Is it available crystal output through printer in peoplesoft(web/PIA).
Post Author: rajaumareddy
CA Forum: Crystal Reports
Crystal output(through printer) to a Window when running via PIA (Web). Is it available in peoplesoft.
Addendum: later versions of Premiere Elements now have the SmartSound Sonicfire Pro Express Tracks version (not the Scoring Edition) included, rather than the older QuickTracks module. This allows one to use the newer SmartSound Multi-Track discs, where the older QuickTracks module will only work with some of the older Multi-Track discs. The version of SmartSound Sonicfire Pro Express Tracks included is limited, vs the Scoring Edition (available for purchase), but allows for a lot of editing of SmartSound material. The installation is separate from the installation of the Premiere Elements installation, and involves a download of the Sonicfire Pro Express Tracks installer. It is also necessary to then apply the update to the Sonicfire Pro Express Tracks program.
I feel, however, that the Sonicfire Pro Scoring Edition, when used with the Multi-Track discs, is so very useful, that I recommend anyone, who is serious about creating custom soundtracks for their Videos, look closely at it, and also that they see the SmartSound tutorials (on the SmartSound Web site), to discover the power that it provides - it is like having a million variations for each Multi-Track song.
Hunt
Similar Messages
-
I want to dispaly the output through printer or fax or email
i want to dispaly the output through printer or fax or email.
the selection screen are
SELECT-OPTIONS: S_MATNR FOR EKPO-MATNR OBLIGATORY.
PARAMETERS: P_RQNAME TYPE CHAR40,
P_LAND1 TYPE T005-LAND1 MEMORY ID LND MODIF ID LDS,
P_BUKRS TYPE T001-BUKRS MEMORY ID BUK OBLIGATORY,
P_SPRAS TYPE T002-SPRAS OBLIGATORY,
P_PRT_RB RADIOBUTTON GROUP GR1 DEFAULT 'X',
P_PRT_TX TYPE NAST-LDEST,
P_FAX_RB RADIOBUTTON GROUP GR1,
P_FAX_TX TYPE AD_FXNMBR1,
P_EML_RB RADIOBUTTON GROUP GR1,
P_EML_TX TYPE AD_SMTPADR.
how can i write the logicFor Printer Call FM GET_PRINT_PARAMETER.
For EMAIL & FAX call FM SO_OBJECT_SEND.
FM to send Email and FAX
Regards,
Amit -
Repeat output (through Print/Fax/Email)
Hii All
Our client has a requirement where we are looking forward for a functionality through which we can reprocess the billing output types through the print outs.
For eg. If for an invoice output has gone through EDI mode, then there we should have a functionality where the same output can be re-triggered but the output medium should give option for printer/email/fax.
I tried using transaction VF06 but thorugh that i can only reprocess EDI for EDI, printer to printer.
Can anyone let me know what needs to be done for a repeat output through a different medium.
Thanks & Regards,
Gaurav ManochaHi,
My understanding about your requirement is as below:
Your invoice has only one output type with EDI as it's transmission medium... right ? then you want to use the same output type wherein your transmission medium would be print/fax/email... right ? then I can say it is not possible... just b'coz you don't have output record for the transmission mediums print/fax/email for the mentioned output type.
So, only option in my openion would be to maintain output condition records according to transmission medium you require and then repeat the output via VF31
Hrishi -
AR Invoice Printing Blank page when printed through printer
Hi,
I customized AR invoice to give PDF output through BI Publisher.There is no issue when tried to view the output.
When tried to print the output through printer, It's given blank page.
All other BI publisher reports which will give PDF output in Straight single request are printing through printer correctly.
But AR invoice By standard program itself when fired, First a Multi Language Function will fire which will have output of 0 bytes and after that as a child request Original program with Required output will fire.
It seems that printer is printing Parent request output.
Can anyone please help me regarding this.
Thanks in advance,
Best Regards,
MaheshHi,
I'm guessing the concurrent program is outputting text (character mode) as opposed to PDF?
This could be a number of reasons:
1. Printer driver issue, e.g. the number of lines printed on the page is more than is defined for the printer driver: Try reducing the "Rows" on the current program definition
2. Printer PRT issue, extra page break could be being inserted.
3. The "box" in the report definition containing the address could be being expanding due to the extra address line, but not enough space so it forces a new page to be printed.
Gareth
Blog: http://garethroberts.blogspot.com
Web: http://www.virtuate.com -
Problem when trying to Print Statement Print through printer
Hi ,
I am facing a serious problem here , I customized the AR Statement Print to PDF output using BI publisher,
It's working fine in Viewing the output . But when i am trying to pront the output through printer .It's printing XML file.
Can anyone please help me regarding this.
Thanks in advance.
Best Regards,
MaheshCheck style of concurrent program it should be some think like PDF Publisher A4 if DBA has defined any style for BI Publisher reports. normally we can not use styles used for other reports
Thanks
Kamalakar -
Printing from Crystal Viewer through IE 7
I have a user that's printing some forms from a database that outputs to crystal viewer through IE 7. This error window comes up when the user tries to print the report from IE 7:
1. Your current security settings prohibit running ActiveX controls on this page, or
2. You have blocked a publisher of one of the controls
As a result, the page may not display correctly.
I've searched the issue and set the correct activex settings for this type of error for IE and still no dice. I've been searching tirelessly through different forums and tried various options from trying different activex controls and trying to set the virtual directory where activex needs to be activated. The environment is vista business and the browser is IE 7. I hear there compatibility issue's with vista and there's updated activex controls. I just wanted to know if there's an updated package so I can try this solution out as this is affecting a whole dept. Any info would be much appreciated! Thanks.Ok, if you are using 11.0 and not 11.5 then check out this [platforms |http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/e09198a1-911e-2b10-179f-ce8eed51aed0]pdf file. We do support Vista with the latest Service Pack but we do not support IE 7. So no work around for you. All I can suggest is either ask them to upgrade there program/runtime to CR XI R2 ( 11.5 ) or you will have to roll back to IE 6.
