Is It possible connect two router**from console port to console port

Hi,
I need this for doing reverse telnet.
Thanks very much

No
you can connect router 1's aux port to router 2's console port.
line aux 0
password blablabla
login
modem InOut
transport input all
find the aux port's line number which depends on the router model then telnet to a live ip on router 1 on that port.
Worc_3640#sh line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
0 CTY - - - - - 0 0 0/0 -
129 AUX 9600/9600 - inout - - - 0 0 0/0 -
* 130 VTY - - - - - 75 0 0/0 -
so say 10.1.1.100 2129 if 10.1.1.100 is on that box.
should get you going..
Chris

Similar Messages

  • Connecting new router from Verizon

    We just received a new Actiontec router from Verizon. Plugged in power cord and phone line and can not get a connection. What am I doing wrong? On the last router (Westell) we did not have to have an ethernet cable to use the router and I assumed we didn't need to do that with this router either.  Can anyone tell me what I'm doing wrong?

    Are you having a problem with the DSL modem synching up or connectly wirelessly to your computer?

  • 2008 R2 SP1 failover cluster, after connect to VM from failover cluster manager console I've get only upper quourter of screen console

    Hello :)
    I have to ask because this issue is boring me a long time ago :(
    From time to time when I connect to virtual machine from failover cluster manager console I've get virtual machine connection screen (console) which is reduced only to upper left quorter of full screen. There is no scroll bar ... If I live migrate
    VM to another node (or restart VM on same node) and reconnect, console screen is displayed ok (ie all console screen is visible).
    It is happening regardless of OS version installed into guest VM: 2003 R2, 2008 R2, 2012, 2012 R2).
    I've check inside VM ( I can see that integration services are installed and running but when I click onto console window with mouse I've get message:
    "Virtual Machine Connection
    Mouse not captured in Remote Desktop session
    The mouse is available in a Remote Desktop session when
    integration services are installed in the guest operating
    system...."
    From SCVMM console I can see that IC version on guest VM is: 6.1.7601.17514
    I would like to know what is going on and is there any way how can I detect those situation or even better how to prevent it ?
    Thank you for any idea.
    Best regards
    Nenad

    Hi Nenad,
    As you mentioned you have tried 2003 R2, 2008 R2, 2012, 2012 R2 guest vm, but all this do not work properly, With Server 2003 platform the 2008r2 Hyper-V the 2003R2 are not
    supported, in your case you must update to Windows Server 2003 R2 with Service Pack 2.
    Server 2012 as guest vm on 2008r2 you must install the following hot fix:
    You cannot run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
    https://support2.microsoft.com/kb/2744129?wa=wsignin1.0
    Server 2012 is the last version of Windows that will be supported as a guest operating system on 2008r2 Hyper-V therefore the 2012r2 guest vm is not supported.
    Please use the following command can query all guest vm’s IC version, please compare this problematic vms IC version with functioning vms.
    The following powershell command can be used to display the version of integration services installed on all VMs on the Hyper-V host:
    PS C:\Users\administrator> get-vm | ft name, IntegrationServicesVersion
    Name                                                       
    IntegrationServicesVersion
    TestVM2012                                           
    6.2.9200.16433
    SQL01                                                    
    6.2.9200.16433
    SQL02                  
                                      6.2.9200.16433
    SCVMM01                                               
    6.2.9200.16384
    SCVMM02                                               
    6.2.9200.16384
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Connect two users from one Mac/PC to one Time Capsule.

    Hi all,
    after spending the last 1.5 hours on Google and this Community, I have found tons of possible solutions but none worked for me. Here's my setup:
    Time Capsule (2 months old) with FW 7.6.1
    TC is attached to router/modem box. As I'm using the DHCP server in my "internet" box, I have the TC connect in bridged mode.
    TC has file sharing active, secured with accounts.
    I'm using AirPort Utility 6.1 to set the TC up.
    I have two clients (for now) that I want to connect to the time, a MPB (OSX Lion) and a Windows 7 Desktop. Generally, connecting to the TC with MBP works without any problems:.
    The only problem I have with the Mac is that there doesn't seem to be a solution to connect to two accounts at the same time from one machine.
    Now here's my real problem. When trying to access TC with my Windows PC, I couldn't get it to work with just mounting a network drive. I installed Airport Utility for Windows and with this I can connect to TC, but only the account that is currently connected on the MBP.
    To summarize:
    Is there a way to connect multiple accounts at the same time, both on Windows and on OSX?
    Thanks in advance and let me know if more information is needed.
    Georg

