mem 0xb7620000-0xb7620fff]
    [ 0.000000] node 0: [mem 0xb7694000-0xb77fffff]
    [ 0.000000] On node 0 totalpages: 751279
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11680 pages used for memmap
    [ 0.000000] DMA32 zone: 747283 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb75a6000-0xb75edfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb75ee000-0xb75f8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb75f9000-0xb75fbfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb75fc000-0xb761ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb7621000-0xb7628fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb7629000-0xb762bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb762c000-0xb7630fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb7631000-0xb7650fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xb7651000-0xb7693fff]
    [ 0.000000] e820: [mem 0xbc000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800b7000000 s86464 r8192 d24128 u524288
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 739514
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=175a6905-635d-455d-a489-e2afaaaeb274 ro quiet splash resume=/dev/sda6 i915.semaphores=1 i915.i915_enable_rc6=0
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2942184K/3005116K available (5119K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 62932K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 12058624 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2260.785 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4523.96 BogoMIPS (lpj=7535950)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000041] Security Framework initialized
    [ 0.000053] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000055] Yama: becoming mindful.
    [ 0.000408] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002121] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002882] Mount-cache hash table entries: 256
    [ 0.003130] Initializing cgroup subsys memory
    [ 0.003144] Initializing cgroup subsys devices
    [ 0.003147] Initializing cgroup subsys freezer
    [ 0.003149] Initializing cgroup subsys net_cls
    [ 0.003151] Initializing cgroup subsys blkio
    [ 0.003177] CPU: Physical Processor ID: 0
    [ 0.003178] CPU: Processor Core ID: 0
    [ 0.003185] mce: CPU supports 9 MCE banks
    [ 0.003198] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003211] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 6
    [ 0.003319] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.004634] ACPI: Core revision 20130725
    [ 0.009965] ACPI: All ACPI Tables successfully acquired
    [ 0.019630] ftrace: allocating 20320 entries in 80 pages
    [ 0.032100] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.065112] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz (fam: 06, model: 25, stepping: 02)
    [ 0.171587] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    [ 0.171595] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.171599] ... version: 3
    [ 0.171600] ... bit width: 48
    [ 0.171601] ... generic registers: 4
    [ 0.171602] ... value mask: 0000ffffffffffff
    [ 0.171604] ... max period: 000000007fffffff
    [ 0.171605] ... fixed-purpose events: 3
    [ 0.171606] ... event mask: 000000070000000f
    [ 0.211654] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.198312] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.251580] Brought up 4 CPUs
    [ 0.251586] smpboot: Total of 4 processors activated (18093.87 BogoMIPS)
    [ 0.254266] devtmpfs: initialized
    [ 0.257030] PM: Registering ACPI NVS region [mem 0xb75a6000-0xb75edfff] (294912 bytes)
    [ 0.257037] PM: Registering ACPI NVS region [mem 0xb75f9000-0xb75fbfff] (12288 bytes)
    [ 0.257039] PM: Registering ACPI NVS region [mem 0xb7621000-0xb7628fff] (32768 bytes)
    [ 0.257040] PM: Registering ACPI NVS region [mem 0xb762c000-0xb7630fff] (20480 bytes)
    [ 0.257042] PM: Registering ACPI NVS region [mem 0xb7651000-0xb7693fff] (274432 bytes)
    [ 0.258060] RTC time: 15:04:06, date: 02/18/14
    [ 0.258105] NET: Registered protocol family 16
    [ 0.258225] cpuidle: using governor ladder
    [ 0.258227] cpuidle: using governor menu
    [ 0.258271] ACPI: bus type PCI registered
    [ 0.258273] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.258334] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.258337] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.281454] PCI: Using configuration type 1 for base access
    [ 0.282099] bio: create slab <bio-0> at 0
    [ 0.282221] ACPI: Added _OSI(Module Device)
    [ 0.282223] ACPI: Added _OSI(Processor Device)
    [ 0.282225] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282226] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.283469] ACPI: EC: Look up EC in DSDT
    [ 0.284754] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.289116] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.302665] ACPI: SSDT 00000000b7621c18 003A4 (v01 AMI IST 00000001 MSFT 03000001)
    [ 0.303013] ACPI: Dynamic OEM Table Load:
    [ 0.303016] ACPI: SSDT (null) 003A4 (v01 AMI IST 00000001 MSFT 03000001)
    [ 0.303484] ACPI: Interpreter enabled
    [ 0.303491] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.303495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.303510] ACPI: (supports S0 S3 S4 S5)
    [ 0.303512] ACPI: Using IOAPIC for interrupt routing
    [ 0.303547] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.303686] ACPI: No dock devices found.
    [ 0.322094] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.322239] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.322442] acpi PNP0A08:00: ACPI _OSC control (0x19) granted
    [ 0.322704] PCI host bridge to bus 0000:00
    [ 0.322708] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.322710] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.322712] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.322714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.322716] pci_bus 0000:00: root bus resource [mem 0xbc000000-0xffffffff]
    [ 0.322725] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
    [ 0.322744] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 0.322818] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
    [ 0.322831] pci 0000:00:02.0: reg 0x10: [mem 0xfa400000-0xfa7fffff 64bit]
    [ 0.322838] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.322843] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
    [ 0.322962] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
    [ 0.322991] pci 0000:00:16.0: reg 0x10: [mem 0xfbd09000-0xfbd0900f 64bit]
    [ 0.323088] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.323185] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.323212] pci 0000:00:1a.0: reg 0x10: [mem 0xfbd08000-0xfbd083ff]
    [ 0.323324] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.325807] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.325857] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.325880] pci 0000:00:1b.0: reg 0x10: [mem 0xfbd00000-0xfbd03fff 64bit]
    [ 0.325979] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.326066] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 0.326169] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.326222] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.326261] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 0.326362] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.326415] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.326453] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
    [ 0.326553] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.326608] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.326649] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
    [ 0.326750] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.326803] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.326851] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.326878] pci 0000:00:1d.0: reg 0x10: [mem 0xfbd07000-0xfbd073ff]
    [ 0.326988] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.329810] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.329853] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.329965] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.330003] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
    [ 0.330187] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
    [ 0.330216] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
    [ 0.330227] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
    [ 0.330238] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
    [ 0.330249] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
    [ 0.330261] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
    [ 0.330272] pci 0000:00:1f.2: reg 0x24: [mem 0xfbd06000-0xfbd067ff]
    [ 0.330340] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.330421] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.330443] pci 0000:00:1f.3: reg 0x10: [mem 0xfbd05000-0xfbd050ff 64bit]
    [ 0.330474] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    [ 0.330575] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
    [ 0.330604] pci 0000:00:1f.6: reg 0x10: [mem 0xfbd04000-0xfbd04fff 64bit]
    [ 0.330829] pci 0000:00:1c.0: PCI bridge to [bus 11]
    [ 0.330946] pci 0000:12:00.0: [14e4:4727] type 00 class 0x028000
    [ 0.330979] pci 0000:12:00.0: reg 0x10: [mem 0xfbc00000-0xfbc03fff 64bit]
    [ 0.331144] pci 0000:12:00.0: supports D1 D2
    [ 0.331146] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
    [ 0.338279] pci 0000:00:1c.1: PCI bridge to [bus 12]
    [ 0.338291] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
    [ 0.338460] pci 0000:13:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.338526] pci 0000:13:00.0: reg 0x10: [io 0xe000-0xe0ff]
    [ 0.338640] pci 0000:13:00.0: reg 0x18: [mem 0xd0b10000-0xd0b10fff 64bit pref]
    [ 0.338706] pci 0000:13:00.0: reg 0x20: [mem 0xd0b00000-0xd0b0ffff 64bit pref]
    [ 0.338752] pci 0000:13:00.0: reg 0x30: [mem 0xfb200000-0xfb21ffff pref]
    [ 0.338976] pci 0000:13:00.0: supports D1 D2
    [ 0.338978] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.339173] pci 0000:00:1c.2: PCI bridge to [bus 13]
    [ 0.339178] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.339183] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfbbfffff]
    [ 0.339190] pci 0000:00:1c.2: bridge window [mem 0xd0b00000-0xd14fffff 64bit pref]
    [ 0.339268] pci 0000:00:1c.4: PCI bridge to [bus 15]
    [ 0.339274] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.339278] pci 0000:00:1c.4: bridge window [mem 0xfa800000-0xfb1fffff]
    [ 0.339286] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
    [ 0.339371] pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode)
    [ 0.339385] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.339387] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.339389] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.339391] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xffffffff] (subtractive decode)
    [ 0.339814] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.339874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.339932] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.339990] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.340047] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.340106] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.340164] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.340222] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.340440] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.340472] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.340534] Found 1 acpi root devices
    [ 0.340641] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.340644] vgaarb: loaded
    [ 0.340645] vgaarb: bridge control possible 0000:00:02.0
    [ 0.340690] PCI: Using ACPI for IRQ routing
    [ 0.350522] PCI: Discovered peer bus ff
    [ 0.350524] PCI: root bus ff: using default resources
    [ 0.350525] PCI: Probing PCI hardware (bus ff)
    [ 0.350548] PCI host bridge to bus 0000:ff
    [ 0.350551] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
    [ 0.350553] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
    [ 0.350555] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
    [ 0.350561] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
    [ 0.350602] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
    [ 0.350643] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
    [ 0.350680] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
    [ 0.350718] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
    [ 0.350756] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
    [ 0.350804] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
    [ 0.350807] PCI: pci_cache_line_size set to 64 bytes
    [ 0.350880] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
