Is it allowed to update UDT or UDF directly?
Hi,
I am having an issue using the DI to import into UDT and I was wondering if I can insert/update directly to UDF or UDT in SAP B1.
Please let me know
Thanks
Hector
Hi Hector,
You can insert/update into UDT. It's your table.
For UDF, it seems to be good to use the DI object to insert or update.
Example :
- Update an user fields in Quotations Object.
oQuotations.Lines.UserFields.Fields.Item("U_IFC_SEL").Value = oEdit.Value;
int ret = oQuotations.Update();
- Insert data in UserTable :
SAPbobsCOM.UserTable UT;
UT = SBO_Company.UserTables.Item("IFC_AFF_TMP");
UT.Code = oEd_DocEntry.Value + iLineNum.ToString() + i.ToString();
UT.Name = oEd_DocEntry.Value + iLineNum.ToString() + i.ToString();
int ret = UT.Add();
Hope i help you.
Michael
Edited by: Michael LECLERCQ on May 29, 2008 5:35 PM
Edited by: Michael LECLERCQ on May 29, 2008 5:39 PM
Similar Messages
-
Asking about query update sql to UDF or UDT
Hi experts,
Is it possible to do a query update/ insert SQL to UDT or UDF in SP notification ? I don't touch any core SAP's table. Just to UDF of UDT that i create myself. Is it possible ?
thanks in advance
regards
KKTo Rahul,
Thanks For your answer . So what is differences between SBO_SP_PostTransactionNotice and SBO_SP_TransactionNotification ? Usually i use SBO_SP_TransactionNotification for blocking some document or alert. So how about SBO_SP_PostTransactionNotice ?
Please tell me. I'm new in this.
To Gordon ,
So can i just make a query insert sql to UDT in SBO_SP_TransactionNotification ?
Thanks in advance
Regards
KK -
Specific role allowing to update ZEPR purchase orders.
Hi All,
Could you please tell me how to slove following problem?
There is custom PO type ZEPR.
Normal users (like buyers) would not be able to update purchase orders coming from Eprocurement(Third party ) into SAP. Because modifications must be done in Eproc and this modifications is sent to SAP by interface.
It is th normal process
Sometimes it is needed to modify such PO directly into SAP
The Eproc. administrator must be given a right to update PO(ZEPR) directly into SAP.
I am looking for a all existing role allowing to update such ZEPR type purchase orders.Hi,
Check Eproc. administrator roles and ensure authorization object "M_BEST_BSA" has ZEPR in the BSART (Purchasing document type) field. Field "ACTVT" should also have value "02" (change).
Cheers ! -
Customize Which Column to Display from UDT in UDF when Linked to UDT
Problem:
I have a UDF that links to a UDT. The problem is that when I select the UDF, it only displayes the columns from the UDT Code & Name. And for our purposes Code & Name are meaningless data points.
Question:
Can I choose which column is displayed from the UDT in the UDF?
Please see the attached image. THANKS!Hi,
This is SAP B1 standard behavior, But you can change name as terminal code. Other wise you can detach the UDT from UDF and then assign one FMS in the UDF for serach terminal code instead of code and name.
Hope this will work.
Regards
Sridharan -
[Solved] Windows Firewall rule that allows Windows Update
Can anyone kindly give me a Windows Firewall rule that allows Windows Update? Assume I'm running MMC's "Windows Firewall with Advanced Security" snap-in as Administrator. Note that a "solution" that takes down the outbound firewall is
not acceptable.
Thank You.
===== Solution =====
Suppose that, as the default, you've set the outbound firewall to block (see
To close the outbound firewall, below). In order for Windows Update to check whether an update is available and then to download the update files, you first need an outbound firewall
allow-rule that allows the Windows Update service to pass through the outbound firewall.
Prerequisite: Knowledge of the Microsoft Management Console (MMC) and its "Windows Firewall with Advanced Security" plug-in.
What you will do: You will use the "Windows Firewall with Advanced Security" MMC plug-in to create an outbound firewall rule that
allows '%SystemRoot%\System32\svchost.exe' (the generic service driver) to pass through the outbound firewall on behalf of 'wuauserv' (the name of the specific service that performs the update).
Warning: If you don't know what I'm writing about, get help.
Name: Allow Windows Update (...or any name you prefer - it doesn't matter)
Group:
Profile: Public
Enabled: Yes
Action: Allow
Program: %SystemRoot%\System32\svchost.exe
Local Address: Any
Remote Address: Any
Protocol: Any
Local Port: Any
Remote Port: Any
Allowed Computers: Any
Status: OK
Service: wuauserv
Rule Source: Local Setting
Interface Type: All interface types
Excepted Computers: None
Description:
To open the outbound firewall:
More accurate wording would be
Outbound connections are allowed unless explicitly blocked by a rule.