    Waiting any Idea,
    CREATE USER data_history IDENTIFIED BY test;
    CREATE USER data_current IDENTIFIED BY test;
    CREATE USER middle_layer IDENTIFIED BY test;
    CREATE TABLE data_history.sales_order_head_h;
    CREATE TABLE data_current.sales_order_head;
    CREATE ROLE historical_data_reader;
    CREATE ROLE historical_data_loader;
    CREATE VIEW data_history.sales_order_head AS
    SELECT * FROM data_current.sales_order_head
    UNION ALL
    SELECT * FROM data_history.sales_order_head_h;
    GRANT SELECT ON data_history.sales_order_head
    TO historical_data_reader;
    GRANT INSERT, UPDATE, DELETE ON data_current.sales_order_head
    TO historical_data_loader;
    GRANT historical_data_reader TO middle_layer;
    GRANT historical_data_loader TO middle_layer;
    connect to middle_layer;
    sql> select * from sales_order_head;
    not working
    sql> insert into sales_order_head;
    not working too.
    hope you can help.
    regards,

  • Access machines connected to router from machine connected to hub

    I have a DSL modem connected to a Linux firewall.
    The Linux firewall and numerous other machines are connected to a 100MB hub.
    This configuration has worked fine for many years.
    I purchased a Linksys WRT54GS for the wireless & 10/100 switch capabilities.  I have the Linksys connected to the hub via the hub's uplink port.  I have one wired and one wireless machine (both Windows) accessing the Internet just fine via the Linksys.  I can ping a Linux development machine connected to the hub from one of the Windows machines connected to the Linksys.  However, I cannot ping the wired Windows machine (has static IP address) nor the Linksys itself.  I am unsure if the Linksys is not responding to pings & not allowing them to go through to the connected machine, or, if I need to modify my firewall/gateway somehow.
    Any thoughts would be appreciated!
    Thank you kindly!

    Thanks for the reply!   I am just now getting back to this as it dropped in priority for a while.  My development box(es) on the hub is in the range of 192.168.3.x and the DHCP server on the Linksys WRT54GS dole out 192.168.4.x.  I am thinking I need a route configured either on the Linksys or my Linux gateway - does this make sense?
    Thank you!

  • Is this possible without PBR - Routing from Specific Host to Any

    Hi,
    I have an issue where I don't currently have PBR options on my core switch. Now I know I can amend the SDM template and enable the routing one then reboot (I'm also runing ipservices). At the moment though this is not an option.
    I have a host - 10.44.129.34 /24 which is a VM.
    Current Gateway is 10.44.129.1 which is SVI on our Core.
    On the Core I'm looking to say -  anything from this specific host going to any remote network - use gateway 10.44.157.6. Is there a way for me to achieve this without PBR?
    I cannot amend the IP of the host IP either due to licensing issues with the software I can;t think of a way to do this without PBR.

    You can identify the traffic with an extended access list. But I can not think of anything you could do with that to achieve your objective other than PBR.
    HTH
    Rick

  • We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a  non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?

    We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a  non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?

    No, not all network clients -- only the two mac portables and they run together very rarely. The windows machine is hardwired to the modem router combo, and that's always sailing smooth. The mbp that is most used is perhaps 20 feet max from the router - and in another room. But it also happens when I take in into the same room as the router. On occassion, I have noticed while using network diagnostics, that one digit in the IP number sometimes appears to go awry. I then try to set up manually - and it works for a bit but is hugely erratic.
    I rigged a hand me down airport express and set up a separate network for the two macs and it ran beautifully for some weeks, but that little piece is now dead and none of the retailers in my suburb seem to have one in stock. I don't want to be forced to buy an airport extreme and here in India, there's no trustworthy online ordering option.
    The man from the ISP's been here several times and I don;t think it is a modem/dsl issue because the smartphone connects and the macbook drops when both are the same distance from the router? I am truly foxed and intensely irritated! :-(

  • How can two networks from the same router be showing up at once?

    Very confused here.   I hooked up the linksys wrt54g and obviously it showed up as an available network.  It is hard wired into one computer.  
    I then (on an unwired computer) went into the router to rename the network and reset the password.  
    Now, when I check for available networks, both are present (linksys and the renamed one)?  How can this be?
    Also, the linksys network has five bars connectivity and the new one I renamed only has two.  How is that possible?
    Thanks

    1. Always configure your router from a wired connection. Never through a wireless connection. The wired connection is the only reliable way to be sure your configure your router and not a different one.
    2. Vista and Windows 7 allow you to name a wireless connection different then the "SSID" used on the router. It also allows you to set up two wireless connections using the same SSID. Clean up the list of preferred networks on your computer. That should take care of this.

