Is it normal for my DL speeds to drop in half while streaming video off media server with E4200v2?

I am on a 3MB plan and i noticed DL speeds drop quite a bit while the streaming from the media server? is this normal?
Also my Linsys ATA is on a static IP and when I review in Devices it will show offline though someone could be talking on the phone. What would be causing this?
Kind of new at all this stuff. Thanks in advance.

There's a whole bunch of articles on the internet on DSL PPPoE MTU. If you google "DSL MTU 1492", you'll probably find a lot better explanations than what I can give you.......
If you want to run the test in the link below, you'll find that 1464 is the mtu without fragmentation. Then you add 28......and you'll get 1492.
http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=386

Similar Messages

Is it normal for your download speeds to drop as l...

I'm getting a range of speeds atm as I'm coming up to my first week. Since Friday it's ranged from 8mbps to 37mbps. Is it normal for it to go as low as 8mbps? Also, my ping has ranged from 18ms to 44ms. Is this also normal?

Thanks for the info, btw.. I had a powercut in my area earlier today, so my internet was down for about 2 hours. Now it's back on, does the 10 day period restart? As I remember the engineer telling me that I shouldn't turn the hub/router off during the next 10 days, but obviously this was out of my control.

HT202157 New apple is not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.

I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
Not able to connect istores and itunes.
I cannot do software update. Can anyone help in this content?

Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
I tried using Netwrok testing but its giving same error.

Hi, is it normal for macbook pro to get heated after watching a 1hr video

hi, is it normal for macbook pro to get heated while watching videos?

quite normal.......make sure when your watching a video, no other apps are running in the background...

HT204400 I have an old single 2.4 ghz router. If I upgrade to a new high speed router will I get better streaming video?

I Have an old single 2.4 GHz router. If I upgrade to a new high speed router will I get improved streaming of videos?
thanks.

It depends on what's rate limiting - if it's your wifi maybe, if your internet connection is slow the router won't make a huge difference though some products are better with poor lines.
Can you hook up a laptop to the router via ethernet and test the internet speed via speedtest.net?

Is normal for the ipad get hot on the back while in use?, Is normal for the ipad get hot on the back wile in use?

I have an ipad, when is being used it gets hot on the back, is that normal?

Warm is normal. The processor and battery generate heat. 'Too hot to handle', quite literally, is a good rule of thumb for when to stop using it and make an appointment to get your device checked out.

Is it normal for iPad Air 2 to vibrate when playing music, watching video, playing game, or anything related to the sound?

I just bought my iPad Air 2 and it is vibrating when do anything related to sound. I want to know is it normal or just me? should i bring it back to Apple Store?

A number of people have reported having vibration problems. One thread below. I'd bring it back for a different one or a refund if you're dissatisfied.
Re: iPad Air 2 sound vibration

Is it normal for the 4s to get kinda hot when running apps/ video recording?

Any know? Hope it's not a hardware issue.

It's normal to get pretty warm when running hard, i.e. video or some apps. If it gets too hot to touch, that's not normal.

I have a customer looking for a high speed vision system 500 fps. Anyone been successfull (or not) with this kind of application with NI hardware?

Stu

The digital boards can handle these high frame rates as long as the bytes/sec is within specs of the board, as Bruce mentioned. The question is still what you want to do with these images. You mentioned memory storage, how much memory will it take? The 1424 can have 80MBytes of onboard memory, so you could store it all there and then bring it to the host computer at your convienence. If you bring it directly to the host computer, keep in mind the maximum sustained bandwidth of the PCI bus is about 100 MBytes/sec and if you have 3 digital boards outputting data, this could be a limiting factor (overhead of the three boards communicating on PCI may reduce bandwidth also). Make sure you have plenty of RAM to hold all this data if you do bring it directly to t
he host computer. Graftek is very good at recommending specific cameras and Robert Eastlund with www.graftek.com (a imageing alliance member witrh NI) has done these type of applications before and could give you more specific advise.
So in summary, our boards should have no problem withg high frame rates as long as the cameras meet our specs (pixel clock of 40MHz max and the new 1424's have a 100MBytes/sec max data transfer)
Hope this helps,
Brad Buchanan
National Instruments

My internet speed keeps to be occupied when streaming video and closing the broswer!!