If you look at the standard rules you will find no block-rules. That means that nothing is blocked, everything is allowed, and the outbound firewall is wide open.
To close the outbound firewall:
More accurate wording would be
Outbound connections are blocked unless explicitly allowed by a rule.
If you look at the standard rules you will find only allow-rules that have been crafted to allow the vital Windows connections to pass through the outbound firewall. To an informed observer it's obvious that the firewall engineers crafted these
allow-rules so that users who closed the outbound firewall wouldn't have to write them. But the firewall engineers left out Windows Update.Hi mark,
Thanks for sharing, it will help other users who have similar issue.
Regards -
Either need ability to edit PS layer style in FC or allow for update check to the .psd file
There is not much control over look in FC of imported .psd file. So please allow for update import some how.
I think if you poll users you will find Designers and Artists are most familiar and comfortable with Photoshop than Illustrator. That is one of the reasons I never upgraded or pushed to get the latest illustrator. Illustrator seems to not be as easy to use as Photoshop or AfterEffects. I am hoping that CS4 is identical to Photoshop for me to even consider to upgrading. I only use illustrator for the vector brush storkes it can do to paths, or to open a vector file and instantly copy and paste it as smart object into Photoshop.
I also do not understand why every element in Photoshop can't behave like in AfterEffects. In AfterEffects every value is re-editable and stackable. Thus no need to come up with new workflow of converting to smart object as everything is smart.
To me it seems like software development groups are siloed from each other at Adobe. I hope I am proved wrong and roundtriping become real for Photoshop as well as Illustrator. -
Should I allow apple updates to my HP laptop
should I allow apple updates to my HP laptop
how do I know what to update without updating wrong things
and do I give the software the right to control my laptop?I limit Apple Udates to iTunes and iPod/iPhone software only. You want the updates to iTunes as some of them are security and stability things for both iTunes and your iPod or iPhone. The other Apple stuff I opt out of. Don't let it locate you with location services or add Bonjour since it is only needed for Apple file sharing like Apple TV.
-
No RETURNCODE 0 allowed in update routines in transfer mode
Hi,
After Applying a RETURNCODE = 4 to one characteristic in my update routine i get the following message:
No RETURNCODE <> 0 allowed in update routines in transfer mode
Message no. RSAU492
It seems that i doesn't allow me to modify a certain characteristic in my target ODS.
Any suggestions?
BR,
XibiHi,
could it be this problem (as described in an OSS note) ?
"Symptom
Various errors occur when you load reporting point data from CRM with the DataSource 0CRM_UT_POD_ATTR and update the data in BW:
1. Insufficient data is delivered, and all fields are empty except for the external reporting point name (EXT_UI_BW).
2. The restriction according to the external reporting point name (EXT_UI_BW) in the BW scheduler has no effect.
3. The update in BW to the InfoObject 0UCCRMPOD terminates with the error message RSAU-492 (Return code <> 0 is invalid in overwrite MODE in update routines).
Other terms
Sales, commercial and industrial customers, IS-U-CRM integration, IS-U, quotation controlling, quotation planning
Reason and Prerequisites
There is an error in the extractor. In addition, the selection according to EXT_UI_BW cannot be supported in the InfoPackage for technical reasons. The case was not caught when the texts for 0UCCRMPOD were updated because the texts for 0UC_POD (IS-U reporting point) had not yet been loaded from IS-U.
Solution
The error is eliminated in CRM 4.0 Support Package 05 and BI Content Add-On 3.20 Support Package 11 or BI Content Add-on 3.30 Support Package 04 or BI Content Add-On 3.51 Support Package 01.
Correction instructions for the CRM section are attached."
/manfred -
I allowed PC Update Support to take over my computer (long story) When they were done I checked them out and discovered they were most likely scammers. I ran my antivirus program and changed passwords. Should I be concerned that they may have installed malware?
If you are sure they were scammers the only way to be 100% sure they left nothing behind is to wipe your system disk, do a clean install and restore from a backup you are sure was made before the scammers got onto you system.
There is no other way to be sure that thye did not leave somehting behind. In addition if you have used any credit card numbers while on the system, back account (or any other) passwords, tax returns, etc. You need to be alert fo IIdentity Theft | Consumer Information. It may be a good idea to place a fraud alert with one of the credit reporting agencies (the link above will detail what to do)
And of course change the passwords right away.
good luck
Message was edited by: Frank Caggiano - This assumes you are in the States. Different procedures may apply in other countries. -
I allowed Apple updates about two weeks ago and now Safari is way too slow. I have tried using Airport and Ethernet and the problem is the same. Yesterday, I upgraded to Safari 5.1 and now the problem is worse. Any solutions?
I can't stand peremptory affirmations like "Nothing is wrong with Safari".
Thousands of users can't be wrong (see the discussions).
