Is field Mara-Behvo mapped into CRM?

Hi all
I'd like to set a control into sales order over the values of BEHVO-MARA field.
Am I wrong or it is not mapped into CRM?
Thank you
Pierluigi

Solved myself

Similar Messages

Get the mapping values from one message mapping into another message mappin

Hi All,
I created two graphical message mappings. In first message mapping i created one user defined function and set one global container parameter and I need to use this parameter in my second message mapping user defined function. But the global container parameters can be used in different user defined functions in same message mapping. So is there any way to use the values which are set in one message mapping into another message mapping. If yes, please help me how to get?

Hi Koteswara rao,
As you said global container parameters from first message mapping are not accessible from second message mapping program.
i haven't faced situation like this.but, if you have some unmapped field in target message in first message mapping,you can put global variables data in that unmapped field.
anyway the output of first message mapping would be input for 2nd messages mapping,so you can access global data(unmapped field filled with global data in 1st MM) from 2nd mapping program..
Cheers,
Jag

Passing field value from appoinment into task

Hi,
I need to pass the field values from appointment into the task. I was able to pass values from one record type to another but in this case as both appointment and task belong to the same record type namely activity and they are having the same foreign key namely ActivityId.
So any one please tell me , is it possible to pass values from appointment in to the task or not ?
If so how?
Thanks,
Kirubahar.
Edited by: Kiruba on Mar 4, 2011 6:45 AM

Write a workflow and select the field you want to copy the value into in the Field Name and the value you want to copy in value field, you don't need to use joinfieldValue at all.
cheers
Alex

Organization download into CRM

Hi,
We are downloading org structures from ECC to CRM. But we have multiple org structures in ECC system(like sales, HR, Work flow). But only few are relevant for CRM system and we need to download only specific org structures into CRM. I am downloading this using PFAL. But when I schedule the change pointers job, it is brining all the org structures into CRM system which are not relevant for CRM. I would like to restrict only specific org structure changes from ECC to CRM system.
Could you please advise how to set up this kind of filters, specific to one root organization and changes relevant for the org which was downloaded initially into CRM system.
Thanks&Regards,
Kumar Budidagaddapalli.

Hello Kumar,
For Downloading Organization structure use CRM Transaction code CRMC_R3_ORG_GENERATE.
You can manullay select here the required R/3 Sales Organization, Sales Office & Sales Group structure.
Then generate those selected structure from R/3 to CRM System.
You can use Transaction code PFAL in R/3 to download employees from R/3 to CRM.
You can select the required data by choosing in Object ID field.
Regards,
Rajendra Sonawane

From ISA into CRM

Hi Experts,
I have a requirement like this:
The Bill to party number will be passed to the Sales order from ISA(Internet Sales) in a text field or in an unused field in the CRM sales order. So if we can get this information and put it in the bill to party field before saving the sales order, the issue of saving the sales order twice will be eliminated.
In short what we have to do is
Before saving any sales order in CRM, get the input in the text field into CRM sales order and replace the bill to party by the entries in that field.
Can any body sahre this and give some solution?
Thanks in Advance.

You can implement order_save badi.
In prepare method, you can fetch the whole order using function crm_order_read. You can get your custom field here, get bill to party number.
Now you can modify the order using function crm_order_maintain to replace your bill-to-party.
Regards,
Kaushal

Need to know how to check the outbound queue in SAP for data flow into CRM

Hi Specialist's,
I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
Is there any other way in SAP that i can check?
Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
Usefull answers will definitely be rewarded with points .
Thanks,
Abhinav.

Hi Abhinav,
There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
Reward points if it helps.
Regards,
Amit Mishra

Middleware Replication-ISU Installation Facts into CRM Service Contract

Hi All,
I would like to share an update which I have followed for one of my implementation project.
Following document will help you, if you want to replicate some of the data from ISU to CRM Service contract custom fields, which is not the standard replication practice.
[Middleware Replication-ISU Installation Facts into CRM Service Contract|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30e51278-00f0-2d10-89a9-ee3d76447650]
Appreciate your feedback.
Cheers,
Suraj

