Is it possible to access inbuilt hard disk drive in Apple Airbook

is it possible to access inbuilt hard disk drive in Apple Airbook

Kamal666 wrote:
Yes i would like to access contents, files or etc... on hard drive or inbuild flash drive, Same like Windows my computer hard drives access
Finder Preferences > General > check "Hard Disks"

Similar Messages

  • Increase the hard disk drive capacity on a MacBook Air

    is it possible to increase the hard disk drive capacity from 64 to 128 G? How do I do it?

    It would appear Apple does not intend for you to do it.
    It might be possible, if expensive.
    I would consider an external drive.
    increase flash storage on macbook air
    Can one upgrade Flash Storage
    Re: macbook storage upgrade??
    increase flash storage on macbook air

  • Access external USB hard disk drive with REISERFS Linux filesystem.

    I recently bought second-hand an older MBP Pro (2006 model) with Tiger installed, which I use as a desktop system at home and I would like to be able to connect an external IOMEGA 500 GB hard disk drive to it and have read/write access to its contents (mostly video / picture / music files). I spent a while searching on the Internet for solutions - nothing usefule came up. Does anyone in here have any ideas on how to do this? Is it possible at all after all?
    P.S.: Apart from this older MBP Pro, I also have a newer model (bought in early 2008) with Leopard installed - I wouldn't mind finding some solution on my problem on that OS instead...

    Hi,
    The two ways I can see to possibly do it are to network the Linux machine & Drive, then use Samba to access it.
    By using the Mac OS X Virtual File System (VFS) capability and writing kernel extensions, you can add support for other file systems. Examples of file systems that are not currently supported in Mac OS X but that you may wish to add to the system include the Andrew file system (AFS) and the Reiser file system (ReiserFS). If you want to support a new volume format or networking protocol, you’ll need to write a file-system kernel extension.
    http://developer.apple.com/documentation/Darwin/Conceptual/KernelProgramming/Fil esystem/chapter12_section1.html

  • How can i access the hard disk and know the no of partitions

    sir
    i want to access the hard disk and know how many parttions the hard disk have means c,d,e,f,g or may be c,d,e? also volum no or serial no.
    but i do not know how?
    plz help me and send me a code
    thanks in advance
    if this quesstion is not related to this forum plz guide me that where i put this quesstion?

    You figure out how to do it on your OS using C/C++ code.
    Then you write a wrapper in JNI to call your C/C++ code.

  • Is it possible to upgrade the internal Hard disk drive on the iMac

    Is it possible to upgrade the internal Hard disk drive on the iMac?

    Yes but it's definitely not advised. If you have a machine newer than 2009 Apple uses drives that have integrated heat sensors. This makes upgrading much more difficult but not impossible. If you have a machine still under warranty then definitely DO NOT do this yourself as you may void the warranty not to mention it isn't for the faint of heart. Take the machine to an AASP to have the work done, you will need to find one in your area willing to do so.
    If you are considering a new machine then simply buy the configuation you need.

  • Accessing of Hard DIsk Serial Number

    Dear Readers,
    I develop Client Server Applications. I would like to know how we can access the hard disk from an application so that I get the Serial Number of the Hard Disk, the Floppy Disk number, CD Rom Drive Number and Network Card Number.
    Please suggest.
    Yours Truly,
    Sarwottam

    Hi!
    There is now way to use 100% Java to access such things as Network Card Number etc. If you are willing to make sacrifice the platform independance, just Java Native Interface (JNI). This way you could use some C or C++ library that has access to the hardware. Note that it?s only the server that could access the hardware. . You could connect from the client to a server using a socket for sending and receiving data.
    Tip: Get "Essential JNI" by Rob Gordon if you want a book on JNI. It's a little hard to read, but I believe that's the best book on the subject.
    Regards
    Johan

  • HT5628 Is it possible to format entire hard disk and install windows 8 only in mac mini?

    Is it possible to format entire hard disk and install windows 8 only in mac mini?