  • Connecting 2nd router, separate from main router

    Hello.. I've been searching the forums for a bit and can't seem to find an answer to this, so I figured I'd start up a thread.. I have A WRT54G connected as the main wireless router in my house. Today I purchased the WRT600N with hopes of connecting it to the same internet connection as the WRT54G but as a completely separate router.. I've spent all day trying to configure it and get a connection with a different IP as the the first router but have yet to accomplish this.. I get to the point where I have a connection to the second router and it has its own IP and everything, but the internet doesn't work.. I was hoping someone could either help me with this or point me in the right direction to find a way of accomplishing this. Any help would be much appreciated. Thanks. Forgot one thing, not sure if it matters though.. The computer that is connected to the first router is a PC running XP Pro and the computer I'm trying to set up on the second router is a Macbook..
    Message Edited by Nupy on 04-27-2008 09:24 PM

    What do you mean with "completely separate router"? You cannot completely separate two routers if one hosts the internet connection. The internet connection of the second must run through the first. The LAN of the second can always access the LAN of the first. That's pretty much inevitable with these cheap routers.
    Thus, to complete separate two routers/subnets you actually need three routers, one that hosts the internet connection and two connect to the first. Each of those two additional router LANs are then separated as long as the access to the first main router is well secured.
    Unless you have very serious reasons to run two subnets I would always recommend a single LAN setup like this.
    Other then that I have described possible two router setups here.
    If you want to chain the two routers then you have to set them up like this:
    1. router
    WAN - setup for your internet connection, e.g. PPPoE or DHCP.
    LAN IP 192.168.1.1
    Subnet mask 255.255.255.0
    DHCP server enabled if required.
    DHCP server address pool default 192.168.1.100-149
    Check the Status tab of the 1. router to make sure that it has a working internet connection. Write down the DNS server addresses you find on the Status page.
    2. router
    Internet port of the 2. router is connected to a LAN port of the 1. router. You can only make this wired connection AFTER you have configured the second router. Otherwise you may not be able to access the web interface.
    WAN - Static IP
    WAN IP 192.168.1.2
    WAN subnet 255.255.255.0
    WAN gateway 192.168.1.1
    WAN DNS 1,2,3 enter either 192.168.1.1 or the DNS server addresses from above.
    LAN IP address 192.168.2.1
    LAN subnet mask 255.255.255.0
    DHCP server if required
    You have the choice to set the DNS server IP addresses in the DHCP server if you like.
    Don't forget to save the settings on the Setup page.
    Once you have reconfigured the second router like this you can connect it to the first.
    Make sure that the second router is on Gateway mode on the Advanced Routing tab.
    This setup will separate the LAN of the second router from the first. This means you cannot access the LAN of the second router from a computer connected to the first router. However, anything connected to the second router is able to connect to anything connected to the first router. This is much all the separation you'll get with these routers.

  • What happen when we connect Two PC with IP from Same subnets

    Scenario 2nd : What happen when we connect Two PC with IP from Same subnets. PC1 -192.168.10.1/24 PC2 - 192.168.10.2 on a two different L2 Switch on different vlans which are connected via a LAN cable.
    All ports are access ports
    Interview Question : No More Info.
    Pc1<SwA>------<SwB>PC2
    Q.1 Will they communicate If yes what will be packet/frame flow.
    Q.2 If not where will be the packet/frame drop. ? Why.
    I need step by step if possible plz how the packet moves , vlan taggings n all internal works that happens behind .. plz 
    thnx in advnce ....

    Hi Abhishesk,
    The PCs should communicate each othet.
    Since there is no trunk port involved, there is not tagging involved.
    Since both the PCs are into the same subnet. PC1 will not need default gateway for the communication with PC2. So PC1 will start with sending ARP request for PC2 MAC address.
     Since all the ports in SW1 are in same VLAN, the ARP should reach all ports including the switchport where SW2 is connected to.
    Sw2 has got a complete different access port on ALL the switchports. Sw2 will receive the ARP from Sw1. Remember that there is no tagging for the frame. Hence Sw2 will again send the ARP packet to all the ports which belong to same VLAN wherein the packet is received. ie, Sw2 will send the ARP packet to all the ports in Sw2. PC2 will also get the the ARP.
    The ARP reply will make it way back using the same logic.
    Now both the PCs can start the actual packet exchange.