CR XI ( 11.0 ) is past its end of life so no new platform support will be added. Let your software owners know they can upgrade to CR XI R2 for free.
Here's the info:
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Do not do this yourself, they must update their runtime and application. You doing so will not work.
Thanks agian
Don -
Printing ALV Report output through Function Modules
Hi All,
I want to print my ALV Grid output through function modules/statement (not through print option in menu).
This is because, i am generating a PDF from spool when user clicks on a button. If any changes happened in the ALV output layout, they will be captured in spool through printing it.
So can you please tell me how to print the ALV Output through FMs or sending the ALV output to spool.
Thanks & Regards,
Senthil.
Edited by: senthil nathan on May 17, 2010 2:49 PMHi Dev,
Thanks for the reply.
I want to print the ALV when the user clicks on a button in toolbar. Lets say the user has made some changes to the layout, (E.g hiding a field) and when i print that output it should use the changed layout, If i use the FM suggested by you, i cant acheive this.
If you try to print this manually, the system uses the changed layout and not the original. Thats why i want to know FMs/statement to print.
Regards,
Senthil. -
Controls available in Output type
Hello Gurus,
Could you please tell me different controls available in Output types.
How different we configure the condition records for print and EDI output?
Points will be rewarded generously.
Thanks and Regards,
Pavan P.well in con recs we can maitain wht are the medium and partner tht shld be sent output if u want to configure is through a mail
here is how it goes
1 Automatic e-Mail Confirmation
When a sales order that has been created on the web has been saved, this should trigger an automatic email confirmation to be sent out. The configuration is described below at a high level (primarily screen shots). In this example, a new output condition type is created, which will trigger the email confirmation for the order type(s) used for Internet orders.
<! This documentation does not cover the setup of the email server (Exchange, SendMail, etc.),RFCs, SAP Office, and development of the SAPscript form, since these are different at each site. This document covers the configuration required within the SD module of the R/3 system to trigger the generation of output via email. !>
1.1 Condition Type ZEXT
IMG menu path:
Sales and distribution > Basic functions > Output control > Output determination > Output determination using the condition technique > Maintain output determination for sales documents > Maintain output types
1.1.1 General data:
The access sequence ensures that this output will only be used for Internet orders. This assumes that one or more order types are used exclusively for Internet processing.
1.1.2 Default values:
The default values indicate that the output is triggered immediately when the order is successfully saved. Standard-delivered settings were used for the Internet mail.
1.1.3 Print:
1.1.4 Archiving:
1.2 Add Condition Type ZEXT to Output Procedure V10000
IMG menu path:
Sales and distribution > Basic functions > Output control > Output determination > Output determination using the condition technique > Maintain output determination for sales documents > Maintain output determination procedures
The new condition type is added to the order output procedure, with the requirement of order confirmation.
1.3 Assign Procedure/Condition to Sales Order Type
IMG menu path:
Sales and distribution > Basic functions > Output control > Output determination > Output determination using the condition technique > Maintain output determination for sales documents > Assign output determination procedures > Allocate sales document header
The output is assigned to the order type used for Internet orders. The new condition type is the default output.
1.4 Assign the Output Form to the Condition Type
IMG menu path:
Sales and distribution > Basic functions > Output control > Output determination > Process output and forms > Assign forms and programs > Assign to sales document
The SAPScript form that should be used for the output is assigned. The form used for email should normally be different from the output used for printing.
1.5 Create Master Data for Condition ZEXT
Menu path:
Logistics > Sales and distribution > Master data > Output > Sales document > Create
Select condition type ZEXT: -
Error while sending PO output through mail in PDF format - Urgent
Dear friends,
Developed program to send sapscript output through mail in pdf format, the program running properly, even function module SO_NEW_DOCUMENT_ATT_SEND_API1 returning sy-subrc 0. But the external mail is not going to user lying in SAP outbox with message <b>"Wait for communications service"</b> . SCOT is properly configured, tested mails sending through SAP office.
Find below the source code:
REPORT zmm_porder_gm
NO STANDARD PAGE HEADING.
TABLES: ekko, ekpa, t161t, t052, komv, j_1imocomp, t001, esll.
Internal Tables
DATA : txt LIKE tline-tdline, "HEADER LINE
your_ref LIKE ekko-ihrez, "your ref
our_ref LIKE ekko-unsez, "our ref
mcompname LIKE t001-butxt,
itemname LIKE ekpo-txz01,
del_text LIKE tline-tdline, "delivery text
mat_po_text LIKE tline-tdline. "material po text
DATA: g_ind TYPE i.
DATA: it_esll LIKE esll OCCURS 0 WITH HEADER LINE.
DATA: sub_packno LIKE esll-sub_packno.
DATA : po_flag(1) TYPE c.
DATA : it_erev LIKE erev OCCURS 0 WITH HEADER LINE.
DATA : nmebeln LIKE thead-tdname,
obj LIKE thead-tdname.
DATA : tline LIKE tline OCCURS 0 WITH HEADER LINE. "HEADER TEXT
DATA : it_ekko LIKE ekko OCCURS 0 WITH HEADER LINE.
DATA : it_ekpo LIKE ekpo OCCURS 0 WITH HEADER LINE.
DATA : it_zmm_porder LIKE zmm_porder OCCURS 0 WITH HEADER LINE.
DATA : it_konv LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_ftr LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_rate LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_komv_tax LIKE komv OCCURS 0 WITH HEADER LINE. " For Tax Calculation
DATA : it_zmm_house_bank LIKE zmm_house_bank OCCURS 0 WITH HEADER LINE.