    You can, but it's not recommended. If you are going to use Windows all the time, at least give some GBs to OS X, because you will need it to install firmware updates.
    Use Boot Camp Assistant to create a Windows partition. You can find it in /Applications/Utilities. Then, follow Apple's steps to install Windows 8 > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf You must use a 64-bit version, and note that not all Mac minis support Windows 8. Check if yours is supported > http://support.apple.com/kb/HT5634?viewlocale=en_US&locale=en_US
    Boot Camp Assistant will ask you to download the Windows support software onto a USB drive. You will need to install it in Windows, so it's very important to download it. If not, you will have problems in Windows.
    If your Mac doesn't support Windows 8, install the Windows version the site gives you

  • Is it possible to have multiple partitions on my hard disk drive and use Bootcamp to install Windows?

    Hi all,
    Here is my question: I have MBP early 2011 and was trying to install Windows 8 using Bootcamp but the option to install Windows is grayed out so I can’t click the box next to “Install or Remove Windows 7.” Is this because I have multiple partition on my hard disk drive? Is there anyway I can install Windows 8 using Bootcamp without deleting my partitions on my hard disk?
    Few more details:
    Mountain Lion 10.8.2
    Bootcamp 5.0.0
    Thanks for your response

    You can't create a Boot Camp partition on a drive you've already partitioned, and you can't install Windows 8 through Boot Camp at this time.
    (71680)

  • Comparison of SSD with hard disk drives

    Attribute or characteristic
    Solid-state drive
    Hard disk drive
    Spin-up time
    Instantaneous.
    May take several seconds. With a large number of drives, spin-up may need to be staggered to limit total power drawn.
    Random access time[45]
    About 0.1 ms - many times faster than HDDs because data is accessed directly from the flash memory
    Ranges from 5–10 ms due to the need to move the heads and wait for the data to rotate under the read/write head
    Read latency time[46]
    Generally low because the data can be read directly from any location; In applications where hard disk seeks are the limiting factor, this results in faster boot and application launch times (see Amdahl's law).[47]
    Generally high since the mechanical components require additional time to get aligned
    Consistent read performance[48]
    Read performance does not change based on where data is stored on an SSD
    If data is written in a fragmented way, reading back the data will have varying response times
    Defragmentation
    SSDs do not benefit from defragmentation because there is little benefit to reading data sequentially and any defragmentation process adds additional writes on the NAND flash that already have a limited cycle life.[49][50]
    HDDs may require defragmentation after continued operations or erasing and writing data, especially involving large files or where the disk space becomes low. [51]
    Acoustic levels
    SSDs have no moving parts and make no sound
    HDDs have moving parts (heads, spindle motor) and have varying levels of sound depending upon model
    Mechanical reliability
    A lack of moving parts virtually eliminates mechanical breakdowns
    HDDs have many moving parts that are all subject to failure over time
    Susceptibility toenvironmental factors[47][52][53]
    No flying heads or rotating platters to fail as a result of shock, altitude, or vibration
    The flying heads and rotating platters are generally susceptible to shock, altitude, and vibration
    Magneticsusceptibility[citation needed]
    No impact on flash memory
    Magnets or magnetic surges can alter data on the media
    Weight and size[52]
    The weight of flash memory and the circuit board material are very light compared to HDDs
    Higher performing HDDs require heavier components than laptop HDDs that are light, but not as light as SSDs
    Parallel operation[citation needed]
    Some flash controllers can have multiple flash chips reading and writing different data simultaneously
    HDDs have multiple heads (one per platter) but they are connected, and share one positioning motor.
    Write longevity
    Solid state drives that use flash memory have a limited number of writes over the life of the drive.[54][55][56][57] SSDs based on DRAM do not have a limited number of writes.
    Magnetic media do not have a limited number of writes.
    Software encryption limitations
    NAND flash memory cannot be overwritten, but has to be rewritten to previously erased blocks. If a software encryption program encrypts data already on the SSD, the overwritten data is still unsecured, unencrypted, and accessible (drive-based hardware encryption does not have this problem). Also data cannot be securely erased by overwriting the original file without special "Secure Erase" procedures built into the drive.[58]
    HDDs can overwrite data directly on the drive in any particular sector.
    Cost
    As of October 2010, NAND flash SSDs cost about (US)$1.40–2.00 per GB
    As of October 2010, HDDs cost about (US)$0.10/GB for 3.5 in and $0.20/GB for 2.5 in drives
    Storage capacity
    As of October 2010, SSDs come in different sizes up to 2TB but are typically 512GB or less[59]
    As of October 2010, HDDs are typically 2-3TB or less
    Read/write performance symmetry
    Less expensive SSDs typically have write speeds significantly lower than their read speeds. Higher performing SSDs and those from particular manufacturers have a balanced read and write speed.[citation needed]
    HDDs generally have symmetrical read and write speeds
    Free block availability andTRIM
    SSD write performance is significantly impacted by the availability of free, programmable blocks. Previously written data blocks that are no longer in use can be reclaimed by TRIM; however, even with TRIM, fewer free, programmable blocks translates into reduced performance.[25][60][61]
    HDDs are not affected by free blocks or the operation (or lack) of the TRIM command
    Power consumption
    High performance flash-based SSDs generally require 1/2 to 1/3 the power of HDDs; High performance DRAM SSDs generally require as much power as HDDs and consume power when the rest of the system is shut down.[62][63]
    High performance HDDs generally require between 12-18 watts; drives designed for notebook computers are typically 2 watts.