  • Connecting two WRT54GS to the same (wired) router (non-linksys)

    Due to some security issue I have to connect two WRT54GS to the same wired router.
    Do I connect the first WRT54GS to one port of the router and the second one to another port?
    And is the connection on the WRT the ethernetport or the internetport?
    And can I reach both the configuration screens or do I have to change the
    adress of one of them to e.g. 192.168.1.2 ?
    Regards,
    hENK.  

    I will suggest you to connect the LAN port of wired router to LAN ports of both WRT54GS  ........  Th connectino to WRT54GS is Ethernet Port ......
    Regarding the Ip address of WRT54GS ..... change the Ip address of first wireless router from 192.168.1.1 to 192.168.1.2 ........make the DHCP service disabled ....
    For the other router the Ip address would be 192.168.1.3 ...... DHCP service again disabled .........
    For accessing the set up page of both router use the new Local Ip address.........on the explorer address bar ......

  • How doi unistall itunes from an iphone? By accident we connected two phones to the same itunes account. So now whenever one downloads something, both phones receive the download.

    How do I uninstall an itunes account from an iphone? By accident we connected two phones to the same itunes account and now whenever we download both  phones receive the download.

    Settings > iTunes & App Store > Automatic Downloads > switch off what you don't want here

  • Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi...
    The issue is that your credit or debit card credentials must be associated with the same country where you reside to make purchases.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    Billing policy is the same for both the iTunes as well as Mac App Stores.

  • Is possible to transfer photos from a macbook pro to an iphone without itunes or an internet connection?

    Is possible to transfer photos from a macbook pro to an iphone 5 without itunes or an internet connection? I'm a pro photographer and I need to transfer photos from my camera, edit them, copy photos to my iphone and send via 4G network to an editor. I will be in a location without internet access and my old computer itunes wont sync with my new iphone 5. I can't upgrade the computer right now because I need some of the old software.  Thanks.

    Some decent suggestions for apps to do this in this thread:
    http://apple.stackexchange.com/questions/52332/how-to-transfer-a-file-from-iphon e-to-computer-when-there-is-no-internet

  • Wi-fi bridge between two routers TP-LINK WR841ND (WDS).  HP 1536 dnf MFP connect to one of this routers (copper).  My Ipad or Iphone can't find HP 1536 dnf MFP (using Eprint). Ipad and iphone connect   to router across WiFi.

    Hello.
    I have wi-fi bridge between two routers TP-LINK WR841ND.
    The name of this technology - WDS.
    HP Laser JET 1536 dnf MFP connect to one of this routers (copper).
    Second device (my NETBOOK) connect to second router (WiFi).
    I have good communication between NETBOOK and HP Laser JET 1536 dnf MFP via WiFI-bridge.
    In usual case NETBOOK can find (and can Ping) network printer and make a print some files.
    But my Ipad or Iphone can't find HP Laser JET 1536 dnf MFP (using Eprint). Ipad and iphone connect
    to router across WiFi.
    Please, help!

    Are you using the ePrint Mobile App, the ePrint Printer Control App, or just trying to send an email to the printer's ePrint email address?
    Does AirPrint work?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • HT1335 how do i get music to sync to my ipod

    i recently got my computer redone ...and when i got it back , it will let me sync my music to my ipod or pull up the music that is on my ipod and im not sure what to do to make it ..

  • Can I have 2 roll over triggers in the same space.

    Is possible to have 2 roll overs in the same space.  I would like to have the user roll over a given space and have an image appear in one area and a text box display in another.  Currently it seems only the top trigger is recognized by the system.

  • Micro USB to HDMI adapter support on Encore 2 WT8-B-102

    I would like to know, if there is any chance to connect this tablet to TV/Monitor through the micro usb port by attaching a micro usb to HDMI adapter? If yes, is there any specific adapter being compatible with this Tablet device? Thanks for the supp

  • CRM 2007 - Best Practice C72 - FTP & HTTP Destinations

    Hi Gurus I'm busy with configuring our Internet Sale and am now stuck on this issue. In C74 under Index 3.1.2.1 3.1.2.1                Creating RFC Destination for FTP and HTTP When I run program RSFTP005 the 2 destinations are created perfectly. Whe

  • Update z table from bdc

    how can i update a z table created ( ZTEST ) using a BDC with the entries from a selection screen