Is anyone interested in a VI library for the 1-Wire TMEX API ?

After scouring the interwebz and this forum and finding no real solution, I'm am building a library of VIs to interface with a 1-Wire network. I have several of the pieces built and tested to the point where I can search a network and retrieve the serial number (ROM code) for all devices attached. Before I go much further, I would like to get some comments, advice, hints, and general feedback about the VIs as they are and how to move forward with this project. Is there still any interest in this?
This code is for a (likely) one time project and may never be used again. However, if it can be done correctly and may be of use to anyone else in the future, I would prefer to put in the effort rather than just hack something together.
One of my primary concerns regarding the code, besides general architecture, is the handling of errors and some situations which are not actually errors. This has always been a thorn in my side when building programs in LabVIEW.
This project is targeted for use with the DS9490 USB adapter and is written in LabVIEW 8.0. If anyone has any interest, I'd be glad to here from you.
Attachments:
1-Wire.zip ‏206 KB

Similar Messages

After update to 10.9.4, it is not possible to use my iphoto library for the screen saver

after the update to 10.9.4, it is not possible anymore to choose a folder in my iphoto library for the screen saver

Problem solved after the third! reboot!

I am a residential appraiser and recently purchased an ipad4 to use for my home inspections. Some homes are foreclose without power and I am unable to get a good picture without a flash. Does anyone know of a flash attachment for the ipad4?

I am a residential appraiser and recently purchased an ipad 4 to use for my home inspections. Some homes are foreclosed poperties without power and I am unable to get a good interior picture without a flash. Does anyone know of a flash attachment for the ipad 4? I found a flash attachment for the ipad 2, but it does not work with the ipad 4.

I'm sorry to hear that.
I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago. I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all. I can go weeks between syncs.
Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist. Add another playlist ("walk" or "workout") and add different podcasts to that one.
Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff). Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for. It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.

Does anyone know if Photoshop Elements 9 for the Mac is compatible with Mavericks?

Does anyone know if Photoshop Elements 9 for the Mac is compatible with Mavericks?

Yes, but it is absolutely critical to delete all existing preferences after upgrading to 10.9.
I'm running PSE 6, 8, 9, 10, 11, and 12 in 10.9. PSE 11 has a slight problem (with a couple of filters) but otherwise it all works.

I am aware that the iPod Touch 5g has no official date yet, on the site it only says: Available to ship: October. But, does anyone know what a possible, date for the iPod to be released? :)

I am aware that the iPod Touch 5g has no official date yet, on the site it only says: Available to ship: October. But, does anyone know what a possible, date for the iPod to be released? :)

Well, I recently checked apple.com, and the "pre-order" button has been replaced with the "buy now" button. This is a very good sign that the iPods will begin to ship soon! There is still no exact date, but I expect that they will ship within the next 3 days. You should get an email when they have shipped.
Take care!
-59Ballons

Preparing my photo library for the beta Photos is taking the better part of a week. Is this normal?

The process of "preparing" my photo library for the beta Photos is taking the better part of a week. Is this normal? I have around 2000 photos the iPhoto library I am uploading.

How are you preparing the library? The only thing I would do to prepare for converting to Photos once it's released would be the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #1, Repair Permissions.
3 - run Option #4, Rebuild Database.
Do this just prior to launching Photos for the first time.

Has anyone created a NI-VXI driver for the Ardence RTX operating system?

Has anyone created a NI-VXI driver for the Ardence RTX operating system?
a VXI instrument through a PCI-VXI-8335 card (in the PC) talking to a PCI-VXI-8345 card (in the VXI chassis) via MXI-3, Has anyone created a PCI-VXI-8335 card driver for the Ardence RTX operating system?

Now i want develop driver on RTX,my hard platform is similiar(PCI8335+VXI8340+1418A),and after i read the PCI baseaddress,i find PCI8335 only has memory-map,so that means if i want to driver this board ,so i take following steps list below:
1.use Rtmapmemory() to map the baseaddress to virtual address
2.using memset() or memcpy() to driver the 1418A board
is this right?
if you can give me some hints,thanks
or you can contact me :[email protected]

Anyone have any pros vs. cons for the nano vs touch?

Anyone have any pros vs. cons for the nano vs touch?

If you need internet/want and apps you need a touch.
The Nano is smaller, less expoensive and has a FM radio.

Does anyone know of any security protection for the IPad?

Does anyone know of a security protection for the IPad?

Yes, first get a good case for it to protect it from the elements, dropping, etc.
Next, be sure to set up your free Find My iPad application for it in case it is lost or stolen.
When carrying it around with you keep your eye on it at all times and beware of letting others walk away with it. They are very popular and stolen frequently.
P.S. There are no iOS viruses, malware, etc. so no antivirus, antispyware, etc. apps are available.