    [ 0.350882] e820: reserve RAM buffer [mem 0xb75a6000-0xb7ffffff]
    [ 0.350884] e820: reserve RAM buffer [mem 0xb7621000-0xb7ffffff]
    [ 0.350886] e820: reserve RAM buffer [mem 0xb7800000-0xb7ffffff]
    [ 0.350986] NetLabel: Initializing
    [ 0.350988] NetLabel: domain hash size = 128
    [ 0.350989] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.351002] NetLabel: unlabeled traffic allowed by default
    [ 0.351040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.351046] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.353079] Switched to clocksource hpet
    [ 0.357893] pnp: PnP ACPI init
    [ 0.357912] ACPI: bus type PNP registered
    [ 0.358057] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.358060] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.358062] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.358064] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.358066] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.358070] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.358105] pnp 00:01: [dma 4]
    [ 0.358125] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.358162] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.358187] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.358217] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.358267] system 00:05: [io 0x04d0-0x04d1] has been reserved
    [ 0.358270] system 00:05: [mem 0xfe800000-0xfe8001ff] has been reserved
    [ 0.358273] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.358309] pnp 00:06: Plug and Play ACPI device, IDs DLL0447 SYN0600 SYN0002 PNP0f13 (active)
    [ 0.358347] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.358508] system 00:08: [io 0x0400-0x047f] could not be reserved
    [ 0.358511] system 00:08: [io 0x1180-0x119f] has been reserved
    [ 0.358513] system 00:08: [io 0x0500-0x057f] has been reserved
    [ 0.358516] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.358518] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.358520] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.358523] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.358526] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.358636] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.358854] pnp: PnP ACPI: found 10 devices
    [ 0.358856] ACPI: bus type PNP unregistered
    [ 0.365989] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 11] add_size 1000
    [ 0.365994] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11] add_size 200000
    [ 0.365996] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 11] add_size 200000
    [ 0.366007] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 12] add_size 1000
    [ 0.366010] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12] add_size 200000
    [ 0.366040] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.366042] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.366044] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.366047] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.366049] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.366053] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc000000-0xbc1fffff]
    [ 0.366056] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc200000-0xbc3fffff 64bit pref]
    [ 0.366059] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbc400000-0xbc5fffff 64bit pref]
    [ 0.366061] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.366064] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.366066] pci 0000:00:1c.0: PCI bridge to [bus 11]
    [ 0.366071] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.366077] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbc1fffff]
    [ 0.366082] pci 0000:00:1c.0: bridge window [mem 0xbc200000-0xbc3fffff 64bit pref]
    [ 0.366089] pci 0000:00:1c.1: PCI bridge to [bus 12]
    [ 0.366093] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 0.366100] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
    [ 0.366104] pci 0000:00:1c.1: bridge window [mem 0xbc400000-0xbc5fffff 64bit pref]
    [ 0.366112] pci 0000:00:1c.2: PCI bridge to [bus 13]
    [ 0.366116] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
    [ 0.366122] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfbbfffff]
    [ 0.366127] pci 0000:00:1c.2: bridge window [mem 0xd0b00000-0xd14fffff 64bit pref]
    [ 0.366135] pci 0000:00:1c.4: PCI bridge to [bus 15]
    [ 0.366139] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.366145] pci 0000:00:1c.4: bridge window [mem 0xfa800000-0xfb1fffff]
    [ 0.366150] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
    [ 0.366157] pci 0000:00:1e.0: PCI bridge to [bus 20]
    [ 0.366172] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.366174] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.366176] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.366178] pci_bus 0000:00: resource 7 [mem 0xbc000000-0xffffffff]
    [ 0.366180] pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
    [ 0.366182] pci_bus 0000:11: resource 1 [mem 0xbc000000-0xbc1fffff]
    [ 0.366184] pci_bus 0000:11: resource 2 [mem 0xbc200000-0xbc3fffff 64bit pref]
    [ 0.366186] pci_bus 0000:12: resource 0 [io 0x3000-0x3fff]
    [ 0.366188] pci_bus 0000:12: resource 1 [mem 0xfbc00000-0xfbcfffff]
    [ 0.366190] pci_bus 0000:12: resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref]
    [ 0.366192] pci_bus 0000:13: resource 0 [io 0xe000-0xefff]
    [ 0.366194] pci_bus 0000:13: resource 1 [mem 0xfb200000-0xfbbfffff]
    [ 0.366196] pci_bus 0000:13: resource 2 [mem 0xd0b00000-0xd14fffff 64bit pref]
    [ 0.366198] pci_bus 0000:15: resource 0 [io 0xd000-0xdfff]
    [ 0.366200] pci_bus 0000:15: resource 1 [mem 0xfa800000-0xfb1fffff]
    [ 0.366202] pci_bus 0000:15: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
    [ 0.366204] pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7]
    [ 0.366206] pci_bus 0000:20: resource 5 [io 0x0d00-0xffff]
    [ 0.366207] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.366209] pci_bus 0000:20: resource 7 [mem 0xbc000000-0xffffffff]
    [ 0.366212] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
    [ 0.366214] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
    [ 0.366254] NET: Registered protocol family 2
    [ 0.366468] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.366709] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.366902] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.366941] TCP: reno registered
    [ 0.366949] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.366986] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.367076] NET: Registered protocol family 1
    [ 0.367090] pci 0000:00:02.0: Boot video device
    [ 0.613312] PCI: CLS 64 bytes, default 64
    [ 0.613356] Unpacking initramfs...
    [ 0.685162] Freeing initrd memory: 3516K (ffff880037912000 - ffff880037c81000)
    [ 0.685427] Scanning for low memory corruption every 60 seconds
    [ 0.685724] audit: initializing netlink socket (disabled)
    [ 0.685739] type=2000 audit(1392735846.573:1): initialized
    [ 0.697728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.698983] zbud: loaded
    [ 0.699170] VFS: Disk quotas dquot_6.5.2
    [ 0.699211] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.699398] msgmni has been set to 5753
    [ 0.699768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.699834] io scheduler noop registered
    [ 0.699836] io scheduler deadline registered
    [ 0.699865] io scheduler cfq registered (default)
    [ 0.700108] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.700288] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.700460] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.700630] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
    [ 0.700717] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.700804] pciehp: Using ACPI for slot detection.
    [ 0.700872] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 447
    [ 0.700927] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
    [ 0.700934] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.700978] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.700980] vesafb: scrolling: redraw
    [ 0.700982] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.701276] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010800000, using 3072k, total 3072k
    [ 0.827851] Console: switching to colour frame buffer device 128x48
    [ 0.954320] fb0: VESA VGA frame buffer device
    [ 0.954333] intel_idle: MWAIT substates: 0x1120
    [ 0.954334] intel_idle: v0.4 model 0x25
    [ 0.954336] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.954490] GHES: HEST is not enabled!
    [ 0.954559] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.955036] Linux agpgart interface v0.103
    [ 0.955109] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
    [ 0.983471] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.983499] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.983628] mousedev: PS/2 mouse device common for all mice
    [ 0.984635] rtc_cmos 00:02: RTC can wake from S4
    [ 0.984795] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.984828] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    [ 0.984891] drop_monitor: Initializing network drop monitor service
    [ 0.984966] TCP: cubic registered
    [ 0.985061] NET: Registered protocol family 10
    [ 0.985242] NET: Registered protocol family 17
    [ 0.985251] Key type dns_resolver registered
    [ 0.985582] registered taskstats version 1
    [ 0.986258] Magic number: 2:431:83
    [ 0.986415] rtc_cmos 00:02: setting system clock to 2014-02-18 15:04:07 UTC (1392735847)
    [ 0.986464] PM: Checking hibernation image partition /dev/sda6
    [ 1.020768] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.032423] PM: Hibernation image not present or could not be loaded.
    [ 1.033852] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 1.033855] Write protecting the kernel read-only data: 8192k
    [ 1.036680] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
    [ 1.037857] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 1.048632] systemd-udevd[58]: starting version 208
    [ 1.051934] [drm] Initialized drm 1.1.0 20060810
    [ 1.052681] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
    [ 1.052752] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 1.053489] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 1.053683] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    [ 1.054243] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 1.054250] ACPI: Power Button [PWRB]
    [ 1.054309] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 1.056341] ACPI: Lid Switch [LID0]
    [ 1.056390] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    [ 1.056394] ACPI: Sleep Button [SBTN]
    [ 1.056449] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 1.056453] ACPI: Power Button [PWRF]
    [ 1.061806] [drm] Memory usable by graphics device = 2048M
    [ 1.061813] checking generic (c0000000 300000) vs hw (c0000000 10000000)
    [ 1.061816] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 1.061836] Console: switching to colour dummy device 80x25
    [ 1.061989] i915 0000:00:02.0: setting latency timer to 64
    [ 1.088158] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 1.088167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.088168] [drm] Driver supports precise vblank timestamp query.
    [ 1.088247] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.125908] fbcon: inteldrmfb (fb0) is primary device
    [ 1.686801] tsc: Refined TSC clocksource calibration: 2261.000 MHz
    [ 2.030270] Console: switching to colour frame buffer device 170x48
    [ 2.033661] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.033664] i915 0000:00:02.0: registered panic notifier
    [ 2.043083] acpi device:2e: registered as cooling_device0
    [ 2.043220] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.043321] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input6
    [ 2.043365] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.072732] ACPI: bus type USB registered
    [ 2.072789] usbcore: registered new interface driver usbfs
    [ 2.072800] usbcore: registered new interface driver hub
    [ 2.072970] usbcore: registered new device driver usb
    [ 2.073041] SCSI subsystem initialized
    [ 2.075058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.075393] ehci-pci: EHCI PCI platform driver
    [ 2.075595] libata version 3.00 loaded.
    [ 2.075607] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.075628] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.075664] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.075687] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.079676] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.079703] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbd08000