    I wish I could get my head round the SSD vs HDD with a NLE rig.  My builder is trying to persuade me to use a Toshiba 256Gb THNSNC256GBSJ for OS and programs, and it is only NZ$20 more expensive than the 450Gb 10k rpm VelociRaptor I was originally planing to use for the OS.  That sounds suspiciously cheap to me, and I am concerned about the finite writes to SSD - mainly because I don't really understand it.  
    The rest of the new build is
    3930K
    Gigabyte X79-UD5
    8 x DDR3 1600
    Coolermaster with 750W PSU
    Geforce GTX570
    I plan to transfer the drives from my current system as a starting point, and reassess after giving it some use.  That means
    Either the above SSD or 450Gb 10k Raptor for OS (new drives)
    300Gb 10k rpm Raptor  (currently used for OS in old box)
    150Gb 7k4 rpm Raptor (reserved for Photoshop Scratch in old box)
    2 x 1Tb WD Blacks (data drives)
    2 x 1Tb WD USB3 externals
    I don't know how I would configure the drives in the new box, but have seen Harm's table and will try to follow his advice.  It's a dreadful thing to admit, but I don't have a backup strategy, and the above drives are well over half full. Well over!  And I am only just getting serious about video, (the rest is mainly CR2 files from my Canon 1Ds3 and 1D4)
    I know it must be like banging your head against the wall, but should I avoid that SSD and go with the 450G Raptor?   I have read a comment that the WD Blacks don't work well as Raid0.  Is that BS or true?
    I am about to give the go-ahead so need to confirm the spec.

  • Just bought a Lenovo 3000 N200 without a hard disk drive, need software

    I just bought a Lenovo 3000 N200 Type 0769-BLG assembly date 07/09 from e-bay, it looks brand new but it had a fault, it was dead, perhaps a faulty motherboard and the hard disk drive had been removed.  Assuming I can get the fault fixed, where can I get the Lenovo software that came with the original hard disk drive, I would prefer a free source, if that is possible, perhaps some kind person has put all of the CD's on to a DVD that I can borrow or buy a copy of. I was an IBM employee for 30 years before retiring 15 years ago. Dan McLean in Scotland, UK.

