Is BO XI 3.1 FP 2.2 good to install to resolve report hung issues.

Is BO XI 3.1 FP 2.2 good to install or have any issues with FP 2.2.
- Do any one have any issues with Fp 2.2 ,please let me know, we are going to install Fp 2.2 to resolve the issue (long running report`s hung`s even a 10minutes reports,show the processing bar and then they continue running forever and don't show data at all.),
We are in BO XI 3.1 SP2
Reports work fine in single server environment. have the issue in clustered environemnt, as per below note SAP suggested to install FP 2.2
1375766 - Refreshing a Web Intelligence document causes high CPU usage and longer refresh times
Symptom
Create a new Webi Document and run it. This takes around 60 seconds to bring back the data
Click the Refresh button to refresh the data
The document either takes much longer to return the same data or does not return at all
WIReportServer.exe consumes 100% CPU (on multi-processor boxes, this 100% cpu would be divided by the # of CPUs)
Reproducing the Issue
1) Create a new Web Intelligence Document from within InfoView
2) Run this document so that your data is returned. Note how long this takes.
3) Click the Refresh button from the Web Intelligence Report Panel
4) At this point the document may either:
Take a very long time to return (in comparison to the initial run)
Never return
Cause a spike in CPU resources
Cause
Thee is a known issue within the BusinessObjects Enterprise XI Release 3.1 product. This issue is logged under ADAPT01245312
Resolution
This is a known issue and is tracked under ADAPT01245312
This is resolved in the following Fix Packs
Fix Pack 1.9+
Fix Pack 2.2+
Thanks
Raju

you can uninstall XI r2 in 2 ways
1) goto control panel and add/remove programs and select XI r2 then unistall
2) if you have the XI R2 install s/w, click the exe, after couple of screens, it should take you a screen where you see new install, repair and uninstall. click uninstall.
XI r2 and XI 3.1 will be installed in separate folders. not sure if they share any common dlls. before you do this, take a back up.

Similar Messages

A problem with Threads and MMapi

I am tring to execute a class based on Game canvas.
The problem begin when I try to Play both a MIDI tone and to run an infinit Thread loop.
The MIDI tone "Stammers".
How to over come the problem?
Thanks in advance
Kobi
See Code example below:
import java.io.IOException;
import java.io.InputStream;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
import javax.microedition.lcdui.game.GameCanvas;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
public class MainScreenCanvas extends GameCanvas implements Runnable {
     private MainMIDlet parent;
     private boolean mTrucking = false;
     Image imgBackgound = null;
     int imgBackgoundX = 0, imgBackgoundY = 0;
     Player player;
     public MainScreenCanvas(MainMIDlet parent)
          super(true);
          this.parent = parent;
          try
               imgBackgound = Image.createImage("/images/area03_bkg0.png");
               imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
               imgBackgoundY = this.getHeight() - imgBackgound.getHeight();
          catch(Exception e)
               System.out.println(e.getMessage());
      * starts thread
     public void start()
          mTrucking = true;
          Thread t = new Thread(this);
          t.start();
      * stops thread
     public void stop()
          mTrucking = false;
     public void play()
          try
               InputStream is = getClass().getResourceAsStream("/sounds/scale.mid");
               player = Manager.createPlayer(is, "audio/midi");
               player.setLoopCount(-1);
               player.prefetch();
               player.start();
          catch(Exception e)
               System.out.println(e.getMessage());
     public void run()
          Graphics g = getGraphics();
          play();
          while (true)
               tick();
               input();
               render(g);
      * responsible for object movements
     private void tick()
      * response to key input
     private void input()
          int keyStates = getKeyStates();
          if ((keyStates & LEFT_PRESSED) != 0)
               imgBackgoundX++;
               if (imgBackgoundX > 0)
                    imgBackgoundX = 0;
          if ((keyStates & RIGHT_PRESSED) != 0)
               imgBackgoundX--;
               if (imgBackgoundX < this.getWidth() - imgBackgound.getWidth())
                    imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
      * Responsible for the drawing
      * @param g
     private void render(Graphics g)
          g.drawImage(imgBackgound, imgBackgoundX, imgBackgoundY, Graphics.TOP | Graphics.LEFT);
          this.flushGraphics();
}