    [ 2.086921] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.087210] hub 1-0:1.0: USB hub found
    [ 2.087224] hub 1-0:1.0: 2 ports detected
    [ 2.087609] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.087620] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.087628] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.087646] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.091655] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.091677] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbd07000
    [ 2.100198] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.100402] hub 2-0:1.0: USB hub found
    [ 2.100413] hub 2-0:1.0: 2 ports detected
    [ 2.100556] ahci 0000:00:1f.2: version 3.0
    [ 2.100724] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
    [ 2.100819] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
    [ 2.100823] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
    [ 2.100828] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.114500] scsi0 : ahci
    [ 2.114680] scsi1 : ahci
    [ 2.114837] scsi2 : ahci
    [ 2.114999] scsi3 : ahci
    [ 2.115160] scsi4 : ahci
    [ 2.115327] scsi5 : ahci
    [ 2.115387] ata1: SATA max UDMA/133 abar m2048@0xfbd06000 port 0xfbd06100 irq 45
    [ 2.115391] ata2: SATA max UDMA/133 abar m2048@0xfbd06000 port 0xfbd06180 irq 45
    [ 2.115393] ata3: DUMMY
    [ 2.115394] ata4: DUMMY
    [ 2.115398] ata5: SATA max UDMA/133 abar m2048@0xfbd06000 port 0xfbd06300 irq 45
    [ 2.115399] ata6: DUMMY
    [ 2.393678] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.433682] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.433781] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.433831] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.434884] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133
    [ 2.434889] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.436127] ata2.00: ATAPI: PLDS DVD+/-RW DS-8A4S, JD12, max UDMA/100
    [ 2.436147] ata1.00: configured for UDMA/133
    [ 2.436450] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 GG2O PQ: 0 ANSI: 5
    [ 2.437560] ata2.00: configured for UDMA/100
    [ 2.443701] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A4S JD12 PQ: 0 ANSI: 5
    [ 2.447926] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.447932] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.448029] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.448032] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.448096] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.455780] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
    [ 2.455783] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.455953] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.517726] hub 1-1:1.0: USB hub found
    [ 2.517904] hub 1-1:1.0: 6 ports detected
    [ 2.539836] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 2.541577] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.623825] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.687279] Switched to clocksource tsc
    [ 2.748052] hub 2-1:1.0: USB hub found
    [ 2.748154] hub 2-1:1.0: 8 ports detected
    [ 2.827208] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
    [ 3.020708] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
    [ 3.111476] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.114205] usbcore: registered new interface driver usbhid
    [ 3.114208] usbhid: USB HID core driver
    [ 3.114758] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input7
    [ 3.114892] hid-generic 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-1.1/input0
    [ 3.177353] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
    [ 3.263497] hub 2-1.6:1.0: USB hub found
    [ 3.263678] hub 2-1.6:1.0: 3 ports detected
    [ 3.530764] usb 2-1.6.1: new full-speed USB device number 5 using ehci-pci
    [ 3.620086] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input8
    [ 3.620222] hid-generic 0003:413C:8161.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0
    [ 3.687480] usb 2-1.6.2: new full-speed USB device number 6 using ehci-pci
    [ 3.777822] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input9
    [ 3.777977] hid-generic 0003:413C:8162.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0
    [ 6.791593] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.770413] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 7.798237] systemd[1]: Set hostname to <MyDellora>.
    [ 8.906388] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 8.906452] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 8.906465] systemd[1]: Starting Login Prompts.
    [ 8.906476] systemd[1]: Reached target Login Prompts.
    [ 8.906483] systemd[1]: Starting Remote File Systems.
    [ 8.906491] systemd[1]: Reached target Remote File Systems.
    [ 8.906499] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 8.906530] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 8.906538] systemd[1]: Starting Delayed Shutdown Socket.
    [ 8.906563] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 8.906571] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 8.906588] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 8.906595] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 8.906618] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 8.906626] systemd[1]: Starting Encrypted Volumes.
    [ 8.906634] systemd[1]: Reached target Encrypted Volumes.
    [ 8.906666] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 8.906771] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 8.906783] systemd[1]: Starting Journal Socket.
    [ 8.906825] systemd[1]: Listening on Journal Socket.
    [ 8.923805] systemd[1]: Starting Load Kernel Modules...
    [ 8.940933] systemd[1]: Starting Apply Kernel Variables...
    [ 8.941260] systemd[1]: Starting Setup Virtual Console...
    [ 8.941566] systemd[1]: Mounting Debug File System...
    [ 8.941964] systemd[1]: Mounting POSIX Message Queue File System...
    [ 8.942263] systemd[1]: Mounting Huge Pages File System...
    [ 8.942663] systemd[1]: Starting Journal Service...
    [ 8.943150] systemd[1]: Started Journal Service.
    [ 9.533948] systemd-journald[128]: Vacuuming done, freed 0 bytes
    [ 10.753314] EXT4-fs (sda7): re-mounted. Opts: (null)
    [ 10.860199] systemd-udevd[161]: starting version 208
    [ 10.978562] systemd-journald[128]: Received request to flush runtime journal from PID 1
    [ 12.670501] ACPI: Requesting acpi_cpufreq
    [ 12.791154] ACPI: AC Adapter [AC] (on-line)
    [ 13.046379] ACPI: Battery Slot [BAT0] (battery present)
    [ 13.075713] thermal LNXTHERM:00: registered as thermal_zone0
    [ 13.075718] ACPI: Thermal Zone [THM] (61 C)
    [ 13.109004] wmi: Mapper loaded
    [ 13.169313] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 13.267456] input: PC Speaker as /devices/platform/pcspkr/input/input10
    [ 13.386188] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
    [ 13.535845] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
    [ 13.668535] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 13.668663] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 13.668776] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 13.669369] mei_me 0000:00:16.0: setting latency timer to 64
    [ 13.669426] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
    [ 13.671461] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 13.671504] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130725/utaddress-251)
    [ 13.671511] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.671513] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130725/utaddress-251)
    [ 13.671517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.671519] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130725/utaddress-251)
    [ 13.671523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.671524] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 13.671562] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 13.671870] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 13.672007] ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMBI 1 (20130725/utaddress-251)
    [ 13.672014] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.726676] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 13.796857] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
    [ 13.804028] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
    [ 13.804444] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
    [ 13.804899] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 13.871967] iTCO_vendor_support: vendor-support=0
    [ 13.912022] input: Dell WMI hotkeys as /devices/virtual/input/input16
    [ 14.205694] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 14.205738] iTCO_wdt: Found a HM57 TCO device (Version=2, TCOBASE=0x0460)
    [ 14.206640] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 14.234179] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
    [ 14.234212] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
    [ 14.234237] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
    [ 14.234286] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
    [ 14.246839] bcma: bus0: Bus registered
    [ 14.434160] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 14.434457] r8169 0000:13:00.0: irq 48 for MSI/MSI-X
    [ 14.434659] r8169 0000:13:00.0 eth0: RTL8102e at 0xffffc900212fe000, a4:ba:db:c8:85:03, XID 04e00000 IRQ 48
    [ 14.725165] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 581785
    [ 14.769986] systemd-udevd[180]: renamed network interface eth0 to enp19s0
    [ 14.800096] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
    [ 14.878089] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    [ 15.153982] cfg80211: Calling CRDA to update world regulatory domain
    [ 15.553384] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
    [ 15.553458] b43: probe of bcma0:0 failed with error -524
    [ 15.553508] Broadcom 43xx driver loaded [ Features: PMNLS ]
    [ 15.951790] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
    [ 15.998636] media: Linux media interface: v0.10
    [ 16.075766] Linux video capture interface: v2.00
    [ 16.159110] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
    [ 16.184262] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 16.184588] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
    [ 16.229297] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input17
    [ 16.229578] usbcore: registered new interface driver uvcvideo
    [ 16.229581] USB Video Class driver (1.1.1)
    [ 16.373654] systemd-udevd[172]: renamed network interface wlan0 to wlp18s0
    [ 18.144304] Adding 2269180k swap on /dev/sda6. Priority:-1 extents:1 across:2269180k FS
    [ 86.950402] fuse init (API version 7.22)
    [ 277.029449] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
    [ 277.467071] NET: Registered protocol family 35
    [ 277.472157] usbcore: registered new interface driver cdc_ether
    [ 277.476281] usbcore: registered new interface driver cdc_phonet
    [ 277.483771] usb 2-1.2: bad CDC descriptors
    [ 277.484376] usbcore: registered new interface driver rndis_host
    [ 277.496455] cdc_acm 2-1.2:1.4: ttyACM0: USB ACM device
    [ 277.498229] usbcore: registered new interface driver cdc_acm
    [ 277.498258] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [ 277.519452] usb 2-1.2: bad CDC descriptors
    [ 277.519767] usbcore: registered new interface driver rndis_wlan
    [ 288.768279] PPP generic driver version 2.4.2
    [ 293.996611] PPP BSD Compression module registered
    [ 294.129600] PPP Deflate Compression module registered
    here is the critical chain output
    systemd-analyze critical-chain
    The time after the unit is active or started is printed after the "@" character.
    The time the unit takes to start is printed after the "+" character.
    graphical.target @15.633s
    └─multi-user.target @15.633s
    └─dkms.service @11.596s +4.037s
    └─basic.target @11.593s
    └─timers.target @11.592s
    └─systemd-tmpfiles-clean.timer @11.545s
    └─sysinit.target @11.543s
    └─swap.target @11.494s
    └─dev-disk-by\x2duuid-6ff023ec\x2d720b\x2d4c7a\x2d87ff\x2ddf5224b2
    └─system.slice @2.016s
    └─-.slice @2.015s
    lines 1-14/14 (END)...skipping...
    The time after the unit is active or started is printed after the "@" character.
    The time the unit takes to start is printed after the "+" character.
    graphical.target @15.633s
    └─multi-user.target @15.633s
    └─dkms.service @11.596s +4.037s
    └─basic.target @11.593s
    └─timers.target @11.592s
    └─systemd-tmpfiles-clean.timer @11.545s
    └─sysinit.target @11.543s
    └─swap.target @11.494s
    └─dev-disk-by\x2duuid-6ff023ec\x2d720b\x2d4c7a\x2d87ff\x2ddf5224b293c3.swap @10.524s +41ms
    └─system.slice @2.016s
    └─-.slice @2.015s
    Last edited by Dinesh raja (2014-02-18 14:06:46)