If I read you the right way, it's never software' fault, it's the user who's the culprit.
Amazing!
In this very case, the fact is we can't give to "christinefromfonthill" a good solution because weren't sitting in front of her Mac.
You give her a good advice which could, perhaps, lead to an improvement.
But must also admit that Safari is a very slow browser compared to Firefox or Chrome.
And you can't ignore all the problems which arose when upgrading to Lion and were related to the new build and specs of Safari 5.1.
The best example is the apparition of "garbage type" (use of Last Resort font) when reading numerous sites. This never occured before and is the direct consequence of Safari compliance to Web Open Type. This standard prohibits the use of Type 1 Postscript Fonts and is the reason why so many people are in trouble.
I use a Mac for more than 25 years.
I am a very "clean" user who hates the bells and whistles of third party.
My Mac is always up-to-date and despite all my Mac loving care, I run into some problems.
Imagine the nightmare which can occurs for the vulgum pecus who isn't, by definition, a power user aware of all the requirements for running a System in optimal conditions.
May be Safari is one step in advance on its time but lambda users are paying the price for it. -
[Solved] Windows Firewall rule that will allow Windows Update
The problem has been solved here:
https://social.technet.microsoft.com/Forums/en-US/62b9fd5c-10b2-4266-bc15-fcf3e79d20d4/solved-windows-firewall-rule-that-allows-windows-update?forum=w7itpronetworking
Everything from here down is obsolete.Go to Control Panel >Firewall>Advanced Settings. Then click
Action>Export policy to make a copy of your current policy in case you want to restore it. Then click
Action>Restore Default Policy.
This should allow you to use Windows Update.
See also:
https://technet.microsoft.com/en-in/library/bb693717.aspx
https://support.microsoft.com/kb/836941
S.Sengupta, Windows Entertainment and Connected Home MVP -
HT4972 Why 2nd generation IPod Touch is not allowed to update with newer IOS?
Why 2nd generation ipod touch not allowed to update its OS to IOS 5 or later? This limitation made that IPod more or less useless as updated apps cannot be installed.
Be sure to backup your current apps. They can not be downloaded again, Earlier iOS apps are becoming increasingly difficult to find. You may want to look at VintApps, new in the Apple app store, that makes this much easier.
https://www.facebook.com/VintApps313
Although there are thousands of available apps to choose from, they will definitively not be the latest greatest.
I wrote my 99 cent app specifically to help solve this kind of problem. I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
Cannot switch flash player settings to allow automatic updates
hi my flashplayer verion 11.7.700.224 will not allow me to switch it on to allow automatic updates (recommended) when in the advanced settings in flash player settings manager anyone any advice on resolving this please
Refer the thread below
http://forums.adobe.com/message/4723788
Check if the Flash Player Update service is On.
Thanks
Bhawna -
What can i do about this problem? I click "more details" and find out that the 'unknown program' is firefox. I click to install; but windows does not allow the updates to complete. I let the update window run for over an hour one day... it still did not complete.
Check that you do not run Firefox as Administrator.<br />
Right-click the Firefox desktop shortcut and choose "Properties".<br />
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.<br />
* Privilege Level: "Run this program as Administrator" should not be selected<br />
* "Run this program in compatibility mode for:" should not be selected<br />
Also check the Properties of the firefox.exe program in the Firefox program directory.<br /> -
ASHA 200 doesn't allow to update software
ASHA 200 doesn't allow to update software
First it says feature supported for sim1 only
then when selecting download it says Unable to download when abroadFOTA updates can be only downloaded via SIM1 on dual-SIM phones. That's a known limitation.
The other option is to use Nokia Suite. Find the instructions from here: http://www.nokia.com/global/support/software-update/belle-asha-symbian-software-update
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates
Maybe you are looking for
-
I cannot open downloaded PDF files even from trusted sources. The message says: "There was an error opening this document. The file is damaged and could not be repaired. This is a fairly recent development.
-
Best way to access Choice column 'choices'?
Hi, Background: I have a Choice field passed down from a Content Type Hub to a content type used in a Document Library in another site collection. This choice column has a lot of 'choice entries' (<Choice 1>, <Choice 2> etc....). These entries will p
-
Error after Adding Header Zfields to Item Level Screens?
Hi, When I add SLA Z fields from Node BTAdminI to the SRQM_SLAPRO/SLASrvCtrView,. Contract related SLA data is not appearing and all fields are appearing in the mode of grade out in WEB UI. Few of the fields are showing BTAdminI not bound as value.
-
How do i look at my stuff on icloud
New to the MacBook and dont know how to do too much. I need alot of help haha
-
I just finished getting off the phone wt Comcast. I've been on the phone wt them, several times, related to email, and all of their mail settings are correct. They told me that if I have more then one email client when using apple mail, the one I use