You can also try to provide a greater Priority to your player thread so that it gains the CPU time when ever it needs it and don't harm the playback.
However a loop in a Thread and that to an infinite loop is one kind of very bad programming, 'cuz the loop eats up most of your CPU time which in turn adds up more delays of the execution of other tasks (just as in your case it is the playback). By witting codes bit efficiently and planning out the architectural execution flow of the app before start writing the code helps solve these kind of issues.
You can go through [this simple tutorial|http://oreilly.com/catalog/expjava/excerpt/index.html] about Basics of Java and Threads to know more about threads.
Regds,
SD
N.B. And yes there are more articles and tutorials available but much of them targets the Java SE / EE, but if you want to read them here is [another great one straight from SUN|http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html] .
Edited by: find_suvro@SDN on 7 Nov, 2008 12:00 PM

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

Problem with threads, program always crash

new to threads, may be doing something COMPLETELY wrong. When I run the program I get a couple of NullPointerExceptions in Thread-0 and Thread-1. I'm confused because it screws up when I call size() for arrayList, and in the API size doesn't throw anything.
public class ProducerConsumerRunner
   public static void main(String args[])
      Queue q = new Queue(QUEUE_MAX_SIZE);
      ProducerRunnable producer = new ProducerRunnable(q, ITERATIONS);
      ConsumerRunnable consumer = new ConsumerRunnable(q, ITERATIONS);
      //works good up to here
      Thread t1 = new Thread(producer);
      Thread t2 = new Thread(consumer);
      t1.start();
      t2.start();
   private static int ITERATIONS = 50;
   private static int QUEUE_MAX_SIZE = 25;
import java.util.ArrayList;
import java.util.concurrent.locks.ReentrantLock;
public class Queue {
     public Queue(int maxSize)
          list = new ReentrantLock();
          underLimit = list.newCondition();
          MAX_SIZE = maxSize;
     public void add(String line)
          list.lock();
          try{
                       System.out.println("add method of Queue");
               while(record.size() >= MAX_SIZE){//things get screwed up when this condition is evaluated
                    //size method is crashing the program
                    System.out.println("2");
                    underLimit.await();
                    System.out.println("3");
               record.add(line);
          }catch(java.lang.InterruptedException e){
               System.out.println("await interupted: "+e.getMessage());
          }finally{
               list.unlock();
     public void remove(int line)
          list.lock();
          record.remove(line);
          list.unlock();
     public ArrayList<String> record;
     private final ReentrantLock list;
     private final java.util.concurrent.locks.Condition underLimit;
     private final int MAX_SIZE;
import java.util.Date;
public class ProducerRunnable implements Runnable{
     public ProducerRunnable(Queue q, int itterations)
          this.q = q;
          ITTERATIONS = itterations;
     public void run()
          String date;
          for(int i = 0; i<ITTERATIONS; i++)
               date = new Date().toString();
               q.add(date);//this is where it screws up
               System.out.println(date+" added");
               try{
               Thread.sleep(100);
               }catch(java.lang.InterruptedException e){
                    System.out.println("ProduccerRunnable's sleep was interupted");
     private final Queue q;
     private final int ITTERATIONS;
public class ConsumerRunnable implements Runnable{
     public ConsumerRunnable(Queue q, int itterations)
          this.q = q;
          ITTERATIONS = itterations;
     public void run()
          //Queue q = new Queue();
          int length;
          for(int i = 0; i<ITTERATIONS; i++)
               length = q.record.size();//things are getting screwed up here
               while(q.record.get(length) == null)
                    length--;
               System.out.println((String)q.record.get(length));
               q.remove(length);
               try{
               Thread.sleep(100);
               }catch(java.lang.InterruptedException e){
                    System.out.println("ConsumerRunnable's sleep was interupted");
     private final Queue q;
     private final int ITTERATIONS;
}

question:
this works right
     public void remove()
          list.lock();
          int line = 0;
          try{
               *while(record.size() < 1)*
                    range.await();
               record.remove(line);
               range.signalAll();
          }catch(java.lang.InterruptedException e){
               System.out.println("await interupted: "+e.getMessage());
          }finally{
               list.unlock();
     }this is deadlock
*int list = 0;*
*while((list = record.size)<1) was screwing things up because of the assignment*record is ArrayList of strings. when better to use Vector instead of ArrayList? i notice no differnce and i use threads
initially I thought record.size was being evaluated and before could be assigned to list, time slice ran out. this could not be case because I use ReentrantLock (list) to lock it.
Edited by: bean-planet on Apr 1, 2009 4:31 PM

Problem with threads hanging

We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start   (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?

Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy

Default Encrypted Password

Dear All,
i want to insert encrypted Password of 'password' string into table user_dtl column PASSWORD .
How can i insert Encripted password into table.
Thanks

Hi Vedant,
See the CUSTOM_HASH function that is installed with sample application in the APEX.
Here is the code for it:
create or replace function custom_hash (p_username in varchar2, p_password in varchar2)
return varchar2
is
l_password varchar2(4000);
l_salt varchar2(4000) := 'XFSPL28ZTWEWWM6FHWMK68AG5NQVLU';
begin
-- This function should be wrapped, as the hash algorithm is exposed here.
-- You can change the value of l_salt or the method of which to call the
-- DBMS_OBFUSCATOIN toolkit, but you much reset all of your passwords
-- if you choose to do this.
l_password := utl_raw.cast_to_raw(dbms_obfuscation_toolkit.md5
(input_string => p_password || substr(l_salt,10,13) || p_username ||
substr(l_salt, 4,10)));
return l_password;
end;
i want to insert encrypted Password of 'password' string into table user_dtl column PASSWORD.The above function will give the encrypted password which can be inserted into USER_DTL as follows:
INSERT INTO USER_DTL(USERNAME,PASSWORD) VALUES(:P1_USERNAME, CUSTOM_HASH(:P1_USERNAME,:P1_PASSWORD))Be sure that PASSWORD column in USER_DTL is of type VARCHAR2 and of adequate length as to accommodate the encrypted password.
Hope it helps!
Regards,
Kiran

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

Jabber Options - Phone Accounts - Voicemail -- "Spinning Wheel"

Been trying to resolve a nagging issue.   We currently have CUCM 8.6.2-20000-2, CUPS 8.6.4-10000-28 and just put up Unity Conn 9.1. Jabber Win clients are 9.2(1).   Several people have not been able to integrate voicemail into the Jabber client.
We are totally MS AD integrated.   In CUPS, I had Applications -> Cisco Jabber -> Settiings Credentials Used For Voicemail service set to CUPS so the user would not need to supply credentials. To help me debug, I went and changed this setting to "Not Set" so that the Phone Accounts option appears in Jabber 4 Win client.
So far all the people who do not work access the Phone Accounts setting in the Jabber client see the "Spinning Wheel".   They can't see the fields to enter their AD creds and the voicemail server.   Reinstall of the client does not seem to help. There seemed to be a bug that described this but I think it was fixed in 9.1(2). You can't display the Bug description because it contains proprietary info.
I have attached a screen shot of my Jabber Client Phone Account -- when I enter the credentials, I log in fine.
Anyone seen this or know how to fix?
TIA --- Perry

Well, I had TAC look at this issue. Short story is that it was an issue with one of the *many* local cache files which hid the real source of the problem. I actually had the Mailstore misconfgured in CUPS. I used the Exchange server's CAS IP instead of Unity Connection.   We created new Mailstore definition that used the Unity Conn IP's, created a new Voicemail Profile and associated the user to that profile.   She worked....
I deleted my all my Jabber for Windows local cache files and I then received the "spining wheel" issue. I moved my ID to the new Voicemail Profile with correct Mailstore and I could connect fine.   TAC spent an hour pouring through files on my PC and could not find the reason why my ID was working.   TAC indicates that in 9.x, a lot of this configuration moves to CUCM and hopefully cuts down on these issues! PRT files from the Jabber client really did not assist them in locating the problem.
Hope this helps....

Collaborate on Excel workbooks with Sharepoint Foundation

My company recently implemented SharePoint Foundation 2013 and our shared Excel workbooks are no longer allowing multiple users to collaborate at the same time. We have verified that all the settings and permissions are correct and that checking in and
checking out is not required. Is this something that is not available with SharePoint Foundation? We are using Office 2013 installed on the clients, not Office online. Thank you.

Co-authoring of Excel workbooks is only supported when all the editors are using the Excel web application, not the Excel client application.
From
Microsoft's overview of co-authoring in SharePoint 2013:
>"Co-authoring is easy to use from the end user’s point of view. When a user wants to work on a document in Word 2013, PowerPoint 2013, OneNote 2013, Visio 2013 or one of the Office Web Apps, he or she merely opens it from SharePoint 2013 or SharePoint
Online, as usual. If another user already has the document open, both users can edit the document at the same time.
One exception to this is that users can co-author in Excel Web App only if everyone uses the Excel Web App to access the workbook. If anyone uses Excel 2013 or Excel 2010 (the client application)
to access the workbook, co-authoring in Excel Web App will be disabled for that workbook while it is open in the client application."
>"The Excel 2013 client application does not support co-authoring workbooks in SharePoint 2013 or SharePoint Online. But, the Excel client application uses the Shared Workbook feature to support non-real-time co-authoring workbooks that are stored
locally or on network (UNC) paths."

