Is creation of only one transport req(Customizing or WorkBench) possible

Hi,
In Urgent Correction when the correction is set into development the transport request is created. The system creates 2 transport requests: Customizing and workbench. Is there any possible way in which i can determine which sort of transport request gets created (either customizing or workbench). I want that only one type of transport request should be created.
Regards,
Kriti Bhalla.

well I did as I wrote. Just in case anybody needs it, this is how I add new messages that will be processed later by BPEM background job
1. Calling FM BAL_LOG_CREATE
2. Calling FM EMMA_LOG_PROCESS_START
3. Adding messages with FM BAL_LOG_MSG_ADD
4. Calling FM EMMA_LOG_PROCESS_END
5. Calling FM BAL_DB_SAVE  (not sure if really needed)
if you need to add messages for different objects within one BPEM Job just repeat points 2 - 5 for each object.
Best Regards
Marcin

Similar Messages

  • Need Inspection lot creation at only one storage location level - QA07

    Hi,
    I have shelf life expired material at different storage location. When ever i run QA07.System generates inspection lot for all storage location.But I want to process the inspection lot for only one storage location. Please guide me how can we map this reqmnt.
    Thanks in advance for your relevent response.
    Thanks & Regards
    Kundan Kumar

    Hi,
    Next inspection date is maintained at the batch level, not at the storage location level.
    You can suggest the following solutions if it is feasible in your business scenario.
    Scenario 1: Batch is inwarded in one storage location"A" & stored for some time, then it is transfered to other storage loactions B & C (like production storage locations).
    In this case suggest to transfer the batch to storage loactions B & C just one or two days before the actual consumption of the batch & also keep the opening period  in QA07 sufficient days (between 10-15 days), so that the sytem will create the inspection lot in one storage location "A" . Since the batch is still not transfered to B & C, the system will not create inspection lots in B&C.
    Scenario 2: Batch is inwarded in all the storage locations with the same batch number.
    In this case suggest to inward the same bacth with different batch numbers, keeping the all other characteristic values same
    With Best Regards
    Vithal

  • Creation of only one queue

    Hi, I am using a queue in one of my subvi, I don't when to put the structure that used the queue in a while loop because I need information that is inside in other subvi. The problem I have is that my queue is created more then once if I don't place it in a while loop. I was wondering what structure should I place the initialisation of my queue in?
    Thanks

    Hello.
    Best choice to get help: post your vi.
    In the meanwhile, try this solution. It can work to create the queue only once.
    Cheers
    Alipio
    "Qod natura non dat, Salmantica non praestat"
    Attachments:
    createqueue.jpg ‏23 KB

  • Radiobuttons: More than one block and only one RB group. Is it possible?

    Hi experts!
    Mi requirement needs to have 5 different radiobuttons in 3 different SELECTION-SCREEN block. But the point is that they need that RB needs to belong to the same radiobutton's group. Is this possible to do when I define parameters or I have to manage them by program?
    Thanks and regards.

    Dear,
    It is possible.
    Please go through the example of live program.
    SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN : SKIP.
    PARAMETERS :  P1 RADIOBUTTON GROUP G1 DEFAULT 'X' .
    SELECTION-SCREEN : SKIP.
    PARAMETERS :  P2 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN : SKIP.
    PARAMETERS :  P3 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN : SKIP.
    PARAMETERS :  P4 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN : SKIP.
    PARAMETERS :  P5 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN : SKIP.
    PARAMETERS :  P6 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN : SKIP.
    PARAMETERS :  P7 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN : SKIP.
    PARAMETERS :  P8 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN : END OF BLOCK B1.
    IF P1 = 'X'.
      SUBMIT ZSD_INVOICE_DETAIL VIA SELECTION-SCREEN AND RETURN.
    ELSEIF P2 = 'X'.
      SUBMIT ZSD_SERVICE_COMM_BDC VIA SELECTION-SCREEN AND RETURN.
    ELSEIF P3 = 'X'.
      SUBMIT ZSD_INSPIRA_UPLOAD VIA SELECTION-SCREEN AND RETURN.
    ELSEIF P4 = 'X'.
      SUBMIT ZSD_SERVICE_COMM_PAYOUT VIA SELECTION-SCREEN AND RETURN.
    ELSEIF P5 = 'X'.
      SUBMIT ZSD_SERVICE_COMM_PAYOUT_BDC VIA SELECTION-SCREEN AND RETURN.
    ELSEIF P6 = 'X'.
      SUBMIT ZSD_SERVICE_COMM_CANC_BDC VIA SELECTION-SCREEN AND RETURN.
    ELSEIF P7 = 'X'.
      SUBMIT ZSD_SERVICE_COMM_REVR_BDC VIA SELECTION-SCREEN AND RETURN.
    ELSEIF P8 = 'X'.
      SUBMIT ZBDC_F02_PAYOUT_50 VIA SELECTION-SCREEN AND RETURN.
    ENDIF.
    Regds,
    Anil