*DATA : mrate TYPE konv-kbetr VALUE 0, mrate1(15). rmoved by ganes and added following logic
DATA : mrate TYPE p VALUE 0 DECIMALS 2, mrate1(15).
DATA : mrate_gm TYPE p DECIMALS 2.
DATA : BEGIN OF it_konv1 OCCURS 0,
knumv LIKE konv-knumv,
kschl LIKE konv-kschl,
END OF it_konv1.
DATA : BEGIN OF it_t052u OCCURS 0.
INCLUDE STRUCTURE t052u.
DATA : END OF it_t052u.
DATA : mpay_terms LIKE t052u-text1.
DATA : mwaers LIKE konv-waers.
DATA : BEGIN OF xt052 OCCURS 0.
INCLUDE STRUCTURE t052.
DATA : END OF xt052.
DATA : it_t16ct LIKE t16ct OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF ztext OCCURS 0.
INCLUDE STRUCTURE ttext.
DATA : END OF ztext.
DATA : it_t001 LIKE t001 OCCURS 0 WITH HEADER LINE.
DATA : mtext(15) TYPE c.
DATA : it_adrc LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_ven LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_plt LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_makt LIKE makt OCCURS 0 WITH HEADER LINE.
DATA : it_eket LIKE eket OCCURS 0 WITH HEADER LINE. " Schedulling
DATA : it_eikp LIKE eikp OCCURS 0 WITH HEADER LINE. " Export
DATA : it_t001w LIKE t001w OCCURS 0 WITH HEADER LINE.
DATA : it_t685t LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_t618t LIKE t618t OCCURS 0 WITH HEADER LINE.
DATA : it_t685t_ftr LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_lfa1 LIKE lfa1 OCCURS 0 WITH HEADER LINE.
DATA : it_bapi_mltx_ga LIKE bapi_mltx_ga OCCURS 0 WITH HEADER LINE. "Material long text
DATA : mfirst TYPE i VALUE 0,
mpay_flag(1) TYPE c VALUE 'X',
mwerks LIKE t001w-werks,
msr TYPE i VALUE 0,
l_rate TYPE p DECIMALS 2 VALUE 0,
l_amt TYPE p DECIMALS 2 VALUE 0,
mflag(1) TYPE c,
mlctr TYPE i VALUE 0,
mfamt TYPE p DECIMALS 2 VALUE 0,
mcfamt(15) TYPE c,
mfword(100) TYPE c,
mkschl LIKE konv-kschl,
mchgamt TYPE p DECIMALS 2 VALUE 0,
mkbetr TYPE p DECIMALS 2 VALUE 0,
mkwert TYPE p DECIMALS 2 VALUE 0.
DATA : j_1iexcd TYPE j_1imocomp-j_1iexcd,
j_1icstno TYPE j_1imocomp-j_1icstno,
j_1ilstno TYPE j_1imocomp-j_1ilstno.
DATA : mjmop_r TYPE p DECIMALS 2 VALUE 0,
mjmoq_r TYPE p DECIMALS 2 VALUE 0,
mjecs_r TYPE p DECIMALS 2 VALUE 0,
mjvcs_r TYPE p DECIMALS 2 VALUE 0,
mjvrd_r TYPE p DECIMALS 2 VALUE 0,
mjsep_r TYPE p DECIMALS 2 VALUE 0.
DATA : mjmop_a TYPE p DECIMALS 2 VALUE 0,
mjmoq_a TYPE p DECIMALS 2 VALUE 0,
mjecs_a TYPE p DECIMALS 2 VALUE 0,
mjvcs_a TYPE p DECIMALS 2 VALUE 0,
mjvrd_a TYPE p DECIMALS 2 VALUE 0,
mjsep_a TYPE p DECIMALS 2 VALUE 0.
DATA : mtitle LIKE t161t-batxt.
DATA : no_ammend(10),request_by(50),ver_txt(100),ver_reason(100),stext(200).
begin of Email data declarations**************
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
DATA: it_docs TYPE STANDARD TABLE OF docs,
v_bin_filesize TYPE i,
it_lines TYPE STANDARD TABLE OF tline,
wa_lines TYPE tline.
DATA : i_pdf LIKE tline OCCURS 1000 WITH HEADER LINE,
v_pdf_bytecount TYPE i,
v_pdf_spoolid TYPE tsp01-rqident,
v_otf_pagecount TYPE i,
v_btc_jobname TYPE tbtcjob-jobname,
v_btc_jobcount TYPE tbtcjob-jobcount.
DATA: objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: vafilename(100) VALUE 'po_output.pdf'.
DATA: jobdata TYPE sxjobdata.
DATA arc_params TYPE arc_params.
DATA print_params TYPE pri_params.
DATA g_send_prog TYPE syrepid VALUE 'ZVF03_TEST_PROG'.
DATA immediate TYPE btcchar1.
DATA: i_jobname TYPE tbtcp-jobname,
i_jobcount TYPE tbtcp-jobcount,
i_jobstepcount TYPE tbtcp-stepcount.
DATA recipient_obj LIKE swotobjid.
CONSTANTS: sx_true TYPE sx_boolean VALUE 'X'.
TABLES: tbtcp.
end of Email data declarations**************
SELECTION-SCREEN : BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : mebeln FOR ekko-ebeln OBLIGATORY . " 75
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 12.
SELECTION-SCREEN COMMENT (20) text-b01.
PARAMETERS: b1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : END OF BLOCK block1.
SELECTION-SCREEN: BEGIN OF SCREEN 200 TITLE text-001 AS WINDOW.
PARAMETERS : p_email TYPE ad_smtpadr. "E-Mail Address
SELECTION-SCREEN: END OF SCREEN 200.
INITIALIZATION.
SET PF-STATUS 'ZMMPORD_STAT'.
AT SELECTION-SCREEN.
CASE sy-ucomm.
WHEN 'EMAIL'.