  • [SOLVED] Arch Linux Boot from USB fails while loading kernel

    I am attempting to get arch linux booting off my usb. I use cfdisk to create a /dev/sdb1 partition then use mkfs.ext4 /dev/sdb1, mount the usb, pacstrap it, use install-syslinux_update -iam, generate fstab and then attempt to boot from it.
    The boot extracts the kernel but then complains that DEVICE is missing in the option APPEND root=DEVICE (in syslinux.cfg). I looked in /dev/disk (on the temporary filesystem shell), it showed my ssd and cd drive but not the usb. Does anyone know what could be causing the USB to not load in that particular section of the kernel?
    Last edited by afree10 (2013-12-11 14:28:14)

    afree10 wrote:
    Due to my situation I have to type the file in from scratch so I will only type uncommented lines:
    MODULES=""
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
    I will reboot and get that lsmod output.
    Since you'll probably want to boot from different computers (portable USB system), you want to remove 'autodetect' from that line. This is the same as always booting the initramfs-linux-fallback.img image. To save some space, you could remove 'autodetect' from the configuration file, disable the fallback image in /etc/mkinitcpio.d/linux.preset  and delete initramfs-linux.img (otherwise, you'll get two identical images).
    Of course, run mkinitcpio -P when you're done.

  • Installing Arch Linux from Arch Linux .

    Is there a form to  install the base system from Arch Linux? I have Arch Linux I686 and a partition with free space. Maybe in a virtual box and then copying to the partition?