Previewing loops

Have had no luck with PCs trying to do music recoding so I swithced over to Mac because I heard it so easy, seamless, and problem free. Now, on opening Garageband for the first time and trying to preview loops I get an error mesage that says: "the software instrument or apple loop selected is currently being installed. You have already initiated the installation of additional content for Garageband via Software update. For additional information please open the software update application." I have opened this application and nothing. I have now spent about two hours trying to fix this problem. Should I "convert back to PC, take this load of crap back to the store or is there something simple I am missing?

I have found if you wait long enough, you will hear the file begin to play. Sometimes the delay can several seconds. Not acceptable IMO.

Pension issue Mid Month Leaving

Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
Ashwani

Dear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis              01/2010                    0.00           8,750.00
/139 VPF Basis              01/2010                    0.00           8,750.00
/3F1 Ee PF contribution     01/2010                    0.00           1,050.00
/3F3 Er PF contribution     01/2010                    0.00             509.00
/3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00
/3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25
/3FA PF basis for Ee contri 01/2010                    0.00           8,750.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3F4 Er Pension contributio 01/2010                    0.00             541.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
1BAS Basic Salary           01/2010                    0.00           8,750.00
RT table for year 2009. DOL 27.10.2009
                                                                                /111 EPF Basis              07/2009                    0.00           9,016.13
/139 VPF Basis              07/2009                    0.00           9,016.13
/3F1 Ee PF contribution     07/2009                    0.00           1,082.00
/3F3 Er PF contribution     07/2009                    0.00             628.00
/3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
/3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
/3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FC Pension Basis for Er c 07/2009                    0.00           5,452.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13
1BAS Basic Salary           07/2009                    0.00           9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani

Three movies I bought from iTunes this morning do not show up on the 1st Gen AppleTV.

I understand some file formats are not compatible with AppleTV (1st gen) but these films were purchased directly from iTunes. One would assume they are formatted properly to work on Apple equipment, yes? Previously purchased movies show up on the AppleTV just fine, so I'm not sure what's going with these three. They were from the $4.99 Sci Fi collection: Enemy Mine, Dune and Terminator 2. Oldies but goodies. The iMac, where the iTunes Library lives is used to stream the content to the AppleTV, and everything that is in my Library appears to be available for streaming, except these three films. Any advice?

I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
Unbelievable.

AIO Remote

Can you tell me why I can use HP e-print on my Ipad but my C4385 is not compatible with AIO remote. My Ipad has no problem finding and printing on my C4385 using HP e-print. However AIO can not find my printer. Every other scan and print app that I have tested has no problem finding my C4385. How is it that this HP software can't find one of its Owen. The printer is connected through the same network as my Ipad.
Thanks !

Hi Florami,
Welcome to the HP Support forums. I understand that the HP All-in-One Printer Remote app is not scanning from your Photosmart C4385 printer.
I have included a document about which printers support the various HP Cloud services. Your printer is not a supported printer for the AiO app.
HP Web-Connected Printers and Supported Cloud Services
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Not work tablet UI on Prestigio 5080 PRO tablet

I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Installation problem on 5800

Hi,
I cant seem to install anything on my 5800XpressMusic for a sudden, it keep saying "Unable to perfom the operation, another operation is in progress" when I try to install any application, I dont have any other progress in use, why does it keep saying that when I dont!?
I do have the latest software installed.
Thank you in advance for your help
Solved!
Go to Solution.

remove the memory card and restart the phone and try again
if it still exists, so backup your phone and soft reset your phone *#7370# and try again
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Downloads to wrong folder

Hello,
When I sync music or podcasts onto my ipod nano (4th generation 16 GB) from my powerbook (OS X 10.4.11) using itunes (9.0.2) it appears, on the summary page of itunes, to be downloading into the correct blue audio folder however once the ipod is ejected no music or podcasts can be found. Once reconnected and on the summary page of itunes, the downloaded files appear to be in the incorrect orange 'other' file.
I have reset and restored the ipod several times. I tried to run disk utilities and got the following message: "Repairing disk failed with error Could not unmount disk"
Can anyone help me? Please?

A simple solution found after many many hours of painstaking troubleshooting:
the problem seemed to be with itunes
trash itunes from the application folder
re-download itunes from apple website
restore ipod in itunes menu
after doing the above I was able to successfully download music again! Previous attempts to restore the ipod failed to solve the problem probably because of an issue with my itunes software.
I hope this saves other people all the time that I lost in the process!

Is BO XI 3.1 FP 2.2 good to install to resolve report hung issues.

Similar Messages

Maybe you are looking for