  • Can there be more than one transport targets for a business system in sld

    Hi All,
    I have a question about transport targets in sld for sap xi 3.0 sp19.
    We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
    I know that there can be more than one source for a business system where more than one  different business systems have the same business system as the target.
    I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
    Please help .
    Thanks,
    Padmaja

    Hello,
    I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
    As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
    Regards,
    Mark

  • More than one Plant in Customer Material record

    In Customer Material Info record I want a option of more than one plant. Right now I can enter only one plant in customer material info record. What can I do to have a option of more than one plant in customer material info record.
    Regards,
    Kumar

    hello, friend.
    as i understand, you would want options for more than one plant (to choose from) and not to restrict the number of choices.
    for practical reasons, you can only enter 1 (standard) plant in the customer-material info record.  nevertheless, you can enter a different plant in the customer master, and another plant in the material master.
    when you process the sales order, you can change the plant to any other choices, even those not included in the customer-material or customer master data, as long as these plant choices and your customer are assigned the same distribution channel.  of course, your material should also be extended to these plants.
    i hope this helped, even if a little.
    regards.
    jty

  • Load relationships from only one BP,  from R/3 to CRM

    Hello,
    I have downloaded one BP from R/3 to CRM, but relationships (Employee responsible, Sales representative, Ship-to party, etc...) are not downloaded into this BP.
    The individual employees, ship-to party, etc... already exist in CRM, but not appear as relationships into mentioned BP.
    I created request with:
    Adapter Object: CUSTOMER_REL
    Objektklass:      BUPA
    Table Name         KNVP                  
    Field Name         KUNNR                 
    Incl/Excl          I Inclusive defined set
    Option             EQ Equality (= Low)   
    Low                'The R/3 customer number'
    But when I start request this is downloading all relationships for all customers.
    What I need add to the request or what I need to do in order to download only the relationships for only one specific BP (customer) ?
    Regards
    Juan

    This is the request we run:
    Request Name       REQ_CUST_REL                                                                               
    Table Name         <b>KNA1</b>                                              
    Field Name         KUNNR                                             
    Incl/Excl          I Inclusive defined set/array                     
    Option             EQ Equality (= Low)                               
    Low                0000144060                                        
    High

  • O Cluster Algorithm giving only one cluster

    hello,
    I am using Oracle 10g O Cluster Algorithm for clustering. i have 790 rows of data with 18 attributes all are of float data type.
    I am using ODM for creating clustering, but clustering resulting in creation of only one cluster.
    can any body knows what is the actual problem.
    please reply soon..
    thanks in advance

    It is possible for OCluster (OC) to return a single cluster if it did not find any natural clusters in the data. That is, it did not find any split in the data that would separate well the data into two groups. The number of clusters settings in OC is not the desired number of cluster but the maximum number of clusters. One way to validate this is to look at the histogram of your 18 attributes and see if there are clear peaks and valleys. In order for OC to find a split you should see at least two peaks with a reasonably deep valley (the actual criterion is statistical) in one of the attributes. If you don't see that than OC would not create more than one cluster. I am assuming that you are using ODMR and the data preparation steps suggested by ODMR.
    You can also try to increase the sensitivity parameter. This will allow OC to accept clusters that it would not consider significant otherwise.
    If you still want to partition your data even when OC did not find any clusters than you may try KM. KM will split the data into K clusters as long as there is enough data for that.
    --Marcos                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • Work Items to PR Agents (Only one of two agents received)