    i put X84_64 in /etc/pacman.conf and pacstrap dowload the correct x86_64 files BUT. When the programs are installing pacman calls execv and there is a arch imcopatibility see:
    # mnt pacstrap -i /mnt base base-devel
    ==> Creating install root at /mnt
    ==> Installing packages to /mnt
    :: Sincronizando las bases de datos de paquetes...
    core 105,4 KiB 30,5K/s 00:03 [#####################################################################] 100%
    extra 1440,5 KiB 199K/s 00:07 [#####################################################################] 100%
    community 1885,8 KiB 153K/s 00:12 [#####################################################################] 100%
    :: Hay 52 miembros en el grupo base:
    :: Repositorio core
    1) bash 2) bzip2 3) coreutils 4) cronie 5) cryptsetup 6) device-mapper 7) dhcpcd 8) diffutils 9) e2fsprogs 10) file 11) filesystem 12) findutils 13) gawk 14) gcc-libs
    15) gettext 16) glibc 17) grep 18) gzip 19) heirloom-mailx 20) inetutils 21) iproute2 22) iputils 23) jfsutils 24) less 25) licenses 26) linux 27) logrotate 28) lvm2
    29) man-db 30) man-pages 31) mdadm 32) nano 33) netcfg 34) pacman 35) pciutils 36) pcmciautils 37) perl 38) ppp 39) procps-ng 40) psmisc 41) reiserfsprogs 42) sed 43) shadow
    44) sysfsutils 45) systemd-sysvcompat 46) tar 47) texinfo 48) usbutils 49) util-linux 50) vi 51) which 52) xfsprogs
    Introduzca una selección (por defecto=todos):
    :: Hay 14 miembros en el grupo base-devel:
    :: Repositorio core
    1) autoconf 2) automake 3) binutils 4) bison 5) fakeroot 6) flex 7) gawk 8) gcc 9) gettext 10) libtool 11) m4 12) make 13) patch 14) pkg-config
    Introduzca una selección (por defecto=todos):
    atención: saltando el objetivo: gawk
    atención: saltando el objetivo: gettext
    resolviendo dependencias...
    atención: bucle de dependencias detectado:
    atención: filesystem será instalado antes que su dependencia systemd
    verificando conflictos...
    Objetivos (129): acl-2.2.51-2 archlinux-keyring-20130114-1 attr-2.4.46-2 ca-certificates-20121105-1 cloog-0.18.0-1 cracklib-2.8.19-1 curl-7.28.1-1 db-5.3.21-1 dbus-1.6.8-6
    dirmngr-1.1.0-4 expat-2.1.0-1 gdbm-1.10-1 glib2-2.34.3-1 gmp-5.1.0-1 gnupg-2.0.19-3 gpgme-1.3.1-4 groff-1.21-2 hwids-20121203-1 iana-etc-2.30-3 iptables-1.4.16.3-1
    isl-0.11.1-1 kbd-1.15.5-3 keyutils-1.5.5-3 kmod-12-1 krb5-1.11-2 libarchive-3.0.4-2 libassuan-2.0.3-1 libcap-2.22-3 libffi-3.0.11-1 libgcrypt-1.5.0-3
    libgpg-error-1.10-2 libgssglue-0.4-1 libksba-1.2.0-2 libldap-2.4.33-3 libltdl-2.4.2-7 libmpc-1.0.1-1 libnl-3.2.11-1 libpcap-1.3.0-1 libpipeline-1.2.2-1
    libsasl-2.1.23-9 libssh2-1.4.3-1 libtirpc-0.2.2-4 libusbx-1.0.14-1 linux-api-headers-3.7.1-1 linux-firmware-20121118-1 mkinitcpio-0.12.0-2 mkinitcpio-busybox-1.20.2-1
    mpfr-3.1.1.p2-2 ncurses-5.9-3 openssl-1.0.1.c-1 pacman-mirrorlist-20121128-1 pam-1.1.6-1 pambase-20130113-1 pcre-8.32-1 pinentry-0.8.2-1 popt-1.16-5 ppl-1.0-1
    pth-2.0.7-4 readline-6.2.004-1 run-parts-4.3.4-1 systemd-197-4 sysvinit-tools-2.88-9 tzdata-2012j-1 xz-5.0.4-1 zlib-1.2.7-1 autoconf-2.69-1 automake-1.13.1-1
    bash-4.2.042-1 binutils-2.23.1-3 bison-2.7-1 bzip2-1.0.6-4 coreutils-8.20-1 cronie-1.4.9-2 cryptsetup-1.5.1-1 device-mapper-2.02.98-1 dhcpcd-5.6.4-1 diffutils-3.2-1
    e2fsprogs-1.42.6-1 fakeroot-1.18.4-1 file-5.11-1 filesystem-2012.12-1 findutils-4.4.2-4 flex-2.5.37-1 gawk-4.0.2-1 gcc-4.7.2-3 gcc-libs-4.7.2-3 gettext-0.18.2-1
    glibc-2.17-1 grep-2.14-1 gzip-1.5-1 heirloom-mailx-12.5-3 inetutils-1.9.1-4 iproute2-3.6.0-2 iputils-20121221-1 jfsutils-1.1.15-3 less-451-1 libtool-2.4.2-7
    licenses-2.9-1 linux-3.7.3-1 logrotate-3.8.2-2 lvm2-2.02.98-1 m4-1.4.16-2 make-3.82-5 man-db-2.6.3-1 man-pages-3.45-1 mdadm-3.2.6-1 nano-2.2.6-2 netcfg-3.0-1
    pacman-4.0.3-5 patch-2.7.1-2 pciutils-3.1.10-1 pcmciautils-018-6 perl-5.16.2-2 pkg-config-0.27.1-1 ppp-2.4.5-5 procps-ng-3.3.5-1 psmisc-22.19-1
    reiserfsprogs-3.6.21-4 sed-4.2.2-1 shadow-4.1.5.1-3 sysfsutils-2.1.0-8 systemd-sysvcompat-197-4 tar-1.26-2 texinfo-4.13a-7 usbutils-006-1 util-linux-2.22.2-1
    vi-1:050325-3 which-2.20-5 xfsprogs-3.1.10-1
    Tamaño de descarga: 153,97 MiB
    Tamaño instalado: 579,04 MiB
    ¿Continuar con la instalación? [S/n] s
    :: Descargando paquetes desde core...
    linux-api-headers-3.7.1-1-x86_64 614,4 KiB 81,1K/s 00:08 [#####################################################################] 100%
    tzdata-2012j-1-any 140,1 KiB 63,7K/s 00:02 [#####################################################################] 100%
    glibc-2.17-1-x86_64 7,9 MiB 87,0K/s 01:33 [#####################################################################] 100%
    ncurses-5.9-3-x86_64 946,6 KiB 153K/s 00:06 [#####################################################################] 100%
    readline-6.2.004-1-x86_64 295,0 KiB 72,2K/s 00:04 [#####################################################################] 100%
    bash-4.2.042-1-x86_64 788,4 KiB 165K/s 00:05 [#####################################################################] 100%
    bzip2-1.0.6-4-x86_64 54,7 KiB 29,6K/s 00:02 [#####################################################################] 100%
    gcc-libs-4.7.2-3-x86_64 767,2 KiB 79,2K/s 00:10 [#####################################################################] 100%
    db-5.3.21-1-x86_64 1139,3 KiB 134K/s 00:09 [#####################################################################] 100%
    zlib-1.2.7-1-x86_64 77,3 KiB 41,4K/s 00:02 [#####################################################################] 100%
    cracklib-2.8.19-1-x86_64 239,1 KiB 47,4K/s 00:05 [#####################################################################] 100%
    libgssglue-0.4-1-x86_64 29,4 KiB 23,8K/s 00:01 [#####################################################################] 100%
    libtirpc-0.2.2-4-x86_64 168,8 KiB 68,7K/s 00:02 [#####################################################################] 100%
    pambase-20130113-1-any 1032,0 B 567K/s 00:00 [#####################################################################] 100%
    pam-1.1.6-1-x86_64 632,5 KiB 62,1K/s 00:10 [#####################################################################] 100%
    attr-2.4.46-2-x86_64 64,2 KiB 41,1K/s 00:02 [#####################################################################] 100%
    acl-2.2.51-2-x86_64 124,8 KiB 64,0K/s 00:02 [#####################################################################] 100%
    gmp-5.1.0-1-x86_64 441,0 KiB 81,2K/s 00:05 [#####################################################################] 100%
    libcap-2.22-3-x86_64 33,9 KiB 27,5K/s 00:01 [#####################################################################] 100%
    coreutils-8.20-1-x86_64 2,0 MiB 92,0K/s 00:22 [#####################################################################] 100%
    run-parts-4.3.4-1-x86_64 19,2 KiB 23,0K/s 00:01 [#####################################################################] 100%
    cronie-1.4.9-2-x86_64 58,6 KiB 39,0K/s 00:02 [#####################################################################] 100%
    libgpg-error-1.10-2-x86_64 48,0 KiB 37,8K/s 00:01 [#####################################################################] 100%
    libgcrypt-1.5.0-3-x86_64 303,2 KiB 59,4K/s 00:05 [#####################################################################] 100%
    shadow-4.1.5.1-3-x86_64 1030,6 KiB 90,0K/s 00:11 [#####################################################################] 100%
    util-linux-2.22.2-1-x86_64 1566,2 KiB 67,2K/s 00:23 [#####################################################################] 100%
    expat-2.1.0-1-x86_64 101,4 KiB 33,0K/s 00:03 [#####################################################################] 100%
    iana-etc-2.30-3-any 319,8 KiB 52,6K/s 00:06 [#####################################################################] 100%
    filesystem-2012.12-1-any 6,0 KiB 19,7K/s 00:00 [#####################################################################] 100%
    dbus-1.6.8-6-x86_64 416,0 KiB 49,0K/s 00:08 [#####################################################################] 100%
    pcre-8.32-1-x86_64 970,1 KiB 138K/s 00:07 [#####################################################################] 100%
    libffi-3.0.11-1-x86_64 33,7 KiB 29,9K/s 00:01 [#####################################################################] 100%
    glib2-2.34.3-1-x86_64 1904,6 KiB 50,8K/s 00:38 [#####################################################################] 100%
    kbd-1.15.5-3-x86_64 1025,0 KiB 59,1K/s 00:17 [#####################################################################] 100%
    kmod-12-1-x86_64 92,4 KiB 53,5K/s 00:02 [#####################################################################] 100%
    hwids-20121203-1-any 281,1 KiB 32,4K/s 00:09 [#####################################################################] 100%
    xz-5.0.4-1-x86_64 217,9 KiB 44,1K/s 00:05 [#####################################################################] 100%
    systemd-197-4-x86_64 1788,3 KiB 61,7K/s 00:29 [#####################################################################] 100%
    device-mapper-2.02.98-1-x86_64 155,8 KiB 59,9K/s 00:03 [#####################################################################] 100%
    popt-1.16-5-x86_64 59,3 KiB 24,9K/s 00:02 [#####################################################################] 100%
    cryptsetup-1.5.1-1-x86_64 158,4 KiB 39,0K/s 00:04 [#####################################################################] 100%
    dhcpcd-5.6.4-1-x86_64 74,7 KiB 37,8K/s 00:02 [#####################################################################] 100%
    diffutils-3.2-1-x86_64 217,9 KiB 56,7K/s 00:04 [#####################################################################] 100%
    e2fsprogs-1.42.6-1-x86_64 694,9 KiB 61,4K/s 00:11 [#####################################################################] 100%
    file-5.11-1-x86_64 200,7 KiB 83,5K/s 00:02 [#####################################################################] 100%
    findutils-4.4.2-4-x86_64 368,8 KiB 56,8K/s 00:06 [#####################################################################] 100%
    gawk-4.0.2-1-x86_64 798,3 KiB 68,2K/s 00:12 [#####################################################################] 100%
    gettext-0.18.2-1-x86_64 2,1 MiB 128K/s 00:16 [#####################################################################] 100%
    grep-2.14-1-x86_64 194,2 KiB 52,4K/s 00:04 [#####################################################################] 100%
    gzip-1.5-1-x86_64 75,2 KiB 49,2K/s 00:02 [#####################################################################] 100%
    gdbm-1.10-1-x86_64 81,4 KiB 20,2K/s 00:04 [#####################################################################] 100%
    perl-5.16.2-2-x86_64 12,4 MiB 145K/s 01:28 [#####################################################################] 100%
    openssl-1.0.1.c-1-x86_64 2,5 MiB 64,1K/s 00:40 [#####################################################################] 100%
    libsasl-2.1.23-9-x86_64 115,5 KiB 34,8K/s 00:03 [#####################################################################] 100%
    libldap-2.4.33-3-x86_64 375,1 KiB 33,4K/s 00:11 [#####################################################################] 100%
    keyutils-1.5.5-3-x86_64 55,0 KiB 28,7K/s 00:02 [#####################################################################] 100%
    krb5-1.11-2-x86_64 1063,4 KiB 39,8K/s 00:27 [#####################################################################] 100%
    heirloom-mailx-12.5-3-x86_64 205,3 KiB 29,9K/s 00:07 [#####################################################################] 100%
    inetutils-1.9.1-4-x86_64 244,2 KiB 43,3K/s 00:06 [#####################################################################] 100%
    iptables-1.4.16.3-1-x86_64 243,0 KiB 57,0K/s 00:04 [#####################################################################] 100%
    iproute2-3.6.0-2-x86_64 426,4 KiB 34,8K/s 00:12 [#####################################################################] 100%
    sysfsutils-2.1.0-8-x86_64 28,9 KiB 20,7K/s 00:01 [#####################################################################] 100%
    iputils-20121221-1-x86_64 71,4 KiB 37,2K/s 00:02 [#####################################################################] 100%
    jfsutils-1.1.15-3-x86_64 165,8 KiB 59,5K/s 00:03 [#####################################################################] 100%