PERFORM zemail.
WHEN '&IC1'.
PERFORM load_data.
PERFORM process.
IF NOT p_email IS INITIAL.
PERFORM send_mail.
ENDIF.
ENDCASE.
*START-OF-SELECTION.
PERFORM load_data.
PERFORM process.
FORM load_data .
DATA : gindex LIKE sy-tabix.
SELECT * FROM t16ct INTO TABLE it_t16ct WHERE spras = 'EN'.
SELECT * FROM ekko INTO TABLE it_ekko WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * FROM erev INTO CORRESPONDING FIELDS OF TABLE it_erev FOR ALL ENTRIES IN it_ekko
WHERE edokn = it_ekko-ebeln AND rscod <> '' .
SORT it_erev BY edokn revno DESCENDING.
LOOP AT it_ekko.
IF NOT ( it_ekko-frgke EQ 'O' OR it_ekko-frgke EQ '0' ) .
MESSAGE e000(zsd) WITH 'Purchase Order is not Realeased'.
ENDIF.
ENDLOOP.
SELECT * FROM ekpo INTO TABLE it_ekpo WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * INTO TABLE it_makt
FROM makt
FOR ALL ENTRIES IN it_ekpo
WHERE matnr EQ it_ekpo-matnr.
SELECT * INTO TABLE it_lfa1
FROM lfa1
FOR ALL ENTRIES IN it_ekko
WHERE lifnr EQ it_ekko-lifnr.
ENDIF.
SELECT *
INTO TABLE it_t052u
FROM t052u
FOR ALL ENTRIES IN it_ekko
WHERE zterm EQ it_ekko-zterm
AND spras EQ 'EN'.
IF sy-subrc EQ 0.
SORT it_t052u BY zterm.
ENDIF.
SELECT * FROM eket INTO TABLE it_eket WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SORT it_eket BY ebeln ebelp.
ENDIF.
SELECT *
INTO TABLE it_eikp
FROM eikp
FOR ALL ENTRIES IN it_ekko
WHERE exnum EQ it_ekko-exnum.
IF sy-subrc EQ 0.
SORT it_eikp BY exnum.
SELECT *
INTO TABLE it_t618t
FROM t618t
FOR ALL ENTRIES IN it_eikp
WHERE expvz EQ it_eikp-expvz
AND spras EQ 'E'
AND land1 EQ 'IN'.
IF sy-subrc EQ 0.
SORT it_t618t BY expvz.
ENDIF.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'L'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * FROM konv INTO TABLE it_konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
LOOP AT it_konv.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv BY knumv kherk kschl.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'F'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * INTO TABLE IT_KONV_FTR FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0
AND KPOSN GT '000000'.
AND ( KRECH = 'B' " RTDK906167
OR KRECH = 'A' ).
SELECT * INTO TABLE it_konv_ftr FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0
AND kposn GT '000000'.
LOOP AT it_konv_ftr.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv_ftr-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv_ftr INDEX gindex.
ENDIF.
ENDLOOP.
IF it_konv_ftr[] IS NOT INITIAL.
SORT it_konv_ftr BY knumv kschl.
ENDIF.
SELECT KNUMV KSCHL INTO CORRESPONDING FIELDS OF TABLE IT_KONV1 FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
and kherk = 'D'
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0.
AND ( KRECH = 'B' RTDK906167
OR KRECH = 'A' ).
SELECT knumv kschl INTO CORRESPONDING FIELDS OF TABLE it_konv1 FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
DELETE ADJACENT DUPLICATES FROM it_konv1 COMPARING knumv kschl.
LOOP AT it_konv1.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv1-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv1 INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv1 BY knumv kschl.
ENDIF.
SELECT * INTO TABLE it_t685t
FROM t685t
FOR ALL ENTRIES IN it_konv
WHERE kschl EQ it_konv-kschl
AND kappl EQ it_konv-kappl
AND spras EQ 'E'.
SELECT * INTO TABLE it_t685t_ftr
FROM t685t
FOR ALL ENTRIES IN it_konv_ftr
WHERE kschl EQ it_konv_ftr-kschl
AND kappl EQ it_konv_ftr-kappl
AND spras EQ 'E'.
it_t685t_ftr-kschl = 'JVCS'.
it_t685t_ftr-vtext = 'IN CST in vat'.
APPEND it_t685t_ftr.
SELECT * INTO TABLE it_zmm_house_bank
FROM zmm_house_bank
WHERE ebeln IN mebeln.
ELSE.
MESSAGE e899(mm) WITH 'Data not found for selection criteria...'.
ENDIF.
ENDFORM. " Load_data
FORM process .
DATA : mctr TYPE i VALUE 1.
DATA : gindex LIKE sy-tabix.
DATA : mline(75) TYPE c.
DATA : mlifn2 LIKE ekpa-lifn2.
DATA : mv_name LIKE lfa1-name1,
madrnr LIKE lfa1-adrnr.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZMM_PORDER'
language = sy-langu
OPTIONS = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
LOOP AT it_ekko.
CALL FUNCTION 'START_FORM'
EXPORTING
form = 'ZMM_PORDER'.
SELECT SINGLE *
FROM t001
INTO it_t001
WHERE bukrs EQ it_ekko-bukrs.
mcompname = it_t001-butxt.
TRANSLATE mcompname TO UPPER CASE.
Document Type
SELECT SINGLE batxt
INTO mtitle
FROM t161t
WHERE bstyp EQ 'F'
AND spras EQ 'E'
AND bsart EQ it_ekko-bsart.
REFRESH it_adrc.
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc_plt
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
REFRESH : xt052.
mfamt = 0.
msr = 0.
in 500c this statement failed.
SELECT SINGLE * FROM T052 INTO XT052 WHERE ZTERM = IT_EKKO-ZTERM.
