Is it impossible to burn a second copy of a DVD after you have burned the first from iDVD? i am using OS 10.6.8 and iDVD version 7.1.2. the DVD is inserted, then iDVD ejects it, but keeps running as though it is working but it's not.

any help is much appreciated.

thanks guys; but the problem is that iDVD does not want to burn a disk now from the original movie-project. i see the movie project on teh desktop and can launch it just fine - even play it through the iDVD application - but when i click burn, it asks for a disk (I insert a memorex DVD+RDL 8.5Gb 240 minute dual layer) and it ejects it a few seconds later. the IDVD progress bar still runs as though it is burning just fine - its progress drops from 18 minutes all the way to "less than a minute" and then it hangs. even if i insert a different memorex disk, it still doesn't start actually burning it. it only burned the very first memorex disk i inserted successfully. i have tried disk utility to burn from a .dmg file copy of the original successfully burned disk, but disk utility can't burn onto the memorex disk either. maybe something wrong with the super drive? thanks for your ideas.

Similar Messages

  • Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

    Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

    This support document http://support.apple.com/kb/ts4451 relates to the 3194 error. Generally this error has to do with trying to install an iOS that is not the most current. Maybe you tried to jailbreak the phone, or downgrade iOS? Any of this apply to you?

  • How can you close an email after reading without either deleting it or saving it somewhere?  I use AOL and it just goes to "old mail" after you have read the email.

    How can you close an email in Apple iPad after reading it without deleting it.  I use AOL and in their application it just goes to "old mail" after you have read it.  In Apple's email it stays open. Very annoying.

    You cannot actually close an email in the mail app on the iPad. You can tap on the drafts folder or any empty folder that you migh have when you are done reading the email and then the blank white window will appear in the mail app.
    The mail app will always show emails otherwise. That is just the way that it works currently on the iPad.

  • Is there a way to restore a movie clip after you have closed the swf

    Can you restore the state of a movie clip after you have closed it?

    Could you explain more about what you mean by "assign component parameters" because I dont understand. Is this something I would do before it closed? Maybe I failed to explain clearly. i really need some help on this because i have no idea where to start. I have created an app, but I want a user to be able to reopen the app after close and pick up where they left off, or be able to change one thing and not have to start from the begining. I have searched around and cant find information on what i need so Im starting to wonder if that is possible using as3?

  • I bought a 1:1 training package for one year. I'm trying to sign up for multiple training at multiple stores. Is one limitation the fact that you can't book a second group or open training until you have finished the first one? Even if it's different stor

    Hi Everyone:
    My name is Mark. I'm new to the Mac World. I purchased a MacBook Pro with Retina Scan, as I'm going to make multi media self help books (I'm an author and psychotherapist). I have been getting a number of inconsistencies in answers to the same questions.
    1 - Can I do a 1:1 by phone? When I bought my 1:1 the salesperson told me yes.
          Now I find out the answer is no.
    2 - I've started signing up for group, individual, and open training.
    It seems that I cannot sign up for a second one until I have taken the first of any of these trainings.
    So if I want to sign up for 3, 1:1's in 3 different stores, on 3 different days I can't (if I read the terms and conditions properly.) until I have my first 1:1, open, or group training.
    I was told when I purchased my 1:1 that I could have as many trainings as I wanted to, and as much as I wanted. I could even spend a whole day going to different training at the same store on thew same day.
    Have others found inconsistencies in what you are told by sales people and what the rules are?
    Thank you for any help you can give me.
    Mark Dworkin LCSW P.C.

    1) The One-to-One program is in person in an Apple Store. I've never heard of any phone-based training. Perhaps the salesperson was confusing that with AppleCare which extends the phone support on your product.
    2) Here is the relevant part from the official terms:
    Members may have no more than one (1) Personal Training, one (1) Group Training and one (1) Open Training session reserved at any given time. After the completion of your session, you may schedule your next.
    http://www.apple.com/retail/learn/one-to-one/terms.html
    If the saleperson gave you incorrect information that makes the One-to-One service unusable, talk to the store manager and tell him or her what information you were given incorrectly, and ask about a refund of the cost of the program.
    Regards.