    Call customer service directly to get a quick solution for this.
    IPnaSh
    First Spanish Community Guru - Colaborador ad honorem

  • Replacing SSD with hard disk drive on Qosmio X505-Q880

    Is it possible to replace the SSD drive in a Qosmio X505-Q880 with a hard disk drive?  If so what type will work?
    Thanks,
    Ed

    Yes. I just replaced my 60 gig with a Kingston 240gig from Amazon. Re installed Windows 7 Ultimate. I DID NOT use the recovery disk from Toshiba because there were many programs that did not suit my needs, excellent though they were. It runs very fast about 4 times as fast as my old drive.

  • I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my 10.6.8 back

    I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so

    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.

  • Mac OSX wont reognise my internal hard disk drive

    I have a problem where for some reason when I start up my Macbook Pro (intel core duo) it does not detect the internal hard disk drive at all. I have run a hardware test and it shows no problems whatsoever. I have tried resetting the PRAM etc and to no avail. Yesterday the system hung and I tried to force quit and it wouldn't do anything so eventually I held down the power key and when it tried to reboot this is the problem I was faced with (it would boot up with the "no entry" sign). I accepted complete defeat and went to completely re-install OSX however it doesn't even show the internal hard drive when I wait for it to give me install destinations. I had tried seeing the hard drive through disk utility however it only shows the install DVD and that's it in the sidebar. I resigned myself further to thinking either the logic board or the HDD had packed in all and I took it round to my brother in law to see if there is anything he could do without opening the machine (he is Oxford educated and writes programmes etc so is very knowledgable), now this is the part that has miffed us both, he started it up using a Linux disc and once running, Linux see's the hard drive with no problems. He has been able to access the HDD with absolutely no problems under Linux both reading and writing to it. I even took my Mac Mini round and he booted them both up in Linux and completely copied Mac OSX from the mini to the macbook pro but still when I try booting up its as if the HDD isn't even there. Why can Linux see the drive and not Mac OSX? Please don't be affraid to get very technical in your answers as they may mean nothing to me but will probably all make sense to my brother in Law. Any sugestions at all would be greatly accepted.

    Dear mcdkev,
    You guys may have made a big error cloning the Mini HD into the MBP. They both have very different drivers and hardware settings and their OS X versions are customized to fit the hardware. That is why each mac comes with it's own version of OS X and their backup disks. That's a reason why it did not work.
    Ok, so now that you do not have any of the original info on the MBP try the following:
    Use linux to scan the disk surface & repair any problems.
    Reformat the drive as DOS or FAT 32. (I wouldn't go into any linux specific format unless you can "Apple" format it, which I don't think linux has that option.)
    Now, the MBP should be able to see it's drive...
    boot from the OS X DVD , from the Utilities menu choose Disk Utilities, partition the drive as GUI file system (in case the linux format made the drive a "system boot record", you do not want that... )
    Then format the drive as "OS X Extended Journaled"
    Now go back to install and install your original basic set of OS X (the factory default).
    *If nothing works, please do take your MBP to the Apple store or to a certified tech before you do more damage to the drive and it becomes unusable ...*

  • Qosmio X500/00X System Recovery (Factory Reset) From Hard Disk Drive or Separate Disk

    Hey Guys,
    Looking for your advice and any links if any...cheers in advance
    My Situation
    In December 2009 I purchased a Toshiba Qosmio X500 - Model No. PQX33A-00X00J
    At the time I upgraded my purchase from Toshiba Reseller BD4U, going from the standard 1x 500GB Sata drive + 1x 64GB SSD... to instead having 2x 500GB sata drives. I purchased with 3 year onsite next business day warranty, that is is now expired.
    It came loaded with MS Win 7 Premium Home Edition - but no disks provided.
    My Needs
    I need/want to factory reset my PC - its starting to run slow
    I need to re-partition from my existing 4x partitions to just having 2
    The Issues
    Possibly as a result of upgrading the disk drives at time of purchase, I don't believe I have a hidden Recovery partition in order to do a System Recovery from the Hard Disk Drive - see image of my current partitions attached
    I don't have Win 7 OS installation disks or Toshiba Driver disks as they should have been installed by Toshiba
    My Questions
    Do You agree that I DONT have a Recovery Partition - when looking at the partition image? I'm confused on this point coz people say its hidden!?
    Given I have no Toshiba Drivers Disk or Windows 7 OS disks - what should I do? I'm thinking of downloading Win 7 (use my product key from sticker under PC) and making a disk/USB (but need to learn how)
    Is this where I get ALL necessary Toshiba drivers for my PC from?
    Does Toshiba provide a link on its site and instructions on where to get Win 7 from so I can make a recover disk??
    Notes
    Tried to email Toshiba support but at step 1 of their email process validation failed due to my PC being out of warranty so will call them on Monday instead
    THANK YOU THANK YOU, for any help you can give big ro small
    Cheers
    Rick