    less-451-1-x86_64 88,6 KiB 21,6K/s 00:04 [#####################################################################] 100%
    licenses-2.9-1-any 59,4 KiB 29,0K/s 00:02 [#####################################################################] 100%
    linux-firmware-20121118-1-any 15,7 MiB 102K/s 02:37 [#####################################################################] 100%
    mkinitcpio-busybox-1.20.2-1-x86_64 163,5 KiB 44,0K/s 00:04 [#####################################################################] 100%
    libarchive-3.0.4-2-x86_64 533,0 KiB 121K/s 00:04 [#####################################################################] 100%
    mkinitcpio-0.12.0-2-any 30,6 KiB 27,7K/s 00:01 [#####################################################################] 100%
    linux-3.7.3-1-x86_64 43,9 MiB 72,3K/s 10:22 [#####################################################################] 100%
    logrotate-3.8.2-2-x86_64 29,7 KiB 24,1K/s 00:01 [#####################################################################] 100%
    lvm2-2.02.98-1-x86_64 635,5 KiB 49,3K/s 00:13 [#####################################################################] 100%
    texinfo-4.13a-7-x86_64 673,3 KiB 52,1K/s 00:13 [#####################################################################] 100%
    groff-1.21-2-x86_64 1633,4 KiB 68,4K/s 00:24 [#####################################################################] 100%
    libpipeline-1.2.2-1-x86_64 33,1 KiB 16,2K/s 00:02 [#####################################################################] 100%
    man-db-2.6.3-1-x86_64 348,1 KiB 68,6K/s 00:05 [#####################################################################] 100%
    ^[[6~ man-pages-3.45-1-any 4,1 MiB 54,7K/s 00:06 [###############################################################------] man-pages-3.45-1-any 4,4 MiB 58,4K/s 01:18 [#####################################################################] 100%
    mdadm-3.2.6-1-x86_64 271,8 KiB 68,8K/s 00:04 [#####################################################################] 100%
    nano-2.2.6-2-x86_64 300,0 KiB 25,2K/s 00:12 [#####################################################################] 100%
    netcfg-3.0-1-any 29,6 KiB 20,7K/s 00:01 [#####################################################################] 100%
    sed-4.2.2-1-x86_64 119,3 KiB 28,8K/s 00:04 [#####################################################################] 100%
    ca-certificates-20121105-1-any 134,1 KiB 25,9K/s 00:05 [#####################################################################] 100%
    libssh2-1.4.3-1-x86_64 186,0 KiB 35,8K/s 00:05 [#####################################################################] 100%
    curl-7.28.1-1-x86_64 505,7 KiB 23,8K/s 00:21 [#####################################################################] 100%
    pth-2.0.7-4-x86_64 75,9 KiB 46,2K/s 00:02 [#####################################################################] 100%
    libksba-1.2.0-2-x86_64 109,9 KiB 30,7K/s 00:04 [#####################################################################] 100%
    libassuan-2.0.3-1-x86_64 76,5 KiB 39,1K/s 00:02 [#####################################################################] 100%
    pinentry-0.8.2-1-x86_64 95,3 KiB 36,7K/s 00:03 [#####################################################################] 100%
    dirmngr-1.1.0-4-x86_64 163,9 KiB 38,9K/s 00:04 [#####################################################################] 100%
    gnupg-2.0.19-3-x86_64 1450,2 KiB 61,8K/s 00:23 [#####################################################################] 100%
    gpgme-1.3.1-4-x86_64 207,9 KiB 51,9K/s 00:04 [#####################################################################] 100%
    pacman-mirrorlist-20121128-1-any 2,3 KiB 2,14M/s 00:00 [#####################################################################] 100%
    archlinux-keyring-20130114-1-any 344,0 KiB 61,6K/s 00:06 [#####################################################################] 100%
    pacman-4.0.3-5-x86_64 508,1 KiB 81,1K/s 00:06 [#####################################################################] 100%
    pciutils-3.1.10-1-x86_64 81,2 KiB 21,9K/s 00:04 [#####################################################################] 100%
    pcmciautils-018-6-x86_64 18,9 KiB 20,4K/s 00:01 [#####################################################################] 100%
    libnl-3.2.11-1-x86_64 197,9 KiB 44,6K/s 00:04 [#####################################################################] 100%
    libusbx-1.0.14-1-x86_64 40,1 KiB 20,3K/s 00:02 [#####################################################################] 100%
    libpcap-1.3.0-1-x86_64 193,0 KiB 34,2K/s 00:06 [#####################################################################] 100%
    ppp-2.4.5-5-x86_64 270,3 KiB 54,5K/s 00:05 [#####################################################################] 100%
    procps-ng-3.3.5-1-x86_64 213,5 KiB 40,8K/s 00:05 [#####################################################################] 100%
    psmisc-22.19-1-x86_64 84,6 KiB 35,6K/s 00:02 [#####################################################################] 100%
    reiserfsprogs-3.6.21-4-x86_64 210,4 KiB 17,4K/s 00:12 [#####################################################################] 100%
    sysvinit-tools-2.88-9-x86_64 26,1 KiB 22,5K/s 00:01 [#####################################################################] 100%
    systemd-sysvcompat-197-4-x86_64 5,3 KiB 16,6K/s 00:00 [#####################################################################] 100%
    tar-1.26-2-x86_64 560,2 KiB 121K/s 00:05 [#####################################################################] 100%
    usbutils-006-1-x86_64 51,9 KiB 27,4K/s 00:02 [#####################################################################] 100%
    vi-1:050325-3-x86_64 141,4 KiB 44,6K/s 00:03 [#####################################################################] 100%
    which-2.20-5-x86_64 13,8 KiB 22,2K/s 00:01 [#####################################################################] 100%
    xfsprogs-3.1.10-1-x86_64 615,1 KiB 54,9K/s 00:11 [#####################################################################] 100%
    m4-1.4.16-2-x86_64 162,4 KiB 39,8K/s 00:04 [#####################################################################] 100%
    autoconf-2.69-1-any 580,6 KiB 45,7K/s 00:13 [#####################################################################] 100%
    automake-1.13.1-1-any 565,1 KiB 54,6K/s 00:10 [#####################################################################] 100%
    binutils-2.23.1-3-x86_64 3,5 MiB 55,5K/s 01:04 [#####################################################################] 100%
    bison-2.7-1-x86_64 460,7 KiB 57,6K/s 00:08 [#####################################################################] 100%
    fakeroot-1.18.4-1-x86_64 53,4 KiB 34,7K/s 00:02 [#####################################################################] 100%
    flex-2.5.37-1-x86_64 783,7 KiB 76,5K/s 00:10 [#####################################################################] 100%
    mpfr-3.1.1.p2-2-x86_64 340,1 KiB 60,4K/s 00:06 [#####################################################################] 100%
    libmpc-1.0.1-1-x86_64 75,7 KiB 47,8K/s 00:02 [#####################################################################] 100%
    isl-0.11.1-1-x86_64 618,0 KiB 51,9K/s 00:12 [#####################################################################] 100%
    cloog-0.18.0-1-x86_64 95,0 KiB 51,2K/s 00:02 [#####################################################################] 100%
    ppl-1.0-1-x86_64 3,0 MiB 57,8K/s 00:54 [#####################################################################] 100%
    gcc-4.7.2-3-x86_64 18,5 MiB 62,7K/s 05:01 [#####################################################################] 100%
    libltdl-2.4.2-7-x86_64 150,2 KiB 68,8K/s 00:02 [#####################################################################] 100%
    libtool-2.4.2-7-x86_64 268,1 KiB 40,1K/s 00:07 [#####################################################################] 100%
    make-3.82-5-x86_64 349,3 KiB 73,7K/s 00:05 [#####################################################################] 100%
    patch-2.7.1-2-x86_64 72,9 KiB 14,8K/s 00:05 [#####################################################################] 100%
    pkg-config-0.27.1-1-x86_64 29,6 KiB 24,0K/s 00:01 [#####################################################################] 100%
    (129/129) verificando la integridad de los paquetes [#####################################################################] 100%
    (129/129) cargando los archivos del paquete... [#####################################################################] 100%
    (129/129) verificando conflictos entre archivos [#####################################################################] 100%
    (129/129) verificando el espacio disponible en disco [#####################################################################] 100%
    ( 1/129) instalando linux-api-headers [#####################################################################] 100%
    ( 2/129) instalando tzdata [#####################################################################] 100%
    ( 3/129) instalando glibc [#####################################################################] 100%
    ( 4/129) instalando ncurses [#####################################################################] 100%
    ( 5/129) instalando readline [#####################################################################] 100%
    ( 6/129) instalando bash [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 7/129) instalando bzip2 [#####################################################################] 100%
    ( 8/129) instalando gcc-libs [#####################################################################] 100%
    ( 9/129) instalando db [#####################################################################] 100%
    ( 10/129) instalando zlib [#####################################################################] 100%
    ( 11/129) instalando cracklib [#####################################################################] 100%
    ( 12/129) instalando libgssglue [#####################################################################] 100%
    ( 13/129) instalando libtirpc [#####################################################################] 100%
    ( 14/129) instalando pambase [#####################################################################] 100%
    ( 15/129) instalando pam [#####################################################################] 100%
    ( 16/129) instalando attr [#####################################################################] 100%
    ( 17/129) instalando acl [#####################################################################] 100%
    ( 18/129) instalando gmp [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 19/129) instalando libcap [#####################################################################] 100%
    ( 20/129) instalando coreutils [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 21/129) instalando run-parts [#####################################################################] 100%
    ( 22/129) instalando cronie [#####################################################################] 100%
    Dependencias opcionales para cronie
    pm-utils: defer anacron on battery power
    smtp-server: send job output via email
    smtp-forwarder: forward job output to email server
    ( 23/129) instalando libgpg-error [#####################################################################] 100%
    ( 24/129) instalando libgcrypt [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 25/129) instalando shadow [#####################################################################] 100%
    ( 26/129) instalando util-linux [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 27/129) instalando expat [#####################################################################] 100%
    ( 28/129) instalando iana-etc [#####################################################################] 100%
    ( 29/129) instalando filesystem [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 30/129) instalando dbus [#####################################################################] 100%
    Dependencias opcionales para dbus
    libx11: dbus-launch support