Can anyone recommend a compatible 3G card for the Satellite P10

Can anyone recommend a compatible 3G card for the Satellite P10?
I previously tried to use a vodafone gprs card which the machine would not work with.
thanks

Hi
Do you want to buy an 3G/GPRS WLan PC card?
Such cards use the PCMCIA port and should work on most notebooks which provide such PCMCIA slot.
I think you will find many cards if you will googel in the internet.
Check it and

ANSI C shipping examples for the NI-DAQmx C API are installed

ANSI C shipping examples for the NI-DAQmx C API are installed as part of the language support and are available under Program Files\National Instruments\NI-DAQ\Examples\DAQmx ANSI C.
I can not locate the examples
I did install the software and
Program Files\National Instruments\NI-DAQ\ does exist but no examples

Hi asterof,
I am not sure exactly which examples you are referring to in the ANSI C directory (dsp,dsw), but I believe that all of the examples were written in Visual C++ 6. Along with the C code, each example contains a Visual C++ 6 Project file and a Visual C++ 6 Workspace file.
Keep me posted if you have additional questions.
Message Edited by Jordan D on 04-16-2008 12:52 PM
Best regards,
Jordan D
Applications Engineering
National Instruments

I have an iPod classic that syncs my entire library, I'd like to buy a smaller iPod, a nano maybe for the gym. Can I use the same library or do I need to set up a new library for the 2nd iPod? Is that possible? I mean for one to have 2 iTune librarys?

I have an iPod classic that syncs my entire library, I'd like to buy a smaller iPod, maybe a Nano for the gym. Would I need a 2nd iTunes library? Is that possibly, I mean for one person to have 2 iTune librarys/accounts?

Woodblock 3 wrote:
Would I need a 2nd iTunes library? Is that possibly, I mean for one person to have 2 iTune librarys/accounts?
In other words, no. You don't need another iTunes Library for your new iPod
Another iTunes Library, that's only if someone elses music is mixed in with yours and you want to create another Windows user account with their music in it.
The iTunes Library is the master vault containing all your content, from there you create playlists or smart playlists specially tailored for the smaller iPod's storage requirements.
For instance if the iPod can hold only 2,000 songs, then you create a smart playlist based upon those rules/limitation. Plus what type of music you like.
You have a incredible degree of control with smart playlists, they update automatically so you only set the conditions for what goes into them. Including content from other created playlists and smart playlists.
Then, when you hook up the smaller iPod, it has it's own sync options, "all of your music and playlists" or "only select playlists" So you use the second option to select just the smart playlist you tailored for the new iPod.
When you hook up the iPod Classic, only it's sync options are used, not the new iPod ones.
I hope I explained it better this time.

I TUNES CONTENT DISSAPEARED BY CREATION OF A SECOND I TUNES LIBRARY FOR THE I PHONE 4 OF MY DAD. I TRIED TO CREATE A SECOND LIBRARY THAT I HAVE NOW BUT MY ITUNES LIBRARY FULL OF MUSIC, PICTURES AND APPS DISSAPEARED AND I DON'T FIND HIM BACK WHAT DID I DO

Hello
I have a big problem.
The all content of my itunes library dissapeared when i created a second library for my dad's iphone.
Now i have a library on his name that is empty and i lost the all content of my own library that was full of music, apps, pictures, ...
What can i do to solve this problem. I hope i can repair this problem.
Can somebody please help me very quickly.
Thanks a lot
Krystal from Belgium

Hello
I have a big problem.
The all content of my itunes library dissapeared when i created a second library for my dad's iphone.
Now i have a library on his name that is empty and i lost the all content of my own library that was full of music, apps, pictures, ...
What can i do to solve this problem. I hope i can repair this problem.
Can somebody please help me very quickly.
Thanks a lot
Krystal from Belgium

Does anyone know what protection Apple has for the virus that is supposed to shut us out of the internet on Monday?

Does anyone know what protectio Apple has for this virus that is supposed to shut us out of the internet on Monday?

There was a security patch made available a few months ago. So, if you're up to date, you're fine. Here's a link to check whether or not you have any problems with that:
http://www.dns-ok.us
If the site is green, you're OK.
The actual virus attack happened a year ago,but the FBI hasput up servers to keep people on the internet, until now.
http://www.nbcphiladelphia.com/news/tech/DNS-Changer-Virus-Could-Keep-Thousands- Off-Internet-161442515.html

Anyone have a Multi Instrument setup for the MO6?

I just got a MO6 workstation to integrate into my studio
setup. I was wondering if anyone has this keyboard
(or the MO8) and has a Multi instrument for it setup
in the enviroment. I am trying to not have to input
all the names of all 16 instrument banks. I tried
doing an Google and forum search with no luck.
The thing is impressive sound wise and will be
easier to edit with the free software available.
Only wish Apple would get their support online.
Yamaha did thier end with the remote control
feature. I can put it into Remote control with
one touch and start controlling Logic from the
keyboard. Every button has a dual role, one for
the workstation and one for Logic. Very cool feature.
Thanks in advance, Phil
http://static.flickr.com/67/160620209_6397f36fd1.jpg?v=0

Sorry, I only have the original Motif 6 environment,
but I wanted to ask you how you like the MO6?
Have you used the original Motif at all? I'm thinking
about saving up to get a MO8 because of the weighted
keys, and having the ES sounds only helps.
Thanks for posting,
I have not used the original Motif at all but am loving the MO6!
I am primarily a guitar player but since getting this board my inner
keyboard self is coming out. Sound On Sound has a review of
the MO6 in Junes issue. I recieved my copy a week after purchasing
the MO6 and was glad to see their positive review.
I would recommend the MO8 for the tone generator alone and as SOS put it,
you got to love that arpegiator! Everything else to me is icing.
I will have to check out the Motifator web site. That is probably my best
chance at getting the enviroment for the MO6. Thanks again for taking
the time to post.

Is anyone interested in a VI library for the 1-Wire TMEX API ?

Similar Messages

Maybe you are looking for