CALL FUNCTION 'FI_TEXT_ZTERM'
EXPORTING
I_T052 = XT052
TABLES
T_ZTEXT = ZTEXT.
As per Preeti... Shipment address should be shown on top as purchase order company address. 27.04.
PERFORM writeform USING 'PLANT' 'PLANT'.
SELECT SINGLE name1 adrnr
INTO (mv_name,madrnr)
FROM lfa1
WHERE lifnr EQ it_ekko-lifnr.
REFRESH it_adrc[].
CLEAR it_adrc[].
FREE it_adrc[].
SELECT SINGLE *
INTO it_adrc_ven
FROM adrc
WHERE addrnumber EQ madrnr.
READ TABLE it_lfa1 WITH KEY lifnr = it_ekko-lifnr.
PERFORM writeform USING 'VENDOR' 'VENDOR'.
Shipment
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
up to 1 rows.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
SELECT SINGLE j_1iexcd j_1icstno j_1ilstno
INTO (j_1iexcd,j_1icstno,j_1ilstno)
FROM j_1imocomp
WHERE werks = mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
PERFORM writeform USING 'SHIPMNT' 'SHIPMNT'.
READ TABLE it_eikp WITH KEY exnum = it_ekko-exnum.
IF sy-subrc EQ 0.
READ TABLE it_t618t WITH KEY expvz = it_eikp-expvz.
ENDIF.
your_ref = it_ekko-ihrez.
our_ref = it_ekko-unsez.
READ TABLE it_erev WITH KEY edokn = it_ekko-ebeln.
IF sy-subrc = 0.
no_ammend = it_erev-revno.
request_by = it_erev-crnam.
ver_txt = it_erev-txz01.
READ TABLE it_t16ct WITH KEY rscod = it_erev-rscod.
IF sy-subrc = 0.
ver_reason = it_t16ct-rstxt.
ELSE.
ver_reason = ''.
ENDIF.
ELSE.
no_ammend = ''.
request_by = ''.
ver_txt = ''.
ver_reason = ''.
ENDIF.
PERFORM writeform USING 'PO_INFO' 'PO_INFO'.
IF it_zmm_house_bank[] IS NOT INITIAL.
READ TABLE it_zmm_house_bank INDEX 1.
PERFORM writeform USING 'BANKDTL' 'BANKDTL'.
ENDIF.
PERFORM writeform USING 'HDR_INFO' 'HDR_INFO'.
PERFORM writeform USING 'BRK_TTL' 'MAIN'.
msr = 1.
mlctr = 1.
*added by ganesh to prevent deleted items to appear in print out
LOOP AT IT_EKPO WHERE EBELN EQ IT_EKKO-EBELN.
LOOP AT it_ekpo WHERE ebeln EQ it_ekko-ebeln AND loekz NE 'L'.
*end of change
CLEAR: mrate, mrate1.
SELECT * FROM konv INTO TABLE it_konv_rate
WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp
AND ( kschl EQ 'PBXX' OR kschl EQ 'PB00' OR kschl EQ 'P001' ).
LOOP AT it_konv_rate.
IF it_konv_rate-kpein > 0. " added by ganesh as per sudhir 12.10.2007
mrate_gm = it_konv_rate-kbetr / it_konv_rate-kpein.
mrate = mrate + mrate_gm. " added by ganesh as per sudhir 12.10.2007
ELSE.
mrate = mrate + it_konv_rate-kbetr.
ENDIF.
IF it_konv_rate-waers IS NOT INITIAL.
mwaers = it_konv_rate-waers.
ENDIF.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mrate = mrate * 100.
ENDIF.
End for japanies Yen
mrate1 = mrate.
End rate
mfirst = 0.
MFAMT = MFAMT + ( IT_EKPO-NETPR * IT_EKPO-MENGE ).
mfamt = mfamt + ( mrate * it_ekpo-menge ).
PERFORM get_mat_long_text.
DATA: lt_ctr TYPE i VALUE 0,lt_ctr1 TYPE i, lt_count TYPE i VALUE 0. " Long text counter
DESCRIBE TABLE it_bapi_mltx_ga LINES lt_count.
CLEAR it_bapi_mltx_ga.
*Added by Rajiv 10.05.2007 Read and if condition RTDK906165
READ TABLE it_konv WITH KEY knumv = it_ekko-knumv
kposn = it_ekpo-ebelp.
mkbetr = 0.
mkwert = 0.
IF sy-subrc EQ 0.
LOOP AT it_konv WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp.
IF it_konv-krech EQ 'A'.
mkbetr = it_konv-kbetr / 10.
ELSE.
mkbetr = it_konv-kbetr.
ENDIF.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkbetr = mkbetr * 100.
ENDIF.
End for japaies Yen
IF mkbetr LT '0'.
mkbetr = mkbetr * ( -1 ).
ENDIF.
mkwert = it_konv-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkwert = mkwert * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mkwert.
IF mkwert LT '0'.
mkwert = mkwert * ( -1 ).
ENDIF.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE it_t685t WITH KEY kschl = it_konv-kschl BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.
CLEAR it_bapi_mltx_ga.
ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
mlctr = mlctr + 1.
ENDLOOP. " it_konv.
ELSE.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
mfirst = 0.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.CLEAR it_bapi_mltx_ga.ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
ENDIF.
*Commented by rajiv 10.05.2007 used this code in above condition.
added by ganesh on 260407 to print record
if it_konv is initial.
READ TABLE IT_MAKT WITH KEY MATNR = IT_EKPO-MATNR.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP BINARY SEARCH.
mFirst = 0.
if mFirst eq 0.
PERFORM WRITEFORM USING 'BRK_INFO' 'MAIN'.
mFirst = 1.
else.
add 1 to lt_ctr.
clear it_bapi_mltx_ga.
read table IT_BAPI_MLTX_GA index lt_ctr. "For long text
if sy-subrc ne 0.clear it_bapi_mltx_ga.endif.