    ( 31/129) instalando pcre [#####################################################################] 100%
    ( 32/129) instalando libffi [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 33/129) instalando glib2 [#####################################################################] 100%
    Dependencias opcionales para glib2
    python2: for gdbus-codegen
    ( 34/129) instalando kbd [#####################################################################] 100%
    ( 35/129) instalando kmod [#####################################################################] 100%
    ( 36/129) instalando hwids [#####################################################################] 100%
    ( 37/129) instalando xz [#####################################################################] 100%
    ( 38/129) instalando systemd [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    Dependencias opcionales para systemd
    cryptsetup: required for encrypted block devices
    libmicrohttpd: systemd-journal-gatewayd
    quota-tools: kernel-level quota management
    python: systemd library bindings
    python2-cairo: systemd-analyze
    python2-gobject: systemd-analyze
    systemd-sysvcompat: symlink package to provide sysvinit binaries
    ( 39/129) instalando device-mapper [#####################################################################] 100%
    ( 40/129) instalando popt [#####################################################################] 100%
    ( 41/129) instalando cryptsetup [#####################################################################] 100%
    ( 42/129) instalando dhcpcd [#####################################################################] 100%
    ( 43/129) instalando diffutils [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 44/129) instalando e2fsprogs [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 45/129) instalando file [#####################################################################] 100%
    ( 46/129) instalando findutils [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 47/129) instalando gawk [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 48/129) instalando gettext [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    Dependencias opcionales para gettext
    cvs: for autopoint tool
    ( 49/129) instalando grep [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 50/129) instalando gzip [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 51/129) instalando gdbm [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 52/129) instalando perl [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 53/129) instalando openssl [#####################################################################] 100%
    Dependencias opcionales para openssl
    ca-certificates
    ( 54/129) instalando libsasl [#####################################################################] 100%
    ( 55/129) instalando libldap [#####################################################################] 100%
    ( 56/129) instalando keyutils [#####################################################################] 100%
    ( 57/129) instalando krb5 [#####################################################################] 100%
    ( 58/129) instalando heirloom-mailx [#####################################################################] 100%
    Dependencias opcionales para heirloom-mailx
    smtp-forwarder: for sending mail
    ( 59/129) instalando inetutils [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 60/129) instalando iptables [#####################################################################] 100%
    ( 61/129) instalando iproute2 [#####################################################################] 100%
    Dependencias opcionales para iproute2
    linux-atm: ATM support
    ( 62/129) instalando sysfsutils [#####################################################################] 100%
    ( 63/129) instalando iputils [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    Dependencias opcionales para iputils
    xinetd: for tftpd
    ( 64/129) instalando jfsutils [#####################################################################] 100%
    ( 65/129) instalando less [#####################################################################] 100%
    ( 66/129) instalando licenses [#####################################################################] 100%
    ( 67/129) instalando linux-firmware [#####################################################################] 100%
    ( 68/129) instalando mkinitcpio-busybox [#####################################################################] 100%
    ( 69/129) instalando libarchive [#####################################################################] 100%
    ( 70/129) instalando mkinitcpio [#####################################################################] 100%
    Dependencias opcionales para mkinitcpio
    xz: Use lzma or xz compression for the initramfs image
    bzip2: Use bzip2 compression for the initramfs image
    lzop: Use lzo compression for the initramfs image
    mkinitcpio-nfs-utils: Support for root filesystem on NFS
    ( 71/129) instalando linux [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    Dependencias opcionales para linux
    crda: to set the correct wireless channels of your country
    ( 72/129) instalando logrotate [#####################################################################] 100%
    Dependencias opcionales para logrotate
    cron: scheduled log rotation
    ( 73/129) instalando lvm2 [#####################################################################] 100%
    ( 74/129) instalando texinfo [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 75/129) instalando groff [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    Dependencias opcionales para groff
    netpbm: for use together with man -H command interaction in browsers
    psutils: for use together with man -H command interaction in browsers
    ( 76/129) instalando libpipeline [#####################################################################] 100%
    ( 77/129) instalando man-db [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    Dependencias opcionales para man-db
    less
    gzip
    ( 78/129) instalando man-pages [#####################################################################] 100%
    ( 79/129) instalando mdadm [#####################################################################] 100%
    ( 80/129) instalando nano [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 81/129) instalando netcfg [#####################################################################] 100%
    Dependencias opcionales para netcfg
    dialog: for the menu based profile and wifi selectors
    wpa_supplicant: for wireless networking support
    ifplugd: for automatic wired connections through net-auto-wired
    wpa_actiond: for automatic wireless connections through net-auto-wireless
    wireless_tools: for interface renaming through net-rename
    ifenslave: for bond connections
    bridge-utils: for bridge connections
    ( 82/129) instalando sed [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 83/129) instalando ca-certificates [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 84/129) instalando libssh2 [#####################################################################] 100%
    ( 85/129) instalando curl [#####################################################################] 100%
    ( 86/129) instalando pth [#####################################################################] 100%
    ( 87/129) instalando libksba [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 88/129) instalando libassuan [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 89/129) instalando pinentry [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    Dependencias opcionales para pinentry
    gtk2: for gtk2 backend
    qt: for qt4 backend
    ( 90/129) instalando dirmngr [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 91/129) instalando gnupg [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    Dependencias opcionales para gnupg
    curl: gpg2keys_curl
    libldap: gpg2keys_ldap
    libusb-compat: scdaemon
    ( 92/129) instalando gpgme [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 93/129) instalando pacman-mirrorlist [#####################################################################] 100%
    ( 94/129) instalando archlinux-keyring [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    ( 95/129) instalando pacman [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    Dependencias opcionales para pacman
    fakeroot: for makepkg usage as normal user
    ( 96/129) instalando pciutils [#####################################################################] 100%
    ( 97/129) instalando pcmciautils [#####################################################################] 100%
    ( 98/129) instalando libnl [#####################################################################] 100%
    ( 99/129) instalando libusbx [#####################################################################] 100%
    (100/129) instalando libpcap [#####################################################################] 100%
    (101/129) instalando ppp [#####################################################################] 100%
    (102/129) instalando procps-ng [#####################################################################] 100%
    (103/129) instalando psmisc [#####################################################################] 100%
    (104/129) instalando reiserfsprogs [#####################################################################] 100%
    (105/129) instalando sysvinit-tools [#####################################################################] 100%
    (106/129) instalando systemd-sysvcompat [#####################################################################] 100%
    (107/129) instalando tar [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (108/129) instalando usbutils [#####################################################################] 100%
    Dependencias opcionales para usbutils
    python2: for lsusb.py usage
    coreutils: for lsusb.py usage
    (109/129) instalando vi [#####################################################################] 100%
    Dependencias opcionales para vi
    heirloom-mailx: used by the preserve command for notification
    (110/129) instalando which [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (111/129) instalando xfsprogs [#####################################################################] 100%
    (112/129) instalando m4 [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (113/129) instalando autoconf [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (114/129) instalando automake [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (115/129) instalando binutils [#####################################################################] 100%
    (116/129) instalando bison [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (117/129) instalando fakeroot [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (118/129) instalando flex [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (119/129) instalando mpfr [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (120/129) instalando libmpc [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (121/129) instalando isl [#####################################################################] 100%
    (122/129) instalando cloog [#####################################################################] 100%
    (123/129) instalando ppl [#####################################################################] 100%
    (124/129) instalando gcc [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (125/129) instalando libltdl [#####################################################################] 100%
    (126/129) instalando libtool [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (127/129) instalando make [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse
    (128/129) instalando patch [#####################################################################] 100%
    Dependencias opcionales para patch
    ed: for patch -e functionality
    (129/129) instalando pkg-config [#####################################################################] 100%
    llamada a execv fallida (Formato de ejecutable incorrecto)
    error: el comando falló al ejecutarse