Hi Fritz,
As requested following are the code samples-
For ISU System BAdI "ECRM_CRM_DOWNLOAD" as below:
X_CONTRACTPOS TYPE ECRM_CRMCONTRACT_DATA_POS Item Data (Enhanced)
XY_CONTRACTPOS TYPE ECRM_CRMCONTRACTPOS Transfer Structure: Contract Status from CRM to IS-U
XY_CONTRACTPOSX TYPE ECRM_CRMCONTRACTPOSX Transfer Structure: Contract Status from CRM to IS-U
TXY_CONTRACTCONF TYPE ECRM_CRMCONTRACTCONF_TAB Configuration Container
TXY_CONTRACT_STATUS_DATES TYPE ECRM_CRMCONTRACT_STATUS_DAT_T Status and Date Tab
METHOD if_ex_ecrm_crm_download~crm_download_fill_data_new.
*...Local data declaration
DATA : l_c_string1 TYPE string1,
 ls_contractconf TYPE ecrm_crmcontractconf.
IF x_contractpos-partner IS NOT INITIAL AND
 x_contractpos-everh-anlage IS NOT INITIAL.
 SELECT SINGLE string1
 FROM ettifn
 INTO l_c_string1
 WHERE anlage = x_contractpos-everh-anlage.
 IF sy-subrc EQ 0.
 MOVE : x_contractpos-partner TO ls_contractconf-partner,
 x_contractpos-everh-contractpos TO ls_contractconf-ref_guid,
 'OPERAND' TO ls_contractconf-attr_name,
 l_c_string1 TO ls_contractconf-value.
 CALL METHOD me->fill_container
 EXPORTING
 ip_contractconf = ls_contractconf
 ip_value = ls_contractconf-value
 ip_name = 'Operand'
 CHANGING
 li_contractconf = txy_contractconf.
 ENDIF.
ENDIF.
ENDMETHOD.
VALUE( IP_CONTRACTCONF ) TYPE ECRM_CRMCONTRACTCONF Configuration Container
VALUE( IP_VALUE ) TYPE TEXT70 Error message text - long text of the error
VALUE( IP_NAME ) TYPE CU_CHARC Characteristic Name
VALUE( LI_CONTRACTCONF ) TYPE ECRM_CRMCONTRACTCONF_TAB Configuration Container
METHOD fill_container.
DATA : l_c_contractconf TYPE ecrm_crmcontractconf.
FIELD-SYMBOLS : <contractconf> TYPE ecrm_crmcontractconf.
l_c_contractconf = ip_contractconf.
READ TABLE li_contractconf ASSIGNING <contractconf> WITH KEY ref_guid = ip_contractconf-ref_guid
 attr_name = ip_name.
IF sy-subrc EQ 0.
 <contractconf>-value = ip_value.
ELSE.
 l_c_contractconf-value = ip_value.
 l_c_contractconf-attr_name = ip_name.
 INSERT l_c_contractconf INTO TABLE li_contractconf.
ENDIF.
ENDMETHOD.
For CRM system BAdI "ECRM_DOWNLOAD" as below:
IP_MTR_TYPE TYPE /NPC/MTRTYPE Meter Type
IP_REF_GUID TYPE CRMT_OBJECT_GUID GUID of a CRM Order Object
CP_CS_TRANS_MSG TYPE BAD_BUS_TRANSN_MESSAGE Transaction Messaging BDoc
METHOD fill_container.
DATA: li_flds_upt_orderadm_i TYPE TABLE OF smog_sfldn.
FIELD-SYMBOLS : <orderadm_i> TYPE bad_orderadm_i_mess.
READ TABLE cp_cs_trans_msg-orderadm_i ASSIGNING <orderadm_i> WITH KEY guid = ip_ref_guid.
IF sy-subrc EQ 0.
 APPEND 'ZZ_METER_TYPE' TO li_flds_upt_orderadm_i.
 CALL FUNCTION 'SMO_SNDBITS_SETX'
 EXPORTING
 structurename = 'BAD_ORDERADM_I_MESS'
 ddic = 'X'
 TABLES
 sfields = li_flds_upt_orderadm_i
 CHANGING
 sndbits = <orderadm_i>-sendbits
 EXCEPTIONS
 structure_not_found = 1
 wrong_fieldname = 2
 OTHERS = 3.
 <orderadm_i>-zz_meter_type = ip_mtr_type.
ENDIF.
IS_CONTRACT_DATA TYPE ECRM_ISU_CONTRACT_DATA2
CS_BUS_TRANS_MSG TYPE BAD_BUS_TRANSN_MESSAGE Transaction Messaging Business Document
METHOD if_ex_ecrm_download~ecrm_download_fill_data.
DATA : ls_contractconf TYPE ecrm_isu_contractconf2,
 ls_orderadm_i TYPE bad_orderadm_i_mess.
LOOP AT is_contract_data-t_contractconf INTO ls_contractconf.
 READ TABLE cs_bus_trans_msg-orderadm_i INTO ls_orderadm_i WITH KEY guid = ls_contractconf-ref_guid.
 IF sy-subrc EQ 0.
 MOVE : ls_contractconf-value TO ls_orderadm_i-zz_meter_type.
 CALL METHOD me->fill_container
 EXPORTING
 ip_mtr_type = ls_orderadm_i-zz_meter_type
 ip_ref_guid = ls_orderadm_i-guid
 CHANGING
 cp_cs_trans_msg = cs_bus_trans_msg.
 ENDIF.
ENDLOOP.
ENDMETHOD.
ENDMETHOD.
Cheers,
Suraj