PERFORM WRITEFORM USING 'BRK_INFO1' 'MAIN'.
Endif.
endif.
end of change
REFRESH it_komv_tax.
PERFORM get_tax_cal USING it_ekpo-ebeln
it_ekpo-ebelp.
Changing it_komv_tax.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'T'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
LOOP AT it_komv_tax.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_komv_tax-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_komv_tax INDEX gindex.
ENDIF.
ENDLOOP.
LOOP AT it_komv_tax WHERE kwert IS NOT INITIAL.
IF ( IT_KOMV_TAX-KSCHL EQ 'JMOP' OR
IT_KOMV_TAX-KSCHL EQ 'JECS' OR
IT_KOMV_TAX-KSCHL EQ 'JSEP' OR
IT_KOMV_TAX-KSCHL EQ 'JMOQ' OR
IT_KOMV_TAX-KSCHL EQ 'JVCS' OR
IT_KOMV_TAX-KSCHL EQ 'JVRD' OR
IT_KOMV_TAX-KSCHL EQ 'JMIP' OR
* IT_KOMV_TAX-KSCHL EQ 'JEIP' OR
IT_KOMV_TAX-KSCHL EQ 'JSEI' OR
IT_KOMV_TAX-KSCHL EQ 'JSRT' OR
IT_KOMV_TAX-KSCHL EQ 'JEC3' OR
IT_KOMV_TAX-KSCHL EQ 'JVRN' )
AND IT_KOMV_TAX-KWERT IS NOT INITIAL.
SELECT SINGLE vtext
INTO mtext
FROM t685t
WHERE kschl EQ it_komv_tax-kschl
AND spras EQ 'E'.
l_rate = it_komv_tax-kbetr / 10.
l_amt = it_komv_tax-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
l_amt = l_amt * 100.
ENDIF.
End for japaies Yen
ADD l_amt TO mfamt.
IF lt_ctr LT lt_count. "Long text
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
ELSE.
CLEAR it_bapi_mltx_ga.
ENDIF.
IF l_rate EQ 0 OR l_amt EQ 0.
l_rate = ''.
l_amt = ''.
ENDIF.
PERFORM writeform USING 'TAX_LINE_ITEM' 'MAIN'.
ENDIF.
ENDLOOP.
IF lt_ctr LT lt_count.
DATA mbal_line TYPE i.
mbal_line = ( lt_count - lt_ctr ).
DO mbal_line TIMES.
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
IF sy-subrc = 0.
PERFORM writeform USING 'LTEXT' 'MAIN'.
ENDIF.
ENDDO.
ENDIF.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F04'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
del_text = tline-tdline.
ENDIF.
CONDENSE del_text.
ENDLOOP.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F03'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh.
CLEAR : po_flag, mat_po_text.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
MOVE tline-tdline TO mat_po_text.
CONDENSE mat_po_text.
PERFORM writeform USING 'MTRL_PO_TEXT' 'MAIN'.
po_flag = 'X'.
CLEAR : mat_po_text.
ENDIF.
ENDLOOP.
*Added lines below for Schedule delivery for line item on 09.05.2007:Rajiv
CLEAR g_ind.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
g_ind = sy-tabix.
LOOP AT it_eket FROM g_ind.
IF it_eket-ebeln EQ it_ekpo-ebeln AND it_eket-ebelp = it_ekpo-ebelp.
PERFORM writeform USING 'SCHEDULE' 'MAIN'.
ELSE.
EXIT.
ENDIF.
ENDLOOP.
*End Addition:Rajiv
PERFORM writeform USING 'REQSLP' 'MAIN'.
mlctr = mlctr + 1.
msr = msr + 1.
CLEAR: lt_ctr, lt_ctr1.
following lines added by ganesh to add service po details as per Mr. sadiq 21.08.2007
IF it_ekpo-packno IS NOT INITIAL.
CLEAR sub_packno.
SELECT SINGLE sub_packno INTO sub_packno FROM esll WHERE packno = it_ekpo-packno.
IF sub_packno IS NOT INITIAL.
CLEAR it_esll.
REFRESH it_esll.
SELECT * FROM esll INTO CORRESPONDING FIELDS OF TABLE it_esll
WHERE packno = sub_packno.
IF sy-subrc = 0.
PERFORM writeform USING 'SERVICE_PO_TEXT' 'MAIN'.
ENDIF.
LOOP AT it_esll.
CONCATENATE sub_packno it_esll-introw INTO obj.
CALL FUNCTION 'READ_TEXT' "4500002446 C300
EXPORTING
id = 'LTXT'
language = sy-langu
name = obj
object = 'ESLL'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
CLEAR stext.
LOOP AT tline.
CONCATENATE stext tline-tdline INTO stext SEPARATED BY space.
ENDLOOP.
FREE tline.
CLEAR tline.
REFRESH tline.
PERFORM writeform USING 'SERVICE_PO' 'MAIN'.
PERFORM writeform USING 'SERVICE_TEXT' 'MAIN'.
ENDLOOP.
ENDIF.
ENDIF.
end of change
ENDLOOP. " it_ekpo.
IF mlctr < 15.
DO 5 TIMES.
PERFORM writeform USING 'LINEFEED' 'MAIN'.
ENDDO.
ENDIF.
added by ganesh for allding line before ECC No.
IF it_ekko-bsart NE 'ZIM'. " IF EXPORT NO NEED TO PRINT ECC.
PERFORM writeform USING 'LIN' 'MAIN'.
PERFORM writeform USING 'WERKS_TAX_DETAIL' 'MAIN'.
ENDIF.
end of change
MFLAG = 'Y'.
PERFORM writeform USING 'TERMS_VAL' 'MAIN'.
