Is it possible for a background program to produce TIME_OUT Dump?

Hello Experts,
When i have analyzed the Dumps using Tcode ST22 in my production system, I found many dumps.
My doubt is that, is it possible for a program scheduled to run in background to produce TIME_OUT dump?
I faced a scenario like this. What could be done to avoid this?
Can this be because of some settings problem? If so, what kind of settings has to be changed?
Thanks and Best Regards,
Suresh

Hi,
As far as time out for Background programs are concern I think there is no time out for programes executing in background
First try to improve performance of your program like read with binary search , create table index etc.
Then consult basis ppl in this regard they can set big time out slot so that your probram will not go into dump.
Regards
Bikas

Similar Messages

  • I was downloading add-on themes and apparently signed up for background program. it has taken over my computer and I want it off now.

    I was adding themes from Firefox and signed up for the "background" program. It has put a slide show on my computer and I want it off NOW. How do I remove it because I don't even know how to get to it? It showed a wooden floor to start with and now it showing horrible pictures that I never picked out.

    Did you install a persona?
    You can uninstall your current Persona and revert to the Default theme (Tools > Add-ons > Appearance/Themes).
    See:
    * https://support.mozilla.com/kb/Using+themes+with+Firefox
    * http://kb.mozillazine.org/Themes (Lightweight theme)
    *http://kb.mozillazine.org/Uninstalling_add-ons
    *http://kb.mozillazine.org/Uninstalling_toolbars

  • Background job for Standard (T-code F.80) and Background Job via Submit (for same standard program) provides separate spool layout

    Hello Experts,
    I am using SUBMIT Program to execute a standard T-code (F.80).
            SUBMIT sapf080 WITH SELECTION-TABLE rspar
                                         AND RETURN.
    When I execute the program in background and compare it with F.80 and execute it in background too, spool layout for both are different.
    For F.80, It is more detailed with every info like doc number, company code and fiscal year with messages, but for my program only messages are displayed in the spool which is getting unconvinient as I don't know for which document number that message was generated.
    Can you please suggest why am I getting 2 different spool layouts for the same program executed in 2 different ways.
    Thanks,
    Ankit Khanna

    Hello,
    Thanks for your replies.
    I have added a list option along with SUBMIT statement to get similar spool layouts.
    Below piece of code will solve the issue.
              DATA list_tab TYPE TABLE OF abaplist.
            SUBMIT sapf080 WITH SELECTION-TABLE rspar EXPORTING LIST TO MEMORY
                          AND RETURN.
            CALL FUNCTION 'LIST_FROM_MEMORY'
              TABLES
                listobject = list_tab
              EXCEPTIONS
                not_found  = 1
                OTHERS     = 2.
            IF sy-subrc = 0.
              CALL FUNCTION 'WRITE_LIST'
                TABLES
                  listobject = list_tab.
            ENDIF.

  • Is it possible to create a program for embedded system

    Is it possible to create a program for embedded system?

    Yes. Many solutions.
    1 = http://jcx.systronix.com/
    2 = http://www.harbaum.org/till/nanovm/index.shtml (see links to Asuro)
    And many more but I'm too lazy too look them for you ...
    Dan

  • Is it possible for a 3rd party program to create a list item in sharepoint online 2013?

    I have limited experience with the online version of sp. I've been asked if it's possible for a 3rd party app that our company is beginning to use, to programmatically add items to a list.    I don't have any details about the program yet,
    but I've been told that a batch would run at night and they would like it to create items in a SP list and pass along several fields of metadata.   
    Is this possible in the online version?   I know that Power Shell can do this, but is it possible for an app to get access to run a PS command?   
    thanks,

    Yes.
    There is something known as the Client Side (?) Object Model or CSOM. This allows you to create list items, lists and even sites with .Net code from a non server machine.
    You could run 'classic' Server Object Model  C#/VB.NET or PowerShell to do the same job and it might be easier as there's alot more material out there on how to do it. On the other hand it's probably going to make your solution more complicated and
    harder to maintain over the long run.
    This article introduces you to the CSOM and how to use it and is applicable to O365 as well as on-premise:
    http://msdn.microsoft.com/en-us/library/office/fp179912%28v=office.15%29.aspx
    As an alternative you can look at the REST API which allows you to use web services to interact with SharePoint.
    http://msdn.microsoft.com/en-us/library/office/fp179912%28v=office.15%29.aspx

  • F-32 possible for bdc program.

    Hi experts...
    F-32 - CLEAR CUSTOMER, is it possible to write bdc program for uploading.
    If it is possible then what is the procedure to be followed.
    if it is a full clearing or partial clearing against vendor open items?
    Thanks in advance.
    Arvind nn

    Hi,
       Cleared customr/vendor data stored in BSAD/BSAK table. Clearing is different process which is done by functional consultant. Once clear the vendor/custome then only data stored in tables. Partial clear data doesn't contains on these tale. So i m also not confirm that whether we write the bdc program for these tcode. But i don't think we will write the bdc program for clear document.
    Regds,
    Rakesh

  • I am creating a video using the green screen option- I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

    I am creating a video using the green screen option in iMovie.   I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

    To enable this right you need Acrobat, not the free Reader.
    However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

  • Is it possible for Windows 2008R2 Domain Controllers to audit when a programs are installed/uninstalled on clients and send alerts to Admins?