My internet speed is fully occupied when streaming a video and going to different points in it (walking through it) then close the tab the speed still occupied even if I close the broswer !!!! (also tried on firefox and chrome), Iam running fresh installation of windows 8.1 enterprise (updated) and my browser versions "firefox 29, chrome 34.0.1847.131m" and flash player 13,0,0,206 and only way till now to stop this is to disable and then re-enable connection from network and sharing center in windows . what's wrong! what should I do?

What you NEED to understand is that Flash Player is ONLY a plug-in for your browser.
It ONLY functions when there is Flash content in a page and ONLY when that content is called into play by a user action (you clicked Play or visited a page where the content was set to "auto play").
If your system is downloading data AFTER you've closed the browser (and subsequently terminated the plug-in), whatever is causing that download is OUTSIDE of your browser and OUTSIDE of Flash Player.
Think of it this way. You have a Blu-Ray movie playing and suddenly... there's a loud screeching sound coming from your stereo. So you stop the movie - the sound continues. You eject the BR disc - the sound continues. You disconnect the BR player - the sound continues. You turn the TV off - the sound continues. You disconnect the TV from the stereo - the sound continues. The sound CANNOT be coming from a source that is completely disabled. Flash player is like the BR Player, your browser like the TV. The data download is like the annoying sound. Something in your OS... be it a setting or even malware... is causing the download of data because a terminated browser and a terminated plug-in cannot cause it.

When I connect my iPad2 to my tv using the AV adapter I can hear sound for everything else except for my movies. I can hear tv shows, music, videos off YouTube, etc. I just can't hear the movies. Any ideas of what may be wrong?

When I connect my iPad2 to my tv using the AV adapter I can hear sound for everything else except movies. I can hear tv episodes, music, YouTube videos, etc. anyone have an idea of how to fix this issue? Thank you for your help in advance.

Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Speed tests say 6-7Mbps, but can't stream video

I have a brand new BT Home Hub 3, connected to the main socket, through an i-plate and I am on the Option 3 upto 20Mb broadband package.
When I run a speed test I typically get 6-7Mbps which whilst rubbish compared to the 'upto 20Mbps' I am paying for should be sufficient. However sometimes if I try to watch BBC i-player on maximum resolution through my PS3 it stops and loads every few seconds. I know streaming high resolution video is fairly demanding, but not that demanding, I am not doing anything else at the same time so I think 6-7Mbps should be plenty. This only happens sometimes, but if I am trying to watch a film around 08:00pm on a 'school night' it happens more often than not.
If I drop the resolution it normally settles down, so I guess I am right on the edge of what it can handle, and I have a sort of 'work around'. But I am paying for the top level of broadband BT offer (they haven't put fibre optic in my exchange yet) and have the top level of kit BT supply, and I am not asking for the moon on a stick, just BBC i-player on top resolution.
I am normally connecting the PS3 wirelessly but I always have 100% wireless signal when I check on the PS3, the Hub and PS3 are less than 3m apart, in the same room, with nothing between them and no kit that could be causing interference (except for the Plasma TV near the PS3, but it wouldn't be much use if it wasn't connected to a TV!) and a couple of times I have had the same problem when I have connected them through an ethernet cable to check. I have seen a few bits of guidance saying try a differnt channel, but I think the Hub 3 does this for you automatically.
I think sometimes when you stream video it takes a few seconds for BT to realise that you need more bandwidth and open your pipe up a bit - I am used to the video pausing and buffering a few times in the first minute then settling down - but this can go on for a whole hour.
Please could someone step me through the diagnostics I should do as a first step. I don't know much about routers but I am prepared to go in a play with settings if someone who knows what they are doing will hold my virtual hand.