All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
Please suggest a solution.
Thanx in advance.
Edited by: Aritra on Nov 28, 2011 11:37 AM

Hi,
i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
so to resolve this error just remove changes you manually did. or remove that code and again create start routine and paste the code which u need.
Thanks & Regards,
NIKHIL

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
Reward points if it helps!!
Best regards,
Vikash.
Message was edited by: Vikash Krishna

How to write the output of a mapping into a file (OWB10.2

Hi
I am using Oracle 10.2.0.1 version of OWB.
the task is to write the output of a mapping into a File (Flat File).
Please help me out!
Regards
Abi

Hi,
Create the file format thru OWB and mention the location in OWB. Deploy the file and it will be ready to use for target load. Make sure the connection to the target loc is available.
Regards
Bharadwaj Hari

Can I cut and paste directions obtained via maps into a word doc or something so I can see them if I can't connect to the internet

Can I cut and paste directions form maps into a word doc - or save it somewhere on my iPad so I can access it when I can't access the Internet?

Take a screen short.
Simultaneously press the Sleep and Home button. You will notice an on-screen flash. If you have sound enabled, you will hear a camera click.
The screen shot is stored in Camera Roll.

Is there a way to import a indd CS4 file with its Data Fields names and properties into CC?

I have to convert numerous files from CS4 to CC. The CS4 files are using external data from a CSV file. When I open the file in CS4 I can enable the preview and see the data from the CSV file. But when I save the file as indd or idml and try to open it in InDesignCC then I can't see the data as preview. I can see the Data fields (text).I think it's because it doesn't recognize the data fields from the CS4 file. If I delete a data field and remap it I will be able to see the preview for the field I just mapped. the other fields remain the unchanged, like they were just text.
Any help with this topic will be very appreciated. I have about 70 data fields per document and about 100 documents to go through.
Update: The symbol for a data field, ex: «fullname_2» change size when I delete and remap it. Explanation: When I open the CS4 file in IndesignCC I can't view a preview of the Data field(s) (almost positive because it's plain text). The data fields show like this «fullname_2». But when I delete that and drag a field from the data field list it shows like this <<fullname_2>>. So definitely, CC is not reading the data fields from InDesign CS4.
P.S.: The fields above («fullname_2» and <<fullname_2>> are copy and paste from Indesign CC.

I'm attaching this image so this forum can notice the difference on the Data fields from CS4 and the ones added on CC

Data from a file need to be read and mapped into a custom table of R/3

Hello all,
This is related to inbound to SAP ECC via SAP PI.
There is a requirement concerning PI part that data from a file need to be read and mapped into a custom table of R/3.
To have this scenario developed , do we have any other option than the Proxy ?
My understanding is as follows : File --> SAP PI --> Proxy
You suggestions are welcome.
Regards,
Rachana

Hi Ravi,
As suggested by Inaki, you can use proxy communication in recever.
but you can also use the below
FILE -----> PI -------> PROXY
RFC
IDOC
to communicate to ECC system.
Regards
srinivas

XML Data into CRM

Hi Experts,
Can any body tell me how can we get XML data from 3rd party(For ex: Serena tool) into CRM system?

Hi Ravi,
You can populate the BAPI's from the IDOC data and then BAPI will create the data into the system. SAP has provided n number of BAPI's for the same.
For e.g. Say the XML file has the Business Partner data. XI converts it into IDOC and sends it to CRM system. In CRM we read the data from the IDOC and then populate the BAPI BAPI_BUPA_CREATE_FROM_DATA to create the business partner, BAPI_BUPA_ADDRESS_ADD to create address data for the business partner and so on.
Reward points if it helps.

Is field Mara-Behvo mapped into CRM?

Similar Messages

Maybe you are looking for