  • [SOLVED] Install Arch Linux on USB Stick!

    So, here is the deal. I want to install Arch Linux on a USB Stick so I can plug it at any computer and have my system... with me
    I've had a little bit experience with Arch so I know a few things about it... used it for a few months before on a real system.
    My USB stick is a HighSpeed 17-20 MBPS and it's 16 GB capacity.
    So how do I do it?
    Last edited by 1lj4z1 (2012-04-05 07:25:53)

    I'm using occasionally Arch installed on HDD-USB, I've just added usb hook to mkinitcpio.conf and removed autodetect (more modules=more hardware supported). So far it worked on 3 different computers (all of them have one main HDD so no grub issues, but it's no biggie if it doesn't boot right away, you can always edit grub on-the-fly by pressing "e")
    About USB stick: installing on USB stick is not the same as running it in LIVE mode! Consider yourself warned.
    If you just install it you really should read about SSD optimizations because USB flash cells also have limited read/write cycles (actually is less robust and sophisticated than SSD). Something to look at: noatime mount option, disable swap if not necessary, profile-sync-daemon and so on...
    1lj4z1 wrote:Well I don't need to chroot, i am running it live. I'll see about mkinitcpio.conf but I can't understand what you mean rebuilding initramfs? What is that exactcly?
    It means if you fiddle with mkinitcpio you should run:
    # mkinitcpio -p linux
    afterwards or bad things will happen
    Last edited by masteryod (2012-03-27 15:37:13)

  • Arch linux installed on LVM won't boot

    My hard disk has only 1 partition.
    I created 1 volume group and 1 logical volume on it.
    my fstab looks like this:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    tmpfs /tmp tmpfs nodev,nosuid 0 0
    # UUID=7e4cc742-0eda-4a69-8357-4b769cd51520
    /dev/mapper/vg000-lv000 / ext4 rw,relatime,data=ordered 0 2
    I configured /etc/mkinitcpio.conf as following and ran mkinitcpio -p linux again:
    MODULES="dm_mod"
    HOOKS="base udev usb lvm2 filesystems"
    After installation, I rebooted the system, selected the 1st entry in grub menu, the screen shows:
    Loading Linux core repo kernel ...
    Loading initial ramdisk ...
    then the following errors occured:
    ERROR:device '/dev/mapper/vg000-lv000' not found. Skipping fsck.
    ERROR:Unable to find root device 'dev/mapper/vg000-lv000'
    Could anybody please help?
    PS: I then rebooted to arch-linux using cd, I noticed that /dev/mapper/vg000-lv000 was not there. I had to use vgchange -ay vg000 to make it appear. Could this be related to the ERRORS?
    Last edited by whudwl (2012-11-23 08:14:47)

    Is your hard disk attached via usb?  If not, you did not have the proper modules for the intramfs to access the hard disk itself.  You had it set up so that it could boot from a usb device, but not an internal device.  You should have read the comments for each of those examples.  It explains pretty cearly what each example would be used for.
    Edit: I use lvm and my mkinitcpio.conf HOOKS line looks like this:
    HOOKS="base udev autodetect sata lvm2 filesystems fsck timestamp"
    My SSD's are connected via SATA III, the lvm2 hook is obvious, the filesystems load the ext4 module (all filesystems are ext4), fsck adds fsck and fsck.ext4, timestamp makes 'systemd-analyze' able to tell you how long it takes the initramfs and kernel to load individually instead of together.  base should always be there, and first (unless you really really know what you are doing), udev adds... udev, and autodetect tries its best to strip everything you don't need for your particular system.
    For info on a paritcular hook, use the -H option with mkinitcpio. (ie. 'mkinipcio -H lvm2').  There is also a fantasticlly informative wiki page about mkinitcpio.
    Last edited by WonderWoofy (2012-11-26 03:44:40)

Maybe you are looking for

  • No result  when I submit in background job a Z transaction

    Hi, I design a screen with the screen painters for my Z report instead of using SELECTION-SCREEN command to build my screen of selection. In the PAI process, I launch the same report in backgound with JOB_OPEN,SUBMIT, JOB_CLOSE and nothing happens. I

  • Do I need a RAID system or just a larger external hard drive

    Hi guys... I am working in my fathers company and running the media side of our small business. I do our website, print media and also our video production.... I have an iMac and it is running on 500gig of storage and 8meg of RAM.... I have almost fi

  • All elements flow (remotely) when you update a page. What shall I do?

    I will try to document exactly what I am trying to complete in Muse. I have a single master upon which all pages have been built and until now without any problems. I am running v1.1, Build 960, CL768344 - AIR Runtime 3.2.0.2060. On my fron page I ha

  • Java currently not working, but was working previously. Change occurs around updates.

    I need Java to upload info to a GoDaddy website. Java was working in January, then did not work. It worked again after an update, then stopped working about the time of another Firefox update. Currently, Java is not working, but I am able to upload t

  • Print preview while getting otf data

    hi experts, can somebody tell me how to get the print preview of sap script while getting the otf data. I have set the ITCPO-TDGETOTF = 'X' option in OPEN FORM but when i give it its not showing the output. How can  I see output ?