LOOP AT it_konv1 WHERE knumv EQ it_ekko-knumv.
mkschl = it_konv1-kschl.
mchgamt = 0.
LOOP AT it_konv_ftr WHERE knumv EQ it_konv1-knumv
AND kschl EQ mkschl.
mchgamt = mchgamt + it_konv_ftr-kwert.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mchgamt = mchgamt * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mchgamt.
IF mchgamt LT '0'.
mchgamt = mchgamt * ( -1 ).
ENDIF.
READ TABLE it_t685t_ftr WITH KEY kschl = mkschl.
PERFORM writeform USING 'TERMS_FTR_VAL' 'MAIN'.
mlctr = mlctr + 1.
ENDLOOP.
mflag = 'T'.
CALL FUNCTION 'HR_IN_CHG_INR_WRDS'
EXPORTING
amt_in_num = mfamt
IMPORTING
amt_in_words = mfword
EXCEPTIONS
data_type_mismatch = 1
OTHERS = 2.
CONDENSE mebeln.
nmebeln = it_ekko-ebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F01'
language = sy-langu
name = nmebeln
object = 'EKKO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
*---- CHANGED BY MATHEW BECAUSE THIS STATMENT WORKING FINE IN 300 BUT NOT IN 500C.
LOOP AT ZTEXT.
IF ZTEXT-TEXT1 IS NOT INITIAL.
PERFORM WRITEFORM USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
MPAY_FLAG = 'Y'.
ENDLOOP.
READ TABLE it_t052u WITH KEY zterm = it_ekko-zterm.
LOOP AT it_t052u WHERE zterm EQ it_ekko-zterm.
IF it_t052u-text1 IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
mpay_flag = 'Y'.
ENDLOOP.
PERFORM writeform USING 'TERMS_COND_VAL' 'MAIN'.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_HDR' 'MAIN'.
ENDIF.
CONDENSE txt.
ENDLOOP.
PERFORM writeform USING 'FTR' 'FTR_LIN3'.
PERFORM writeform USING 'FTR_LIN1' 'FTR_LIN1'.
CALL FUNCTION 'END_FORM'.
ENDLOOP. " It_ekko.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = itcpp
RDI_RESULT =
TABLES
otfdata = otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " Process
*& Form WRITEFORM
text
-->P_0150 text
-->P_0151 text
FORM writeform USING value(p_0150)
value(p_0151).
CALL FUNCTION 'WRITE_FORM'Hi
I think some basis related configuartions to be done
Try like this and inform me
A cyclic job runs, which processes the messages seen in the SOST queue.
Are you sure it's not the frequency of the cyclic job, rather than the
number of messages in the queue, that you are observing? In messages
that are queued and before the cyclic job runs, "wait for comm. service"
is the normal status.
If you mean that there are always 4 items queued in SOST regardless of
the cyclic send job, then I have no ideas. I would have thought there
was no way to do that.
when the send job runs it just never
picks them up & sends them, while it picks up many others. The send job
is somehow blind to these; no error message occurs. In this case, I
'delete' them from the queue (in SOST) and then 'undelete' (drop down
menu -> /Go to /Deleted Items) them and then re-queue them. THEN they
actually get picked up & sent when the next cyclic send job executes.
Regards
Pavan -
Print / Export on web page no longer works for Crystal Report
I am honestly at a loss, for days, the report would allow me to click on the printer icon and print to PDF or export the result of the report, but now, all I get is a blank page when the page refreshes. It no longer asks me for print range or anything. I thought this might be a IE 6 setting, but after reviewing the settings and placing the site in my trusted sites list, I still can't print.Is there a web.config setting I need to know about to make sure that export and print are enabled?
I get no error messages at all, it is as if the button is broke, but I have no way to troubleshoot the innerworkings of crystal xi r2 buttons on the web page. If I could just step though the script it uses that would atleast let me see what is going on, but right now, I am stuck.
Thanks for your help ahead of time.I've went a bit farther than that, I created a virtual directory and placed the aspx file (and its associated ascx and designer files) into that folder along with the report, then I placed a basic web.config file with only crystal required elements within that folder. I disconnected that version of the viewing page from the master web file so that it no longer used a master file, I setup the assembly register at the top under the control section, then I placed the viewer and source on that page. Same end result, the report shows but when clicking on any option, the page is blank but source shows that there is javascript there. My report is not autobound, it is programatically generated from a click of a button.
These were my assumptions:
1) when the report is generated, it is on the page and the session information has everything it needs to know about the report
2) when an option is selected, either clicking on the tree, the zoom, the print or export (or other options), that the view information is passed back during the postback event to the controls so that the report would not have to be regenerated
What I am finding out, at the very least through trials, is that an autobound report, the controls work, but a manual bound report, the pages are blank after selection of any of the listed javascripted items. On top of that, the only time that this seems to be working on a manual bound page is that the page can contain nothing but the report and that the report must be rebuilt on page_load event. Which is not good.
What 'should' be the desired design, is that Crystal writes to a session variable, the report data so that on a post back event, it understands what we want without having to do a full report reload. This would be optional of course because in its current design, each event triggered causes a repost of new data and never last pulled information, so that if there was a change in records, the event pulls the most up to date information. This is not documented anywhere that I have found for web design.
So then, another problem along the same lines has arrisen. As you say, Crystal doesn't play well with AJAX, but AJAX is a requirement for the project and I need to have a progress bar for the report since ultimately the page is waiting on the report to show. Depending on the report and the postback, this could be a while, If it takes a minute for the initial view of the report to show, all events on the page will trigger a full refresh of the report and subsequent pulls will take the same time since the controls don't allow for 'use posted data' instead of 'pull new data'.
Taking your suggestion, I removed the view from the panel and placed it above the panel control. At this point, the tree node script works, the zoom script works, all of the controls in the control colection on the report work, except export and print, those two still do not work. This is with me also placing the call to the buildreport on page_load event.