    Dear all,
    I am facing a problem like this:
    In my PR Workflow, the task TS00007986 is assigned agents by position. There is one position applied for a particular release strategy and there are two agents under this position.
    Now, there is one PR created, it went to the correct release strategy and thus sent to the correct agent. However, only one of the agent is receiving that work item while the other don't. In another words, instead of sending to both the agents, only one received.
    In SWEL, the possible agents are showing both agents' names, but the icon "In User's Inbox" is only appearing on one of the agent.
    I would like to know, what would be the possible error for this and in such cases, how could I trace the errors?
    Thank you very much in all advances.

    Here's an update on this issue:
    For example, the two agents are Agent A and Agent B.
    I think Agent A and Agent B both received the work items. However, Agent A executed the work item but later canceled the action without processing the work item (approved or rejected the PR). When Agent A executed the work item, the same work item would be removed from Agent B's inbox, but it is still in Agent A's inbox.
    The problem is, the work item has yet to be processed. In this case, how this issue should be solved (only processed work item is removed from all the agents' inbox)?
    Thank you very much.

  • Virtual IPs in a zone (two interfaces in a zone, but only one real NIC)

    Hello,
    I would like to give Solaris10 zones a try for our project development, where I need to simulate a network of computers:
    C1 <----> C2I1 C2I2 <---> C3
    i.e. machines C1 and C3 does have one NIC and machine C1 does have two NICs connected to C1 and C3. On C2 there will be running our testing application firewall software, hence this configuration.
    Now the question is: I have amd64/solaris10 box with only one NIC available. Is it possible to use some kind of virtual network device (like dummy0 in linux) in solaris to simulate a needed interface? Or is it simply possible to configure one zone (C2) with two independed IPs bound to one NIC?
    In my example zones will simulate all three: C1, C2 and C3 machines and the issue come from C2 zone configuration.
    Thanks!
    Karel

    Hello,
    I would like to give Solaris10 zones a try for our
    project development, where I need to simulate a
    network of computers:
    C1 <----> C2I1 C2I2 <---> C3
    i.e. machines C1 and C3 does have one NIC andmachine
    C1 does have two NICs connected to C1 and C3. OnC2
    there will be running our testing application
    firewall software, hence this configuration.I assume you mean C2 has two NICs?True! My mistake.
    Now the question is: I have amd64/solaris10 boxwith
    only one NIC available. Is it possible to use some
    kind of virtual network device (like dummy0 inlinux)
    in solaris to simulate a needed interface? Or isit
    simply possible to configure one zone (C2) withtwo
    independed IPs bound to one NIC?Yes. If you're doing it by hand, you add a colon and
    an instance number to the physical interface. So if
    the interface is hme0, a virtual interface could be
    hme0:1.
    If you're using zones, then you just need to
    configure a new IP address and the physical interface
    to use.Nice!
    In my example zones will simulate all three: C1,C2
    and C3 machines and the issue come from C2 zone
    configuration.Then it doesn't matter how many NICs you have. None
    of the traffic will hit the network. It'll all be
    done via loopback drivers.Do you mean I should use lo0 device for zones or that just using hme0 will results in optimization of trafic on localhost so that it will not hit wire?
    Thanks!
    Karel

  • Fbl5n: The printer provides me only one customer items for each page...

    Hi all,
    launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
    I'd like obtaining more customer items for each page...
    What to do?
    Thanks

    Hi Umberto..
    Thats how the standard report works..
    To meet your requirement, you would probably need to look at another standard report.
    In case you need further clarification, please feel free to write to me..
    Good Luck!
    Lucid-Mind...

  • I can see only one ringtone in the custom ringtone box.plz help

    i can see only one ringtone in the custom ringtone box.plz help

    Cap,
    This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
    If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
    Regards.

  • Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

    Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
    <Email Edited By Host>

    These are user-to-user forums - I've asked the hosts to remove your email address from your post.
    Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I added a custom ringtone . Then later I tried to add another three set  but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

    I added a custom ringtone . Then later I tried to add another three set  but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

    Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

Maybe you are looking for