1. Best Effort Test: -provides background information.
Download Speed
6.02 Mbps
0 Kbps
7.15 Mbps Max Achievable Speed
Download speedachieved during the test was - 6.02 Mbps For your connection, the acceptable range of speeds is 2 Mbps-7.15 Mbps. IP Profile for your line is - 6.18 Mbps
2. Upstream Test: -provides background information.
Upload Speed
932 Kbps
0 Kbps
832 Kbps Max Achievable Speed
Upload speed achieved during the test was - 932Kbps Additional Information: Upstream Rate IP profile on your line is - 832 Kbps
We were unable to identify any performance problem with your service at this time. It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly. If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
We have identified that you have additional services enabled on you broadband line, please click continue to run advanced service tests.

How to Use Team Foundation Server With SharePoint 2013 For Development

Hi All,
As i am new to team foundation server and i want to use team foundation server for our development. Please give me good startup point.

Hi,
If you wanted to integrate Team Foundation Server with SharePoint 2013,
there are two articles for your reference:
http://dumians.wordpress.com/2013/04/01/integrate-team-foundation-server-with-sharepoint-2013/
http://nakedalm.com/integrate-sharepoint-2013-with-team-foundation-server-2013/
By the way, you can also post the question in in Visual Studio Team Foundation Server forums and more experts will assist you.
Team Foundation Server – General http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsgeneral
More information:
SharePoint Products requirements for Team Foundation Server:
http://msdn.microsoft.com/en-us/library/hh667648.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

HP Media Server or MacMini for home media server

I am torn between the new HP media server with Windows Home server or a MacMini for my home server.
Can anyone provide insight on which would be better?
I am looking to store all my media, data on either one. I.E. Pictures, Music/Video - to stream to AppleTV etc.
Thanks in advance.

Hi,
I know you have already marked the question as solved, but if you are still torn between the HP or Mac Mini here is what I did.
Although the HP has more storage space, I went for the Mac Mini option because; the foot print is smaller if you want to put under a TV, it uses less electricity and I felt Mac OSX was a more stable platform to work with.
The Mac Mini use a 2.5" Sata drive, so you are limited in upgrading past 320GB. There is a 2.5" 500GB drive out however I don't know if it will fit as when I read about it six months ago the article said it is slightly thicker, but I could be wrong.
To get around the problem of storage space, I attached a 1TB SATA hard drive via Firewire, which cost about £120. Although there are cheaper 1TB hard drives around, I went for one with an Oxford Chipset as it is always going to be on and I didn't want it to fry out.
I connect to the Mac Mini remotely to manage it. It's dead easy to set up file sharing, and I ended up giving my brother and dad there own storage space that they can log into with a username and password. One uses XP and the other uses Leopard.
The other great thing is you can configure iTunes and system preferences to automatically rip a CD or DVD and add it to the library then eject automatically when it is done. This may be obvious but it is incredibly useful feature, as it saves having to rip it on your personal computer then transferring the files.
The streaming capability of the Intel Core Duo is really good, so far we have been able to get it to stream to the AppleTV, 2 MacBooks and 1 Sony Vaio, while converting an avi movie to MP4 through Visual Hub, it might be able to handle more iTunes streaming we just ran out of computers to test it with.
Hope this helps in any decision making.

Is a 2,4MB/sec speed in a wi fi ad-hoc mode normal for G-410m-mm?

Hello!
Is a 2,4MB/sec speed normal for copying a 20gb file from a Vista x64 with Zyxel G-202 EE to G410m-mm through a wi fi in ad-hoc mode? Why is the 2,75MB/sec speed in the oposite direction higher?
Regards,
Dmitry
Message Edited by di on 10-26-2008 07:23 AM

Hello Dmitry
Try manually atjusting your connection mode maually in device properties in device manager.
//help will save the world

Is it normal for my DL speeds to drop in half while streaming video off media server with E4200v2?

Similar Messages

Maybe you are looking for