  • HT1420 i am trying to authorize my laptop with my apple id.  i have followed the instructions opern itunes store goto authorize computer but i can not find where it says "authorize computer" in itunes?

    i am trying to authorize my lenovo lap top to be able to download my purchased songs from itunes.
    the instructions seem simple enough open itunes store click on "authorize computer"
    i can not find that instruction any where within the itunes menu

    Press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (90835)

  • When trying to burn files to a DVD (DVD RDL from Memorex) an error message appears saying: Impossible to burn the disk because communication failed between disk player and computer (error code 0x80020022)

    When trying to burn files (1,7 GB) to a Memorex DVD, an error messge says: Impossible to burn the disk because communication between disk player and computer failed (error code #  0x80020022).
    Is the Memorex incompatible with my i-Mac or what could it be ?
    My i-Mac is a 21", Core 2 Duo with 3.06 GHz. RAM is 8Go 1067MHz DDR3.
    Thanks.

    That message is usually caused by poor media. i.e. poor coating quality.
    Mermorex is generally regarded by most users here as poor quality media. So is TDK. Most of us prefer Verbatim, Fuji, Maxell or Taiyu Yuden DVD-R.
    Also burn at only 2x or 4x burn speed.

  • I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down

    Elements 10 was deactivated on desktop and installed on new laptop.  Have on
    y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
    I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
    help!?

    I am using photoshop Elements 10 under the create tab...slide show.
    Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago.  Had not used it other than for photo editing until today.
    I can also not login in thru the program. It simply spins and I finally had to force close the program
    Toni V. Sloan
    Sent from my iPad
    On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
    I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    Photoshop doesn't do slideshows… What software are you using?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

    I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

    Probably because they don't accept that media.
    Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

  • I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite.  I want to create one movie that includes these short movies that I can then either burn to a DVD or show in iMovie's Theater.  How can I do it?

    I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite.  I want to combine those short movies into one movie that I can loop and burn on a DVD or show in iMovie Theater.  How can I do it?  The movies are now shared to iTunes.

    Another easy way to fix this.
    What I've noticed is that upon upgrading your projects and events to work with iMovie 10, initially it will work... Until you quit iMovie and reopen it again. Any events with hashtags will show up without the star next to the iMovie event. SO, if you happen to read this, after upgrading to iMovie 10 from its predecessor, immediately change the event name to NOT include a hashtag/pound symbol.
    Otherwise, if it's too late, you can either do the above or this...
    Hold down option and click on iMovie. This will prompt you Locate, Create a New Library, Cancel this window, or Choose a different library. What you want to do is create a new library, call it whatever you want to, this will only be temporary. After the program opens, it should be a blank Library. Then go to File > Open Library > iMovie Library (your original library) and proceed to change the name of your events. Quit the program. Go into your Movies folder in Finder, delete the library you temporarily created, and your back in business.

  • After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes

    After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX

    Have you revieved this support document?
    TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    tt2

  • I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    Reset the SMC, as per > Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then retry the Disc Drive.

  • I have downloaded the iPhoto apps..then it comes up to the accept button hit accept won't do anything

    I bought a second hand macbook pro...i have upgraded the osx to mavericks 10.9 no problem, then i tried downloading iphoto it comes to accept button when i hit accept and my password it wont do anything...

    What version of iPhoto do you have? What exactly does happen? What error messages do you get? Is this while downloading and installing from the App store?
    Or aftwperwards when you try to launch iPhoto?
    LN

  • I saved my Form Central spreadsheet file once as a excel file but it will not allow me to save it a second time as an excel file.  It says that I cannot complete this action because the file me be open in another application, but it is not open in another

    I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file.  I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem.  Thank you. Jeff

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Please help. My facebook app will not open on my iphone 4. I deleted it,numerous times and downloaded it again. It uploads, but when you click on the icon, it flickers then closes.  Help.

    Please help. My facebook app will not open on my iphone 4. I deleted it,numerous times and downloaded it again. It uploads, but when you click on the icon, it flickers then closes.
    Help.

    Then the next step would be to restore your phone.  My advice is that prior to restoring you import your photos and videos to your computer and back up your contacts (by syncing them with iCloud or to a supported program on your computer using iTunes) as a number of users report losing these when restoring their device.

Maybe you are looking for