    WOW, thanks Macius for that great, full and thorough reply...cheers mate
    I suspected I didn't have a recovery partition - so thanks for confirming it as I planned to risk it and try! I guess it doesn't really matter why, and it would be futile to go and blame the re-seller or Toshiba at this late stage in the game in hopes they would help...
    Yeah, I just went to Microsoft Software Recovery hoping to download Win 7 OS and create a recovery disk but of course Microsoft would NOT allow it due to it being software that was pre-installed on the device blah blah blah (see error image)
    And I didn't bother back then in 2009 to create recovery media as you wisely descibed, mostly due to laziness and mentally putting it in the 'too hard basket'...I didn't really understand it - or much about computers at the time.
    Re - your Option #2 - thanks for confirming Toshiba drivers. I could/can do this - but don't really want to buy something I already have, perhaps I'll check out ebay or see if a friend has a disk
    Re - your Option #1 - I'm currently based in Vietnam and wont be back in Oz till late in the year, so will see if I can find a reliable Toshiba service provider here - but wont hold me breath on this one
    I'm thinking that IF Option #1 is a No-Go then - maybe Plan B or Option #3 could be:
    Do an Audit of Programs to identify those I don't need and can safely remove - then remove using Control Panel/ Remove Programs tool
    Reformat all other drives (not C:// where OS is)
    Then use some re-partition software e.g. Disk-Partiton.com
    Any final thoughts???
    Anyhow - thanks very much again
    Rick

  • Verify physical hard disk drive health MCS 7825-H3 that installed CUCM inside it

    Hi Everyone,
    I have Cisco MCS 7825-3 that installed CUCM ver 6.1.1 inside it. A few days ago the system was crashed and have been recovered. And the symtomp why the system crashed is because corrupted hard disk drive. Now the system is running well.
    I want to verify the health status of hard disk drive MCS 7825. The logical drive is RAID 1 with 2 chunks (channel 0,1 and channel 0,2). So that i did the test to shut down the cucm and unmount on of the physical hard disk drive. After that i power on the server and running the system with just 1 hard disk drive (example just channel 0,1 and after verify channel i do the same task with channel 0,2). With just 1 hard disk drive if i show hardware in cucm cli , it showed that status of logical drive is degraded. But the system can run well (IP Phone registered and can do pbx features). And after do verify test with 1 hard disk drive, i mount the physical hard disk drive again so that the system running with all of hard disk drive mounted (2 chunks).
    At first it showed in cucm cli that status of logical drive is degraded, but with current operation rebuild (indicated RAID 1 is rebuild again by the system). After up to 1 hour the process finished and the status of logical drive is optimal again.
    The question i wanna ask, is there any method to know if the health of physical hard disk drive of MCS good or not beside the task i have done ?
    Maybe we can show in the BIOS or cucm cli because i didnt find diagnose of physical drive in cucm cli but it can diagnose status of RAID, hard disk space and list file in hard disk drive.
    Thanks for your help.
    Best Regards,
    Luthfi
    - See more at: https://supportforums.cisco.com/message/3871634#3871634

    Hi Luthfi,
    Do you find a way to check the hard drives and RAID of this CUCM server. I have also 7825-H3
    Or it is as I think that I need to create remote access configuration ?
    Thanks
    Haitham

Maybe you are looking for