What is even more troubling, is that not until I had removed the UpdatePanel and UpdateProgress controls from the page completely did the export or print work at all. With the fact those two exist anywhere on the page in general causes a problem. Again, not a desired result. I need a live visual effect for the user that something is going on because some of the reports take seconds while others can take minutes depending on the pull and they need to know that 'something' is going on.
Removing UpdatePanel and UpdateProgress is not an option. -
How to send smartform output through email
Hi,
I want to send smartform output through email.....
can u give me sample program to send it through email......
Regards,
Jenifer
MOderator Message: Basic and Frequently asked question. Please search before posting.
Edited by: kishan P on Nov 26, 2010 11:11 AMHi Jenifer,
There are many threads available on SDN.
Just have a look at this thread
<<link removed by moderator>>
Kindly search before you post.
Regard
Abhii
Moderator Message: You have been warned many times against point-hunting. Continuing ignoring of the Moderator warnings will lead to account deletion. Consider this your last warning
Edited by: kishan P on Nov 26, 2010 11:09 AM -
Forcing 44.1kHz PCM output through SPDIF on XtremeGamer
7Forcing 44.kHz PCM output through SPDIF on XtremeGamerTHi,
My system should be in my sig. ?My PC is only for gaming.
I have a QED Digit Opto DAC that only accepts 44.kHz PCM input over TOSlink. ?However, I can only choose 48kHz or 96kHz in Game Mode from the Control Panel. ?Is there any way to force a 44.kHz output for this card in Game Mode?
If not, given that all I need the card for is the EAX capabilities, which card would I have to buy to gain 44.kHz PCM SPDIF outputCost is most certainly a consideration?this refurbed XtremeGamer only set me back ?28 a month ago.
EDIT: I just updated to Creative Console Launcher 2.6.0.0 from the Control Panel software supplied on the CD, and have managed to get 44.kHz output working successfully in Audio Creation Mode?however, though EAX is enabled in the Console Launcher, games (such as Doom 3) refuse to recognise EAX as being available. ?So, I'm no further forward, except now I now my card is capable of 44.kHz PCM over SPDIF?I just have to force it to output it in Game Mode.
Many thanks,
S.Thanks for the reply, I was getting very frustrated as you can tell.
But I have fixed the issue!! And it is really strange.
The exact option is on AC3 Filter on the main tab. It is called SPDIF (disabled). Checking the box seems to let dolby work. I have confirmed the correct sound output through the correct speakers through a AC-3 test file. AVIs are now outputting a dolby digital sound track through Media player classic.
I do apologise as I've used AC3 Filter many times and assumed it was a 64-bit/X-Fi issue, but really just a bug with AC3 Filter.
Edit: It now seems to work with SPDIF (disabled) ticked or not..... strange.
Message Edited by luckyknight on <SPAN class=date_text>2-24-2005 <SPAN class=time_text>02:57 AM
Message Edited by luckyknight on 2-24-2005 03:0 AM -
Printing Crystal Report decreasing font Size in web.
Printer reduces font:
when we use crystal report`s print button to print report, It reduces original font size....
I am using Crystal report viewer to preview and print the report in which print mode is "pdf". I tried with "ActiveX" mode but its generate error...
I using Crystal Report 13.0 in asp.net2010.Make sure you are on SP1:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
See KB [1218753|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333733353333%7D.do]
Next time, don't forget to search these forums and use the search box in the top right corner of this web page to get KBs, wikis, blogs, etc., etc.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Error when sending report output to printer from Forms 10g
Hi,
I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
Thanks,
Anna
PROCEDURE SEND_TO_PRINTER IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
rep_server system_variables.reports_server%type;
alldone exception;
BEGIN
select reports_server
into rep_server
from system_variables;
if rep_server is null then
msg_alert('Error getting the reports server name', 'I', FALSE);
raise alldone;
end if;
:ctrl.run_report_errors := 'N';
repid := find_report_object('REP_OBJ1');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
IF :ctrl.rg_print = 'P' THEN
--Send the output to printer.
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
ELSIF :ctrl.rg_print = 'R' THEN
--Rich Text Format
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
END IF;
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
null;
ELSE
:ctrl.run_report_errors := 'Y';
msg_alert('Error when running report.' || rep_status, 'I', FALSE);
END IF;
EXCEPTION
when no_data_found then
msg_alert('Error getting the reports server name', 'I', FALSE);
when alldone then
null;
END;If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel. -
Help reqd to display the form output without print preview
Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one t-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.Hi Sankar,
Simply put a parameter statement .
for example.
parameters : vbeln type vbrk-vbeln .
when u ll execute.U ll get the selection screen asking u for the perticular parameter,U input that and execute.U ll get the output as print preview.In the above query i ll input vbeln and ll get the o/p.Similarly u enter Ur getpass no and u ll get the printpreiview as o/p.
Reward if useful.
Regards
Rudra
Maybe you are looking for
-
How to change the privacy statement link url
I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url". I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-busines
-
So a long time ago I accidentally deleted the mail app from my computer. How do I get it back? My computer is an old MacBook running on Mac OS X 10.5.8.
-
HT201205 Problems connecting 5s to ipad via Bluetooth
Cannot connect ipad and 5s via Bluetooth. Both running ios7. Wasted a whole evening with tech support rebuilding both devices with the same outcome. Anyone else having this problem?
-
?? re using IPOD Classic as backup for photos while away on vacation
I bought an 80GB IPOD Classic primarily as a backup storage device for photos while away for 3 months. I have copied about 4 g of songs onto it (using my main computer and ITUNES) and now plan to use it to back up photos using my Laptop (which doesn'
-
wow i bought the ilife to get garageband 4. im getting through all the bugs to bring my gb3 files into the buggy new format and not complaining but after trying to use the new imovie program to set an audio track to video track i realized the softwar