    We have a program called Audit Wizard that we used with Windows 2003 that monitored all clients and alerted my department when a program was installed/uininstalled. since upgrading to windows server 2008R2, the program no longer works correctly.
    So we are wondering if it is possible for Windows 2008R2 Domain Controllers, running at a 2008R2 forest and domain level) to be able to audit when a programs are installed/uninstalled on clients and send alerts to our Admins?
    If so, How?
    Thanks in advance for your help!
    Pete Macias

    Hi Pete,
    >>So we are wondering if it is possible for Windows 2008R2 Domain Controllers, running at a 2008R2 forest and domain level) to be able to audit when a programs are installed/uninstalled on clients and send alerts to our Admins?
    As far as I know, group policy can't help us do this. If you are interested, we can take a look at System Center Operation Manager and ask for suggestions in the following SCOM forum.
    Operations Guide for System Center 2012 - Operations Manager
    https://technet.microsoft.com/en-us/library/hh212887.aspx
    System Center Operation Manager
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
    Best regards,
    Frank Shen 
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Error in bdc (Background processing not possible for material)

    Background processing not possible for material with serial number reqmt
    Message no. M7419
    Diagnosis
    You tried to enter the count for a material managed with serial numbers using background processing. This function is not supported.
    Procedure
    Use the transaction 'Enter inventory count' (MI04) to enter the count for materials managed with serial numbers.

    Can You Run this BDC in Foreground Mode
    I am doubtfull for that.
    please check
    Gaurav Sood

  • Is it possible to have  2 different account for the developer program?

    Dear All,
    I would like to Know if I can have two different account for the Developer program?
    I am signed in as developer for my company, but I would also like to have my private account to pubblish my private stuff.
    DO you Know if it's possible?

    Those should be considered two separate/different accounts, so yes, you can do that. It's just money at that point

  • Is it possible for a iPod touch to get a virus when downloading free games off the internet? If yes, is there an antivirus program to protect the ipod. and can some of the current apps be saved from the virus damage?

    Is it possible for a iPod touch to get a virus when downloading free games off the internet? If yes, is there an antivirus program to protect the ipod. and can some of the current apps be saved from the virus damage?

    I had one game permanently just stop working, it usually does crash, but that last time it just went bad, I don't know the reason, I tried powering off iPod, relaunching game, but the game never worked again. I think it corrupted its own save file or some of its own data.
    Have you tried another game or app, do those work? If they do, then I guess you know where the problem lies, but if they all stop working, then what about apps, can apps launch?
    Lastly, apps from the app store are checked by Apple, so they are clean.

  • Is it possible VB as FontEnd(GUI) java as background program(RMI)

    HI
    My client have Vb application ..
    they want Vb as Fornt End (GUI) After than background program must me java
    is it possible . if so pls tell me
    thanks in adv
    regards
    kedar

    Try SOAP instead of RMI. They both do the same thing, namely remote-procedure-call, but RMI requires Java on both ends, while Soap is cross language.
    - David

  • Background program is not working properly,when i am using job_open ,submit

    hai ,
    i am using job_open ,submit and job_close for scheduling one program background and use submit to another program ,all are working properly but it is working as a forground program not as abackground program. i want to work it as a background program.
    plz give a solution.

    Hi,
    Please find a sample program format for executing a submit program in background.
    DATA: number           TYPE tbtcjob-jobcount,
          name             TYPE tbtcjob-jobname VALUE 'JOB_TEST',
          print_parameters TYPE pri_params.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = name
      IMPORTING
        jobcount         = number
      EXCEPTIONS
        cant_create_job  = 1
        invalid_job_data = 2
        jobname_missing  = 3
        OTHERS           = 4.
    IF sy-subrc = 0.
      SUBMIT submitable TO SAP-SPOOL
                        SPOOL PARAMETERS print_parameters
                        WITHOUT SPOOL DYNPRO
                        VIA JOB name NUMBER number
                        AND RETURN.
      IF sy-subrc = 0.
        CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
            jobcount             = number
            jobname              = name
            strtimmed            = 'X'
          EXCEPTIONS
            cant_start_immediate = 1
            invalid_startdate    = 2
            jobname_missing      = 3
            job_close_failed     = 4
            job_nosteps          = 5
            job_notex            = 6
            lock_failed          = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDIF.
    Thanks & Regards,
    Harish

  • Is it possible for me to swap out the apple logo in the message screen saver with my company's logo If so, how? Thanks!

    Is it possible for me to swap out the apple logo in the message screen saver with my company's logo? If so, how? Thanks!

    How long will my iPod service take?
    If you choose to use the Online Service Assistant, or service via Apple Technical Support: If your iPod is not personalized, you can expect service to be completed within approximately one week from the time you send your iPod to Apple. If your iPod is personalized, you can expect service to be completed within approximately ten calendar days from the time you send your iPod to Apple.
    Attention iPod shuffle customers: Service for iPod shuffle is performed by means of an express replacement program, via Online Service Assistant or Apple Technical Support. For more details, please review the Express Replacement Service tab on the left.
    Above from:
    Apple - Support - iPod - Service FAQ
    If it is caused by a hardware problem there is nothing you can do to prevent it from recurring unless it was caused by abuse like from dropping the iPod.
    Otherwise make sure you ask apple how they fixed. it.

  • Creation of  'Transport Request' for an lsmw program.

    Hi all,
        I have created an LSMW program, and created a 'Transport Request'(throuh the option : Extras -> Generate Change Request).
    But, the Transport Request did not create any Subtask for the 'LSMW program'; Instead The TR has created a listing of 'Table Contents' under 'Object list of request'.
    I need to know how i can create a subtask for the LSMW program in the Transport Request. And, in the absence of the subtask(like in my current situation), is it possible to transfer the contents of my LSMW program from my system to another system without suffering any loss of data?
    Thanks and Regards,
    Abhinay.

    This is standard behaviour for LSMW transports, no task is created, all relevant table entries reside directly under the transport request. Be aware that always an entire project including all subprojects and objects in being transported.
    Thomas

Maybe you are looking for